Linksys Cable / DSL :: WAG54GP2 VOICE Tab Access Lost
Jan 9, 2012
I bought a WRT54GP2 independently of my ISP/VOIP provider so I could have an all-in-one router. As my provider would not provision the VOIP side I disabled provisioning and set up the voice settings myself and it works perfectly.I was reviewing the VOICE settings side and under the SYSTEM tab there were settings for Administrator Password and User Password. Researching on the Net it seems these should be set to strong passwords which I did but then found trouble moving from the main part of the router configuration to the VOICE tab as I would get a message about a non-admin account not being able to administer the voice side. Via clearing the cache on my browser and restarting the router/browser I managed to get back into the VOICE config tab and immediately removed those two passwords. Seeing the settings under the SYSTEM tab it looked to me that the router was open on the WAN side on port 1880 so I disabled the web server and web server admin options thinking these were only related to the WAN side not the LAN side.
I now find out that I can no longer access the VOICE tab as the router immediately disconnects from the browser.I've tried contacting my ISP/VOIP provider but they seem to be unable to assist and have had no luck with Linksys support either as all they want to do is pass it back to my ISP/VOIP provider saying they are the one to reconfigure it but I'm the person who did the config (and also shot myself in the foot incidentally). If I could only reset the voice side of the router back to factory defaults I would be fine but, unlike the WAG310G, there is no option to do this, just the option to reset the WAN/LAN/Wireless side to factory defaults. I've tried pressing the reset button for 30s and reset via the menu option but neither reset the voice side. Surely there must be some way to do this even if it involves opening the box up and connecting a jumper or something.
View 9 Replies
ADVERTISEMENT
Jul 4, 2012
I'm thinking about buying a WAG54GP2 router. However, my ISP provides a modem which has uses RJ-45 lan cable. Is it possible to configure WAG54GP2 to use one of the lan ports as WAN? Is it possbile to change the mac address of that port?
View 1 Replies
View Related
Dec 29, 2011
do WAG54GP2 routers have wds support? if they support, how can i configure?
View 1 Replies
View Related
Dec 22, 2011
i am signed up for an IPTV service. my service provider set up their own hardware including a reciever and a wireless modem. but their wireless modem has weak signal and i cannot connect to it using my computer in the other room. so i wanted to set up my WAG54GP2 modem to use with IPTV service. but i couldn't. i have followed the instructions described there:
[URL] (support page for some other IPTV provider, i guess)
so, i have checked the configuration details of the other modem which is provided by the IPTV company and found out that encapsulation mode is selected as "DHCP" instead of "Bridge mode only". But my linksys modem does not have an option named "DHCP". so, does it mean that it is impossible to use IPTV with my WAG54GP2 modem?
View 2 Replies
View Related
Mar 26, 2011
I have been using a WAG320N since January. Around a week ago I came home to find the unit attempting to reconnect every few minutes - the DSL light flashing but nothing happening.
I replaced with an old Belkin unit which worked fine straight away.
i have upgraded the firmware, which made no difference, and secondly, tried a brand new unit, which strangly had the same problem even though the ancient belkin unit works first time and my original cisco unit worked for a couple of months before failing.
Are there any settings that relate to the DSL connection that may have been reset on the original unit? Could this be an issue related to signal quality or anything similar?
View 5 Replies
View Related
Jul 10, 2012
I lost the disc to my X2000 gateway. Is there a download site for the software?
View 1 Replies
View Related
Mar 5, 2012
after few years without problem with wifi connection at my home, four month ago began wifi lost connection.
4 iphone with assigned ip address;
3 Portable PC (2 with dhcp and N band, 1 with assigned ip with G band)
Router is not too far from wifi equipment
the wifi is protected with WPA-PSK
Often during day, on pc and iphone we have lost connection, we can see in settting the SSID of my wifi lan, but if we try to connect recive message:Unable to connect to casa(casa is my ssid), on router the wifi led is green fix (not blinking) and only after a few minutes or many try wifi return aviable (for all equipments at the same time and the wifi led blinking)If I want quick connection, without attempt, i simply power off router and after power on, the wifi connection begin aviable!
1. changed SSID, very different from other SSID of my neighbors;
2. changed class of ip address (from 192.168.x.x. to 10.16.x.x);
3. wifi with no protection;
4. tried with & without mac address filter;
5. tried with only 1 wifi connection.
View 3 Replies
View Related
Feb 24, 2013
I have lost the original console cable to the Cisco Linksys SRW2048 and was wondering if I can use the Cisco console cable or can a regular serial cable with female ends will work?
View 2 Replies
View Related
May 21, 2007
A few days ago I had to reinstall my notebook and therefore I lost my network settings. I want to reconfigure my Linksys Wap55AG to let it use a new WEP key but I cant find the software to do so ANYWERE on the net.
View 5 Replies
View Related
Nov 13, 2007
I have a BEFSR41 V2 working as dial in ADSL connection.While I changed my settings of the UPnP in the router I lost access to the admin page. Well most strange is that everything is working.I kept my internet access as well as the computer and printer access.The only thing I lost is access to the router admin page.The password it was not defaulted to admin, neither kept the password that I had set up.
View 9 Replies
View Related
Jun 22, 2007
I bought the wap54g access point.unfortunately i have lost the installation cd.is there a way to download the drivers of this device?
View 4 Replies
View Related
Apr 19, 2012
how do I access voice mail
View 1 Replies
View Related
Sep 23, 2012
I have a customer who is going to host a VOICE services like providing SIP services to its customers. What specific ports required to be opened up for this on ASA 5515X. I would rate it ASAP.
View 3 Replies
View Related
Jan 9, 2012
Cable modem connected directly to a Dell Vostro laptop works fine. Same cable reconnected to Dell Dimension 4700 is not working. This has all been working fine for years - usually I have a wireless network with the 4700 connected to the router by Ethernet cable, and the Vostro connected by wireless, but I have removed the router to close in on the problem.First, I am not sure if my ip settings are correct. This is the output from 'ipconfig /all' [CODE].
View 5 Replies
View Related
Mar 19, 2013
The SRP547W supports creating both Wifi Voice and Data vlans.Can I configure a Wifi IP Phone to connect to the SRP547W Voice Wifi Vlan and have the SRP associate it with Line 1 (in lieu of a standard phone connected to the Line 1 FXO port - without additional hardware)?
View 1 Replies
View Related
Nov 1, 2012
How do I connect and configure my WAP54G wireless access point to my new Cable Modem? I have it connected to the modem but I cannot access it to configure it. It appears to be working but before I got the cable modem I had it connected to a router and it was set-up with a static IP address. With my new ISP, I no longer have a static IP address so I am trying to configure the WAP54G to use DHCP. Trying to access it thru the internet at 192.168.1.245 does not work.
View 1 Replies
View Related
Nov 11, 2012
Over the passed couple of weeks I have experienced issues trying to connect to the internet via the LAN Ports. My main PC and a Xbox cannot connect to the internet even though 3 laptops have no problems using the Wifi connectivity.I have had two live chats with Cisco engineers and the first resolution was to perform a firmware upgrade which did solve the issue for a day or two. I think it was more to do with reset the modem/router rather than the firmware upgrade. The second session ended with the eingineer advising me to take the equipment back to PC and seek a replacement simply because Ciso have nothing in writing relating to this problem.
View 6 Replies
View Related
Aug 30, 2012
I hard reset the router WAG160N and i can't access it on 192.168.1.1, i can connect to the wireless connection but it shows unindentified network, in properties gateway IP is absent. i also get 169.254.1.38 as IPv4.What could have happened to the modem, I can't use it at all at the moment?
View 3 Replies
View Related
Oct 3, 2011
1) I dis abled the DHCP services on modem router as i was connecting it to a belkin router and after that i cannot accesss the setup of the WAG 120N.
2)If I acces the WAG120N by Lan the internet works fine but if i acces through wirless it does not.
3)Also when ever i connect the LAN cable from BELKIN router to WAG 120N the wirless services stop as well on the BElkin router and i cant figure it out why.
View 1 Replies
View Related
Sep 13, 2011
I cannot access my server through my WAG 325N Router from any of my office computers but all still have wireless internet access.
View 2 Replies
View Related
Feb 6, 2011
I have WAG320N. I attached External HDD to Router's USB.I don't know how to access to HDD and other users also..(not via internet)
View 1 Replies
View Related
May 20, 2012
I have d-link wireless router which is connected to the internet, also I have Linksys (WAG160Nv2) which i want to use it as access point by link it to D-link router using ethernet cable in order to use the wireless internet. D-link router settings shown below
I changed the settings of linksys router as shown below
View 8 Replies
View Related
Sep 18, 2011
I run a X2000 router for some weeks and it works properly basically - with one exception.WIFI attached devices (Win7, Vista, Android) can go to the internet without having any problem. But they cannot access my local servers (Media-Server, Storage server). I access with normal settings (not the guest) but the behavior is similar to what I expected from the guest-WIFI: protect resources in LAN.Anyway, for historical reason I have also another WIFI Hotspot in the LAN what is connected to the X2000 via cable. If the same devices connect to this hotspot, everything works fine. So the problem isn't caused by the servers.
View 9 Replies
View Related
Feb 7, 2011
I set the access restrictions as instructed but they refuse to work. Firmware version is :-1.01.05,have rebooted, with no success.
View 6 Replies
View Related
Apr 21, 2012
I am using the x3000 as a modem and router, and I managed to set up the device yesterday through the web interface (192.168.1.1).However, after less than 24 hours of continuous usage, I cannot access the interface for some odd reason. I tried using the disk that came with the device but the software reports as if I am not connected to the router. I tried pinging 192.168.1.1 and I get >1 ms so that confirms the device is active and responsive.
View 1 Replies
View Related
Jan 20, 2012
Accidentally I disabled the modem web access therfore I am not able to open admin console from http://192.168.1.1. How to enable it again?
View 1 Replies
View Related
May 20, 2012
I recently moved to a cable ISP and unfortunately had to also change routers in order to take advantage of the VoIP feature (analog phone) they provided me with.Now, the new router, the WRP400, is very limited feature-wise compared to the custom flashed WRT54GL I used to use with my DSL provider.Now the WRT54GL does not have any FXS ports, so I obviously can't just plug my cable modem to the WRT54GL. Therefore, I was hoping to achieve a setup similar to this one:Cable modem => VoIP Router w/ voice only (WRP400) => "Main" router (WRT54GL w/ Tomato)Is there a way to bridge the WRP400 successfully with the WRT54GL keeping only the voice feature enabled on the VoIP router while the WRT54GL takes care of the rest? (Wireless, WAN, port forwarding, etc)
View 2 Replies
View Related
Jan 26, 2012
I disabled Remote Access under the Administration tab but I still can access my router management from the internet by typing in my routers gateway address. In fact I did the opposite of all that is described here. I already did a soft- and hardware reset. How can I block Remote Access forever?
View 4 Replies
View Related
Dec 14, 2010
I have to change ISP, as mine is closing down , and the new ISP will be sending a N router - which may have 5Gh - so I'm thinking of replacng a "G" AP with the WAG320N and use the 5Ghz range. The WAG320N will be used with a USB Music harddrive and a TV and PVR connected to it - so my music will be direct to the DLNA devices - and also provide any devices with a 5Ghz signal
View 9 Replies
View Related
Nov 8, 2011
I recently purchased a WAG320N router and have issues with access restrictions. Internet is shut down regardless of the time set with the policy or policies. I am using firmware version V1.00.12. Tried rebooting router, restoring factory defaults & restarting IMAC to no avail. Timezone checked and OK.
View 5 Replies
View Related
Jun 30, 2011
I have two routers and was wondering if it is possible to use one as a router and one as an Access point, do you know if this is possible and how do i go about configuring this?
Currently my wagN160N v2 is the one that my dsl is connected to, but how do i go about sharing this to my other router and making the WAG160n v1 the access point?
View 1 Replies
View Related
May 27, 2011
I access my home computers via teamviewer or logmein. My router is a Wag320n
Sometimes my internet connection is lost and if I'm home, I just reset it and the internet is on again.
But when I am away and the internet connection is lost, I can not access my computer. If only I could reset it, I would be able to access the computers I am trying to find a solution to do this.
Practically when the internet connection is lost, the modem does not get an IP from the ISP right? And when this IP is not assigned, there is no way of connecting to the router itself right? Is there a way of pinging or resetting or accessing a modem that is connected to he phone line? I think it is impossible. Or maybe it is possible via some MAC address search or sniffer or I don't know.
Another option would be to somehow have the modem reset, let's say every hour automatically so that the max time I would not be able to accss my computers remotely would be 1 hour.
View 3 Replies
View Related
Feb 2, 2012
i have 2 linksys modems wag120n and wag320n.i am using wag320n as my primary modem and i want to set up wag120n as an access point to provide internet access in another room. what should be the configuration of wag120n?and yes i have read all the post about this subject and tried it all but since there was no actual solution for this problem i decided to open a new post.
View 1 Replies
View Related
