Mikrotik RB 1200 Setup?
May 24, 2012
I have been looking for a new router that can handle intensive bandwidth for my office which can handle vlans, QoS, bandwidth management, VPN/VPN Passthrough, and perhaps multi-WAN/Load Balance. A friend has recommended the Mikrotik RB 1200 for my application, having looked at the product the feature set seems to be quite extensive and the price point is very attractive. The router is also rack mountable (a big plus!!!), my question is wether the router is relatively easy to configure/manage. I have managed/installed other routers such as the Cisco SMB series but I have no experience with Mikrotik. I am very tech savvy and have a moderate knowledge of network infrastructure. I have heard so may different responses to the simplicity and I would like y'all to weigh in before I purchase the router. (OR WHATEVER RACKMOUNTABLE ROUTERS YOU RECOMMEND FOR SMB)
View 10 Replies
ADVERTISEMENT
Jun 11, 2012
setting up two VLANs for my WAP: one for all local network and internet traffic and one for just (guest) internet traffic. I just purchased both devices but I don't know if I have the option for free Cisco phone support.
View 1 Replies
View Related
Mar 13, 2011
Is it possible to setup a Cisco 1200 AP with 802.1x to drop users into the corprate network if they have a certificate or if not to put them on the guest network?
View 3 Replies
View Related
Mar 5, 2013
Summary of setup Internal Network --------Cisco 881-(PPPOE)------------------------(CHAP)---ISP Mikrotik Router -----------internet
Basically it was working then there was a power outage and now it wont authenticate against the Mikrotik router. Strange thing is CHAP seams happy with the username and password. Then just terminates the connection.I've also tried PAP but not joy. Nothing appears to have changed. I have access to the Mikrotik and it looks the same as before also.
interface Dialer1
description Internet
bandwidth 7500
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
[code]....
View 6 Replies
View Related
Nov 20, 2012
We have a Cisco 1522 ap bridge running on a controller and we want to create a wireless bridge from the Cisco AP to a Mikrotik SXT5HPND wireless router to a cisco 2960s switch
How to bridge a cisco device with a mikrotik device, but there are plenty who do mikrotik to mikrotik bridging..
View 3 Replies
View Related
Jul 24, 2011
at one of my Aironet 1200 the update through web interface of the IOS seems failing. THe webpage now looks damaged and not all points are availible.
I now want to update the IOS through telenet. A TFTP server is running and it is sharing the actual TAR-file.
View 7 Replies
View Related
Jun 3, 2004
I run into a 1230 that would have a Web page completely different than the usual one. Instead of getting the normal User/pass menu and then the menu on the left side frame, you get this:
Cisco Systems
Accessing Cisco AIR-AP1220-IOS-UPGRD "1200AP"
Web Console - Manage the ap through the web interface.
Telnet - to the router.
Show interfaces - display the status of the interfaces.
Show diagnostic log - display the diagnostic log.
Monitor the router - HTML access to the command line interface at level 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
Extended Ping - Send extended ping commands.
Show tech-support - display information commonly needed by tech support.
Everything appears to work ok in that peage excepting the "Web Console" link which would probably go to the usual home page.Getting to it from the console, everything looks to be ok. You can configure the unit using the IOS and the unit apparently works fine. I have 12.2(13) JA3 running.I defaulted the unit, reloaded the image... I'm still getting that home page.
View 4 Replies
View Related
May 28, 2013
We have a 1200 Aironet just go down hard for no reason through out the day, we replaced the Power Injector with a C2960 POE Switch, we also replaced the cabiling. When it goes down hard all three lights are still green as if the AP is still up. We verified the IOS with other stores and everything is the same on the configurations, versions, and IOS.
View 35 Replies
View Related
Jun 5, 2011
after purchasing a 11yr.old compaq presario 1200 from the swap shop,I was told by the seller,I would need usb ethernet adapter.I bought the adapter,but still can'get the internet.
View 1 Replies
View Related
Feb 7, 2013
Right now I have a westlll a90 750022 router working on a vista computer working fine but that's a rental. I have bought a Linksys E 1200 series router. The problem is now that when it is all hooked together our phones doesn't work, just dead that is, neither does the router.The router westell A90 from Century Tell works with a dual plug in, a DSL filter, the plug has one side for the phone line and the other for the DSL modem, in other words the westell router cannot be directly connected to the phone line.
View 1 Replies
View Related
Jun 9, 2012
I got my final assignment from school, and my teacher asked me to configure 2 Access Points (1200 series) directly on a Wireless Controler (Cisco 2106). I can't ask my teacher for any questions, cause he doesn't know how to configure it also, THAT's why he's asking me to do it.I've learned a lot of things about the default static interfaces (the "management" and "ap_manager" interface), but i can't seem to fully understand how to configure it.I want to use the Internal DHCP server of the WLC. How I can get those 2 Access Points working on the WLC. I only seem to get DHCP issues.
This is what i've done:
- Leave the configuration of the "management" and the "ap_manager" default (172.16.1.30 and 172.16.1.30). Bound to port 1
- Made a new interface "AP1" with IP-Address 10.0.0.10 (/24), default gateway 10.0.0.1. Primary DHCP server: 172.167.1.30
- Made a new interface "AP2" with IP-Address 192.168.1.10 (/24), default gateway 192.168.1.1. Primary DHCP server: 172.167.1.30
- Made 2 DHCP scopes within the 192.168.1.0 and 10.0.0.0 networks.
For some reason, when i boot up both AP's, the won't get any DHCP address.
View 13 Replies
View Related
Jul 19, 2011
I have two wireless networks configured in the AP1200, both SSIDs are configured with WPA.
SSID 01: configured whit WPA
SSID 02: configured whit WPA
I have configured the access-list number 700, and I would like to apply to a single network. Achieving the following:
SSID 01 : WPA + Mac Filter, using the ACL number 700.
SSID 02: WPA
How I can apply the list 700 to the first SSID only ??
View 5 Replies
View Related
Mar 17, 2013
I am looking at deploying a Cisco Virtual Wireless LAN Controller (vWLC 7.3).Do I need Prime Infrastructure to manage the environment, or can I manage my AP's (1200 series) using the vWLC alone?
View 6 Replies
View Related
Apr 4, 2013
I want to disable the MAC authentication that is configured in my Aironet 1200 Cisco Access Point, now set to "Local list only". I want that any wireless device can connect if the user knows the wep password.
I cannot find the option to disable the MAC authentication.
View 1 Replies
View Related
Jun 7, 2012
I am using 5 Cisco 1200 Series APs with both an A and G radio. Is there a benefit/problem to running both simultaneously? I would have one SSID and is setup for Fast Roaming as well.
View 1 Replies
View Related
Mar 22, 2011
I have a Cisco 1200 Series (AIR-AP1231G-A-K9) access point, I have been upgrading these models to lightweight mode but are having issues with one in particular, this access point keeps "rebooting" itself, I am assuming that the upgrade failed, how can I get the access point upgraded?
When I start to access the AP by typing "enable" and enter the password it starts resetting again.
I have reset the AP by the mode button, power option but still not working.
At this point I would even accept a fix to get it back to working condition. Here is a capture.
Cisco IOS Software, C1200 Software (C1200-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
[Code].....
View 15 Replies
View Related
Nov 5, 2003
For the past week, I've been looking to implement wireless technology at our educational site. We've conducted some tests with an AP1200 and we were satisfied with the performances of 802.11a standards.
Since one of our requirements is bandwidth, we are looking to implement a 802.11g standard for that need. Unfortunately, Cisco does not offer any client access adapter for that 11g standard as opposed of the competition. What kind of client adapter (PCMCIA) can Cisco recommend to work with AP1200 under the 802.11g ?
View 5 Replies
View Related
Jan 23, 2012
I have 2 Cisco 1200 G AP's connecting 2 different locations. Location A ( La ) I have a RVO82 router connected to a 50Mbit cable connection. I have an AP setup there using a 1 Watt booster and a 24db wire grid directional antenna. Only one antenna here, the other disabled.
At Location B (Lb ), about 1.5 miles away, with good to excellent line of site, i have the other setup as a WGB with a 15db wire grid directional antenna with a 1 Watt booster. Also only one antenna here, the other disabled.
WGB feeds a simple 8 port switch and in that switch i have a simple belkin wireless router setup as an AP for Lb's wireless access,
The signal strenght between the two locations is -49 to -52 db, depending on what time of day I check it.
I have had this setup for a couple of years now. I recently switched from a 3Mbit DSL connection to the 50Mbit cable connection hoping to increase my bandwidth with no luck.
.
When I first set this up i had a 6Mbit cable connection and it maxxed out at 5 Mbit at Lb. I thought i would be able to add more boosters and antennas as time went on to go from half duplex to full duplex (the way i think of it is one antenna receiving and the other sending, at both locations) so that when our ISP had faster rates available, i could upgrade. I recently read somewhere on the net that it is not possible to run full duplex in the AP to WGB setup i have. Is that true?
My main concern is increasing bandwidth on the WGB side Lb. When i upgraded to 50Mbit, i still only max out at 5mbit at Lb. Before i thought it was due to not being full duplex or weaker signal strengths (I've always had the 1watt booster at Lb, then i added one later to La with no benefit noticed except signal strength is better and uploads seem faster from Lb....)
View 7 Replies
View Related
Aug 21, 2012
I cannot currently connect to the internet on my Dell Inspiron 1200 Laptop running Windows Vista. This happened today after uninstalling Adobe Photoshop Lightroom 4, although I have no idea why a network problem could be caused by a software removal. Both my wifes smart phone and my own work on the same connection from the Sky wireless router that distributes the signal but the Windows network diagram show an excellent local connection to the computer from the router and no connection at all to the internet. When I try to diagnose and fix through the Windows link, the following message is shown: "Cannot Communicate with Primary DNS Server (192.168.0.1). Network diagnostics pinged remote host but did not recieve a response." Windows has reset the network adapter for the wireless network connection but this does not repair the problem. The problem still exists.
View 6 Replies
View Related
Nov 20, 2012
I just got a Linksys 1200 wireless router and wanted to know how (and the best way) I can turn it off (besides unplugging it) when I am out of town?
View 3 Replies
View Related
Jan 11, 2013
I have two different LAP 1300 and 1200 in my network and I need to add theme to the WLC,I successes to add one of theme by the option 60 in the DHCP pool at the Core SW,How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
View 4 Replies
View Related
Dec 13, 2002
Is there any detailed documentation on the Site Survey Client mode on the AP 1200?When using this mode I cannot see any indication that it has associated withthe root AP. I would like to be able to pass traffic from the ethernet port to the root AP VIA the AP in client mode. The Ap in client mode shows the radio in blocking when in client mode, is this normal? Is there a way to manually change this to forwarding mode?
View 4 Replies
View Related
Oct 19, 2011
I've got an iPad2, which works without issue at home (1130 AP/ASA5505), but at my office, we have a 1200 series AP. It's hit and miss, but other people who bring iPads in have noticed the same issue--our internal SSID is non-broadcast. Even though the SSID is previously configured and works on occassion, there are times where it won't even see the SSID at all to connect.
This happens with iPad and iPad2, iOS4 and iOS5...
LIke i said, works fine on my non-broadcast SSID at my home on an 1130 AP...
View 12 Replies
View Related
May 17, 2004
how i can limit the bandwidth for a all my client conect to the AP, i have a Aironet 1200 with the 12.2.15 code.
View 3 Replies
View Related
Aug 14, 2011
Is there a way to configure client/user to AP authentication without using encryption for joining to an wireless network? What we need to do here is protect network access at our hotspots by enforcing a password to get connected. The other part is making it compatible with every possible device so we need to have encryption off. We have a mixed environment at this time until everything is upgraded. Aironet 1200 series and some new Aironet 1142 models. No controller, all standand alone AP's
View 2 Replies
View Related
Jun 7, 2012
I have a WLAN with 5 1200 Series AP (A/G) configured for Fast Roaming using the Cisco supplied documentation. Can I use one user name for all of my devices to connect to the Internal Radius Server? This would be similar to having a passphrase for WPA.
View 3 Replies
View Related
Jan 22, 2013
I would like to be able to have a few "guest" users on the Wireless network for visitors. Is there any method to have a prompt for "Username / password"? I would like the user accounts to have different expiry periods if this is possible. My current config is attached. The SSID "test" appears on the network. The SSID "test111" does not appear.
View 1 Replies
View Related
Dec 3, 2012
I have a office network that was setup before I started. We have a 172. subnet and a 10.2 subnet. When users on Wifi get a 10.2 address ( ran out of 172 address ) they are not able to get out to the internet. But if the laptop is connected to a LAN port and get a 10.2 address they are able to get to the Internet. Not sure if its the Aps I need to configure or the Pix seeing that if they get a LAN address of 10.2 everything works. This is becoming a bigger issue now that the company has out grown its main subnet (172.)
APs= AIR-AP1231G-A-K9
Vlan = 172.16.1.XXX
Vlan2= 10.2.0.XXX
Hardware: PIX-515E, 64 MB RAM, CPU Pentium II 433 MHz
View 9 Replies
View Related
May 15, 2012
We had two dozen Aironet 1200 access points and a controller donated to us from a local hospital that no longer needed them. My boss would like me to set one up with 3 VLANs:
- encrypted VLAN for staff
- encrypted VLAN for students
- unencrypted VLAN for guests
Ultimately, we'd like the staff VLAN to have access to all internal network resources, the student VLAN to have access to several pre-defined printers, and the guest VLAN is web-only access. Whether the controller we were given will accommodate that, we won't know until we get one Aironet 1200 programmed and connected to the controller. For the time being, I just want to get this access point programmed with the 3 VLANs.
I'm easily able to get it running a single SSID (non-VLAN) network and confirm that I can use that network fine. However, I need to set up these 3 VLANs. I can connect to it via telnet if that'll let me program it faster.
View 7 Replies
View Related
May 15, 2012
I am running the upgrade tool on Aironet AP1230B-A-K9. I can't join the controller by using the upgrade tool. the error is "AP does not have Supported Radio". What radio is the upgrade tool or controller look for on Aironet 1200 series? This AP is running 802.11b. However, I have several APs which the same model is running on the same one controller. The controller is model 4402.
View 8 Replies
View Related
Nov 20, 2011
we have a wireless network composed by Cisco Wireless LAN Controllers (WLCs) and Access Points (APs) providing access to a large university.
For WLC we're using the 5508 model (four controllers in total) with the latest software version - 7.0.220.0.
For APs we're using the 3500 Series (AIR-CAP3502I-T-K9) and the 1200 Series (AIR-LAP1262N-T-K9), also with the latest version (upgraded automatically by the WLC). We have around 200 APs. We have established V LAN's specific for the dynamic interfaces (providing the W LAN's) and a management V LAN's (id 254). Our users are experiencing performance issues with the network, specially when the number of users connected is high (around 1700~2000 users).
Analyzing the packets received by a client, we detected a lot of Gratuitous ARP packages originating from the WLCs, for each APs. According to Wire shark:
No. Time Source Destination Protocol Length Info
31 31.954314000 Cisco_61:xx:xx Broadcast ARP 42 Gratuitous ARP for NNN.NNN.254.63 (Reply)
33 32.552240000 Cisco_61:xx:xx Broadcast ARP 42 Gratuitous ARP for NNN.NNN.254.236 (Reply)
34 32.559302000 Cisco_61:xx:xx Broadcast ARP 42 Gratuitous ARP for NNN.NNN.254.115 (Reply)
35 32.616899000 Cisco_61:xx:xx Broadcast ARP 42 Gratuitous ARP for NNN.NNN.254.171 (Reply)
[ code]....
Cisco_61:xx:xx is the WLC mac. All these IP addresses (NNN.NNN.254.XXX) are APs.
As you can see, the clients are receiving broadcast related to the APs in the management V LAN (254). In our understanding this traffic should occur only between WLCs and APs. We are already using two separate ports in the WLCs - one for the 254 V LAN (management) and other for the dynamic interfaces (W LAN's).
We have left a ping command running in the client, and have noticed that when the clients receives many of these broadcast the connection fluctuates. Such broadcasts from the management network in the W LAN's are expected behavior?
View 6 Replies
View Related
Jan 20, 2012
I have cisco aironet 1200 series Acess point i want to configure wep with mac authentcation .
If any document with GUI configuration
View 11 Replies
View Related
May 29, 2012
I has 4 VLANs and I want a MAC address has access to a VLAN, but not to another.
I used ACLs, but this will block the access to the access point, How to get the mac address will have access to a VLAN, eg no other Vlan? I has 4 VLANs and I want a MAC address has access to a VLAN, but not to another.
I used ACLs, but this will block the access to the access point, How to get the mac address will have access to a VLAN, eg no other Vlan?
View 6 Replies
View Related
