Wifi - How Can Find Network Ssid
Apr 7, 2012my wifi network how to configure my mobile
View 1 Repliesmy wifi network how to configure my mobile
View 1 RepliesI am Using Micromax A75 how can i know my mobile wifi Network ssid
View 1 Replies View RelatedI'm trying to setup my wifi at home and want to cover all the areas under same SSID and allow roaming cross since one router can not cover 20000 sq ft over 3-4 levels.I anticipate at least 8 if not more to cover everywhere.How do I setup a WLAN network for myself. I have a cat6 cable running in quite a few rooms.Basically my end game is have uninterrupted wifi access everywhere in the house Possibly run a SIP based PBX over wifi wherever possible, close to 24 extensions.I also laid down cat6 in most rooms to allow to setup my own central media server with that as well but that's a different topic and forum I guess.Can I use the cat6 coming into the rooms, connect it to the wifi router and provide Internet access over wifi and use the router as a hub to connect a cat6 from the router for the media player and another one to a sip based Pbx extension or have the Pbx extension be on wifi?Damn sorry for such a confusing and loaded sentence.
View 18 Replies View RelatedWhy my network camera cant find the WIFI network when work well with the wired? The other WIFI devices such as notebook works well.
View 1 Replies View Relatedhow can i know my neighbor's wifi network password .i already know his computer ip address?
View 3 Replies View RelatedHow do i find my ssid router? I am trying to download Nintendo internet on my son's dsi xl.
View 1 Replies View RelatedHave a ZyXEL 600 wireless router - it has worked without issues for years.However yesterday evening my wireless router suddenly stopped broadcasting a signal. 2 different PC's and a wifi dongle attached to our TV were suddenly all unable to find my network.The WLAN light on the router was still lit up. I connected my Acer Aspire 5742Z laptop to the router via an ethernet cable and it worked fine. I connected to the router and it said there were no errors.
View 14 Replies View RelatedI updated the Firmware...then the WRT54GC can't work now,it's power led green and red always,I can't ping 192.168.1.1 via wired or wireless.wireless led shutdown.my laptop can't find any wireless network.
View 9 Replies View RelatedWhere do I find the router SSDI and password. I am trying to reinstall Linksys E1200
View 2 Replies View RelatedI'm facing a problem on vWLC. I configured the vWLC and Aironet 1252, I created 2 SSID with below settings.
1. WPA2 Auth 802.1X
2. Web-Auth
Inside Wireless, I configured this AP Mode as "Local", but all of the client device such as iPhone, Laptop can't find these SSID.
I have a dir-655 Firmware Version 2.00, hardware:B1 It's a new wireless router and it's just a week ago I got it.My problem is that the wireless is just stopping to work, it just disappear.When I do a rescan of wireless AP's the ssid and my AP is not showing up.I have to reboot the router the hard way by unplugging the power source.I have multiple computers and wireless devices, and they all loose connection and no one even see the ssid (AP) defined on my dir-655.It's connected to a cable modem switch (without nat), I'm running dhcmp on my router. No Qos engine is enabled.This happens when I'm working from home with a VPN tunnel from my pc to my companies network.I've tried to make a ticket on this on dlink support pages, but their support system only works on IE7, and the password is anyway rejected. how to solve the termination of my wifi ap?
View 9 Replies View RelatedMy 'main' Wifi SSID will just disappear and you can't connect to it. the guest account will still show up. computers/devices that are already connected will stay connected and will work fine, but anybody reconnecting will not be able to. Only solution I've found so far is to unplug and replug in my router
View 1 Replies View RelatedI have two WRT54GS routers. I want to extend my WiFi from the router connected to my upstream in the office to a second router in the living room. I want devices configured for the SSID and passphrase of my current WiFi (which is find in the office) to work seamlessly in the living room. I understand I can do this by running a cable and configuring router 2 as a client of router 1 with router 2 exposing the same SSID and passthrase on a different channel.
But I really don't want to run a cable.There is a point where a client can see router 1 where an AP would cover the living room.
Can I put router 2 at that point, have it connect wirelessly as a client to router 1, and have it expose as an AP using the same SSID and passphrase? Can this be done without wiring the router?
Region : Others
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
We are trying to use a TL-WR941ND purchased about a month ago, but it keeps hanging, usually within a day or so of operation.To be clear: by "hanging" I mean the device stops providing wireless services (its SSID is no longer visible in WiFi clients) and becomes nonresponsive to pings or control access attempts (via settings web page) from the internal network connections.The device is used in a very simple scenario, where it's being employed as a simple access point, not as a router. As such, the device's configuration is as follows:
* WAN interface is configured with a dummy static IP (10.10.10.10/24) with gateway and DNS set to the internal IP address of the actual routing device connected to the external world.
* LAN interface is configured with an IP address inside the actual internal IP subnet (192.168.1.0/24).
* DHCP is also disabled as this service is already provided.
* Wireless settings: radio enabled, SSID broadcast enabled, WDS disabled, 11bgn mixed mode, auto channel width, max TX rate, channel 7 (manually set). Using WPA-PSK security.
Rest of the settings are unchanged from their default values, as the device isn't being used as an IP router by any client - just as a WiFi/Ethernet layer 2 bridge. We're using what appears to be TP-Link's latest stock firmware for the device.The settings described above appear to provide the connectivity required by the WiFi clients. However, the device continuously hangs within a day or so of operation, requiring someone to physically attend to the device and cold-restarting it (disconnecting it from power and reconnecting it) to regain an operational state.
After performing a cold restart, the system log shows nothing beyond the startup entries: "System started" entry followed by security info entries regarding enabled protocols. Then the device appears to work well for a while, until it hangs again, forcing again someone to attend to the device, etc.
Im trying to hook my tv up to wi-fi and it is asking for the wpa passphrase
View 1 Replies View RelatedHow do i get into my ssid the wireless network is got my name on it
View 1 Replies View RelatedWireless Equipment
D-link DIR-655 router set to only N
Old Netgear Router used as access point set to only G (I set up as an access point by turning off DHCP, changing the IP adresss and set to only G.)
Wireless Printer (only G Capable)
Cell Phone (only G Capable)
2 Laptops (both N capable)
iPad (N Capable)
Roku Media Box (N capable)
Problem: If I put the router and access point on the same SSID then equipment that is N capable will connect to the G network.If I use two different SSID's then the printer is unreachable.Is there a way of either (a) having two SSID's but allow the printer to be seen or (b) having one SSID, with separate access points for N and G but not allow N functioning client to connect to the G access point.
How do I add a network SSID from/for a tablet
View 1 Replies View Relatedi have a net gear wireless router. I have set up my pc and games consoles and the wifi network has worked fine. However this was a while ago and now i cant remember the password so i cant connect any new devices. How can i change the password
View 1 Replies View Relatedhow do i find the wpa key for my Wi-Fi device
View 1 Replies View RelatedI have clearwire and I am able to connect to my old desktop but now I am unable to connect on my HP laptop. It gives a message that my wireless isn't connected but it is installed. Now they want my security key but when I put it in it comes back saying it is incorrect. I can't connect my Ruku2 for the same reason. Both show that I have wifi so it is really confusing.
View 1 Replies View RelatedI am trying to locate my wifi password somewhere on my own pc
View 2 Replies View RelatedHow can i find the security key for my own wi-fi network.
View 1 Replies View RelatedHow to find a password for wifi
View 1 Replies View Relatedhow to find wifi password
View 2 Replies View Relatedhow do i find my security key to my wireless?
View 1 Replies View RelatedI want to change the SSID on all my APs without it affecting the connected devicesThe users should possible not be affected with the connecttion to the wifi networkHow can I go about it?
View 3 Replies View RelatedSeveral days ago I had to change my router. The new one works OK except that I can't get the PC to link into the wireless while the SSID isn't being broadcast. Having read that it is a good idea not to broadcast the SSID for security reasons, I thought I would try it!
I am running Windows 7 home Premium and the router is a Draytek Vigor 2710 using WPA2. I can see the network when the SSID isn't being broadcast, it just refuses to connect to it. As soon as I switch on the SSID it connects like a dream.
My church has a AT&T wired modem and a Netgear Wireless router. Pastors office is on other side of church and he is losing signal occassionally. His network is showing two SSID addressed cgcg cgcg2
View 4 Replies View Relatedhow do you find a WPA-PSK for wifi from a laptop? (I forgot mine and cant get into my psp).
View 4 Replies View RelatedI'm having a bit of a trouble with my eMachines netbook M250. I was going to contact their customer support, but for some reason their services kept telling me that "That serial number is not in our database".I have 3 laptops and a desktop PC. Two of my laptops are connected through wireless and my Desktop PC through a cable. Now this small isnt finding the wireless network my other computer are connected to. It has found all other wireless networks, tons of them (neighbors, city wifi, etc), but just cant find my home wifi.I have reinstalled windows XP and reinstalled the wireless drivers. Also checked that they're the newest out there.
View 1 Replies View RelatedHow do I find my wifi password for my qwest account to use on my IPOD?
View 2 Replies View RelatedWhere I can find the WI FI security key in my computer ???
View 1 Replies View Related