IP Conflict With Daisy Chained Netgear CGD24G Wired / Wireless Cable Modem
Oct 15, 2012
I'm attempting to connect multiple computers, laptops and printers to the same LAN. I currently have the switch daisy chained to the modem. I'm having issues with conflicting IP addresses and wireless access. I think I have to create static IP addresses but don't know which nor how.The hardware I'm seeking to have on one LAN:
- Netgear CGD24G Cable Modem from Time Warner
- Netgear GS116E un-managed switch
- iMac OSX 10.8.x
- Dell PC desktop, Windows 7
- Sony Vaio PC desktop, Windows XP
- Dell PC desktop, Windows XP
- Sony Vaio laptop, Windows 7 Pro
- MacAir OSX 10.8.x
- MacBook Pro OSX (not sure which OS version)
- HP JetDirect 300x Print Serve (hooked up to HP LaserJet 2300)
- Epson Artisan 835
- Netgear Universal Adapter for Home Entertainment (SAVB5004)
- Netgear Powerline 500 Nano
- Apple iPhones (4 of these)
- Apple iPad
Several of these can work wirelessly, though I prefer wired whenever possible.I have been getting IP address conflict notices as well as the wireless signal not being received on some of the wireless capable devices, which seems to be random but it could be that I just don't know enough to recognize a pattern. I believe the devices are all set to automatic assignment of IP addresses.What is the correct way to daisy chain the cable modem and switch?What is the correct protocol for assignment of IP addresses in order to avoid IP conflict?Why does my wireless drop on some of the wireless-capable devices (such as the iMac, MacAir or Sony laptop)?
View 2 Replies
ADVERTISEMENT
Jul 12, 2011
I have a question regarding two daisy chained routers. In the downstairs of my house we have our main internet connection that is hooked up to a router (router A). We also have an Xbox 360 hooked up to router A. Upstairs we have another router (router B) which is connected to router A. Connected to router B is a PC and another Xbox 360. Currently the downstairs Xbox cannot see the upstairs Xbox or PC. We used to have a network admin guy living in our house and the whole operation ran smoothly, however those days are long gone...
View 4 Replies
View Related
Nov 30, 2012
I have my main router hooked into a second router (main router LAN port to second routers WAN port). I have my NAS hooked into the second router via ethernet. Internet connections work well on both and I can see all devices that reside on the same LAN that Im connected to. How I can get devices on the main router to be able to see the NAS. Is there any way for devices that are connected to my main router to be able to see the NAS given that the NAS is hooked into the second router?
View 3 Replies
View Related
Jan 7, 2011
I have a Netgear CGD24G Wireless Gateway and a Gateway MA8 laptop with after-market Windows 7 (Vista got a virus, went ahead and upgraded.)Now, when I download 100 MB files on my Xbox 360 (Which is wired to the modem) it will be downloaded in a couple minutes, or less. The other computers in my house (There are plenty, and even more that come and go.) get a blazing internet connection, and most of them are wireless.Now this computer, which had an extremely quick connection as well all of a sudden dropped off, while the rest of the computers remain fast.I've gone to Speedtest.net before and after this occurred and my speed before was around 12 mb/s, and one time around 4 AM was even upward of 25 mb/s, all of these tests were performed multiple times on different server locations. I JUST did the speedtest, and it came back with .4 mb/s, and the UL speed was 2.0. I honestly can't remember what I averaged with it prior to the problem, but it was definitely higher as well
View 5 Replies
View Related
Jan 31, 2011
Is it possible to daisy chain 3 switches and not have ip conflict? I am running a public access network for a library. For certain library software I need for all workstations to see each other. I have 25 workstations in total and two separate management consoles. I have all workstations on two switches but one of the management consoles is on the third switch because when joined with the others it has an ip conflict. I need this console for the digital sender that is connected as well as to act as a server for go print software.
View 3 Replies
View Related
Oct 11, 2011
I'm trying to create a VPN through a Cisco 861 but the problem is that the ISP forces me to use a SpeedTouch gateway ( as they use the MAC address for the authentication).By now, i'm getting OK pinging from client to 192.168.254.1, but I can't reach Internet.If I connect the client directly to the Speedtouch internet works properly. [code]
View 1 Replies
View Related
Feb 19, 2013
Nothing seems to be able to connect to my wireless network. It seems to have occurred after I installed a new copy of windows 7 onto my sister's desktop. A message appeared saying we have the same ip address. I've tried renewing our ip address on both desktop but it won't give us new ip address for some reason.
View 14 Replies
View Related
Jan 27, 2012
I am relatively good at installing and troubleshooting smaller sized networks... I am having trouble with one of my customer's networks and I think I have the problem narrowed down. r issues.I have a customer with a FS726T switch and ~20 computers connected to this switch running DHCP assigned addresses.The switch is assigning addresses in the 10.0.0.xx rangehe customer currently has an old T1 line coming into a Cisco router, which then directs traffic to port 20 on the switch.The problem is, we are replacing the old T1 line with a newer 50mbps cable connection.The cable company pre-configured their router with a static IP address the 68.116.xx.xx range. The Subnet is also different than the Netgear's subnet. I would like to keep the old T1 connection in place. I believe they have data that needs to go to their mainframe/backbone server at corporate.
I cannot log in to the cable modem. IT is an SMC SMCD3G with a staic IP. I tried changing my PC's IP address to the same gateway but cannot get into the cable company's modem, even using a static IP with the same gateway as the modem's gateway address. I don't want to reset the modem/router and lose the cable company's settings.I am pretty sure for the devices to communicate, the following has to be true?:1) Cable modem and FS726T must be on the same 10.0.0.xx IP range?2) Cable modem and FS726T must be on the same 255.255.255.0 subnet mask?
View 7 Replies
View Related
May 8, 2012
I recently got a cable modem. It is Netgear CBC-382d1. It has one ethernet port and no wireless.I have 3 laptops (one will be using ethernet not wireless), 2 iphones, 1 ipad and a PS3 that needs to go online. All but one laptop are wireless. Which 300 Mbps wireless 4 port ethernet router is recommended?
View 5 Replies
View Related
Dec 19, 2011
Placing a second router behind a cable modem router combination.? My second router is a netgear WNR 2000 the first router is Netgear 1000.How should I configure the the WNR 2000?? Default settings?
View 1 Replies
View Related
Jan 5, 2013
I have a Netgear WNR612 wireless router, which worked fine for a few weeks. Then something happened and I can't keep the connection anymore. It happened right after I used iTunes to update my iPhone, perhaps a coincidence, but I'm mentioning that just in case. Internet still works fine with ethernet cable straight from the computer, only the wireless connection doesn't work. This happened about a month ago and I haven't been at home much to fix the problem. I have turned off and unplugged everything for several days at a time while gone. I get a Network Error message saying, Windows has detected an IP address conflict. I have tried restoring the router back to factory settings and reinstalling the wireless card. I have tried changing the IP address settings both in the Network and Sharing Center and the router admin page. What I think I should do is change the IP address in Command Prompt, but when I type "ipconfig /release", it says "No operation can be performed on Wireless Network Connection 2 while it has its media disconnected" and the same for Local Area Connection. I don't understand what this means, because there is a wireless key in my keyboard and there is a white light (not orange) like there should be. Also in the Network and Sharing Center, I can see that the connections are enabled.
View 14 Replies
View Related
Feb 4, 2011
I have a Netgear DG834PN Router. Connected to it usually are 2-3 laptops (XP, Vista, 7) wirelessly, a Xbox 360 and Win 7 PC via cables, a wireless printer and often an iPod touch, however PS3s, mobile phones etc are connected occasionally.
It had been functionally normally.until we changed ISP after ours was taken over (we didn't change but the provider obviously now has). However, since then (1st Feb) we've been having connection issues, probably an IP address conflict where items can access the router but not the internet.
The iPod and Xbox sometimes don't connect, as do the laptops often after been powered up from a sleep. Yesterday, when powering up one of the laptops, I got an IP address conflict message. Restarting the router sometimes works, but mostly it allows one device on and not another.
The printer has a static IP address (192.168.0.4) that I had to set up to get it working, but this has been active for months now without issue. I've had a look in the router settings and it's set up for DHCP as default with IP addresses from 192.168.0.2 to 192.168.0.254 so I don't understand why it has this issue suddenly. I had a look at the connected devices list, and everything appeared to have its own IP address.
View 13 Replies
View Related
Jul 17, 2011
I cannot connect my Dell Inspiron 1300 through the NetworkManager "wired" connection, when I try to go direct to the cable modem. It fails to connect. If I connect the cable modem to my (linksys WRT54GS) wireless router, and then connect my laptop to a wired port in the router, it connects in seconds, successfully, This has happened to me 2 other times, when I tried to connect my laptop to a client's cable modem, because my client did not have a wireless router available, in their home. My wireless works fine. This has me perplexed. I'm using Ubuntu 10.04 LTS and NetworkManager Applet 0.8, I've tried some things to see what is going on, such as "ifconfig" "dhclient" as well as modifying the "Auto eth0" parameters and adding my laptop's MAC address, etc.
View 5 Replies
View Related
Mar 25, 2011
I have a Netgear 600 dual band router connected to a DOCIS 3.0 cable modem with a 25mps internet connection from my ISP, should be fast right? When I run a speed test on my comp I get 10-13 mbps download on average. Here's the issue, upon visiting my mothers house and running the same speed test I got very similar results. She is running a Lynksys G router on a DOCIS 2.0 cable modem with 12mps connection. My question is, how can this be so, am I at the limits of my comps g network card? as a disclaimer I would like to note I am connected to the G band on both routers.
View 1 Replies
View Related
Feb 5, 2012
im recieving ip conflict adress error i have an dsl modem and its my individual i ave not share a connection with anyone.and whenever i recieved this error my net works zero
View 1 Replies
View Related
Mar 14, 2013
Our family has about three computers that use a wireless network that we all share. We have an old Gateway, a WCG200, that is bridged to an E2000, which was set-up ever since we required better security when someone used our connection to illegally obtain movies. We got a letter which warned us of any future violations that could cause legal action, so we looked into our wireless connection to better secure it from any other individuals outside of our household. The WCG200 is connected to the outlet in the wall via cable, and then connects from the Ethernet to the E2000. The E2000 has a stronger security setup than the WCG200, which is the advice we received from our ISP and would allow us to keep the Gateway. It provides a strong signal, but from time to time, we suffer latency or slow loading through all of our online devices, even though our connection speed displays a solid 72.0 Mbps. I've tried the Event Viewer to see any problems, and I have noticed some small things:
- WLAN AutoConfig service has successfully stopped.Wirel?
- WLAN Extensibility Module has stopped. Module Path: C:WindowsSystem32cmihvsrv64.dll
- The server {E10F6C3A-F1AE-4ADC-AA9D-2FE65525666E} did not register with DCOM within the required timeout.
- Broadcom NetLink (TM) Gigabit Ethernet: The network link is down. Check to make sure the network cable is properly connected. [This last one is strange, since I use the Wireless Network Connection with a DW1501 Wireless-N WLAN Half-Mini Card, while the Broadcom adapter is under the Local Area Connection and displayed as not connected.]
Other than that, I'm not quite sure what the recurring problem comes from. Our WCG200 has a firewall enabled and our E2000 has an SPI firewall enabled. The security mode of the E2000 is a WPA2 setup. We have disabled the wireless network of our WCG200 in order to make use of the E2000.
View 9 Replies
View Related
Mar 15, 2012
I have Desktop and Laptop connected to a Huawei-make,Model No Smart AX 882, ,via ethernet & USB port. Is it possible to convert the same ADSL wired modem into a wireless modem for my Laptop. the type of hardware to be used (e.g., wireless access point or a wireless router) through my USB port in the wired modem? what is the configuration change I have do in my wired broad band modem?
View 1 Replies
View Related
Jan 27, 2012
I am trying to set up my wireless network but I need updted firmware downloads for the Net Gear modem model CGD24G
View 1 Replies
View Related
Dec 9, 2011
I have my internet hooked up to a DSL Modem and a Wireless Router. But I had configured the Wireless Router wrong that I couldn't connect to it using a WiFi. I was going to reconfigure it but the Netgear Router was outdated that their reconfiguring URL no longer existed. So I went out and got a *NEW* Netgear Router. Prior to the *NEW* Router I had a Laptop and a PC connected via DSL Cable connected in the Wireless Router. Now with the *NEW* Router I had just purchased I connected everything just like I had done with my previous Router. Wireless Connect works great but I can't connected using the DSL Cable connection. It does not respond. I tried connecting the cables to different ports but it didn't work. My PC mainly needs the wired connection cuz it's where I play my Online games. I tried playing with my Wireless connect but it lags very bad. How to get the wired connections to work? Netgear N600 Wireless and Dual Band Router
View 3 Replies
View Related
Nov 26, 2012
I need to extend my wireless N network to increase the wireless reception power to a VIZIO Smart HDTV. I currently have a Linksys WRT310N router that is just barley being seen by the TV, Sometimes yes and sometimes not.I have just ordered a Linksys EA3500 Smart Wi-Fi Router. I want to set the EA3500 as the 1st (primary) router and CAT6 cable connect the WRT310N 50 ft closer to the HDTV.
View 1 Replies
View Related
Nov 26, 2011
I have set my WLL modem to connect automatically to my laptop when switched on. It does connect and work well until there is another modem in the neighborhood coming online.The task bar icon shows I am still connected but the connection is gone. I tried troubleshooting the network, reconnecting from laptop giving the passkey, log off and log on but none of these work, except restarting the modem. This has become a pain and has been so since I purchased this 4 months ago.Is there a setting change that can be done?
View 1 Replies
View Related
Dec 2, 2012
How to connect wireless modem in place of wired modem
View 1 Replies
View Related
Jul 26, 2012
I have a wired ADSL modem+router, and also a Linksys WRT54G2 V1 router. How do I connect them such that I get a working wifi available?
View 1 Replies
View Related
Jan 6, 2012
Just got cable and new hardware and been running bandwidth tests. I know wired is always going to be faster than wireless but was wondering if there were things I can do to see where the bottleneck is.
I have cable internet with a sb6120 modem and the asus rt-n56u router. When I go wired, I get 40+mbs down and when I go wireless I'm getting approx 20mbs down. Dont get me wrong, this is more than adequate but was wondering why the huge difference. I'm not anywhere close to the theoretical max.
The rt-n56u is on firmware 1.0.1.7f which is current. My desktop uses the WMP600n and my laptop has the Intel 5100 AGN built into it - both have updated firmwares.
View 12 Replies
View Related
Jan 1, 2012
Actually I've a WiFi enabled (Nokia) Mobile phone. I also have a internet enabled USB modem (HUAWEI) & a Netgear Wireless router.I am using internet with this USB modem in my desktop PC at home.But now I want to use internet in my mobile phone. So, I bring that wireless router.
View 3 Replies
View Related
Aug 11, 2011
I am using two desktops. One is an old Windows XP running SP3, and the other is a new Windows 7. Neither PC is wireless. I set up the modem through the Windows 7 computer, and it is connected to the wireless modem through the Ethernet cable. (I hope that I am saying all of this correctly.) It's running just fine.Because the other PC is not wireless, I purchased a NETGEAR wireless USB adapter, go through installation and setup, starts and finds my SSID, add WEP key, etc, etc. In the bottom corner of the software it says the signal is good. In the toolbar it says the adapter is connected to the modem.Next to it, though, the network connections icon shows:
Wireless Network Connection
Speed: 24Mbps
Signal Strength: Good
Status: Limited or no connectivity
And so, of course, I have no connection to the Internet. Using the modem through Ethernet on the XP computer (switching the situation around, in other words) is not an option; the only phone line for connecting the modem to the wall is too far away.(It was stated more than once that I should use WPA instead of WEP; I haven't made it that far yet... I'm just trying to get this other computer connected.)
View 6 Replies
View Related
Dec 13, 2012
I have a modem Scientific Atlanta 2100. I just installed windows 8 pro 64bit and when installing the driver to use the usb cable modem does not recognize it and simply not installed. I wonder if it is possible to use my usb cable modem or simply incompatible with my windows 8 64bit pro.
View 3 Replies
View Related
Apr 23, 2013
With this modem, can you hook up to the Linksys Smart Apps WiFi?
View 2 Replies
View Related
Oct 3, 2012
Basically what is happening is I have a fiber decoder whitch goes into My belkin modem which controls my phone and Internet and with the company I am with we need that modem, I also have a netgear router so I can have wireless through my house but I want to plug LAN into the belkin router and still use the netgear for transmitting wireless.In short I want LAN in belkin but still have the netgear transmitting wireless and everything on the same network,E.g I have a pioneer amp and I use the iPhone app icontrol over my wireless but I can't because the amp is plugged into the belkin and the app is using netgear.
View 1 Replies
View Related
Feb 2, 2013
I have two netgear wireless modem / router. I want to connect my internet, NAS and Media player on one device (netgear modem/router) and want to link the other netgear in my bedroom and connect another media player and also use the internet via primary netgear modem/router wireless connectivity.
View 1 Replies
View Related
Mar 24, 2011
I inherited a BEFCMU10 v.3 cable modem from my boss who switched to FiOS and I would like to use this with my Comcast connection.All I received from him is the cable modem and power adapter, what do I need to install and get this cable modem working? My router is WRT-54G.
View 2 Replies
View Related
Mar 23, 2012
I can't get a new IP from my ISP when my Cable modem router(EPC3925) is set to router mode, i have tried factory restore, unplugged etc..but still no luck. It changes each time i reset it when i set it to bridged only mode but then i won't be able to connect other devices to it since it doesn't uses DHCP in bridged only mode. It changes back to the IP i had when i set it to router mode. I don't want to change my router settings to bridged only because it would disconnect the other devices in my house. Why my ISP assigns the same IP address when it's set to router mode but assigns different IPs when it's set to bridged only, how is this possible ?
View 1 Replies
View Related
Feb 7, 2012
I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
View 10 Replies
View Related
