Wireless Connection Not Connected
Jun 19, 2011my lap top w says not connected with a red cross through it right bottom corner
View 1 Repliesmy lap top w says not connected with a red cross through it right bottom corner
View 1 Repliescant on that thing up it showz the WiFi is off no internet connected.
View 1 Replies View RelatedIt's been working absolutely fine for me for nearly two years and all of a sudden it doesn't want to connect anymore. When I turn it on it will connect to the wireless network and stay connected for five minutes tops before disconnecting. Sometimes the wireless network is still being detected, sometimes not, but when I click on it to reconnect it rarely does (and when it does, it will sure enough disconnect again in no time).All other devices in the house stay connected and work fine; it is only my laptop that has issues. I took my laptop to another house and it has the exact same issues so it's definitely the laptop itself and not the routers.I live in Pakistan and my broadband provider for this household is Wi-Tribe. I don't know the type of broadband it is. I have no Anti-Virus apart from Microsoft Security Essentials.
View 5 Replies View Relatedmy wireless connects perfectly but within a minute disconnects for no reason
View 1 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-58, x64 Family 15 Model 104 Stepping 2
Processor Count: 2
RAM: 1982 Mb
Graphics Card: NVIDIA GeForce 7000M / nForce 610M, 64 Mb
Hard Drives: C: Total - 140647 MB, Free - 62895 MB; D: Total - 11978 MB, Free - 1512 MB;
Motherboard: Quanta, 30EA, 86.09, None3
Antivirus: Webroot AntiVirus with Spy Sweeper, Updated and Enabled
Computer will connect to non secured WIXFDR-117 Clear wirless but when I set any authentication security types it only connects to the modemn and not to the internet.I get a Local connection only on the networking screen.I have tried WPA and WPA2 with TKIP and AES encryptions.It also will not connect using the ethernet cable on any settings.This computer did connect to a secured network though a 3 year version of netgear but I do not know the security settings.
I have a Linksys e2000 wireless router, my laptop connects fine, but as i keep hovering my mouse over the wireless icon in my system tray, it keeps changing Mbps from 130 at its highest going down into double digit Mbps, then back up to 130. Why wouldn't it stay connected at 130 all the time?Someone said to try lowering the beacon interval, fragmentation threshold, RTS threshold, and mtu size, but will doing that decrease the speed of my connection to the router?
View 5 Replies View RelatedHow do I take away the red X and the "Not Connected" for my DELL WIreless 1390 WLAN Mini Card in order for it to recognize my Netgear Wireless N-300.? I am working with Windows XP. I have all necessary boxes checked to allow for 1390 to coordinate all wireless functions.
View 1 Replies View Relatedjust got a new router/modem and found the network but can only get local connection no internet. Im running vista?
View 2 Replies View Relatedwe recently upgraded our home router and have been having trouble ever since. Our old router was a Netgear one, so we bought a newer netgear model. Since installing the new one we can not get my daughters laptop, an iPad and ipods to work on the wifi. My computer is wired into the router and works fine, it is just the wireless. All of these things worked perfectly using our old netgear wirelss modem and all of them can find the wireless network on their list of available networks, they all say that they are connected with a good signal, but when they try to browse the internet or check emails, it comes up saying not connected to the internet. We even bought a range extender because we thought the signal might not be strong enough between the new router and my daughters bedroom which are at opposite ends of the house and on different floors, but it made no difference and wasn't a problem before.
Anyway, the router we bought is a Netgear N150 wireless modem router DGN1000, the cables are plugged in to ports 1 and 4 ( there is only 1,2,3 and 4 to choose from). The extender is a Netgear universal range extender WN2000RPT
I have tried turning it all off and back on again, have uninstalled it and reinstalled it, but still nothing. Daughters laptop uses Vista and she has McAfee security. Exactly as it has always been and has worked fine using our old wireless router, just not this new one.
I had to recently reinstall windows xp, I have upgraded to service pack 3 by pluging into a wired connection downstairs, I was given a media link wireless usb adapter, It was working fine before I had to reinstall. Now it will connect to my network but the packets are low 1-16 and I can not access the internet.
View 13 Replies View RelatedI have the AE1000 adaptor on my wife's computer and direct wired on mine is the E2000.The e2000 is set to 2.4mhz and when connected to the wireless network, my wifes ae1000 shows it is connected at 144mbps.When I change the e2000 to 5.0 mhz and then my wife connects to the internet, she shows the ae1000 at 16-53 mbps. When I switch back to 2.4 she shows 144. I thought that when the e2000 is connected at 5.0 she should have a "faster connection".
View 1 Replies View RelatedMy WAP4410N is configured with 4 seperate SSIDs. Two of the SSID status are showing "Enabled". The other 2 are shown as "Connected". The one that are showing as Enabled are not receiving any packets. Devices connected to the SSID that shows "Enabled" are unable to connect to the network. Any one else encountered similar issues before? This issue just surfaced few hours ago. The device has been using for around 2-3 years with minimal issues.
View 1 Replies View RelatedI just installed a E4200, and found that once I connected my Homeplug Powerline to E4200, the connected (wired / wireless) computer (with E4200) connection will be dropped. The connection become normal again once I disconnected the Homeplug with E4200.
View 5 Replies View RelatedRegion : Iraq
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : LATEST VERSION UPGRADED
ISP : Newroz Telecom
I purchased TP-link, i want to connect with ADSL modem, i connected successfully through pppoe it shows every ip through lan and wan connected, but it doesn't receive packets / bytes from internet, this is the first problem.the second problem is: i use UPS with TP-Link sometimes my electric power is low just with this tp-link it has problem and refreshing the tp-link
I have a Tenda router and Realtek USB wireless adapter. My 8200 has XP svce pk3. The adapter will not stay connected. Some times it shows connected with 100% signal strength and after few seconds drops out. I cannot find any radio switch on this laptop. Fn/F2 does not work and there is no mention of wireless in the bios settings. I feel that the radio is not switched on but how do I do this?? Is my configuration incorrect?
View 3 Replies View RelatedI have an Inspiron Mini 1018 which all of a sudden I cannot get internet access but I do have the wireless network as being connected. It was working fine but all of a sudden I can't get onto the internet. Have run diagnostics but it doesn't pick up any problems.
View 5 Replies View RelatedAs of last night my router has been producing slow connectivity when multiple users are connected to it, but it's perfectly fine when only one user is connected. I am on a laptop myself, but we also have a second laptop and a desktop where the modem and router are set up. I have upgraded the firmware so that is up to date. We have Comcast Fiber Optics so my internet speed is normally quite fast even when all of my computers are connected.
I am using DHCP Configuration. My Channel Width is set to 20 MHz and I am using Channel 11. The Security Mode is set to WPA Personal. I had it on WPA2 Personal but I read that changing to WPA Personal might work and so far it doesn't seem to have done anything. I set the Beacon Interval to 50, Fragmentation Threshold to 2304, and RTS Threshold to 2304. Everything else is set to the default factory configuration.
Just today I received a notice that said "Windows has detected an IP Address Conflict", but ever since I reinstalled the Firmware it hasn't come back. I've rebooted both my laptop and the desktop to confirm it hasn't come back as well. I've tried everything that I could think of including reconfiguring my router and restarting my modem as well.
I have experienced some strange behavior of WiFi connection using WRT320N router. ISP provides me the internet in 2 modes (day and night). During day mode max speed is 24 Mb/s and during night 60 MB/s. Modem ADSL (Cisco EPC3010) is connected to Linksys WRT320N and on router is configured WiFi.Now issue. In the day mode everything is perfect. Cable connection gives me 24 MB/s and WiFi connection around 22 MB/s so not so bad. However when my internet speeds up to 60 Mb/s (cable connection via router gives exactly 60), WiFi connection instead speed up as well, just drop to max 17 Mb/s. I have tied several different settings on the router including changes in WiFi band, channel width, different channels (now channel is setup to 1 which is maybe not totally free but no so occupied) and others but unfortunately without significant improvement (in many cases connection just slowed down more).
And some details:
Wireless configuration (now)
Band: 2.4GHz
Mode: Wireless-N only
Channel Width: Auto (20MHz or 40 MHz)
Channel: 1
Wireless adaptor: Intel Centrino Advanced-N 6230 (I know that this doesn’t mean anything but Win7 shows that connection is established with speed 144MB/s)Router firmware and WiFi card updated to the newest version.
I have a very annoying problem with my Linksys WRT54G2.When I connect a wireless device (laptop, phone, TV, Ipad) to my wireless network I only see a Local connection, no connection to internet. After resetting the router (power off for several seconds) the internet-connection is available again.I have to do this every 1 - 2 days.
View 7 Replies View RelatedWhen my download starts or reaches half way the internet connection stops. How to keep the net connection connected all the time? and specially during downloads?
View 1 Replies View Relatedwireless internet connection connected no bit it says no internet access what is the problem
View 1 Replies View RelatedThe route is connected to that. Wirelessly, there are two laptops and sometimes an iPad and sometimes a Wii. Verizon DSL. I barely use my laptop during the week, but did notice some connection issues maybe Thursday and Friday nights. All day yesterday and today, as well. I will have a connection for maybe 5 minutes and then get errors loading webpages (and/or videos stopped). I will repair the connection and it will say everything is fine but it will not work, repair again or disconnect/reconnect(sometimes, several times) and then it works for 5 minutes or 20 minutes before the same thing happens. The other laptop is having the same problems. What I have tried so far: restarting the PC, both laptops, the router, and the modem. Resetting the modem. I have not moved any furniture or anything that would cause interference. I am worried because I have been trying to make more money and started at this site called Treasure Trooper which seemed okay-surveys and the like. There were a few pay-to-download things I downloaded but did not run. Avira found a trojan and I deleted it (not sure if the two are related, but I can not think of anything else I have downloaded or installed in the past month or so).The old PC is off; the Wii is on but probably only maintains a small connection. The iPad and other laptop are not mine, but if either is on, they probably have little to no activity right now since the user is away.
View 1 Replies View RelatedFrom last two days, my internet disconnecting frequently. Modem catching correct ip but no internet connection.modem catches correct ip address n other things, it shows connected to home network (i.e hathway) and internet access is allowed but browser display error 'webpage is not available' (same result for login page of ISP). I have tried different browsers but same result. windows network diagnosis center results as "your computer appears to be correctly configured, but the device or resource is not responding " OR "login.hathway.com is online but still not responding after couple of tries"(second error is not correct word to word tht was the over all meaning of it)In ping test, ping to default gateway gives very good result as 5-20ms but 'request time out' for url...So am not understanding whether it is my pc's problem or from ISP.I m using single pc with wired modem. windows 7 no changes made in network n sharing center.
View 2 Replies View RelatedI have connected the router to my pc but can not start the connection
View 1 Replies View RelatedWell this is what it is telling me when i do the diagnosis.... also it says it could be my firewall settings that are also blocking connection.
View 1 Replies View RelatedI'm having 3 desktop computers. Out of these three, one PC (PC1, windows7) is connected to internet modem and other two (PC2 with XP,PC3 with XP) are sharing internet connection.
In PC1 I've installed Hamachi Logme In (virtual network). This software also creates one "Hamachi Network Interface" in "Network connections".The Problem is that each time I start/reboot PC1, I get connected to other 2 PCs but can't share internet connection, until I toggle (enable/disable) the state of "Hamachi Network Interface"
(PC1 is at some distance with PC2 and PC3, and each time I need to remotely login to PC1 and toggle Hamachi network in order to access internet).
a couple of days ago we lost our connection for a few hours, but I wasn't really concerned as it happens from time to time, but on my computer it never returned. I can connect to the network but I am not able to reach my router management page nor do i have any real connection. All the other (several) devices work perfectly in the house. Also if I use my phone's USB tethering I do actually have connection (although pretty slow). I've ran Spybot S&D and Malwarebytes Anti-Malware but neither of them showed anything of relevance as far as I am concerned. It doesn't work in safe mode either.
I use a TP-Link TL-WR1043 router and a TL-WN722N as the receiver.
Here's the problem, there are 4-5 computers connected to their router's network through both wire and wireless. Some of the other computers are used to stream tv dramas and what not, and it really kills the connection and I am barely even able to open a simple webpage.
View 2 Replies View RelatedI got a used computer from my relatives. When i enable my local area connection then it says aqcuiring ip adress for a while. Eventually it stops trying and says network cable unplugged. It worked fine at my relatives place, but not at my place.
View 14 Replies View Relatedno matter what device is used to connect to our Linksys WRY54G v2.0 Router, whether it be CAT6, internal wireless card (Intel Wireless LAN (802.11a/b/g/n), or USB wireless card (Linksys AE1000), she drops connections at random and frequent times and has to disconnect the device and reconnect to get internet back. She is still connected to the network though. The issue has been becoming more and more frequent the past few days and has been ongoing for a few months. We are at wits end with the issue. I looked on Linksys' website for updated firmware for the router AND the AE1000, no new firmware and same driver that is installed for the AE1000. We have tried to enable Multimedia Environment, Disable 802.11, unchecked "Automatically turn off device to save power", changed router channels from 6 to 1, have uninstalled ALL third party firewalls and AV/Spyware/Malware/Adware removal programs (but not before scanning the system), and lastly tried the DHCP Braodcast Flag Fix.
View 19 Replies View RelatedMy internet connection setup is: PC -> Trendnet 632 BRP wi-fi router (via Ethernet cable) - > D-Link DSL-2520U modem (via Ethernet cable, PPPoE) -> Internet. I have other devices connected to my Trendnet router via Wi-Fi connection (Notebook, PS3, XBOX, iPhone).My ISP gave me two DNS servers wich I have entered in my Trendnet. But when I look at the DNS tab in my D-Link I see two different DNS servers witch is not the same I entered in Trendnet.hey was set automatically when I created new DSL connection. I've also tried to leave the DNS adress tab as it was by default (0.0.0.0) in Trendnet router and after that my network still works normal. And when I look at the WAN status tab in Trendnet settings the DNS servers is set automatically to 192.168.1.1.So I have 3 questions for you:1) Do I really need to enter those DNS servers that my ISP gave me or I can just leave it to DHCP to manage them?2) If I have entered ISP's DNS servers in Trendnet then witch DNS servers is actually I'm using the ones my ISP gave me or the ones that my D-Link have picked automatically?
View 11 Replies View RelatedMy computer is not connected to the local area connection.even though the network cable is plugin.
View 1 Replies View RelatedI called my internet provider to come fix the problem and my internet was working PERFECTLY. Until, it started to mess up again. I don't know, what's wrong with it AT all. The Linksys box is working fine, the ROUTER is working BUT, my internet keeps dropping and takes HOURS upon HOURS to come back on, UNTIL I reset the Linksys box. Then it stays on for a bit. A few hours or a few minutes then suddenly, "No internet access."
View 3 Replies View Related