Result From Netstat Local Address (Interwise)
Jul 11, 2011I got a strange result from netstat (at least it's the first time) tcp 4 local address : .*interwise. What is it ?
View 6 RepliesI got a strange result from netstat (at least it's the first time) tcp 4 local address : .*interwise. What is it ?
View 6 RepliesI have a problem with LMS 4.2 user tracking.When I generate a report on all my network all mac address are ok but there is no Hostname/Ip address in the result, except for 2 equipments.the only difference between these 2 equipements and the rest of the network is that they are connected on a not routed vlan. All the other phones, computers are connected on a routed vlan.I have a Nexus 5k as core and 2960 as access. Routing between vlans is done with the NexusMy DNS server is ok and reachable.
View 2 Replies View RelatedIs it possible to assign public IP address as Router's local IP address (RVL200, RVS4000)?
View 1 Replies View RelatedI've recently been taking an interest in netstat and learning how to use it,since a friend of mine has had trouble with his wifi he has speeds of 60mbps via Ethernet but wifi is slow i though that was odd and so tested my laptop on his wifi it seems i have the same issue so i'm wondering if my netstat is looking ok or if i have too many connections that shouldn't be there?
View 1 Replies View RelatedEarlier today I ran a netstat, I hadnt use the computer for almost an hour so I was suprised to see that multiple connections ('Time Wait') to my router 192.168.1.1 had been made. I dont understand how that could be since I had not logged into the router for some hours.
View 1 Replies View RelatedI was using command prompt and typed in netstat -a to see opened ports on my XP computer. Then I found a weird result I have never seen it before.
It was Proto local address Foreign address state
TCP myXP computernameort# 192.168.1.1:domain Fin_Wait_2
What does this 192.168.1.1:domain mean? I believe 192.168.1.1 is my gateway router, but why it says :domain? few minutes later, I typed netstat -a in the command prompt to check it again, but it wasn't there anymore. does this mean my computer is on a domain network or something? As far as I checked, my computer doesn't seem to be on a domain network, but I just don't know what it means.
Is there any way to see on what ports a Cisco 5510router is listening to just like a "netstat -an" on UNIX would do. I could easily do a portscan to give me this report but would prefer having the information through a show command.
View 4 Replies View RelatedI am on BrightHouse cable internet and running a Netgear WGT624 v3 wireless router and WPA-PSK + WPA2-PSK. Computer1 is the only computer on the network at present and is connected via CAT5 cable. No wireless computers here are turned on.If I enable wireless radio, my SpeedTest (www.speedtest.net) is consistently 2- to 3 Megs slower than when wireless is turned off. I have run this comparison over a dozen times spread out over about a 14 hour period.
View 8 Replies View RelatedWe install cat6 at university. some of the length exceed 100m. Fluke test show FAIL result. does it really matter for the usage in learning and researching? or does it affecting the quality of IP phone?
View 1 Replies View Relatedhowdy,im having trouble with my LAC.it just keeps identifying.i have tried everything,uninstall/reinstall, netsh winsock reset,netsh int ip reset,disable/enable.windows diagnostics comes back with invalid ip address,and modem hardware failure.device manager lists the network adapter as working,yet it doesn't here's my ipconfig[CODE]
View 5 Replies View RelatedIs it possible to get the result in th event list in the form of graph, ie. like delay,throughput in the form of graph
View 3 Replies View RelatedI have a Netgear N900 WDR4500 Dual Bank Router. Which range extender should I use for the best result?
View 1 Replies View RelatedI had just restarted my computer last night, and may have ended a process on the task manager that might have caused my internet to cease working and this error message to appear. Ive tried resetting the modem/router, resetting winsock and tcp ip whatnot in the command prompt?
View 5 Replies View RelatedServer 2008 has two Nics one connected to outside switch and has internet, other Nic is connected to local siwtches which has 20 systems connected locally but does not have internet. Local systems were getting IP from server, but there was not internet on the lan systems, I restarted the server and local systems lost IP address. earlier everyting was fine.
View 2 Replies View RelatedCharter tech came today to solve my problem of my new modem not working, he fixed the Modem but i think he did something to the lan proxy settings after.I'm trying to set up my Belkin wireless G router but i do not have the orginal CD. What should my address be under the "Use a Proxy server for your LAN" checkbox and what is the port and should i check off the bypass proxy server for local address box?
View 4 Replies View Relatedi m not about to convinced what above are mentioned coz. i am having same problem (tried already above given tricks but noway to geting intenet access) is anbody there to reply from this tech center or simply this i called tech center without tech people..
View 1 Replies View RelatedI couldn't find a section for the 651.
Alright so I have an SSH server running on my network. I can successfully connect to it from a local computer using the server's internal IP address, AND I can connect to it from a remote computer using the server's external IP address (it's properly port forwarded).
However, when I try to connect to the server from a local computer using it's external IP address, I get a connection refused error. Is there something I'm missing?
Last week I upgraded the firmware in my D LINK DIR-601 from 1.01NA to 1.02NA. This resulted in breaking my VoIP service (causing one-way audio on incoming calls - callers could hear me but I could not hear them). I am using a SIP-based service from Speakeasy (Broad soft) with a Cisco 504G phone. Once I downgraded the router back to 1.01NA, the service started working again.
I don't know if anybody else has reported an SIP-related issues with this firmware.
I recently bought one RV180W and two WAP121 in order to make a wireless extension of a network.I configured RV180W as Router and the three of them have the same SSID and password.Also, I added in RV180W WDS configuration both MAC Addreses of WAP121's and in WAP121's WDS configuration the MAC Address of RV180W.Even I tried in WAP121's with and without encryption using the same WPA Key of the RV180W.
The thing is that is not working at all. They work great separately but right WAP121 can't stablish WDS link with RV180W neither do the left WAP121 with RV180W.I tested WDS configuration of WAP121's and they can see each other between them using standard WDS configuration, so I assume that WDS function of WAP121's works great.Finally I try the same config but setting RV180W in WDS Bridge and WDS Repeater without any different result.Do I have any chance to make the topology I showed up would work? How do I have to configure the RV180W and WAP121's?
[Env on my lab investigation]
supplicant - W7 with cert
authenticator - Catalyst 2960 with IOS 15.0(1)SE2 /newest/
authentication server 2x - W2008/NPS like a RADIUS server
The problem is the end station that are still connected to the supplicant port /use a EAP-TLS/ after the reboot supplicant! All of them will be put into the Guest VLAN instead of static VLAN 34!
[The question]
What is wrong and how to configure/tune and what authenticator or authentication server to prevent after the reboot to observe a authentication timeouts? Of course the supplicant after 20 minutes /next EAPOL start farmet put into VLAN 34.
[Code] ........
I am trying to connect my WDTV Live to my desktop PC, and I connect to the net through a wireless connection to my router. Because its in the other room, I can't connect my WDTV Live to the router without running cable along the floor. Having said that, its not far away from my desktop PC, so I'm trying to connect them directly via cable. The problem is that my WD keeps telling me that it can't obtain an IP address and I don't know how to fix it or what values to put in.I've tried power cycling, manually setting an IP address (192.168.0.5), using different cables, all with no success[CODE]
View 1 Replies View Relatedhow can i block local server ip address in WAP321?I set captive portal web page and user accounts for guests but I still can map into my local server once the guest account is log in to CP.
View 1 Replies View RelatedNexus Core switch 7K Gives arp request for his own Local IP address continuously. This Logs keeps on coming for the past 2 months.
The Ip Address 10.80.18.1 is an secondary IP address of vlan 18 , which is used for Teleprescence.
interface Vlan18 no shutdown no ip redirects ip address 10.80.18.252/24 hsrp version 2 hsrp 18 preempt priority 110 timers 1 3 ip 10.80.18.1 secondary ip 10.80.18.254
2012 Nov 12 18:22:06 FRMA_BK1_CSN7K_01-COR %ARP-3-REQ_IP: arp [3829] Sending A
RP request for local IP address 10.80.18.1 on Vlan18, request from pid: 3834
2012 Nov 12 18:22:07 FRMA_BK1_CSN7K_01-COR %ARP-3-INVAL_HDR: arp [3829] Found
[code]....
I'm adding another router to my home network to extend my WiFi range. (Linksys e2500.) I'm trying to change its IP from the default 192.168.1.1 so that it doesn't conflict with my primary (dhcp) router.
To isolate matters I've reset the router to factory settings, turned off my mac's WiFi and then connected the Mac to a Lan port on the router. Now I can view the router's admin page at 192.168.1.1.
Now I change its local IP to 192.168.1.3 and leave the subnet as 255.255.255.0. The router reboots and after several minutes is inaccessible at any IP I try (still hardwired to the Mac with WiFi off). Ifconfig doesn't show the router and the only way I can get it back is to factory reset it again.
I have a Cisco ASA 5510 I am using ASDM 6.1
I have a LAN and a DMZ and an internet connection. I am using one of the internet connection IPs to host a HTTP service on a server in my DMZ. (its the same interface as my internet connenction but a different IP to the one used for internet connectivity)
so say my LAN is 192.168.1.x
and my DMZ is 172.168.1.x
I can access DMZ from Lan and vice versa. when i try to access the public IP (or URL) from a pc in my LAN i get nothing.
I have enabled DNS rewrite (doctoring) but it is still not working. the HTTP service is available from other sites.
I installed WS-C4506-E 3 day ago. I discovered someting different module status Right at the end of the module ( WS-X4648-RJ45-E ) show red led. this is not port led i try to reset module several time. but it's same status. but this is operating now nomally I upload picture.. and this is module status and diagnostic result
Error code ------------------> 3 (DIAG_SKIPPED)
This Case is DOA(Dead of arrival ?
C4506#sh modChassis Type : WS-C4506-E
Power consumed by backplane : 0 Watts
Mod Ports Card Type Model Serial No.---+-----+--------------------------------------+------------------+-----------1 6 Sup 7L-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP7L-E ABCDE1234562 24 1000BaseX (SFP) WS-X4624-SFP-E ABCDE123456 6 48 10/100/1000BaseT (RJ45) WS-X4648-RJ45-E ABCDE123456
M MAC addresses Hw Fw Sw Status--+--------------------------------+---+------------+----------------+---------1 b0fa.ebe5.16c0 to b0fa.ebe5.16c5 1.1 15.0(1r)SG3 03.03.00.SG Ok 2 b0fa.ebc6.5b70 to b0fa.ebc6.5b87 1.2 Ok 6 10f3.1197.1490 to 10f3.1197.14bf 2.1 Ok
[code]....
when I ping another workstation on my local network I should get back it's local IP but instead I am getting an ip address that resolves to somewhere in Germany! In fact if I ping any bogus name, I mean anything, it returns this same address 62.116.181.25. If I shut down my cable modem then everything resolves correctly. And yes I have DNS relay enabled because it seems to be the only way to get the workstations to resolve external sites correctly.
View 2 Replies View RelatedI am working on Cisco 3550 switch on a certain requirement. I have got an access point connected to the switch and few mobile phones connected to the access point. I get the list of mac addresses connected to the switch ( Both access point's mac address & the clients addresses) by "show mac-address table dynamic" command. However, i am unable/confused to get the output of the following scenarios:
1. I would require to export the mac address from the switch to the local machine in any format (May be by using an SNMP tool, if available) so that the same needs to be used in my C# for development.What would be the way for the same ?
2. The mac address in the mac address table doesn't get updated dynamically. (Eg Scenario: A wifi client gets connected to an access point which inturn is connected to the switch, the mac address of the client shows up in the switch table. However if the client is disconnected, the client's mac address would still be displayed in the switch table )
After clicking on below path we are not getting option as should be reflected. Below is the snapshots for the issues.
Access Policies > Access Services > Default Device Admin > Identity
i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
View 1 Replies View RelatedI switched from Time Capsule with AirPort to E2000 and have a problem with configuration.I use the same IPs as in AirPort and E2000 gives me an error:"The WAN IP address cannot be the same subnet as the Guest Network IP address" and I can't save configuration.But in my opinion they are different.I use "Static IP" option and I have IPs from my ISP: [code] So WAN IP is different subnet as LAN and I don't know what to do now. It worked with these settings in AirPort and here I can't proceed.
View 2 Replies View RelatedI am having an issue where occasionally the Sidewinder starts to see my internal RFC 1918 address instead of the configured external address of my firewall. This is for peering between the two. The error they see on the Sidewinder is:So instead of seeing the external peer address he sees a 10.220.3.18 address. We are not sure what triggers this becuase normally he see's my 63.117.98.222 address.
View 5 Replies View RelatedI have an old ASA 5505, and I'm having some trouble with Nat Hairpinning. I've done this with other firewalls before and I am having no luck now. I have an internal address that I wish to forward from an external address- so if someone goes to 123.456.789.012:3456 then it will forward to 192.168.1.244:92 (All numbers are arbitrary here- only for illustration). I have and Access Rule and NAT and PAT set up so that I can get in if I originate from outside the LAN. What I am trying to do is to have this work from inside the LAN as well- so that if I am at my desk, and I connect a device and type in 123.456.789.012:3456, it will deliver the content at 192.168.1.244:92. The problem I am having is that it just isn't working, and I cannot figure out why- When I started here, there was an address configured to work this way, and it still works- I just cannot find what is different between what I am doing and what the person who configured it did.
View 7 Replies View Related