Linksys Cable / DSL :: IPTV Service Using WAG54GP2?
Dec 22, 2011
i am signed up for an IPTV service. my service provider set up their own hardware including a reciever and a wireless modem. but their wireless modem has weak signal and i cannot connect to it using my computer in the other room. so i wanted to set up my WAG54GP2 modem to use with IPTV service. but i couldn't. i have followed the instructions described there:
[URL] (support page for some other IPTV provider, i guess)
so, i have checked the configuration details of the other modem which is provided by the IPTV company and found out that encapsulation mode is selected as "DHCP" instead of "Bridge mode only". But my linksys modem does not have an option named "DHCP". so, does it mean that it is impossible to use IPTV with my WAG54GP2 modem?
View 2 Replies
ADVERTISEMENT
Jul 4, 2012
I'm thinking about buying a WAG54GP2 router. However, my ISP provides a modem which has uses RJ-45 lan cable. Is it possible to configure WAG54GP2 to use one of the lan ports as WAN? Is it possbile to change the mac address of that port?
View 1 Replies
View Related
Dec 29, 2011
do WAG54GP2 routers have wds support? if they support, how can i configure?
View 1 Replies
View Related
Jan 9, 2012
I bought a WRT54GP2 independently of my ISP/VOIP provider so I could have an all-in-one router. As my provider would not provision the VOIP side I disabled provisioning and set up the voice settings myself and it works perfectly.I was reviewing the VOICE settings side and under the SYSTEM tab there were settings for Administrator Password and User Password. Researching on the Net it seems these should be set to strong passwords which I did but then found trouble moving from the main part of the router configuration to the VOICE tab as I would get a message about a non-admin account not being able to administer the voice side. Via clearing the cache on my browser and restarting the router/browser I managed to get back into the VOICE config tab and immediately removed those two passwords. Seeing the settings under the SYSTEM tab it looked to me that the router was open on the WAN side on port 1880 so I disabled the web server and web server admin options thinking these were only related to the WAN side not the LAN side.
I now find out that I can no longer access the VOICE tab as the router immediately disconnects from the browser.I've tried contacting my ISP/VOIP provider but they seem to be unable to assist and have had no luck with Linksys support either as all they want to do is pass it back to my ISP/VOIP provider saying they are the one to reconfigure it but I'm the person who did the config (and also shot myself in the foot incidentally). If I could only reset the voice side of the router back to factory defaults I would be fine but, unlike the WAG310G, there is no option to do this, just the option to reset the WAN/LAN/Wireless side to factory defaults. I've tried pressing the reset button for 30s and reset via the menu option but neither reset the voice side. Surely there must be some way to do this even if it involves opening the box up and connecting a jumper or something.
View 9 Replies
View Related
Dec 12, 2011
Is it possible to set up additional PVC for IPTV on LinkSys x3000?
View 4 Replies
View Related
Feb 24, 2013
Is it possible to establish a connection to an IPTV service with the N150 wireless router?
View 1 Replies
View Related
Nov 10, 2011
when I made the purchase for Linksys X3000. However, when I reached home and tried to use it. It auto reboot every 1 or 2 mins of usage. It's not just wireless affected but the whole thing rebooted. Reflash the fimware doesn't makes much different. Did a Standard 30-30-30 reset didn't solve any problem. Logged the case and informed linksys customer service that I'll go down to the retail shop for replacement. Case ID Given.On the 8th Nov, I went back to the retailer shop and proceed to get a replacement. The shop was fine, they allowed for one on one replacement. However problem persist. This time it got worse, when I tried to flash the firmware, it got stuck at 98% for half an hour. So I got it rebooted. Next, It can't boot up and the power status shown Red color.
I contacted the same customer service and inform them about the same issue with the replacement. Next I was given the address of the RMA Office at Funan L5-K3. Problem is, the address and location is wrong, the office became a Kawaii Koochi cosplay dessert shop.On the 10th Nov 2011, Checked the address in the net and some stated it's in Bishan and some stated it's in Funan. I called the Number given by the customer service and the line is dead. Called again, this time its Indian CSO and was told by the customer service that they're not operating after 7pm. But the problem is, it's only 5.30pm. Apparently they thought I was in US or Canada. So they transferred me to another customer service but nobody picked up the call. The fella just told me that hey, they not picking up so there's nothing he could do and that's it.I called a number started with 800-1204280, they told me that the office location is in Funan lvl 6 just beside the huge challenger store. I went down again at about 6.30pm and managed to locate the Service Center, I think it's third party as it cater for other product such as lenovo and other brand.This time the RMA center customer service told me that they doesn't carry any stock for replacement. I wasted so many trip just for one router. It's a very dissappointing service overall and this product is highly unreliable.
View 3 Replies
View Related
Mar 17, 2013
Not far ago I purchased Cisco e1200. All my attempts to set up the iptv thru wifi failed. Nevertherless iptv works fine when I insert LAN cable directly into my laptop. On WRT320N does not work. Firmware is Ver.1.0.03.
View 9 Replies
View Related
Oct 25, 2011
Today has bought a router. Before it at me was D-link Dir 320. IPTV on DIR 320 worked perfectly. On WRT320N does not work. Firmware has updated to Ver.1.0.04 build 1. Prompt that it is necessary to make?
View 5 Replies
View Related
Aug 20, 2011
I've got an IPTV network with Bell FibeTV with Motorola VIP1216 (the DVR master) and VIP1200 (slave) cable boxes. All the coax cables in my walls form a wired ethernet network instead of a cable TV network. To get better wireless coverage in my home, I've set up routers as wireless access points at each of the cable boxes. Essentially I've plugged the router into the ethernet bridge of the cable boxes, and disabled DHCP and gave it a static IP and did all things I needed to do to disable all the routing capabilities and make it into a switch (here's what I did, step by step: [url...]). So when I go from one room to another, I just select a new wireless access point to get maximum signal strength and speed.
View 6 Replies
View Related
Nov 28, 2012
I have e1200 v1 with last firmware 1.0.03. Device using as AP/switch (no WAN port installed). When I open the TV chanal (239.0.1.3) the pictures 1 sec good and then stoped, device not responding. When TV off, 3 sec later internet works and device up.
View 4 Replies
View Related
Feb 23, 2011
I've bought a E3000 as replacement for my Linksys WRT350N router.Just upgraded the firmware to version Ver.1.0. 04 (build 6).I use aonTV - an austria IPTV service (Multicast via UDP) - an this worked with my old WRT350N (hw version 1) consistantly well. I hardly had to reboot the router to get the multicast stream.With E3000 I checked the option that it should not filter any multicast traffic - when I reboot the router it works for some time - but after some hours it does not work anymore? I want to watch TV via my HTPC connected via GigaBit Power to the E3000.
View 3 Replies
View Related
Mar 18, 2012
I have bought Linksys E 4200. I'm connected up by protocol PPPoE by my provider, but IPTV doesn't work on my computer.I use the program IP-TV Player and/or VLC Player and both don't work. I only see the list of channel, but any channel doesn't load. Before I used the router DLink Dir 300, and everything was Ok.
View 3 Replies
View Related
Dec 19, 2011
I have Linksys e3200.Can I to setup/use e3200 to watch IPTV?
View 9 Replies
View Related
Jan 7, 2012
I would like to know if the Linksys X2000 ADSL2+ modem router will work with my IPTV service.
View 3 Replies
View Related
May 14, 2012
I switched from DSL to cable about a week ago, I have two desktops connected via ethernet cable to the modem. One works fine, the second stays connected for 5 seconds, disconnected for 5 seconds, connected, again, etc until the system is on for 45 minutes or so and then it stays connected. I feel like it is probably a setting and that the system is trying to detect something during that time. Problem is I have no idea where to start and Comcast is totally useless. I have already replaced the cable because that's what they said the issue was, it wasn't.
View 2 Replies
View Related
Mar 7, 2012
My roommate and I are trying to set up the internet, but my computer won't detect the Ethernet Cable. Whenever I go to Network and Sharing Center and try connecting to the internet, the computer simply says "Windows did not detect any networking hardware", even though the light is clearly on and should be working. The cable is also new so it should be fine. I've also been looking around on the internet a bit, and in trying to fix the problem it looks like some of my Services are turned off, which seems to be causing the problem. However, whenever I try and turn them on, I get an error message saying "The dependency service or group failed to start".
View 5 Replies
View Related
May 16, 2011
When I create a service object or group and add the object to a new rule it never works.I mean the traffic match not the rule. I see not hits.I placed the rule on top of my access list to check if I do somethink wrong but it is not working. When I place only a service for example tcp/23 it is working.
my ip service object
object-group service g-as400 description access client 2 as400 machine service-object tcp-udp destination eq 397 service-object tcp destination eq 137 service-object tcp destination eq 2001 service-object tcp destination eq 3000 service-object tcp destination eq 445 service-object tcp destination range 446 447 service-object tcp destination eq 449 service-object tcp destination eq 5010 service-object tcp destination eq 5544 service-object tcp destination eq 5555 service-object tcp destination range 8470 8476 service-object tcp destination eq 8480 service-object tcp destination eq
[code]...
View 8 Replies
View Related
Feb 28, 2012
We have a situation where services are stopped on the real servers. The probes fail and we confirm the services are not running on the server. We cannot access the ports from the ACE directly. We can still however acces the VIP on the TCP port (L4 VIP class-map). So we can still telnet to the VIP on the port from thr Client side of the network.This is on ACE 20 Modules deployed in Routed mode. The version of software is A2(3.3).
Tried removing multi-match and loadbalance policies as well as class-map and re-applying then re-appyling the service policy to interface. Same behavior,This is a problem at another level as some services are being monitored by GSS via TCP keep-Alive and this obviuosly causes a problem as the service then never goes off-line.
View 10 Replies
View Related
Apr 26, 2011
My topology is a physical ring, and I need transfer IPTV signal to all site along the ring.For example:
A (headend)--- B --- C --- D
|______________________|
Note: -----: have spoke-mesh defination
_____: no spoke-mesh defination to prevent loop
So, with MPLS/VPLS I can implement it. With spoke and mesh defination, the traffic can transfer form A to B, C or D as drop-continute action in ring topology (between different VC). Everything is good, FRR can work very fast. But when the topology have a failure link, for example the link between B and C, at that time the traffic will go from A to B then B come back to A and A --- D ---C. This action is so stupid, because it can increase delay, jiiter in network. On the other hand, when the node failure ( B failure), C will loss the IPTV signal, even the link from A--D--C always good.
View 6 Replies
View Related
Jan 31, 2011
After upgrading firmware from ver 4.00 to 4.11 I can't watch IPTV anymore with VLC. With version 4.00 IPTV works over router (wireless or cable) fine but because of some disconecting trouble I upgraded to ver 4.11. Setup is the same as it was in ver 4.00 including Multicast parameter.
View 5 Replies
View Related
Jun 6, 2012
I purchased IPTV set-top box from Dish Network (which in turn uses NeuLion services). The set top box works out of the box with TrendNet TEW-432BRP, however the set top box seems to reboot every time I try to launch a channel.The set top box is connected to LAN port 2/DLink is configured to reserve IP address for the set-top box based on its MAC address. The set top is also within its own DMZ so that it does not interfere with firewall settings.
View 1 Replies
View Related
Mar 25, 2013
I have a fresh installation of LMS 4.0 on windows server 2003, when i click to open topology i get error message : ANIServer service may be down or Host name isn't DNS resolvable
i tried pdshow -brief ANIServer ===> service UP
DNS is working using host file in driversetc i restarted the server
restared the crmdmgtd
unistall / install java plugin
pdterm ANIServer
pdexec ANIServer
NO change ..
View 6 Replies
View Related
May 15, 2010
Upgrading the firmware from 1.11EU to 1.21EU and 1.31EU has introduced a problem with multicast (IPTV) streams. I have enabled multicast streams and it seems the router no longer forwards a specific address range, in my case 239.139.128.* on port 1234.
I have checked: Streaming from 233.81.233.* works in 1.11EU, 1.21EU and 1.31EUStreaming from 24.1.3.* works in 1.11EU, 1.21EU and 1.31EUStreaming from 239.139.128.* works only in 1.11EUUsing IGMP proxy on Linux I have checked the stream at 239.139.128.* are available as to be sure the DIR-655 is not forwarding them. I see a lot of forum messages stating IPTV streaming is broken since firmware 1.11. It is however working for me in 1.31EU but only for certain address ranges. Can anything be configured to allow 239.139.128.* to work? Because my TV provider uses the 239.139.128.* range for half the IPTV channels I need to get this working.
Related to this, is there page listing known bugs for the DIR-655 and roadmap for future firmware releases?
View 2 Replies
View Related
Sep 22, 2012
I need to set QOS in our new network. We have connected 2 cities together with 700Mbit leased line. On each side we have Catalyst 2960S switches and between them is TRUNK for VLAN 10 and Vlan 20.Vlan 10 is for IPTV (fixed 400 Mb/s for CATV)Vlan 20 is for Internet (rest).Sometimes is happening that Vlan 20 takes more than 400 Mb/s for a few seconds and in this situation we have problems with CATV.Is there any way to make a guaranteed bandwidth 410 Mb/s for CAT - VLAN 10 on this swithces?
View 2 Replies
View Related
Nov 26, 2011
we have Catalysts 2960S for switching in our Wireless high capacity backbone network. As agregation switch we are using 3560x.
I just need to know, if are these 2960S good solution for igmp snooping for whole IPTV stream. It put only a range from backbone and put out on another port. But just specified multicast addresses.
Imput will be 239.128.0.10 to 239.128.0.20 on Gi 0/1,Output wil be 239.128.0.10 - 15 on Gi 0/24
IPTV will be separated on different VLAN for eg VLAN 20,Is needed any priorization configured od switches?,The capacity for IPTV is around 500 mbps
View 4 Replies
View Related
Jan 30, 2013
i have a campus network with 2 core Cat6500 and multiple 4500 series distribution switches plus 2960 series access switches,we have deployed IPTV system in the network but currently 50 TVs are working through sattelite stream from streaming server Cisco's DCM 9900.we are planning to add more 300 TVs in the network and i am wondering that when all of them will be deployed then what will happen for switches cpu utilizations when all the Tvs will be running on the same time with different different channels.
View 1 Replies
View Related
Jul 8, 2012
recommend a cisco core switch and access switches in IPTV network infrastructure?I was ask to implement a network for IPTV system but i don't have idea what will be the model i will use.
Core Switch = Cisco 4503
Access Switches = Cisco 3560X
View 3 Replies
View Related
Dec 13, 2012
I have a modem Scientific Atlanta 2100. I just installed windows 8 pro 64bit and when installing the driver to use the usb cable modem does not recognize it and simply not installed. I wonder if it is possible to use my usb cable modem or simply incompatible with my windows 8 64bit pro.
View 3 Replies
View Related
Apr 23, 2013
With this modem, can you hook up to the Linksys Smart Apps WiFi?
View 2 Replies
View Related
Mar 14, 2013
Our family has about three computers that use a wireless network that we all share. We have an old Gateway, a WCG200, that is bridged to an E2000, which was set-up ever since we required better security when someone used our connection to illegally obtain movies. We got a letter which warned us of any future violations that could cause legal action, so we looked into our wireless connection to better secure it from any other individuals outside of our household. The WCG200 is connected to the outlet in the wall via cable, and then connects from the Ethernet to the E2000. The E2000 has a stronger security setup than the WCG200, which is the advice we received from our ISP and would allow us to keep the Gateway. It provides a strong signal, but from time to time, we suffer latency or slow loading through all of our online devices, even though our connection speed displays a solid 72.0 Mbps. I've tried the Event Viewer to see any problems, and I have noticed some small things:
- WLAN AutoConfig service has successfully stopped.Wirel?
- WLAN Extensibility Module has stopped. Module Path: C:WindowsSystem32cmihvsrv64.dll
- The server {E10F6C3A-F1AE-4ADC-AA9D-2FE65525666E} did not register with DCOM within the required timeout.
- Broadcom NetLink (TM) Gigabit Ethernet: The network link is down. Check to make sure the network cable is properly connected. [This last one is strange, since I use the Wireless Network Connection with a DW1501 Wireless-N WLAN Half-Mini Card, while the Broadcom adapter is under the Local Area Connection and displayed as not connected.]
Other than that, I'm not quite sure what the recurring problem comes from. Our WCG200 has a firewall enabled and our E2000 has an SPI firewall enabled. The security mode of the E2000 is a WPA2 setup. We have disabled the wireless network of our WCG200 in order to make use of the E2000.
View 9 Replies
View Related
Feb 24, 2012
I have a WAG160N wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.
What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ?
View 1 Replies
View Related
Mar 24, 2011
I inherited a BEFCMU10 v.3 cable modem from my boss who switched to FiOS and I would like to use this with my Comcast connection.All I received from him is the cable modem and power adapter, what do I need to install and get this cable modem working? My router is WRT-54G.
View 2 Replies
View Related
