Wireless :: Unable To Access Linksys Router Console?

May 2, 2012

My Linksys Routers IP is 192.168.1.1 am unable to access the console, although i changed the computers IP 192.168.x.y. i have tried by Hard Resetting the Router but still the same?

View 1 Replies


ADVERTISEMENT

Unable To Access Linksys Console

May 2, 2012

I have linksys ADSL Router which is having one line port for Phone Line and 4 Ethernet Ports.The Router IP is 192.168.1.1. When i connect this Router through one of its Ethernet Port to one of the Network Point(which is DHCP enabled)is working fine. I get the IP 192.168.3.x from my existing DHCP not from the ADSL Router which is enabled.Secondly, Although i can Ping the Router IP 192.168.1.1 from Wifi client 192.168.3.X, But when i try to open the Router Console a Login window open and is says " your are trying to access the Router in an insecure ways and it doesnt not authenticate ID and PWD.When i directly connect Router to my Laptop then am able to do so.

View 1 Replies View Related

Linksys Wireless Router :: WAG200G - Unable To Get 192.168.1.1 Setup Console In Bridge Mode Only

Jun 13, 2012

I'm using Linksys WAG200G Wireless modem and connection mode is "Bridge Mode Only", in this mode I'm not getting the 192.168.1.1 setup console and Wifi facility.

View 3 Replies View Related

Cisco Switching/Routing :: Unable To Access C2811 Router (AC Operated) Through Console Port

Jan 11, 2012

I not able to access cisco 2811 router (AC operated)  through console port when I try to access it by selecting COM Port, but I  able to access by selecting the TCP/IP option.

View 5 Replies View Related

Cisco Wireless :: Unable To Console Into 2600 And 1552 Series Access Points?

May 7, 2013

We are having a hard time to console into to the APs using the serial connection (USB to serial converter).We have tried the recommended settings (9600, 8 bits, no parity, 1 stop bit, no flow control (also tried XON/XOFF)) without any success.We are able to connect to 3560 series switches and 5508 WLCs using the same cables, notebook and application (putty, hyperterminal & secureCRT).

View 4 Replies View Related

Cisco Routers :: WRVS4400N - Unable To Access Admin Console

Jan 18, 2013

Although I hasten to point out that I have owned and used an 'IBM' type PC since 1988 and have always managed to get things configured correctly until NOW!
 
Apart from the last time I tried to use a Linksys product. I had the WRVS4400N recommended to us by a friend as we run a small FTP server to share promotional materials amongst sales operatives around the world, wanted to protect it from intrusion and was told that a Cisco Linksys product with a VPN was the way to go.
 
I duly purchased a WRVS440N and have been trying to log into the admin console via both browsers (IE9 and Google Chrome) that are installed on a laptop running Win7 which in turn is the only thing connected to the stated device via ethernet port 1... I have tried accessing it via http://192.168.1.1 and have even tried a suggestion from another forum to try https://192.168.1.1 - this only results in my being told that the address does not have a trusted certificate and I even tried every suggested workaround...
 
I have tried all kinds of reset periods from 10 seconds to a minute, both hot and cold and each time the result is the same - I type in 'admin' and 'admin' in the appropriate boxes and the dialogue box continues to return to the browser window with empty fields...
 
The shame is that I have managed to re-flash a BT Voyager 190 ethernet modem successfully with DynaLink v3.29a firmware (which allows it to be used with any ISP besides AOL [for whom this modem was solely intended]) and can set it up as a DHCP server, non-DHCP with a single link to another server or non-DHCP and no link.... The point is the modem works... I'm using it right now to type this! We have a single static IP from our ISP and the BT modem is working just fine (as is the TP-Link wireless modem/router that the WRVS4400N was intended to replace)... there are other options in it's firmware for port forwarding, etc and I'm convinced that it wil be adequate for use in conjunction with the WRVS4400N.
 
I have to concede that the WRVS4400N was not sold to us as NIB; it was sold as re-conditioned and was shipped to or via Ingram Micro Distribution from Cisco Systems, Veldweg 3, Herkenbosch 6075 NL (Holland) via UPS on or about the 31st of July, 2012... there is a shipping label on the original packaging that tells me that so it has in fact been back to Cisco at some point and for some reason.

View 3 Replies View Related

Cisco Firewall :: FWSM 3.2.6 / Unable To Access From Switch Console

Aug 15, 2011

I am having FWSM in active /standby mode deployed on two different cat 6k chassis. Unable to access the fwsm module from switch using ' session module mod_no processor 1 ", it throws error " % telnet connections not permitted from this terminal" Running Version 3.2.6 on fwsm, Cat 6k is running 12.2.33.SXH1,
 
switch#session slot 3 processor 1
The default escape character is Ctrl-^, then x.
You can also type 'exit' at the remote prompt to end the session
% telnet connections not permitted from this terminal
---------------------------------------------------------------------------
 
have allowed telnet on line vty, configuration on Line vty is simple allowing all transport protocols
 
line vty 0 4
exec-timeout 5 0
transport input all
transport output all
line vty 5 15
exec-timeout 5 0
transport input all
transport output all

View 3 Replies View Related

Cisco Switching/Routing :: 2960 / Unable To Access Switch Via Console?

Dec 27, 2012

I have 2960 switch and i can't access it using my console cable .I can access other switches in my network ( 3560 & 2960 ) but i can't access only this switch.may be the console port in the switch damaged? or it's a bug ?? !!! although the switch is worked normally.

View 11 Replies View Related

Cisco Switching/Routing :: Unable To Login Through Console Port On 1941 Router

Mar 12, 2012

I have a strange issue that I am having an issue figuring out. I am trying to login to the 1941 router through the console port. When I enter the username and password, which I just set, it fails. I am able to login under a different login but when I try to enter the enable mode the enable password doesn't work, which I just set as well. I can login with the TACACS+ login from a SSH session. Here is the line config:
 
line con 0
exec-timeout 15 0
logging synchronous

[Code].....

View 5 Replies View Related

Wireless :: Unable To Access The Linksys WRT54GL Router?

Aug 26, 2011

I had configured the AAA server on CoovaAP and was able to access the internet.I had configured the user name and password as a "testuser" and "password" respectively. With that user id i used to access the Coova AP router and internet.Now i want restore the WRT54GL firmware on Lynksys router. But with the used id and password which i had configured the router is not at all accessible. So i did 30-30-30 reset on the router 2-3 times. Now i can see openwrt login page with 192.168.1.1 IP address. It is asking for user id and password. I tried all the combinations of user id and password, but no luck. I browsed some link on the internet and some people have recommended that default user id as a "root" and blank password. But with that also the router is not accessible. I cant to do much on the router untill i will log in to router. I have spent lot of time on this. How to restore back the original WRAT54GL firmware on my router. Anyhow i want WRAT54GL firmware on Lynksys router

View 4 Replies View Related

Linksys Wireless Router :: Unable To Access E4200

Jun 15, 2012

Just got a new hard drive installed on my laptop, and now for some reason I can not access my router.  I am connected to the internet, and everything is fine there, but when I type the 192.168.1.1 and enter admin as the password, it shows that I am unauthorized.
 
I have a Linksys E4200 router

View 2 Replies View Related

Linksys Wireless Router :: Ea3500 - Unable To Access Ftp

May 4, 2013

after updating to smart wi-fi I can't access the USB FTP or off network.Only way it's accessible is from the computer the router is attached to via network drive.FileZilla gives me this error....."Connection attempt failed with "ECONNREFUSED - Connection refused by server".I've reset the router same problem.

View 9 Replies View Related

Linksys Wireless Router :: Unable To Access The WRT4G V2

Jul 20, 2011

I cannot access this router.  I have a cable modem from Comcast Is there any way to clear info, I have reset 50 time and it will ask for uname & paswrdWhat shall I do?

View 1 Replies View Related

Linksys Wireless Router :: Unable To Access WRT54GL

Aug 26, 2011

I had configured the AAA server on CoovaAP and was able to access the internet.I had configured the user name and password as a "testuser" and "password" respectively. With that user id i used to access the Coova AP router and internet.Now i want restore the WRT54GL firmware on Lynksys router. But with the used id and password which i had configured the router is not at all accessible. So i did 30-30-30 reset on the router 2-3 times.
 
Now i can see openwrt login page with 192.168.1.1 IP address. It is asking for user id and password. I tried all the combinations of user id and password, but no luck. I browsed some link on the internet and some people have recommended that default user id as a "root" and blank password. But with that also the router is not accessible. I cant to do much on the router untill i will log in to router. I have spent lot of time on this. how to restore back the original WRAT54GL firmware on my router. Anyhow i want WRAT54GL firmware on Lynksys router.

View 1 Replies View Related

Linksys Wireless Router :: E2000 - Unable To Access Web Setup

May 12, 2012

Just a day or two ago I was able to do what the title says, didn't make any adjustments to my E2000 while in it, had to find something though.Anyhow, connecting to http://192.168.1.1 results in "Unable to Connect", etc. Also tried it in IE9, Firefox Beta is my primary, and it still didn't work. Tried using Cisco Connect and it says it cannot connect to my router. I am wired to my E2000, which in turn is wired to my DSL modem (Actiontec GT701D-Its firewall not in use). I sitll have full connection to the internet as well as other wireless deveices do in my house.

View 1 Replies View Related

Linksys Wireless Router :: E2500 / Unable To Access Internet

Jan 22, 2012

Here is my setup.Using all MAC OSX I have AT&T DSL ISP connected to a (ISP provided) Speedstream 5100 Modem.I just purchased a Cisco Linksys 5200 N Router and I cannot access the internet. I followed the set-up instructions to the T but to no avail. I cannot find anything online about these two devices being incompatable.  Do I purchase a new modem? If so how can I be sure it's compatible with the router?

View 1 Replies View Related

Linksys Wireless Router :: WRT54G2 - Unable To Access Webpage

Jun 17, 2012

I trying to portforward on my WRT54G2 router but can't access webpage because I don't know the username or password. Is there any way to find out the password and username

View 1 Replies View Related

Linksys Wireless Router :: Unable To Access Most Websites Using EA4500

Dec 4, 2012

I have had my router for about a month and all the wireless lan stuff seems to be brilliant. Recently I signed up to an ISP (Plusnet), and can't access most websites. The ISP has told me that I should take this up with my Router company. I seem to be having the exact same problems as this guy was having [url]....

View 1 Replies View Related

Linksys Wireless Router :: E1000 - Unable To Get Internet Access

Sep 12, 2012

I've got a v1 E1000. Lately when I turn on one of my computers, or attempt to connect with my Motorola Xoom tablet it will show connected but I will not have internet access. Initially it will show that I have internet access but not work, then after about 1-2 minutes my PCs will show "No Internet access" for about 2-3 minutes, then it will show "Internet Acess" again and still not load. After that, in about 1-3 minutes the internet will start working and work as good as ever until I disconnect (manually or by turning off my computer) then connect again; the process described avove happens again.

View 2 Replies View Related

Linksys Wireless Router :: E4200 / Unable To Access After Reset

Apr 18, 2012

I just bought an E4200 and it was working perfectly, very easy to install, all that it promises. Then I had an energy peak. For some reason, don't ask me why, I did RESET the router not thru the web nor thru Cisco Connect, but pushing the reset button at the back. I can't access the router anymore ! It keeps asking for a password that is never accepted. I have uninstalled cisco connect and tried again. Nothing. The router is not found. Keeps asking for a password. I tried everything: blan+admin, admin+admin, the password I used to have (provided at the cisco connect uninstall).It seems that the RESET never worked. The router is working thru cables, meaning when I can connect to the internet wired. But the router is never found wireless.How could I update the firmware if the router is not recognized (or if I don't have a username+password) ?

View 9 Replies View Related

Linksys Wireless Router :: WRT54G2 - Unable To Access It Via Webpage

Feb 28, 2013

I have a continuing problem with my WRT54G2 wireless router.  I set up my network, changing the password for the router, and I change the SSID, as well as the encryption password.  When I set it up, and after changing passwords etc.  I always log off, go back and log on, and it works fine.  Once I set up the network, over time, I'll notice a device will no longer connect via wireless.  When that happens, I try to log on to the router, and can not connect to the router using either Firefox or IE.  When I try, I get Internal Server Error, or just nothing.  I can ping the router, and if I run an IPCONFIG at this point, the default gateway does show 192.168.1.1.    Every time this starts to happen, I must do a hard reset of the router.  Once  I do this, I can connect, and log on using the default settings, and re-set everything.  This is a HUGE pain, as it takes a lot of time, and happens way too often.

View 2 Replies View Related

Linksys Wireless Router :: E4200 V2 Unable To Access Most Websites

May 24, 2012

I recently bought the E4200 v2. When I first installed, I ran the firmware update and then performed a hard reset (push reset button for 20 secs). I then began to enter all the PPPoE information and network settings into the new router (verified these settings with the existing WRT54GL router I'm current using and they all matched). I then disconnected the old router, and powered up the E4200. I was able to access the new router (192.168.0.1), I could see all previously shared files/computers with the new router, but I could not access most websites - usually I got a timeout error, or they eventually loaded in 10x the usual speed. This was typical of both laptops - one wired, and one wireless.  My wireless handheld device could connect to the wireless network, and ran a speeedtest.net test, and upload/download speeds were normal - but I could not access the internet from the device. When I switched back to the old router, everything worked perfectly again.  I have tried some suggestions on changing MTU values, but that did not seem to make any difference.
 
As a work-around, I have ended up keeping the WRT54GL as the main router and using the E4200 in bridged mode for wireless only (not what I ideally would like)..

View 4 Replies View Related

Linksys Wireless Router :: Unable To Access WRT310N Through Browser

Feb 9, 2009

I am unable to access my router through the ip address (192.168.1.1) even though I have verified that is the address. To be sure, I did an ipconfig release/renew, but no results. I want to limit a user's network access by MAC address and I don't think I can do that without accessing the router thru the ip address. 

View 2 Replies View Related

Linksys Wireless Router :: WRT54G / Unable To Access Gateway

Jul 18, 2006

I'm unable to access my linksys wireless g broadband router (WRT54G)'s access gateway. (192.168.1.1)The gateway page doesn't load, at all. It doesn't ask for the user or password at all. On any of my internet browsers (firefox, and internet explorer)Anyway of fixing this would be appropriate.

View 2 Replies View Related

Linksys Wireless Router :: E4200 - Unable To Access Shares?

Sep 18, 2011

 Upon attaching my external storage I was able to create a share, copy files and access it successfully from everywhere. Now when I attempt to add an additional share, the router lets me create it  but when I try to move access groups over from the available groups, the >> buttons are greyed out. The one working share has the admin and Everyone groups with access. Any additional share I create has the admin group in it by default, but I can't add any more groups. I am logged into the router as admin and logged into the pc as a local admin.  I am also unable to change the rights from my pc on a share (access denied).  I AM, however, able to map a drive to a new share successfully, but when I copy files over, a few minutes later the filenames are there but they show up as 0 byte files.

View 7 Replies View Related

Linksys Wireless Router :: Unable To Access Most Websites With E4200

May 3, 2012

I've been on DSL with British Telcom Infnity (FTTC) since March and had no problems with the service.  My router,  however, an Apple Time Capsule, was not so reliable and needed a reboot every few days,So I just purchased the E4200 V2The Setup completes OK and PPPoE logs into my ISP fine.  But then I hit the problem.Most of the websites I use simply won't load . In Safari on my OS X Lion, Macbook, I get an error like this "Request Timeout. The server timed out while waiting for the browser's request. Reference #2.525fdd58.1336048435.0" In IE on my Windows XP laptop, the error is "Internet Explorer cannot display the webpage"But some websites still load fine.  So [url]..., loads instantly. Most other sites I try, including [url]... - won't load at all. (Plusnet is my ISP)If I connect to my work VPN, I can browse as normal

View 9 Replies View Related

Linksys Wireless Router :: Unable To Access Internet With E1500

May 8, 2011

I just bought a Linksys E1500 router and followed the CD instructions for setup.  It is wired to my desktop and I am unable to access the internet.  If I go direct to the modem and bypass the router the internet works fine

View 3 Replies View Related

Linksys Wireless Router :: Unable To Access Using Cisco EA2700

May 7, 2013

I have a Cisco outer EA2700 connected using a Lan cable, Lan cable works fine as I connected it directly to my PC, I am unable to access wifi network connection, I am able to search the router and also able to cnnect to the router, But wireless connection shows limited or no connectivity, and unable to access any websites. It was working fine till yesterday, I tried rebootng ad also unplug and replug the network cable also reset the router but does not work

View 1 Replies View Related

Linksys Wireless Router :: Unable To Access E3000 Via Https

Feb 29, 2012

I can not access my Linksys E3000 router via https://192.168.1.1.Before this mishap, I was able to gain access to my Linksys E3000 router via http://192.168.1.1 and/or the Cisco Connect software application on Windows 7. Yesterday, I went into my router's administration page and disabled http, and enabled https. I then closed out all browsers, restarted them and entered https://192.168.1.1
 
After that, I learned quickly I made a huge mistake to make these changes. I simply can not access my router admin wired or wirelessly. Accessing the internet works great, but router admin page is a no go.Firefox and IE states, "There is a problem with this website's security certificate." and was unable to proceed.Firefox even gave me the option to accept a security exemption to proceed, but that failed.
 
I have also tried using the Cisco Connect utility, and that also failed. I have taken these steps and not been able to access my router's admin page.I don't want to take the last final resort to reset my router and re-enter my settings again. I know I saved the router's backup file somewhere, but can't find it.Is there another way for me to gain access via https with http disabled? All I want to do now is go back in and change it back to enable http access.

View 9 Replies View Related

Linksys Wireless Router :: WRT54GL - Unable To Block Internet Access?

Sep 1, 2011

i want to block all internet access on all my computers from the time range of 9 PM to 8 PM. Yes, that gives 1 hour of internet access per day. However, it seems that there are certain rules of the router that won't let me do this. It seems I can't make 2 different policies for PC's within the same IP range (192.168.1.0 to 192.168.1.254) , it gives me the error: "The values you entered are invalid. Please try again."every time I try to do so. And when I try to give the time range from 9 PM to 8 PM it gives an error stating that the end time must be bigger than start time. I am using the WRT54GL with firmware v4.30.7.

View 5 Replies View Related

Linksys Wireless Router :: Unable To Access Wifi Options (wrt54gl)?

May 23, 2012

I own an AG214 ADSL2 router that I use for my desktop PC. I now however also have a WRT54GL for wireless connection. I  connected the WRT54GL to my AG214 via ethernet. Everything works fine, I have wifi and I can use it to connect to the internet. However when I go to my router (192.168.x.x)  I can't seem to be able to find a wireless tab to configure my wifi settings. The network right now is unsecure and has a default name (linksys). How do I access my wireless settings? When I access my router it does go to the AG214, do I need to access the WRT54GL? If so, how do I do that?

View 4 Replies View Related

Linksys Wireless Router :: Wrt120n Unable To Access Settings Page

Jan 6, 2012

Have a PS3 that will connect to my wrt120n if I unplug the modem and router then plug back in after 2 minutes. if I shut off my PS3 or after approx 1 hour, PS3 drops my connection. I'm trying to access my router page online but after entering the default into my browser, the pop up box will not accept any combo of entries to allow me access. I have an SSID name and my router is password protected. It does not connect me when I use any combo of user name or password or the default "admin".

View 2 Replies View Related

Linksys Wireless Router :: EA4500 Unable To Access Devices Remotely

Aug 19, 2012

I just switched to the EA4500 Router and I'm now unable to remotely access my camera devices.   I have done the port forward.   I can access the cameras from my local LAN both when using the local  10. ..and external 99 .. Addresses.   When I go off the local connection -   Access does not work. Slingbox did its auto configuration and I can access it.   I just cant get to camera devices (Panosonic, Foscam, etc.).  

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved