Xbox On Local LAN Network And Isp Network?
Jan 24, 2011
Ive been using media center for a long time and love using xbox as a media center extenter. My new ISP does not have anyway to connect other then wireless but this is far to limited for mce. I would like to have my xbox use one network for the mce and the other for xbox live? is this possible? Would I be able to set up the media center on the other end this same way one media network for xbox, and also get internet for the media center online channels for example
View 1 Replies
ADVERTISEMENT
Feb 13, 2011
I want to setup a DC++ HUB for sharing data within the university local network. We have addresses of the form 172.31.*.*. These addressed are accessible within the university bu non routable outside on the internet. My plan is to setup a local HUB for DC++ for sharing data within the university intranet. So even if internet is unavailable data can be exchanged through LAN. This HUB must not be accessable outsied the university network.how should I do this all..implementing network sharing other than DC++. My basic idea is that everybody can share their data and the data is searchable from one common interface( Web interface is better option, if possible). And data featching should prefferably be from many hosts, using multiple connections so that speed can be improved..
View 4 Replies
View Related
Mar 3, 2012
I have a home network running all Mac computers (though can run Windows VM if necessary) and a pair of USB printers. The wireless router and cable modem are in one room, but the printers are in another. I'd like to find the most practical way to add the printers to the local wireless network without sharing them from a computer. I've tried that for a while, but don't want to leave a laptop connected 24/7 just to enable wireless printing (rather defeats the purpose of a portable computer). I don't have any wired network lines in the home, and am not excited by the idea of running any cables.
View 5 Replies
View Related
Jun 28, 2012
i'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?
View 6 Replies
View Related
Nov 1, 2012
There is a device which is connected to the PC via Lan. I have an exe file which is supposed to get connected to that device and perform some operations. However, the problem is, the exe file tries to connect to the local host ip address 127.0.0.1 and i cant change the ip since it's been coded.So, I'm wondering if i can use the device connection (which already has a different ip like 169....) as a local host connection. So whenever it tries to connect to the loopback 127... it automatically connects to the external device.
View 2 Replies
View Related
Mar 17, 2012
I am planning to deploy a "Digital Notice Board system" in my office, which gets feed from web server and display data/stream on LCD Screen. Well i am done with implementing all the interface on server side and its working pretty well with client side computer. But instead of using Client Side Computer, I just want to use LCD and make some network interface of Local Area Network directly with LCD (to save cost/installation/maintenance of a dedicated computer with LCD ).
View 1 Replies
View Related
Apr 4, 2013
i purchased vaio with win8. Under network icon, I can not see any other computers in the local network therefore not able to access shares unless i explicitly map the shares which is tedious.
On other computers running win7 and xp, each of them can see each other under network icon.However that is not the case with my laptop running 8. Actually i have seen once or twice all pc-s show up but most of the time, they dont appear.
I read somewhere that following service need to be checked to make sure they are running: upnp, ssdp in services. I checked those and they are all running.
I also enabled "turn on network discovery" under network and sharing->advanced sharing. setting. To make it more complicated there are private and public and all network setting. I enabled all items as follows:
1. Private Turn on network discovery is checked along with Turn on automatic setup of network connected devices Turn on file and printer sharing is selected Allow Windows to manage homegroup connections is selected.
2. Guest or public Turn on network discovery is selected Turn on file and printer sharing is selected.
With these settings I still dont see the local computers and their shares. Do I need to check anything else?
View 2 Replies
View Related
Mar 9, 2013
can u use any wireless network adapter for the xbox360?
View 1 Replies
View Related
Oct 29, 2012
so my son has been playing xbox for way to long and i am trying to get him to go outside. i want to block the xbox from the network so it disconnects him when he goes on for to long. is there any program that i can use to do this so i dont have to manually take the Ethernet wire from his room every time.
View 3 Replies
View Related
Jun 18, 2012
my xbox 360 can't connect to my network what do i do?
View 1 Replies
View Related
May 21, 2012
Cant see my network connections,cant add my xbo..
View 1 Replies
View Related
Jul 14, 2011
My PC is wireless connected to my modem, My X-Box is wired to my modem, PC detects x-box in home network, X-Box doesn't see PC when running connection test, X-Box however does connect to web. When I plug in an Ethernet Cable from my Modem to my PC the X-Box instantly detects my PC. I can't figure out how to make my x-box communicate with my PC when it's it's half wireless / half wired.
View 1 Replies
View Related
Aug 25, 2011
I'm trying to connect an Xbox 360 to my University's wireless network using a bridged connection between the wireless adapter and the LAN adapter. I can connect to the internet on the Xbox, but not Xbox LIVE. I get an error message stating that my MTU setting must be 1364 or higher. I obviously cannot access the router settings because they are the schools routers and I do not have administrative privileges. So, Is there some other way to modify MTU settings without that access?
View 3 Replies
View Related
Dec 8, 2012
My Xbox can't connect to my network yet my dad's and step bros ps3 connects fine, and all the laptops in the house too
View 1 Replies
View Related
Feb 3, 2011
Xbox connects to the network but not the internet what should i do?
View 4 Replies
View Related
Aug 12, 2011
i have a little network knowledge but the tp-link wa-500g is proving quite a challenge to set up.i am trying to set it up in client mode to use with the xbox 360.thhe problem is i seem to set everything up correctly but it doesnt actually seem to work or to connect to the main router..which is a sky sagemfast router...(could this maybe be the problem? and if so how could i sort this? i have set a static ip on the tp.link and set up in client mode and "supposedly" connected to the main router in which is hard to figure out if it has or hasnt...also my sky router has wpa security and i am wondering if something has to be configured in my tp-link wa-500g to connect? but i can find no information on this needing to be done.
View 3 Replies
View Related
Jan 29, 2011
I just upgraded my wireless router to a D-Link DIR-655. I have 2 PCs and a network storage device (D-Link DNS 321) connected via ethernet to the router. I also have an xBox 360 connected wirelessly to the router. The xBox is able to connect to the internet via the router, but it cannot connect to (see) the PC's or the network storage device. It was able to do so with my old wireless router (a Belkin), but it stopped with the DIR-655.
View 4 Replies
View Related
Dec 12, 2012
I'm having trouble connecting my 360 to the wireless router to gain Internet access.I use my phone's Wi-Fi to gain internet access with NO issues. My current setup: NetGear Wireless router is connected to my D-Link wired router, and I can access the internet no problem. (10 MBPS down, 5MBPS up)When I try to connect the 360 to the Netgear Wireless router, it connects to the Network, but Internet test it reads "DNS error - The router or modem may mot be automatically providing DNS settings. Try a manual DNS setting instead."(Next suggestion) "DNS Error - If you have a PC that can successfully browse the web, check it's network properties to find the DNS address it uses..."Now, I have XBMC running on my computer, and the 360 can access the network so it shows up under Video Apps so I can see a file list to stream movies. When I try to run a movie, it says I must download an update - so I can't watch the movies at all.I juso set it up so I can access the Network AND Internet.Again, Netgear wireless router (which 360 connects to) connected to D-Link wired router.
View 10 Replies
View Related
Mar 9, 2011
I'm sure it's on here but because I dont understand the name of what I'm looking for, I'm having trouble searching. My main network is setup for wireless via a netgear wndr3700. I'd like to use my old linksys wrt54g v5 to connect to that network wirelessly and allow me to connect my xbox via wired ethernet. Basically instead of buying a wireless adapter for the xbox, i'd like to know if/ how i can use my linksys router instead.
View 13 Replies
View Related
Nov 29, 2011
Yesterday i was playing online on my Xbox 360, and was disconnected from the internet. I came downstairs to reset router/modem, once doing so i went into the router settings for my Linksys WRT54G. My modem by default uses the 192.168.1.1, so my router was 192.168.2.1... So i powercycle, log into router settings through 192.168.2.1 and start setting up my port forwarding for the xbox ports. Saved Settings, and the page would not load to say "Settings Saved". Closed the window and now my pc says no internet connection. I had to create a VPN broadband connection to even use the internet on my pc. I can no longer log into 192.168.2.1 for my router, nor can i access 192.168.1.1 to even get into my modem settings.. I'm using windows 7, and the automatic troubleshooting guide tells me to powercycle my modem. My xbox can still see my wireless network "linksys" but will not connect to it, even with the VPN connection i am still hooked though my router and modem.. Im afraid that my router just out of nowhere "died"..
View 2 Replies
View Related
Nov 28, 2012
So i got the Asus RT-AC66U router and ive setup everything as far as the 2.4 and 5ghz wireless goes. However, for some reason i cannot get my xbox 360 to connect to the wireless network. I tried both the 2.4 and 5ghz network. It sees the network just wont connect. also ive tried to manually add the ip and dns settings to no avail either
View 11 Replies
View Related
Jan 21, 2012
recently I've connected to my OpenVPN and everything works fine on my PC I'm getting okay speeds and the VPN IP appears on [URL]The problem is I wanna use internet connection sharing to play Xbox Live while connected through my VPN and I'm having issues.My Xbox isn't even recognizing my wired connection.This is the setup:Wireless Connection > Desktop > OpenVPN > Wired connection from desktop to XboxWhat I think I'm doing wrong is not specifying the correct home networking connection for my LAN 3 (Tap-Win32 Adapter OAS)I tried sharing the LAN 3 connection and set the home networking connection to my Wireless and it disconnects me from my wireless network.
View 1 Replies
View Related
May 24, 2012
My network is discoverable, but my machines will not connect (they were connected previously). They can connect to the 2.4gHz network, but not the 5 (I use the 5 for streaming media and gameplay). Windows 7 says it's unable to connect.
View 8 Replies
View Related
Nov 29, 2007
I have a xbox 360 that I want to connect to xbox live with, using my home network. Every time I try to connect to xbox live the only part that fails is the connecting to xbox live part. This is how my network is set up. I have Cox Cable as my ISP, a Linksys WCG200 gateway(v2), and WRT54GS(v7). The cable wire is connected to the WCG200 gateway, then an Ethernet cable connects the gateway to the WRT54GS router, and finally an Ethernet cable connects the router to my xbox 360. I have contacted Cox, Linksys, and Microsoft about the situation and they all say the problem is the version of the router. Someone told me that I may just need to change the firmware, but I don't know how to do that.
View 9 Replies
View Related
Jan 26, 2011
i want to know how to set up a local area network
View 3 Replies
View Related
May 20, 2011
i,m having problems connecting my laptop to wifi at home to my sky router, have tried connecting at starbucks free wifi with success so sure its not the driver, reset laptop to factory settings and also reset router to original settings but still no joy followed all prompts from computer to rectify problem via internoh i,m running vista home an the laptop is the amilo Li 2727 fujitsu siemens.
View 2 Replies
View Related
Jan 7, 2012
I have two laptops I am working on. The gentleman who owns the laptops recently got an air port router for his macs. Well, the two HPs that he has, both of their wireless cards stopped connecting to his network. Nor, will the connect to mine. If I connect it through Ethernet, the internet works great. If I connect it through wireless, local only every time.I have tried renewing the ip address. Disabled the IPv6. Uninstalled Norton in case it had a block on it. Disabled firewall temporarily. Uninstalled all Air Port files. I am absolutely boggled on what this guy could have done.
View 14 Replies
View Related
Sep 18, 2011
when we hooked our computers into our lan swich, which is a 3com dual speed switch 8, all of our machines reported that there was local or no conectivity.according to ipconfig, we all had addresses of 169.254.xxx.xxx, so we manually set the ip addresses, and still nothing.finally, we reset the router, and still nothing?!
View 1 Replies
View Related
Jun 21, 2012
My wireless adaptor is preventing me from connecting to the internet at home, it enables to me o find the router and type in a password but only shows " unidentified network and local connectivity" with no access to the internet. When connecting via LAN, i am able to surf the internet. i have tried a full system restore, update drivers , enable and disable drivers but still nothing
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft� Windows Vista� Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Celeron(R) CPU 900 @ 2.20GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 1
RAM: 3032 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1292 Mb
Hard Drives: C: Total - 227472 MB, Free - 200337 MB; S: Total - 1499 MB, Free - 1440 MB;
Motherboard: Advent, Roma
Antivirus: None
View 10 Replies
View Related
Oct 29, 2012
I have going up the walls the last week.Basically just moved house and got broadband installed, my girlfriends laptop connected automatically, whereas my Compaq CQ60 Presario Notebook WindowsVista will not connectI have checked so many different forums trying to fix this problem, but to no avail im afraid... it looks like there is an excellent internet connection.... but cannot go on the internet because it says "Unidentified Network local access only"
View 6 Replies
View Related
Jan 17, 2012
I have a computer (client) and I have connected to gateway and internet but I'm not connected to other clients.
View 3 Replies
View Related
Jul 4, 2012
check the traffic produced by different hosts in a local network. In other words: which hosts uses how much of the bitrate.For example: We have a wifi network with four computers connected to. Lets say one is running skype, one is surfing in the internet and both left are just in idle mode. Is there a way to monitor the use of our bitrate such that I could see:"Ahh IP 10 is using 80%, IP 11 is using 10% and IP 12 and 13 are using 5% each on average!"
View 3 Replies
View Related
Apr 18, 2012
I want to Turn off my local network's firewall on my computer but i dont know how.
View 1 Replies
View Related
