Linksys Wireless Router :: WRR54GS2 V1 Not Able To Connect To Second Computer
Feb 11, 2012
I have been using WRR54GS2 V1 router for some time ( mostly wireless). Connections are mostly unprotected, I was able to connect more than two computers ( both running XP Os ) and mobile phone with Wifi ,
One computer with XP OS will be accessing this network most of the time. After confguring when I connet laptop with Win 7 Os to the network, my other laptop ( the one with XP os ) computer gets disconnected from wireless and can only be connected via Lan cable.
I am using LINKSYS WRT54GS2 Router. Mostly I use it for connection via Wireless. I am able to connIect to it via WIRELESS more than one Laptop running Win XP and and tablets.I wanted to connect one more laptop with WINDOWS 7 OS to this network. I was able to connect via wireless this laptop ( win 7) , but the other one with xp gets disconnected.
Just purchased the E900 and set it up yesterday. I was able to connect to my laptop off of my main computer. When I went to setup my wifes computer I get a message from the easy connect that cant connect to the network. Her computer has a Lynskys supper boost wireless adapter on a usb port
I have a Cisco E1200, I am wanting it to connect to the net using Etisalat ISP. The computer will talk to the router and all the settings look correct but it will not connect to the internet.The router did a software upgrade that it deemed successful.
Installed E4200 with an iMac running MacOS X Version 10.6.8. Wireless connection works great. Also connected a wireless laptop without a problem. But can't connect a 2nd computer is wired. That is a PC running Vista. I know the wiring is good, because the E4200 is a replacement router in a network that was working fine.
How can I get my wireless G laptop computer to connect with the Linksys E400 router?It shows the network and tries to connect but can't. I don't want to buy a wireless N adaptor so is it possible to connect without one..if so how?
E1000. Setup Acer laptop with router and it is working fine. However I do not have Cisco Connect on the computer. I would like to use it to connect other devices etc.
I don't want to allow any Guest access to my network, but I do want to connect my iPad to my network. I've successfully added another computer to the network but the router setup seems to want the iPad to connect only as a Guest .Is there a way to treat my iPad as another computer (not as Guest) so that it my network recognizes it in the same way it recognizes the second computer (without entering a password)?
So I have a WRT54G router since a couple of years now. Laptop (Win7 64bit), ipod, ipad, phones can connect to it without a problem, but new computer (Win7 64bit) can't. I can connect the PC via ethernet without a problem though.
I powercycled my devices, I changed broadcasting options off and then back on, changed my security mode, tried the MAC Cloning (after doing the MAC Cloning, I lost internet connectivity even through ethernet), resetted my security settings, changed SSID, I'm broadcasting through channel 11 2.462. I also tried deleting the HomeGroup
Important fact: the network is in the list of available wireless network, but Signal Strength is No Signal and I can't connect to it. My network adapter is ASUS 802.11n Wireless LAN Card, drivers are up to date. I've upgraded to the latest router firmware.
I am having problems connecting to my wireless internet. We were getting a poor signal so we moved our router to our living room where we always are, but now we can't connect. We tried resetting everything, turned on and off several times. Went to the linksys wireless set up page, changed SSID and password. Still can't connect with the computer or our iphones. It shows our SSID is there but won't connect. My internet when plug directly to the computer works fine (I am using it now). My computer can connect to the router Linksys WRT54G, we just can't get it to connect to the wireless.
We originally set up Cisco Connect with our E1000 Lynksys Router on a laptop- that has since died. So- I wanted to set up the software on our desktop and so I put in the set-up disk. I keep getting message "We didn't find your router" even though I now have the computer linked directly by ethernet cable. I do have connectivity to internet which I set up using my "Easy set-up key" and have a strong signal. Can't get past the first router step on the set-up disk to install the program- so now do not have Cisco Connect on any computer.
My WRT54G2 v1 does not automatically connect to the internet on computer start-up. The computer will say "Connected, No Internet Access" In order to fix it I have to unplug the router and then plug it back in. This happens to any computer that tries to get online from a cold start-up. The router must always be unplugged, then plugged back in, then it will have internet access (and will generally maintain it throughout the session and even if the computer is restarted, i.e. warm boot). I have downloaded the latest firmware uprade.
I am unable to connect to the internet with my XP computer. I am running Apple Air Port as my router. The wireless network has an iMac, an IBM Think Pad(XP SP2)and a Dell XPS 410 (XP SP2). I am using WPA security and the Dell will not connect while the other two computers always connect. My wireless network is broadcasting, but when I try to connect after entering the proper key, it attempts to connect but appears to time out and displays the available wireless network. I tried reinstalling the drivers, but no success. Device Manager says the card is working and enabled.
I have one notebook and two desktop PCs and ASUS wireless router in my home. I don't have any problem to connect to internet but when I want to connect to my work via VPN I can connect with only one of them If I want to connect with another computer I have to reset router and then connect. after each reset I can connect to VPN with only the first computer which have connected to the VPN and even if I turn off the first computer and turn router off and on again, still two other computers are unable to connect to VPN until I reset the router then again only the first computer which connects to VPN (no matter which of three PCs) is the only one which can connect to vpn. I tryed to get different user name and passwords to use different user name and passes on different computers, all user name and passwords work but for the first computer which connect to VPN
So a few months ago I bought a wireless router, and I've been using it just fine with my laptop ever since. however, my father-in-law has a laptop and he can't connect to the router. and the other day I bought a brand new desktop PC, and it can't connect tot he router either.both my FIL's laptop and my new desktop detect the wireless router, then when connecting ask for the passphrase. so i put in the passphrase and hit connect, and it says that it couldn't connect (quite the vague error message).
I tried putting in an incorrect password, and an error message comes up saying that the passphrase is wrong, so I know thats not the problem. Next I dissable all security, and both are able to connect to the router just fine, but not with the WEP pass phrase.I don't understand why they can't connect since I have the proper pass phrase. I also have a nintendo DS and Wii, both of which are able to connect to the wireless router with a passphrase, but not without.
so, if I have no security all 3 comps can connect but not the wii or DS. and if I have the WEP security on, only 1 laptop and the Wii/DS can connect. furthermore, my DS requires a WEP security key to connect.so anyways, what would cause the problem with the laptop/desktop recognizing the wireless router, validating the password but not actually connecting? but being able to connect without any security?
My uncle has just received broadband. We have a router which is connected to his phone line, but the computer is upstairs. We have measured it and it needs 20 metres of broadband and ethernet cabling to fit. Once we get these cables, can it just be connected as the cable is going to go up the stairs and is hazardous
aptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties
Sometimes I cannot connect to the router after my computer has been to sleep. This has occurred on different routers. I can still see the network, but am told I cannot connect when attempting to connect to it. Restarting/shut down does not solve the problem - I have to restart the router itself, and then my computer will reconnect automatically. Other computers/devices will be unaffected by this and maintain a connection the entire time. Atheros AR5B91 Wireless Network Adapter using Windows 7 Service Pack 1.
I've looked all over the internet for this and can't find a definate answer. Waited for live chat and got kicked before I got to talk to someone... Just sold my computer and the plan was to buy a newer mac but we've been getting along fine without a computer with just using our iphones. So my question, I see that Cisco has the Connect Express app for the iphone, and I've read about all the features it has like changing settings, router features, etc. But I can't find anything on using the app for the initial set up of the router. I'm currently on an older linksys router (set up before we sold the computer) but it's time for a needed upgrade.
Mistakenly 'removed' a PC from the network. I followed the instructions on the EasyLink Advisor to add a new computer: open the .exe file that contains all the settings onto the new computer. That didn't work. But even if I removed the computer (by mistake) I don't see why when she goes to log in to the wifi account, she can't just type in the password.how to add a new computer to the wifi WRT160Nv3?
I will be setting up a new computer this weekend. I presently have a WRT54G2 wireless-G router and have configured it to an IP address that works with my AT&T(Bellsouth) broadband modem (Westell). When I reconnect it to my new computer, should I first just connect the ethernet cable to the modem as if I don't have a router (like I did for years) and then go into the instructions for setting up the router via the DVD but enter the IP address as I have it working now?
I have new PC with Window 7 and trying to set up E2000 on new computer with original set up CD. States I need go back to my old computer and set up new key and transfer to new computer. I do not have access to old computer. getting set up on new computer?
I have a WRT54G wireless router ... I want to connect a new laptop through it ... but I need either a network key or a password ... cant locate these ..
My E3000 looses connection whenever any other computer connects whether it is a wired or wireless computer, IPAD, Mac, or anything else we have. It goes on and off any time two have connected and when it works it is very slow once another machine connects. Eventually it makes my network completely shut down.
It constantly disconnecting and wouldn't stay connected for a long period of time, so I tried messing with the settings and it no longer connects to the internet. It tells me that the settings for this router is not compatible for the computer settings. I have reset the router to its factory settings, restarted the computer, restarted the router but nothing changed. I have tried plugging my computer to the router via ethernet cord and typing in 192.168.1.1 in the address field of Internet explorer and nothing comes up. I also forgot the password to the router!
I have a Desktop wired to my WRT120N. With this router being a wirless one, we have other devices (2 laptop and 2 iPads) conected to the internet via WiFi.The thing is, whenever I play an online game (specifically, League of Legends) my ping skyrockets whenever they use the internet.Is there a way for my PC to take priority in bandwidth over theirs? Or at least some way for my game to take priority over theirs?
I currently have a Linksys E1000 installed and working well. I also have the Cisco software installed on 1 computer. I am purchasing a second laptop and want to put the cisco software on it also. How do I go about doing this without going through another full setup procedure? Do I just install software from the cd? If so how is this done without affecting the existing setup?
Can the software be downloaded without doing an actual setup?
I am uable to access my files on the USB Storage Device connected to WRT610. Its configured properly. I can see the drive on my network. When I double click it asks for password which I enter and it takes me to the shared folder. But when I click it it says Not Accessible....You donot have the persmission. FTP works fine.I have noticed that on the disk page in the Shared Folder Area when you click on the Summary, the box with Groups With Access is Empty. Whereas on the FTP area in the same summary it clearly mentions the admin group.I have tried every thing including factory reset, hard reset, using new group, new user name etc..The technician from Linsys even spent an hour on my computer and ultimately he gave up and gave me number to contact technical support.
i recently had to wipe hardrive of my laptop and am having trouble getting hooked back up to my linksys E/1000 , who can i contact about getting password and network name
