Netgear WNDR4000 Keeps Getting Hacked

Aug 23, 2012

is there anything I can do to prevent this? My last password was yUe!k837A!*5L^PcWgw@H06^ using WPA2-PSK [AES] and they still get through? I turned on the allow list to only allow certain devices through and they somehow add themselves to this list as well? WTF?

View 10 Replies


ADVERTISEMENT

Netgear WNDR4000 Wireless Does Not Work When Secured

Oct 23, 2011

I recently bought a Netgear WNDR4000 router. The wired network is working fine, but the wireless network is giving me problems I don't understand.

I am using the following equipment to connect to the wireless network:

- Samsung Galaxy S2 mobilefoon (supports N speeds)

- Asus laptop (supports G speeds)

With both devices I want to connect to the 2.4 Ghz (b/g/n) wireless network with the following settings:

- Channel: auto
- Speed: 145 Mps max.
- Security: WPA2-PSK [AES]
- Preamble modus: long
- Fragmentation length: 2346
- CTS/RTS: 2347

Latest firmware has been installed.

Here is what happens:

- When resetting the router to factory settings I can connect with both devices mentioned (security is not enabled)

- When setting the WPA2 security key for the first time, I can connect with both devices.

- When I try to connect with either device for the second time I cannot connect, messages (from mobile phone):

The nework SSID is visible Trying to connect Connection broken Network remembered

And then a loop is present that keeps trying to connect, but almost never succeeds. Maybe once in a hundred attempts. When a connection is made, it works fine for as long as the connections stays present. After the connection is broken, it all starts over again. The 5 Ghz network is behaving exactly the same (only tested with my mobile phone, laptop doesn't support 5Ghz network).

I have lowered the speeds and tried different channels, but behavior stays the same.

View 1 Replies View Related

Netgear N750 WNDR4000 - Laptop Only Connects To Router When Right Next To It

Jul 30, 2012

My laptop is unable to connect to our router unless I am right next to it. I am in a split level house. When I go downstairs in our family room the laptop will not connect or is very slow loading. Once I move the laptop next to the router everything is fine.

The lap top is an HP Pavilion with Windows 7. The router is netgear n750 WNDR4000. :Laptop was connected to internet this afternoon now this evening I have problems.

View 1 Replies View Related

Netgear N750 WNDR4000 - Internet Disconnects Every 15-20 Minutes?

Nov 2, 2012

So I recently moved a little bit away from where I was. My new area only has one internet provider available called "Hot Spot". We got the 10 down 5 up plan and I get what I paid for in that respect. My issue is that it won't even stay up for longer then 20 minutes. At first I was using the Netgear N750 WNDR4000 router, but I switched over to my ASUS RT-N56U router thinking it might fix the problem. Same thing happening with this ASUS, but when it goes out and I try to load a web page I get the error "you have set the wrong dynamic or static IP address for your RT-N56U." The router setting is set on automatic IP so I'm not sure if that's the problem. I called the ISP and told them I have Dish for TV and they said that is most likely the problem as it can often conflict with the IP or something like that. So I called Dish and they sent me this "Hopper Internet Connector" which supposedly fixes this issue because it directly connects it to the router instead of wirelessly. That still didn't fix the problem. I have tried turning wireless off completely and it still happens. I have reset the router to factory settings probably 4 times. I really don't know what else to do..

View 4 Replies View Related

Netgear WNDR4000 With Xbox 360 Slim Via Wireless-N Adapter

Aug 30, 2011

My friend has had constant issues with his wireless network using his dated Linksys router. So he finally decided to upgrade to the Netgear N750. It's a dual band router that simultaneously broadcasts 2.4 and 5 GHz bands. He setup the 2.4 band for the laptops and mobile devices to access, and the 5 band just for gaming on his xbox 360 Slim. He immediately ran into a problem. The 360 slim's built-in wireless card only picks up 2.4 GHz frequencies. To remedy this, he purchased Microsoft's xbox 360 wireless-N adapter as it can pick up 5 GHz frequencies. However, there was no change after plugging the adapter into the 360 slim. His HP laptop can see the 5 GHz network just fine, so we know it's being broadcast. Could it be the xbox is out of range of the 5 GHz band? Is the adapter not functioning properly with the 360 slim?

View 2 Replies View Related

How To Update Netgear Wireless Router Firmware Wndr4000

Jun 11, 2012

I'm not a computer whiz and need exact instructions for how to update the firmware on netgear n750 wndr4000 wireless router. I called netgear and they wouldn't I don't want to spend another 100+ on a router.

View 3 Replies View Related

WNDR4000 Corrupting File Transfers?

Sep 29, 2011

Netgear Wireless Bridge connects to my long term hotel's wifi, and feeds via ethernet into the Internet port of my WNDR4000.WNDR4000 has my Desktop and WHS connected via gigabit, while the HTPC is 450mbps wireless N with an Intel 6300n, and my Macbook air is connected via 5ghz wireless n as well.I'm having a very bizarre issue where all large file transfers - even over gigabit - are corrupted, while direct downloads are not. I've been pulling my hair out trying to figure out why I CANNOT make a working windows install disc from a tech net iso, and eventually starting checking sha1 hashes. This is how I discovered that direct downloads to machine's hash correctly, but if I transfer it to another machine the sha1 is completely different.

For example, if I download the iso on my macbook air and transfer it to my WHS, the hash is correct on the MAcbook but on the WHS it fails. If I download it to my desktop and transfer it to the HTPC or WHS, same thing happens. There errors are bad enough that Windows setup errors out with a corrupt file error if I make the disc from a networked machine. I have to use the local file to get it to work.

View 2 Replies View Related

My Private Ip Add Is Been Hacked

Mar 12, 2011

my private ip add is been hacked by someone, I have chk from various sites but the host name is unavailable so pls let me know how to get the host name of that pc & how can i get my ip 10.62.11.33 back to my org

View 1 Replies View Related

To Prevent Being Hacked From The Internet

Apr 9, 2012

I share my internet connection with my roommate who is very tech savvy. I found out yesterday that he has been hacking into my gmail account and reading my emails. I didn't think it was quite possible and I'm very surprised. He manages the internet connection and has full access/control over it.what can I do to prevent him from accessing my information?

View 3 Replies View Related

Routers / Switches :: How To Make Sure I'm Not Being Hacked

Feb 2, 2011

How can I make sure I'm not being hacked by a jerk neighbor? Until recently his D-Link repeaters IP addresses showed up on my T Mobile tethered connection.

View 3 Replies View Related

Cisco Firewall :: 5060 PBX Behind ASA Got Hacked

Nov 13, 2012

We have a costumer who has an asterix PBX behind an ASA i configured, the PBX i did not configure, we have several customers with the same setup. Today we have noticed that there PBX got hacked and was making calls to very expensive phone extensions. The guy who configured the PBX is saying that its the ASA who got hacked. In my opinion it is not the ASA that got hacked but i think there is something going on on the internal network.
 
They from th PBX says when he scans the IP of the customer who got hacked he sees port 5060 sip is open. but in the ASA ther is no port forwarding on that port, how is this possible?I also scanned it myself and it says port 5060 is open, which is weird because there is no port forwarding on port 5060.

View 11 Replies View Related

Sl2-141 Siemens - Router Can Be Hacked Throw Xml File

Mar 7, 2011

I have the same problem connecting my sl2-141 siemens router to thomphson cable modem. What I have heard is that the router can be hacked throw the profile.xml file,one can change the connecting type to "dynamic ip",what i need to know is what entry in the profile.xml file t5o change to what value.

View 6 Replies View Related

Hacked System - Lost My Administrator Status

Dec 16, 2011

I have been fighting with a wireless network hacker for months with no success. I have tried reloading Windows XP. but the reload contains things like Redhat and linux programs that do not even exist on my xp install disk. How can I find this wireless hacker and h9ow can I get rid of his control programs?

View 7 Replies View Related

How To Change Linksys Router Password (If Hacked)

Jan 20, 2011

How can I change my linksys router password because i would like only me the one who,s using my connection because somebody hack my password!

View 1 Replies View Related

Cisco Firewall :: Webserver Hacked Behind ASA 5510

Apr 24, 2011

I have one webserver which open for public via http and https. The server sit behind Cisco ASA 5510. Today our webserver have been hacked by someone. The index.html has been replaced by hacker own index.html file. Is it anyway to detect who did (by IP) this? is my Cisco ASA can give any clue about it? How to prevent from this happening in Cisco ASA? FYI, my ASA only allow HTTP and HTTPS port from outside to internal. This ASA is solely dedicated to protect the webserver.

View 3 Replies View Related

Beetel 220BX Modem Gets Hacked Everyday Despite Of Changing Password

Jan 27, 2012

I am in a problem, my modem gets hacked everyday, such that many of the sites do not open and only "http://212.113.36.83/" opens instead of sites like yahho.com, sify.com. I checked on internet many people are facing such issue.Only thing I can do to resolve this is to reset my modem, but still this gets hacked even on changing my password.I am not able to understand how is it possible to modify the settings of modem when I have changed the password.Modem Model: Beetel 220BX.

View 5 Replies View Related

Linksys Wireless Router :: WRT120N Cannot Reset Password And Hacked Internet

May 28, 2012

I cant remember my password and i lost my cd installer.  someone hacked my internet line<  I want to change my password but cannot get through the router mainframe.How can I access my router?

View 3 Replies View Related

How To Get Into Netgear To Put Security On

Jan 7, 2013

How to get into netgear to put security on

View 2 Replies View Related

Netgear Wnr2000v2

Sep 19, 2012

I just got a foscam camera. I am trying to be able to connect to it from my phone while I am not home. I am having one hell of a time trying to connect to my router, I haven't been able to yet. I am using port forwarding, have followed all kinds of instructions I found on the web, and none work. I cannot get port 80 to open. I have a net gear wnr2000v2.

View 1 Replies View Related

Netgear - Internet Light Will Not Come On

Jul 7, 2011

I recently reset my router as I did not know my password and I needed to find out what the WEP was. Now the internet light will not come on. I have followed instructions on setting up the router as if it were new and still no luck.

View 3 Replies View Related

Broadband :: PC Won't See Netgear Modem

Apr 18, 2011

I am hard wiring a Netgear wireless modem DG834G to the LAN connection on my PC. The modem lights up, the internet light flashes then goes green and the connection to the PC is lit. My PC wont see the modem - when I type 192.168.0.1 it cannot access the Netgear setup page. I have tried swapping the cable and even bought a PCI Lan card and installed it but the modem wont work in either port? I've had the modem checked out and it works fine it's just something in my PC stopping it from seeing the Modem. At present I have a USB modem hard wired which works fine. I unplug this when trying to setup the NEtgear modem...

View 6 Replies View Related

Can't Access NetGear WNDR3700?

Apr 7, 2011

I cannot access the setup page, even without the modem connected to the router, even after pushing reset button. It says I have limited access both to the wireless and to the wired connections, but won't let me access the internet (via the separate modem)I can access the internet via the modem fine

View 2 Replies View Related

Netgear Wna3100 Keeps Disconnecting?

Nov 7, 2012

I have a Netgear Wireless USB Adapter (WNA3100) for my PC. The router is in the other room (approx 5-6 meters away) connected to my flatmates laptop. The adapter worked fine for almost two months, but at the past 2 weeks it keeps disconnecting in every 2-15 minutes, for 1-3 minutes. I have Windows 7 and I'm not familiar with networking issues so the only thing I did was to reinstall the driver and update it, but this didn't work.

View 6 Replies View Related

Assigning A Static IP To Netgear 300?

May 20, 2011

I posted of an issue we were having but I feel like I was getting ahead of myselfBasically I need to know how to do 2 things.I want to assign a static IP I purchased from Comcast to my Netgear N300 router and then in turn want that IP address to be linked to the server here in our office so that when people use the Remote Desktop Connection it directs them to the proper machine.

View 5 Replies View Related

Best Settings For Netgear CG3000?

May 16, 2012

I got a new modem from Optus Australia and they sent me this modem netgear ofcourse , and I wanna know what's the best settings for it cause I'm dropping signal from my ps3 (im using wi-fi) and lagging online,

View 9 Replies View Related

Netgear Port - What To Put In The Ip Address

Aug 18, 2011

I just need to know what numbers to put in this Server IP AddressI tried putting a 0 and 1 at the end.

View 5 Replies View Related

VPN Between Shrew And NETGEAR FVS338?

Feb 15, 2012

I set up my FVS338 netgear firewall to accept vpn client connection, opening the vpnipsec door (UDP 500) either on the router DG834 and the FW.After that i set up an IKE and VPN policy following the netgear wizard.Opened the Shrew VPN access manager and configured all the fields according to NETGEAR FVS338 settings.[CODE]

View 3 Replies View Related

Can't Connect To Netgear Router?

Jun 24, 2012

when i click on connect to network nothing happens. it doesn't do anything, but if i plug in my old router it will connect just fine. It's just the new router

View 1 Replies View Related

Netgear Router Not Working

Feb 5, 2012

I pressed the reset button on my netgear router (WGR614 v7) and now the wireless light will not go on and i can't connect to it because I don't have a ethernet cable.

View 2 Replies View Related

DVR Not Recognized Through Netgear Router

Mar 20, 2011

I have a DVR connected to CCTV cameras that I would like to connect to my computer via Ethernet and a Netgear N150 router which also handles my broadband. A program called VideoViewer is installed on the computer which works with the DVR to view images on the computer via ethernet.it works with a Zoom router, but not the Netgear.

View 3 Replies View Related

Netgear N300 - How To Enable Dmz

May 5, 2011

The first time i had to set dmz i had free tech support from the company. no my free tech support has expired and they want money for tech support now.I would like to know what ip to put in my dmz setting, my ip is supposed to be static, but it changes every few months anyways.I'm aware that having dmz open is a risk, but i have a software firewall.i have my router setup so my 360 and my pc so i need dmz, , if i did not have dmz i would be setting up forward ports for quite some time, as i play multiple pc games.

View 6 Replies View Related

Netgear N-150 Router Not Working

Sep 2, 2011

When I first got my Netgear N-150 router, the wireless speed on it was great. However several days passed and I started to notice the speed was decreasing; because I have HughesNet (I hate it) I thought this was the ISP's fault and called them and they said my speed had not gone down. During the day, the signal is fine and is at full bars and the speeds are OK. During the evening/night hours the connection becomes faulty and the laptop will disconnect from the network altogether. If I plug the ethernet cable directly into the router, the speed is OK also. I have taken the security off the connection to see if it will make any difference; it doesn't. I don't know if I need to buy a new router or what. I know my way around computers and routers (not entirely though) and I cannot figure it out. I have 2 laptops with Windows Vista both with home Premium.

View 11 Replies View Related

Netgear Factory Settings?

Nov 17, 2012

I have rebooted my netgear router to the factory settings and now the internet wont work , i have no idea how to get it to work again. On the box all the right lights are green exept the internet light which is red.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved