Linksys Wireless Router :: E4500 USB Drive Full?
Dec 11, 2012
I just got a new E4500 and plugged a blank 2TB drive into it (Windows shows it is formatted NTFS) which was originally plugged into my WRT-610. I'm moving my media files and when it hits a 50+GB video it reports that there is not enough space to move the file. Smaller files are moving just fine.
View 4 Replies
ADVERTISEMENT
Jul 4, 2012
Since the upgrade by Cisco I can only see Win7 PC's on the network. I can not see the USB drive attached to the E4500, nor can I see my Media server which is Linux based nor any Win XP computuers.
View 9 Replies
View Related
Oct 31, 2012
E4500 local network IP is 10.10.XXX.XXX and the DHCP server also starts with this subnet. My network is 192.168.XXX.XXX based but if I manually chahge the routers IP I can no longer access it. I do not use DHCP as this is in bridge mode. Why is this setup this way...CCC?
View 1 Replies
View Related
Nov 1, 2012
I see I have 2.1.39.144146 but I don't see that version on the download page?
View 3 Replies
View Related
Oct 2, 2012
i sold off my e4200 & brought a e4500 .The e4200 has had a 2 TB W.D external drive attached ,i stream movies to a sat pvr in the .ts format .The problem is i set the e4500 up & it deleted my .ts files not once but 3 times.when i brought the e4500 i did roll the firmware back to the classic non cloud firmware.the third time i had turned the router off & once swtiched back on my files were gone .should i safely remove the drive from the set up ? what if i have a power failure?
View 5 Replies
View Related
Feb 14, 2013
I just bought a Linksys E4500. I would like some support to configure the settings regarding the 5 Ghz Bandwidth.I need to fill out the cells for Server Radius IP and port.Which are the best setting for this section?
View 3 Replies
View Related
Mar 31, 2013
My e4500 seems to be blocking my nhl gamecenter apps from playing live video on Ipad and I phones..nhl support tells me it is setting in router.?
View 6 Replies
View Related
Oct 31, 2012
I have linksys E4500 and I would like to be able to see the website visited vs ip address.Is there a way to enable same or achive same via parental controls.Again I do not want to block a website but monitor which websites are visited. Is this achievable via router or an additional software/hardware required to be used with router
View 5 Replies
View Related
Dec 31, 2012
Not sure if I have a defective router, but if I unplug it I then need to wait at least a half hour to plug it back in. Anytime sooner and it won't broadcast a SSID or connect to the modem. This is a huge inconvenience if you want to change router settings and then you need to restart.
View 1 Replies
View Related
Oct 13, 2012
Latest firmware with CCC corrupted after power outage. I reseet the e4500 several times and tried to reload the firmware and still no good. Only way I got it back up is to install the older non-CCC version 2.37. Strange all was fine until the power outage. Not sure if I should even bother to upgrade to 2.38 again.
View 2 Replies
View Related
Apr 29, 2012
Just purchased the E4500 today and install failed on both machines. Install starts and then fails to finish.I have contacted support via chat and was given manual instructions and the router will not connect to either machine.Are there known issues with the Cisco Connect software not installing?
The chat support person finally dropped out of the chat and the router remains in an unusable state.I currently had to cable wired connection of laptop to get an internet connection.
View 9 Replies
View Related
Oct 15, 2012
due to location issues, I have to use the E4500 as a 2nd router. I have a Netgear router setup as the primary router connected to the internet, this acts as my firewall. The E4500 connected to the netgear and it route all traffic fine. The only issue I have is port forwarding to E4500. I've setup the FTP server on the E4500 and can access it via the internal network. Then on the netgear I forward the FTP port 21to the E4500. But it doesn't seem to work.
I know when I forward all my other ports, it works just fine. If I setup a FTP server on an other machine and forward that the port it works, just not the E4500. I've disabled all firewall settings on the E4500, and still nothing.
View 9 Replies
View Related
Jan 26, 2012
message keeps telling me that there is not of disk space on drive c to download any kind of updates i do not know all that much about what i can do .
View 1 Replies
View Related
Mar 3, 2013
I am running LMS Prime 4.2.2 on a Cisco UCS Red hat The Critical Message Window is showing that the /opt/CSCOpx is 60% full. This is usually only 9 to 10% .I have done 2 log rotation and the files are below warning size. [code]
View 1 Replies
View Related
Oct 31, 2012
I just bought a E1200 routerand using automatic setup by using CISCO connectafter that, I only got a CONNECT SPEED with about 10Mbps in my android smart phone,I would like to know how can I increase the WIFI strength WITHIN THE WIFI SETTING, I chose MIXED mode rather than specific in b/g/n mode.
View 4 Replies
View Related
Oct 16, 2011
I have a 100mb conection and regularly get 90mb plus speed when conected direct to the modem. If I conect via the E4200 I only get 50mb ? I have tried disabling the firewall and QOS but this has had no effect. I am using a wired conection and the latest firmware. Its almost as the E4200 is capped at 50mb throughput.
View 6 Replies
View Related
Oct 26, 2011
I recently bought an AE1000 wireless adaptor, but I have run into a problem.The range on the device is very low, as the only way to get full signal is when the router and device are right next to each other.I have read that this could be due to the device operating on 5.0Ghz frequency, and that this setting is changed through the Cisco Connect software. This software was not in the Setup CD, and the online installer did not install the software either.
View 4 Replies
View Related
Aug 20, 2012
i have a little annoying problem with my E4200. V1 with the latest 04 fw. It seems, that after many hours of downloading at full speed (only one torrent at a time) the speed goes down, and up again, and becoming unstable. My max download speed is 1.5 Mb/s, and it can drop from that, to 50 kb/s, and then up again. and i have no internet access when that happens, but it only last 10-20 seconds and then its back again. Sometimes i get that yellow warning sign on the taskbar which says "No Internet Access" but not always.
Seems like its happening after many hours of downloading at full speed. im on the latest firmware, have tried different channels, 20 Mhz only on Channel Width, different names on the 2.4Ghz and 5Ghz channels.. i use the 2.4Ghz channel btw. Otherwise its stable, and i have had no problems while gaming online.
View 7 Replies
View Related
Sep 1, 2012
I have an EA3500, I have 30 Mbps download when I connect my pc directly to the modem. When I add in the EA3500 router it drops to only 10 Mbps download on both wired and wireless devices.
View 9 Replies
View Related
Dec 8, 2012
I just acquired a used E2100 from an auction, when I plug it in I see an "Unnamed Network" with full bars in wireless, but can't connect since I don't know the ssid/password.When connecting with cable, with ipconfig I get a 10.10.10.108 ip, the gateway is at 10.10.10.99. Yet I also cannot access it.I have tried the reset button at the bottom, holding it for over a minute, pressing it quickly, holding it for 30 seconds, holding it and unplugging + replugging the router, but nothing is working.I have also tried the CD that comes with it with cable and with wifi only, but it does not find the router. I have deleted my default wireless network settings, had my wifi on, was not connected to any networks, yet the CD could not find the router.When router is on, the WIFI led blinks around once a second, while the LAN led blinks randomly like it should.
View 3 Replies
View Related
Jul 13, 2011
my router has all the lights on that it's always had. I use the wi fi for my iPhone,iPod, and laptop. On all of then I'm able to to search and find my connection and connect to it , but it's shows I'm connected with full signal but my internt just worn work . I can't connect to the internt on none of the devices, also if I connect the ethernet from my modem to my router then my routers ethernet to my pc my pc's internt won't work.
View 2 Replies
View Related
Jan 27, 2012
Just got an E2500 and installed it with no problems and it was working correctly for 1-2 days. This evening the signal strength of my SSID dropped to LOW and a new SSID now shows up with full signal strength. It s not an SSID from any of my neighbors and from checking several forums it appears this is known problem.
View 2 Replies
View Related
Dec 21, 2011
I have a d-link dsl modem that reports it's getting the full 6 meg download speed from AT&T. I put the dsl modem in bridge mode so the E4200 will do the logon to AT&T with my credentials. If i do a speed check using CNET internet speed test, from both a desktop (wired 1gb card) and any laptop in the house (all draft n 2.4 or 5.0), it ranges anywhere from 3 meg to 4.3 meg. I have 6 cat-e ethernet cords everywhere. I do have 2 switches but have tried to unplug those to see if any difference
View 1 Replies
View Related
Mar 1, 2013
Im using a Linksys E4500 wireless router behind a Motorola SB6121 modem. My OS is Windows 7 and it is fully up to date. In general my entire network is working well. Now I have purchased a new IP surveillance camera and need to forward a port to be able to have remote viewing of the camera. Mi ISP blocks quite a few inbound ports including 80 so I have been trying a lot of ports all over the map to find something that will allow inbound access.
After several hours, nothing I have tried works, using a couple of different port probes including one called CanYouSeeMe I always get a "timed out" message. I have disabled the firewall in the router and on the local computer and still no luck. This says to me that either Cox is blocking nearly all ports (doubtful) or the modem is blocking access to the router somehow.
The Surfboard modem doesn't have a built in router. Unfortunately I don't have an old working modem to put in the circuit.
I don't guess it matters but the camera is accessible from all other local computers on the LAN using its IP address with a port number appended (right now it's using 8000).
View 7 Replies
View Related
Mar 30, 2012
I've read the various threads on here and tried all the fixes suggested and I still cannot get my PS3 to "see" the USB drive I've attached to my router.I can see it and access the files from a connected computer, but not the PS3.I've tried creating a share with one directory and sharing the entire partition with no luck. I've enabled all the FTP options with no luck. UPNP is enabled. I've tried setting up the guest account with no luck.I've tried restarting, unplugging with no luck either. I also went into the USB drive and reformatted and started all over again.My PS3 can easily see the other computers on the network, but I would like to use the USB port on the router to not have to have a computer running to stream music.Is there another menu location on the PS3 I should be using to locate the USB? Currently I just look under music or video and the other computers are there. Just not the USB.
View 1 Replies
View Related
Sep 8, 2012
i have a 2tb seagate expansion formatted ntfs. i am primarily a linux (ubuntu) user, but when the drive drops off, it cannot be seen in any os and it doesn't show up on the router setup page.
View 6 Replies
View Related
Feb 8, 2013
I picked up an EA4500 about a month ago and so far it works great! I would like to purchase a USB hard drive to plug into it, but noticed the officially supported drive list on the support site seems to be a little out of date. good "current generation" USB hard drive that works with this router?
View 5 Replies
View Related
Feb 3, 2012
Im having trouble with my E3200. The router is working fine in all areas, with the exception that I cannot get my PS3 to detect the shared USB drive that is connected to the router. The drive is detected /mapped on the connected Windows desktop, but files/folder/drive is not appearing on PS3. The PS3 is connecting successfully to the router, as I have a strong internet connection. I believed that the E3200 would be able to share the USB drive with my PS3 for media file streaming... Or have I not done something correctly in the settings?
View 3 Replies
View Related
Mar 12, 2012
I just purchased an E4200, primarily to connect my Free Agent drive to for network access. The router has V. 2.0.36 installed, drive is fully shared, but I am unable to see the drive when I attempt to map it on any of my XP laptops. When I perform discovery, it finds the router, but is unable to see the drive.
View 2 Replies
View Related
Mar 6, 2013
I had a Sony 8gb usb drive plugged in and was working great with my smart tv and computer..... over last weekend i unplugged the drive and had to format it to my xbox moved what i need to and hen i formatted it back to ntfs the router wont recognize the usb drive. during this i also was facing this bad gateway error 502...i downgraded my router and now using the classic but i still get a non recognizable device error.
View 1 Replies
View Related
Apr 15, 2012
What do I have to do to be able to access the USB drive I plugged into my WRT610N from anywhere, on any computer?
Currently, I just plugged it in, went to \WRT610N in windows explorer, and mapped it as a network drive, adding a few files to try out.
So what do I need to do now to access it from any computer that has internet?
View 1 Replies
View Related
Feb 7, 2013
I just got an EA4500 and I really like it. I set it up with my printer, tested a few things and everything is working perfectly fine. The problem I'm having now is that when I plug a flashdrive to the USB I don't know how to access it. For some reason when I go to the settings under USB Storage it says "There is no drive in the USB Port". It tells me to click refresh but that doesn't seem to work.
I'm running firmware version 2.1.39.145204
View 3 Replies
View Related
Apr 2, 2011
Just bought a Seagate GoFlex 3TB external USB drive to connect to the E3000 router I recently purchased and it is dead. The LED light on the front of the drive doesn't come on when plugged into the router. It does when going direct to the PC and I can access the drive but when I go to the router,and try to explore the drive-nothing. Now if I go to the settings on the router it sees the GoFlex but there are no folders showing even after I entered a 'media sharing' one via PC. I've rebooted the router,the PC,the drive,nada. I reformatted to NTFS and nothing. Why the heck does this router refuse to see this drive? I even when connected to the PC made sure the sleep timer was set to 'never' so it wouldn't sleep on me.
View 9 Replies
View Related