Increasing Broadband Speeds Safely
Aug 25, 2011
[code] just came out with a new package called Roadrunner Broadband Extreme ($10 extra). The claimed speeds are 30GB down and 5GB up. I have a friend in another area of town who is getting these speeds consistently, although i will admit he lives in a much more "technologically advanced" area where there are several big technology businesses like IBM. I just had the service installed last week, and have even had the cable techs to the house, but i am not even close to getting what i paid for.On average a normal day i would test at between 14-17GB down and maybe 2.2 up (using Time Warner's speed test, on tests from places like Speakeasy the speeds show much lower).So the question after the long winded description is this. Is there any program i can use that may be able to safely tweak my system and get closer to the speeds i should be getting? I know i may never reach 30 down and 5 up, but if i could at least be in the 20's down and maybe 3.5-4 up.
View 12 Replies
ADVERTISEMENT
Jun 7, 2012
This has been happening of late. When i check the status of my Internet Connection I notice that the sent bytes will be more than 200 and received bytes will be low as 2 to 4
View 1 Replies
View Related
Jun 25, 2012
I have recently changed ISP and am now with Sky. I have been having battles with Sky over my speeds - they said I would get between 4.5/9.0MB and I have been getting just 3.6MB. However, even this lower figure has changed over the past three days and I am only getting 1.6MB on the same PC which is based upstairs. I noticed that on my laptop I was getting 3.6MB downstairs and so I took it upstairs next to my PC and then obtained 3.6MB. Is there any reason I should be logging two drastically different speeds from the same location on two separate items of equipment? I started thinking it was the Philips SNU adapter on the PC which may be causing the problem but I have tried a spare adapter(same make & model) and I still get the lower reading.
View 8 Replies
View Related
Sep 11, 2012
I am receiving email with attachments from friends who could be more secure.I had a situation where their email was being intercepted and another time when they were forwarding adverts.Their knowledge is even less than mine when it comes to email. Is there a way I can move email attachments received by Thunderbird 10.0.2 to a safe place and read it as text only and not have it turn into a java executable or something?Also what is a good way to read such text files?
View 1 Replies
View Related
Apr 16, 2012
Does following link/procedure is valid for ASR1004 chassis (STEP4) and not just ASR1013 ?
[URL]
View 6 Replies
View Related
May 19, 2013
My Belkin F7D4301 Router has the fastest wireless speed of maybe 2MBps but wired with a cat5e cable to my asus laptop of almost 7MBps. I have a one smart TV, one blue ray, one roku, and a nexus 7 using the 2.4 channel.
My Wireless 2.4 settings are channel 11, Extension channel 7, Wireless mode N (have tried with just g and b, g, and n modes), Bandwidth 20/40, Protected mode on, QOS off.
I've talked to Belkin tech support, they are the ones who had me set up my 2.4 channel this way but my wireless speeds stay just under 2MBps, they just want to keep sending me the same model Router because they think each of the new ones they send me is defective.
Am I doing something wrong or is 2MBps the best wireless speed I'm going to get?
View 1 Replies
View Related
Dec 24, 2012
I have an IPAD, pc , laptop, mobile and my daughter comes over with her ipod and mobile.As I understand things my IP address range is not big enough and as a result my IPAD keeps dropping and saying not connected
View 14 Replies
View Related
Aug 31, 2012
what are the factors leading to bandwidth increase
View 2 Replies
View Related
Jan 20, 2011
When i check the status of my Internet Connection I notice that the sent and received bytes keeps increasing. I'm sure there are no downloads taking place that I'm aware of. No torrent clients, no antivirus nothing. I checked my PC for malware but that didn't work. As a result of this, i keep getting high pings in online games and can't even watch videos in youtube anymore. like, some software to monitor all the programs that use the itnernet connection without my knowledge or something??My primary concern is gaming (Call of Duty 4) so I wouldn't mind this idle downloading (whatever it is) as long as the major chunk of my internet connection is directed towards Cod4!
View 5 Replies
View Related
Jan 20, 2011
This has been happening of late. When i check the status of my connection, i notice that the "sent" and "received" bytes keeps on increasing when i'm idle. I'm pretty much sure there's no downloading of any sort in progress that I'm aware of. As a result of this, I can't watch videos in Youtube or play online games due to high ping.
View 6 Replies
View Related
Jan 24, 2012
I'm not sure about my title, it;'s the best I could come up with. I have approximately 7 computers, two iPhone, and iPad, wireless printers and a network attached storage. Most are connected over via wifi, the exceptions being one pc, the nas and a printer. I plan to add six more devices plus some ip cams. The way the router or network is configured whenever a guest connects to our wifi they can "see" our computers. I haven't been able to tell if they can see the files or just the name of the computer. Question 1: How can I tell if the guests are able to access the data on our computers or networked drive? Question 2: If I add a switch will I need to do anything special with regard to security?
View 1 Replies
View Related
Aug 15, 2011
My LAN speed was 100 Mbps but now it is 10 Mbps and too slow when I am using internet. So how can i increase the speed to 100 Mbps from 10Mbps?
View 2 Replies
View Related
Oct 19, 2011
My apartment complex offers free wifi but it is always unreliable, sometimes it is slow and I can't load pages. Often it says my signal is good or excellent and I still have problems. I'm pretty sure its not just my laptop because when I am home where we have our own network and my connection is great there. I have looked around on the internet for solutions and have not really found anything. All solutions say to do something to the router and I do not have access to it. I saw these things called usb wireless network adapters. Would they be able to increase my wifi connection?
View 1 Replies
View Related
Apr 11, 2012
We frequently camp at campgrounds that offer free WiFi, but many campsites are on the fringe of receiving a signal. Is there anything I can add to my laptop to increase receiving range- ie usb adapter with antenna?
View 2 Replies
View Related
Jun 25, 2011
I am using my ADSL Internet Connection especially for downloading files those past few months.I have even purchased an account at filesonic.However,the speed remain the same except that there are no waiting period and I can download multiple files at the same time.What are the tips for increasing downloading time? I am now using the latest 5.0 Firefox and Windows 7 and using or not using the download them all add-ons does not add much to the download time.
What about the telephone line cable? The position of the beetel modem, does that play a role in speed limit? Are there some hardware equipment that can cause a subsequent increase in download speed?
View 4 Replies
View Related
Dec 4, 2012
ok i have setup a subnet on my uncles network on which i am running a domain with server 2008. i am using a dlink di 624 router and wanted to know if i upgraded to a 300mbps router would this increase the bandwidth within my network?i know i am limited to what i am receiving from my uncle who is also limited to what he is receiving from the ISP. im not worried about internet speed. i want to increase client to server speed for both lan and wireless.
View 1 Replies
View Related
Nov 22, 2012
We have lms 3.2 that we are facing a problem with it. When we start the server the EDS-GCF log file size start to increasing rapidly until it consumes up all free space and it only stops when we stop the Daemon Manager service. I tried to do the pds how command but I get no output from it. I included the portion of the EDS and EDS-GCF log files. i searched and didn't find the cause of this error.
View 3 Replies
View Related
Jul 29, 2012
Why my OC3 interface is showing increasing output drops its starts happening as soon traffic exceed 60Mbps ( FYI my traffic never exceeded 75Mbps MAX, and circuit is 150Mbps from carrier , full OC3)
Below are few stats as starter. IOS i am using is c7200p-is-mz.122-31.SB10.bin
sh int pos1/1
POS1/1 is up, line protocol is up
Hardware is Packet over Sonet
[Code].....
View 17 Replies
View Related
Aug 4, 2012
Even without Open vSwitch, and using the stock, Linux bonding module with 802.3ad mode I had the same problem.
From what I have read about bonding, it seems like if you bond (for example) 2x 1Gbit Ethernet connections on two servers (ie so both have two ports bonded), then if using something like 802.3ad, a file transfer should utilize both ports, and you should see a throughput of 2 Gbit/s. So this would be an increase in throughput and bandwidth, right?
But, what I generally see, is for any single TCP connection, only one port is ever utilized at a time.So for example if I'm SCPing a large file from server1 to server2, I generally see that the scp session is only using one interface, at 1 Gbit/s. I can then also run a second SCP session which will use the second port, and also move at 1 Gbit/s.
This would be increasing the bandwidth, but not the throughput, correct?Which of these behaviors is what I should be seeing with 802.3ad? I guess it depends on the hashing method? Is there a hashing method which will allow a single connection to be spread over two interfaces, allowing 2Gbit/s transfers?
View 1 Replies
View Related
Dec 2, 2011
A small network and uses the Linksys Router BEFSR81 as dhcp.the default Number of addresses is 50 and starts 10.0.0.100 to 10.0.0.149.A new Cisco IP Phone just introduced requires ip addresses and have noticed running out of addreses.Can I increase the number to 120 so that the address range would start from 10.0.0.100 to 10.0.0.219, also, I have a VPN device which automatically configures itself for 10.0.0.199 address and this is /24 network configuration.
View 1 Replies
View Related
Jan 22, 2012
i just bought the E4200v2 and configured for my network. the router found the latest firmware and has been updated. i tried multiple configurations/channels etc with no change.basically, coverage is horrible, and even when in the same room as this router copying files from a linux server and a window7 machine is extremly slow.... almost as if its G speed. my mac is showing the transmit rate >108mbps and should be copying at 60,70 even 80 mbps (megabits), but im getting on average ~28mbps however, uploading from my mac to those 2 machines flys. im seeing speeds at 80 to 90 mbps, which is again, what i would expect.
View 3 Replies
View Related
Oct 31, 2012
Im installing & configuring a new ACS 1121. Ive updated to version 5.3 with patch:This temporarily solves my Active Directory problem but i still would like to have the NTP server pointing to the same reference as the Active Directory.
View 1 Replies
View Related
Apr 10, 2012
I wanna subnet my Network to increased performanced but im alil confused hereWhen looking at my ROUTER STATUS this is what i have.
INTERNET PORT
IP Address XX.XX.XXX.XX
gateway ip XX.XX.X.X
XX.XXX.XXX.XX
LAN PORT
ip address xxx.xxx.x.x
Which one of this ip addresses do i have to subbnet?,my router is a ,NETGEAR N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700 Wireless router - 4-port switch (integrated) - EN, Fast EN, Gigabit EN, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n.
View 19 Replies
View Related
Nov 23, 2012
My laptop is inspiron 5520 new one just one month old ?I have similar problem like that ( my wireless is working but in very closed distance to the connection point, if I change the site to about 5 or 6 metter from the connection site, the Internet become interrupted,
View 4 Replies
View Related
Jan 2, 2013
Plugging directly into the university's network I get a solid consistent ping to any website. This might be 10ms to google, or 5ms to something really close - but the point is its bang on exactly the same every time.However when I pugin the EA6500 and use the internet via the router the pings go crazy.
30
25
21
27
18
29
15
20
20
14
21
etc, no longer consistent and between 2-3x higher. I've turn off all firewalls and filtering that I can see on this router, but it seems absolutely crazy I've paid close to £200 for something that just destroys my ping?
View 9 Replies
View Related
Jan 25, 2012
I have just noticed that my Cisco ASA 5510 cpu utilization increasing upto 30-35 % and when i issue sh processes cpu-usage, i have found dispatch unit occupied most of utilization.
View 4 Replies
View Related
Dec 5, 2011
I'm using a Cisco 1812 to route traffic from a small location with 10 users.. Users are complaning about packet loss, and programs with live database connection is freezing..On the router i've checked one of the Fastethernet interfaces, and I can see that the input errors are increasing constantly. [code]
View 5 Replies
View Related
Aug 12, 2012
I found increasing number of overrun in the tengigabit interface. The hardware is 6509 with sup720-3B and the overrun output is shown in WS-X6716-10GE module. The connected device to WS-X6716-10GE is EMC Islion S200. I think the capability of WS-X6716-10GE can handle EMC NAS device and the load is not so busy. So I have no idea of handling this and the reason why this overrun packet is shown.
[Code]...
View 3 Replies
View Related
Oct 15, 2011
I live in an apartment building that offers free wi-fi. The connection on my laptop is bad and extremely inconsistent. I was wondering how I could improve this. I was wondering if a usb wireless network adapter would improve my connection.
View 2 Replies
View Related
May 12, 2013
I just upgraded my router from the WRT54GL to the EA6300, and it appears there is less coverage with the new unit. Previously, my neighbor could share my router and now with the EA6300 my phone switches to 4G at the end of the driveway. Has anyone seen any specs which publish to output of the ea6300?
View 3 Replies
View Related
Aug 14, 2012
I am having a very strange issue with connecting new machines to reach the internet.We have a ASA 5505 which the previous tech configured the DHCP pool to 192.168.1.60 - 192.168.1.110
We ended up reaching our limit which I changed it to: 192.168.1.60 - 192.168.187
Then next day when I arrived to work, our DC was hung from windows updates. Once we got everything back up, every computer currently on the network can reach the internet/VPN tunnels etc. So (continuing with my day) I created a new server in a VM (Hyper-V)I can ping everything internally (even the router) 192.168.1.1, but I cannot resolve DNS. I have configured a static IP, tried Dynamic IP.I have looked for any ACL indicating to block outside the range of the old DHCP pool but no luck.On my local maching I can ping the DNS addresses, but just not on the new server.
View 1 Replies
View Related
Feb 22, 2012
I have encountered some weird issue on our Cat3750 running as DHCP Server.I have excluded 5 IP addresses only on the running configuration. [code]
View 1 Replies
View Related
Jan 24, 2013
I have a strange effect at my ACE 4710. I loadbalances normally reliable only 14 WEB-Services.
It's running on SW A3.25. Since several weeks I regognized a dramatical increase of Sticky entries. So when running in limitations (the stolen for reuse counter increased then) (show np 1 me-stats "-slb -v") gave more and more resources for sticky ... last it was at 65% and ran again into limits at round 650500 Sticky entries.
So I began to find out what of the services was affected with most sticky database entries and could Identify it. There were really to see round about640000 entries for that specific service.
The sticky for that service was defined to look at a specific cookie in the http header and the timeout defined is 120 minutes.
So round about 45000 Entries was to see with a "show sticky databse group Cookie_Sticky" with a time-to-expire value of zero in the database like the follwing examüple shows:
timeout : 120 timeout-activeconns : FALSE sticky-entry rserver-instance time-to-expire flags ---------------------+--------------------------------+--------------+-------+ 13765297814690832647
[Code]....
When I modified my Sticky definition with the command "timeout activeconns" all the Zero-Entries were kicked out and the rsources used for Stickywent back to 5% of usage...
View 1 Replies
View Related