Tenda W541u Usb Adapter Not Connecting
Sep 14, 2011My adapter is not connecting to DSL router.I am using Window 7 ultimate
View 1 RepliesMy adapter is not connecting to DSL router.I am using Window 7 ultimate
View 1 Repliesits possible to connect to the internet via usb adapter to my laptop, then connect an access point to my laptop so my ps3 can connect wireless?.....the reason i ask is my connection is on the 3rd floor, which cannot be moved, while my ps3 is in the basement and barely has a signal and keeps logging out out of psn....
View 3 Replies View RelatedBasically I bought two ethernet adapters from amazon and have connected them up properly to the router and my laptop through my homes plugs. For some reason my laptop cannot pick up any internet signal from them displaying 'no network access'. When I've run the troubleshoot it occasionally will say that the IP address is not valid. I've tried a variety of different settings but cannot seem to get it to work.
View 7 Replies View RelatedI have a Toshiba Equium A200,(from new some time back) however, i have had it updated with new 500mb drive etc! I also some time back installed Windows 7 home. At first all was well, then a few months ago i noticed (upon star-up) that the network adapter was not connecting to my Belkin router? The Network & sharing centre tells me that it is connected, although the icon on the bottom toolbar shows a yellow triangle & reads No Internet connection? I have to go through the same process evrytime to get connected, which usually takes approx. 5 mins That is to follow the Network/share centre's troublshooting? I have updated the adapter Driver, yet still the problem exists?
View 3 Replies View RelatedI got this wireless Linksys ae1000 adapter about 3 weeks ago on amazon and it worked fine for 2 weeks by connecting to the Internet and it had excellent connection then it stopped detecting my network. I tried updating it with the Cd and it said it was up to date. The computer is a Compaq presario and is about 14 years old. I looked in device manager and there were no? s or !s in adapters.
View 7 Replies View RelatedThis only started to happen recently. when I log into windows, it creates a big fuss about connecting to my router...It takes a good 5 minutes of plugging and unplugging my adapter and restarting my router.
View 10 Replies View RelatedI have an HP Pavilion desktop computer running Windows XP Home Edition. It used to never get internet wirelessly for some reason until one day i played around with it. I don't remember how but I got it to go online and it worked ever since. Just recently i have moved from my previous home and have finished setting up both of our computers. The Vista (the one i am using to write this) is an Ethernet connection and is having no problem connecting to the internet. Although, the XP for some reason will not connect to the internet. The adapter will find the network but when i type in the WPA2 it tries to connect but i think it times out or something. I have tried several solutions and none have worked. My father has a Toshiba laptop and he is currently having no issue with connectiong wirelessly to the internet. Our old verizon router stopped working when we attempted to set it up after the move, so verizon came and istalled a new one. It is secured with a WPA2 code whereas our older one was secured with a WEP code. I think it might be a problem with either the router or the wireless adapter itself (which is a Linksys Wireless-B Network Adapter). Also, when i logged into my router manager thing, I noticed that under the network, it said the XP was an inactive Ethernet Connection and not Wireless.
Here are some of the XP's specs:
Hewlett-Packard Pavilion
Intel[R] Pentium[R]
4 CPU
3.40 GHz
0.99 Gb of Ram
I have TPNW721N wireless network adapter on my Compaq Presario sr1520nx. I am using latest driver. I am using Windows XP. Using Windows Zero Wireless.When I connect I get a red X under the red and side of wireless connect icon on system tray.
[URL]
It would not connect to the internet even after I click repair.If did an ipconfig /all and this is what I got-
Windows IP Configuration
Host Name . . . . . . . . . . . . : Myname
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
I'm trying to connect to the internet on another PC (on my desktop, not this laptop I'm sending this request on). I know my network is working OK, because I'm on it now (on my laptop), but the Realtek adapter is not connecting on my destop PC.
View 14 Replies View RelatedI will be purchasing the AV200 powerline kit from Tp-link and want to know whether there will be any issues in connected them through either a power strip or double adapter?
View 8 Replies View RelatedFor quite some time my linksys wireless g notebook adapter hasn't been connecting to the Internet at all. I go to my Internet options and my house's Internet router doesn't show up. I remember a long time ago I was clearing space on my computer because its and old one and it runs slow Because I don't have much memory and I might have accidently deleted the linksis progam / installation. And I have no way of re-intalling it. I think the only way of re-installing it is using the linkage disc but I lost it in some boxes packed in storage.
View 1 Replies View RelatedMy laptop is an ACER Aspire 4750z. I installed Ubuntu version 12 for a change, then I got fed up with it and installed Windows 7 back. Before installing Ubuntu my wireless network adapter used to connect to wifi, now after reinstalling windows 7 it wont connect to WiFi. The wireless icon in the task bar shows the available wifi but it doesn't connect.My wireless network adapter is Atheros AR5B97
View 1 Replies View RelatedI've installed a Trendnet TEW-694UB wireless adaptor on my laptop and am trying to connect to my home network. I get a message "Acquiring network address" but it never connects.
View 5 Replies View RelatedI have the same problem[CODE]
View 2 Replies View RelatedI am using Toshiba Satellite L305D-S5895, with Windows 7 Home Premium.My laptop has been running beautifully since I updated from Windows Vista to Windows 7 Home Premium in Fall 2009. However, today the laptop has not been connecting to the wi-fi. It could not read the Atheros wireless card built into the laptop, and the all the network settings showed was the Ethernet adapter (realtek). I tried restarting and shutting down the laptop but it still did not read the wireless card (though the wireless light on the laptop was on, indicating that the wireless is on).
Then, after 4 hours of leaving the laptop shut down, the wireless started again. However, a half hour later it was down again, with the same problems already stated. The light was on and the card was not read. During my time online, I did manage to download the driver update from Toshiba website (Atheros Wireless LAN Driver for Windows 7 (32/64). I tried to install it but I received error messages, including: I tried again but I still received this message, but with a different file: I have no Ethernet connectivity and I need to use the wi-fi.
I bought a netgear n600 wnda3100vs wifi adapter for my desktop.I installed it and everything. Now when I try to connect, it finds my router, but for some reason it will not connect. My router is a 2wire that runs on 802.11g[CODE]
View 1 Replies View RelatedI have a belkin surf n300 usb wireless N micro adapter. No problems installing this adapter on a HP Desktop running windows 7. I have tried to install on a gateway laptop also running windows y 64 bit. In device manager it show that the product is working. It will not connect to any network. The adapter is an F7D2102 az ver. 2011az
View 2 Replies View RelatedI cannot connect wan using tenda router, lan connection works.
View 1 Replies View RelatedI'am having problems when connecting to the internet. I'am running Win7 64-bit and i have Belkin USB wireless adapter( Belkin surf N150) When i first bought the adapter it didnt connect to internet, so i though it is not working and i got it replaced. I got the same problem with the second one as well, and then i have changed the wireless mode on the device manager from: IEEE 802.11b/g/n to: IEEE 802.11b and eventually i have connected to internet without any errors, but in this mode the internet is unbelievably slow which is very slow when compared to another wireless mode where i have changed it from. So my question is why i can't connect to internet IEEE 802.11b/g/n in this mode? The weird thing is that some times it connects to internet with no error and dissconnects again in a short while. Also when the windows tries to repair it, i get this report:
Windows Network Diagnostics Publisher details
Issues found
Problem with wireless adapter or access pointProblem with wireless adapter or access point Not fixed
Refer to Windows Help and Support for more information about wireless connectivity problems Failed
Reset the wireless adapter Completed
Investigate router or access point issues Completed
[code]....
Trying to connect my Dell Dimension E310 to my Linksys WRT54GS with a TRENDnet wireless N USB adapter. It sees the router, it connects, I show strong signal strength, but get a "limited connection or no connection" error back from the router...can't get on the Internet. If I use an Ethernet wire and connect it to the router, it can set up a wireless connection with the machine, I can unhook the hardwire, and I'm good to go. But every time I reboot, it won't connect unless I set it up with the hardwire first. Impractical.All other devices attached to the router are fine and connected to the Internet. How can I get the router to maintain the settings for this new connection so it will connect wirelessly when I reboot?
View 1 Replies View RelatedWRT610v2 running latest firmware.xbox 360 sees both the 2.4 network (ssid = network1) and the 5.0 network (ssid network2) when it does its scan.Initially, xbox showed network strength for 2.4 network at 3 out of 4 bars and 5.0 network at 1 out of 4 bars.Connects to 2.4 network just fineWon't pull an ip address and reports "Not connected" when I select the 5.0 network.I tweaked the wireless settings per some suggestions I found in this forum and now it shows the 5.0 network at 4 out of 4 bars signal strength. Also turned security on and off and xbox 360 reported the changes in security on the 5.0 network.So the xbox 360 is definitely seening the 5.0 network. and can tell if it is running WPA2 or not..If it can see the 5.0 network and recognizes what security and network type (infrastructure) is set, would would stop it from connecting to the WRT610n router and getting an IP address? No mac filters or firewalls are set and, again, connects just fine and gets an ip address if I select the 2.4 (network1 ssid) instead.
View 13 Replies View RelatedI have a Tenda W300d modem/router that works fine sometimes, but others, like now, it's being a real pain and not connecting with some of my devices, I have a PC, laptop, PS3 and phones that mostly happily share connection, the PS3 is connected via cable.sometimes it just won't allow things to connect, I try rebooting it, sometimes it works, sometimes not.IS there something basic I'm missing? the control panel for it seems quite comprehensive, but I'm no expert at it.
View 6 Replies View RelatedHow can i apply password on tenda router?
View 1 Replies View RelatedIv got tenda router that is connected to the internit but it cannot recognize the othe wan devise type livel one which is connected throgh wire to the wan router?
View 1 Replies View RelatedI got a new Tenda W311R+ Wireless-N Broadband Router yesterday. I already have a wired broadband internet connection in my home with a Beetel 110TC1 modem. I did following:
1. Connected the Beetel modem to the Tenda router using an Ethernet cable
2. Connected the Tenda router to my PC using another Ethernet cable.
3. Went to 192.168.0.1 (as mentioned in the instructions sheet which came along with the router)
Now, what should I set as the access mode, ADSL Dial-up or DHCP? Are there any other settings I should change in order to enhance the speed? I have Windows XP SP3. Also, do I need my Beetel modem or can I use the router without it?
I bought this Tenda wifi router and connected it.It's a chinese one and the user interface is not much friendly. It works fine but sometimes if u play around with it u will lose the settings you inserted in to it and you will need to reconfigure it.
My problem is my ISP seems to renew the IP's issued to their customers automatically every 10 hrs from the last login. But every other router keeps the connection alive but my router doesn't. It needs to be restarted in order to get the internet back online.simply said,u need to restart the router every 10 hrs.
BTW Never buy Tenda routers.
how to disable firewall on w302r tenda router?
View 8 Replies View RelatedTenda router w311r forgot password
View 3 Replies View Relatedneed to disable firewall settings router Tenda D840R
View 2 Replies View Relatedi have tenda ADSL router using the internet of Nepal Telecom, Nepal and distributed to two users. now i want to limit the speed of the other user to least and i want to achive maximum speed of the subscription but have no idea to manage it
View 1 Replies View Relatedi have lost my code from the tenda wifi router modem which we can use to put security.without it how to secure wifi?
View 1 Replies View RelatedHow do i have reset my trenda router without a disk?
View 3 Replies View Relatedcan i set up my W311R+ tenda wireless router without the software driver?
View 1 Replies View Related