Get An Overview About Traffic In Local Network?

Jul 4, 2012

check the traffic produced by different hosts in a local network. In other words: which hosts uses how much of the bitrate.For example: We have a wifi network with four computers connected to. Lets say one is running skype, one is surfing in the internet and both left are just in idle mode. Is there a way to monitor the use of our bitrate such that I could see:"Ahh IP 10 is using 80%, IP 11 is using 10% and IP 12 and 13 are using 5% each on average!"

View 3 Replies


ADVERTISEMENT

Cisco Firewall :: ASA 5500 / ASDM - View Historical Metrics In Graph Form For Traffic Overview

Sep 25, 2011

Running an ASA 5500, and using ASDM to connect. I need to view the historical metrics in graph form for traffic overview, that is shown on the firewall dashboard. I have enabled historical data, but all I see the 5 minute intervals.

View 4 Replies View Related

Cisco :: 2504 / Rename AP Name In Overview (at Monitor > APs > Radios)?

May 29, 2013

I've got a Cisco 2504 wireless controller, and I'd like to rename the AP name in the overview (at Monitor > AP's > Radios) so that I know which unit is placed where and hence be able to troubleshoot more easily.I haven't found any info about this, and usually that means it's not an option, right? I realise the AP name field comes from the device itself, but it seems impossible to rename the device too since I'm running on lightweight, correct?

View 9 Replies View Related

Cisco :: 1310 Bridge - Transparent To Local WEP Traffic?

Aug 10, 2011

we have a 1310 connecting two buildings networks.inside each building we have a wireless network (Intermec access points).we are implementing WEP on the Intermec AP's.will the cisco 1310 allow the wep traffic without interference? or would i need to modify the 1310 somehow?

View 2 Replies View Related

Cisco Switching/Routing :: Keep Traffic Local Between Two Sub-nets Using 3750-X

Nov 13, 2011

We have a remote office with a Cisco 3750-X switch with the IP-Services feature set connected via dark-fiber to a 6509-E at the corporate office. We plan on migrating the remote office to a new network (new acquisition) to subnet 10.10.10.0 on VLAN 20 which has an existing  subnet of 192.168.100.0 and we would like to run both in parallel using their existing switches (Dell) and the new 3750-X.
 
I’m curious as to the best way to keep the traffic local between the two subnets using the 3750-X and if necessary put the 192.168.100.0 network on a VLAN. I thought about routing between the two networks via IP routing on the 3750-X but the new workstations default gateway is the 6509-E and existing workstations is a SonicWALL within the remote office. The default gateway for the new workstations can be moved from the 6509-E as a last resort.

View 5 Replies View Related

Cisco Firewall :: ASA 5505 - Cannot Ping Local Traffic And Hosts

Jul 24, 2012

I have, what I believe to be, a simple issue - I must be missing something. Site to Site VPN with Cisco ASA's. VPN is up, and remote hosts can ping the inside int of ASA (10.51.253.209). There is a PC (10.51.253.210) plugged into e0/1.

I know the PC is configured correctly with Windows firewall tuned off. The PC cannot get to the ouside world, and the ASA cannot ping 10.51.253.210.

I have seen this before, and I deleted VLAN 1, recreated it, and I could ping the local host without issue. Basically, the VPN is up and running but PC 10.51.253.210 cannot get out

ASA Version 7.2(4)
!
hostname *****
domain-name *****
enable password N7FecZuSHJlVZC2P encrypted
[Code]...

View 2 Replies View Related

Cisco Firewall :: ASA 5505 Doesn't Allow Local Provider SMTP Traffic

Aug 7, 2011

We are using several Cisco ASA 5505 with the 8.05 OS on it. The problem is that the SMTP traffic of my ISP(Telenet) isn't passtrough the ASA, I'm using outlook 2010. Before there was also a problem with our local exchange server but I solved this by disabling ESMTP checking in the policies, but it didn't worked for my local ISP.

View 4 Replies View Related

Cisco WAN :: 8080 / Destination NAT To Redirect Outgoing HTTPS Traffic To A Local Server

Jul 14, 2011

I have got a Cisco router connected to a LAN and to the internet.I was wondering if I could nat https traffic from inside to internet to a local server (Proxy) on a given port for example tcp 8080.
  
int tunnel0
ip address 192.168.0.1 255.255.255.0
ip nat inside
 int fa0/1
des internet connexion
ip address 41.x.x.x.x 255.255.255.248
ip nat outside
 ip access-list extended Proxy_Redirect
permit tcp 192.168.0.0 0.0.0.255 any eq 443

View 1 Replies View Related

Cisco Firewall :: 5510 How To Configure Local LAN SMTP Traffic Sending Through New Leased Line

Jun 11, 2012

We have configured ASA 5510. We have configure Ethernet 0/0 ( Outside ) connected with ADSL line and Ethernet 0/1 ( Inside ) Local LAN. we have configured NAT and all the traffic is passing through outside interface. Now we have connected ethernet 0/3 ( leasedline ) interface with static public IP. Now we want to allow  SMTP traffic to pass through  from this interface.
 
How to configure it if we want our local lan SMTP traffic sending through new leased line ( Static Public IP ).

View 2 Replies View Related

Home Network :: Setup A DC++ HUB For Sharing Data Within The University Local Network?

Feb 13, 2011

I want to setup a DC++ HUB for sharing data within the university local network. We have addresses of the form 172.31.*.*. These addressed are accessible within the university bu non routable outside on the internet. My plan is to setup a local HUB for DC++ for sharing data within the university intranet. So even if internet is unavailable data can be exchanged through LAN. This HUB must not be accessable outsied the university network.how should I do this all..implementing network sharing other than DC++. My basic idea is that everybody can share their data and the data is searchable from one common interface( Web interface is better option, if possible). And data featching should prefferably be from many hosts, using multiple connections so that speed can be improved..

View 4 Replies View Related

Home Network :: Add Printers To Local Wireless Network Without Sharing From Computer

Mar 3, 2012

I have a home network running all Mac computers (though can run Windows VM if necessary) and a pair of USB printers. The wireless router and cable modem are in one room, but the printers are in another. I'd like to find the most practical way to add the printers to the local wireless network without sharing them from a computer. I've tried that for a while, but don't want to leave a laptop connected 24/7 just to enable wireless printing (rather defeats the purpose of a portable computer). I don't have any wired network lines in the home, and am not excited by the idea of running any cables.

View 5 Replies View Related

Home Network :: Setup A Local Network Between The 3 Computers But Separated?

Jun 28, 2012

i'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?

View 6 Replies View Related

Home Network :: How To Use A Network Connection As A Local Host

Nov 1, 2012

There is a device which is connected to the PC via Lan. I have an exe file which is supposed to get connected to that device and perform some operations. However, the problem is, the exe file tries to connect to the local host ip address 127.0.0.1 and i cant change the ip since it's been coded.So, I'm wondering if i can use the device connection (which already has a different ip like 169....) as a local host connection. So whenever it tries to connect to the loopback 127... it automatically connects to the external device.

View 2 Replies View Related

Home Network :: Interfacing Local Area Network With LCD?

Mar 17, 2012

I am planning to deploy a "Digital Notice Board system" in my office, which gets feed from web server and display data/stream on LCD Screen. Well i am done with implementing all the interface on server side and its working pretty well with client side computer. But instead of using Client Side Computer, I just want to use LCD and make some network interface of Local Area Network directly with LCD (to save cost/installation/maintenance of a dedicated computer with LCD ).

View 1 Replies View Related

Home Network :: Cannot See Local Lan Shares Under Network Icon

Apr 4, 2013

i purchased vaio with win8. Under network icon, I can not see any other computers in the local network therefore not able to access shares unless i explicitly map the shares which is tedious.

On other computers running win7 and xp, each of them can see each other under network icon.However that is not the case with my laptop running 8. Actually i have seen once or twice all pc-s show up but most of the time, they dont appear.

I read somewhere that following service need to be checked to make sure they are running: upnp, ssdp in services. I checked those and they are all running.

I also enabled "turn on network discovery" under network and sharing->advanced sharing. setting. To make it more complicated there are private and public and all network setting. I enabled all items as follows:

1. Private Turn on network discovery is checked along with Turn on automatic setup of network connected devices Turn on file and printer sharing is selected Allow Windows to manage homegroup connections is selected.

2. Guest or public Turn on network discovery is selected Turn on file and printer sharing is selected.

With these settings I still dont see the local computers and their shares. Do I need to check anything else?

View 2 Replies View Related

How To Set Up A Local Area Network

Jan 26, 2011

i want to know how to set up a local area network

View 3 Replies View Related

Limited Or Local Network Only?

May 20, 2011

i,m having problems connecting my laptop to wifi at home to my sky router, have tried connecting at starbucks free wifi with success so sure its not the driver, reset laptop to factory settings and also reset router to original settings but still no joy followed all prompts from computer to rectify problem via internoh i,m running vista home an the laptop is the amilo Li 2727 fujitsu siemens.

View 2 Replies View Related

Wireless Network / Local Only

Jan 7, 2012

I have two laptops I am working on. The gentleman who owns the laptops recently got an air port router for his macs. Well, the two HPs that he has, both of their wireless cards stopped connecting to his network. Nor, will the connect to mine. If I connect it through Ethernet, the internet works great. If I connect it through wireless, local only every time.I have tried renewing the ip address. Disabled the IPv6. Uninstalled Norton in case it had a block on it. Disabled firewall temporarily. Uninstalled all Air Port files. I am absolutely boggled on what this guy could have done.

View 14 Replies View Related

Cannot Detect Local Network

Sep 18, 2011

when we hooked our computers into our lan swich, which is a 3com dual speed switch 8, all of our machines reported that there was local or no conectivity.according to ipconfig, we all had addresses of 169.254.xxx.xxx, so we manually set the ip addresses, and still nothing.finally, we reset the router, and still nothing?!

View 1 Replies View Related

Xbox On Local LAN Network And Isp Network?

Jan 24, 2011

Ive been using media center for a long time and love using xbox as a media center extenter. My new ISP does not have anyway to connect other then wireless but this is far to limited for mce. I would like to have my xbox use one network for the mce and the other for xbox live? is this possible? Would I be able to set up the media center on the other end this same way one media network for xbox, and also get internet for the media center online channels for example

View 1 Replies View Related

Unidentified Network And Local Connectivity

Jun 21, 2012

My wireless adaptor is preventing me from connecting to the internet at home, it enables to me o find the router and type in a password but only shows " unidentified network and local connectivity" with no access to the internet. When connecting via LAN, i am able to surf the internet. i have tried a full system restore, update drivers , enable and disable drivers but still nothing

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft� Windows Vista� Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Celeron(R) CPU 900 @ 2.20GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 1
RAM: 3032 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1292 Mb
Hard Drives: C: Total - 227472 MB, Free - 200337 MB; S: Total - 1499 MB, Free - 1440 MB;
Motherboard: Advent, Roma
Antivirus: None

View 10 Replies View Related

Unidentified Network Local Access Only?

Oct 29, 2012

I have going up the walls the last week.Basically just moved house and got broadband installed, my girlfriends laptop connected automatically, whereas my Compaq CQ60 Presario Notebook WindowsVista will not connectI have checked so many different forums trying to fix this problem, but to no avail im afraid... it looks like there is an excellent internet connection.... but cannot go on the internet because it says "Unidentified Network local access only"

View 6 Replies View Related

Can't Connect To Other Clients On Local Network?

Jan 17, 2012

I have a computer (client) and I have connected to gateway and internet but I'm not connected to other clients.

View 3 Replies View Related

How To Access Local Network Firewall

Apr 18, 2012

I want to Turn off my local network's firewall on my computer but i dont know how.

View 1 Replies View Related

Can't Find Local Area Network

May 21, 2012

Ok so my dell Inspron desktop has had many internet related issues before, but this time it can't find the local area connection. I have taken the Ethernet cord and plugged it into the laptop im posting on and it works just fine so it is a problem with the computer.

View 7 Replies View Related

Local Area Network Not Connecting?

Sep 1, 2012

I have just recently installed a new router for my home and the ethernet connection stopped showing up. It instead said "no connections available". I figured the onboard network adapter gave out because of the orange light it gave off and bought a NetGear GA311 network adapter. I installed it and updated it, but the connection still says there are none available.

View 7 Replies View Related

Add Two Printers Of Different Hp Series To The Same Local Network?

Jan 16, 2012

how can i add two printers of different hp series to the same local network ?

View 1 Replies View Related

Sony TV Only Has Local But Not Network Access

Dec 11, 2011

I tired connecting my Sony TV to the internet.It wouldn't connect automatically so I manually entered

IP Address 192.168.1.200
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
Primary DNS 192.168.1.1
Secondary DNS 0.0.0.0

When it tested that it only gave me local access but not internet access. What else can I do to fix this? I use a netgear router WPN824N.

View 3 Replies View Related

Wireless Network Shows Up As Local Only?

Sep 2, 2011

After Irene, we kept power and cable, but our internet went down, or so we thoughtWhen we plug the Ethernet cable from the modem into the computer, internet works fine (I can post this, after all), but when we plug the cable from the modem into our Dell TrueMobile 2300 router, our network appears as "Local Only." The phone cable thing is plugged from the wall into the modem, and the ethernet cable goes from the modem to the router, as it has been for years.

View 7 Replies View Related

Wireless Network With Local Access Only?

Nov 26, 2011

I just replaced my wireless router. Wh? Now I'm not sure, I hoped a dual band router would give me better range. True or false?Regardless, I installed my new router but can only connect to my local network on my home laptop. However my work laptop connects to the same network and internet with no problem. SO does my husband's work computer.Any idea what the problem is? Other weird thing is that I have some random unsecured network that keeps popping up and my computer keeps automatically connecting. I've tried to remove it every way possible and it keeps coming back?

View 1 Replies View Related

Connecting TV To Local Home Network

Nov 27, 2011

I just installed my new TV by Samsung UA55D6400. it's great. I understand that it can be connected to local home net. it has Wireless LAN Built-in BU no Wireless LAN Adapter Support. What I have to buy and install in order to connect it to the local net and also stream movies to it?

View 3 Replies View Related

Can't Access Website From Within Local Network?

May 7, 2012

I have recently set up a computer on my network to host a website.So i have done the basics and created a Dyndns account etc.Now I can view the website via this domain flyingant.dyndns.org/ on computers outside of the network and the pc that it is hosted on.But my problem is that I cannot view the website on any other computer on the network, it takes me to the routers login page.

View 2 Replies View Related

Connecting To A Local TCP / IP Network On Windows 7

Mar 5, 2012

We've had an old netbeui network set up for a while now but recently switched over to TCP/IP so my computer (running Windows 7 x64) could connect. The other computers on the network are running Windows 2000 and XP.All the older computers are working, but I still can't get mine to connect. It shows up as "Unidentified Network: Public Network"I really don't know where to go from here. I don't know if it should just pop up automatically or if I am supposed to configure it somehow.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved