i have the 4G internet from verizonwireless and its in the form of a usb. I can move it from computer to computer and have the internet on any computer i chose but say if wanted to be on the internet on two different computers at the same time with that same usb. can that be done? Can i leave the usb on one computer and some how get a router or anything to spread the signal in order words so the other labtop can pick it up?
View 1 Replies
I am with Virgin media (UK) and have the 20mbps fiber optic connection. My area has recently been having problems with the broadband and Virgin has recently fixed these problems. However I used to get around 19mbps now that the problem is fixed my computer which is wired to the router gets about 0.4mbps downstream... However the 5 wireless computers all get 16mbps which is pretty good for them. Windows tells me that its a firewall issue and I currently can't use two programs, spotify and steam. They both have firewall issues, even if I turn off my firewall which is the windows one. I also have avast, and when I turn that off, still no good. I used OpenDNS, stopped using that flushed my DNS, that didnt work. I tried to optimize my computer settings, by changing various values in Regedit.All of this has done nothing. I should add that I have recently re-installed Windows 7 so on this fresh install it has never had decent internet speed. Which I thought was weird.. I have basically had these problems since the fresh install. All of my drivers are up to date.
View 10 Replies View RelatedI have a HP pavilion p6736f-b. It has wireless capability. It has wireless lan 802.11b/g/n. I know personal it can connect to the internet because I have done it before. Now when i try to connect to the internet it shows that no networks are available. This problems goes away when I use my wireless adapter and it can find my network name fine and I can connect to the internet. I want to be able to use my computer wireless without any usbs since it goes faster and I also use plenty of usb so I dont have the ability to always use a usb for my wireless adapter. I think the problem might be connected to me connecting my xbox 360 manually setting the ip address default gateway etc.
View 13 Replies View RelatedMy computer sees the wireless modem, and i have signal. But when i open up internet explorer will not connect.
View 1 Replies View RelatedI have a Toshiba note book and I can't on get on the Internet, I have a red x over my wireless icon
View 2 Replies View RelatedMy internet connection goes off when computer is shut down
View 1 Replies View RelatedSo I have a wireless router downstairs in my house that usually reaches around the whole house. However as of a couple days ago, whenever I am upstairs I only get limited connectivity. It still detects my router, but I an exclamation point and I can't connect to the internet. However when I am downstairs I have a connection that actually works. This applies to multiple laptops, computers, phones, etc.
View 1 Replies View RelatedIt should be known that this is not MY specific issue, it's a friend's issue... but I am posting it for him as I know nothing about networking. Don't worry though, anything you post here I will relay for him to do.Is this a wired or wireless connection issue?
Wireless
How to run and post an ipconfig /all output of the computer(s) in question for review.Here it is:
Quote:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>
C:Windowssystem32>ipconfig/all[code]....
So here's the deal, my friend has horrible down speed, usually less than 1MB/s according to Speedtest.net, sometimes it hits 2MB/s. However, his brother's in the house have at least 17MB/s, which I can assume is their actual speed that my friend should have... however, he specifically does not.He had a very old wireless card that was installed on his motherboard (desktop PC) that I assumed was the issue upon him first telling me, and from the issues I was personally able to see. For example, he'd constantly disconnect... his internet would just die for him specifically, and then come back. His brother's never lost internet when he did.
After that, I figured his very old wireless card that was installed was just kicking the bucket, so I instructed him to replace it. He went out and bought a new wireless USB adapter, and then uninstalled the network card.Even after all of this, his internet is still poor in terms of down speed. HOWEVER, rather than his internet dying for a few minutes at a time every so often, his internet "stays connected" if that makes sense? For example, we'll be on Skype in a conference call, and his internet will be loading pages very slowly, and Skype will constantly show that it's going from "green - online" to "gray circle - connecting". During this, he's still in Skype, but it's very poor quality from him speaking, and laggy as well.
We are trying to get laptop to connect to our wireless. She has entered the network key and the icon says she is connected with a excellent connection, however, we cannot connect to the internet. The other challenge is that everything is in Spanish.
View 9 Replies View RelatedSo my old dell computer cannot connect to wireless internet, so it is connected to a Netgear internet bridge box. The other bridge box is in the basement where it is connect to the modem. I believe the location of the other box is almost directly below were my computer stand (and bridge box) used to be.I recently I moved it to different corner of my house that is about 15 feet further than the previous location. Now the wired internet speed is almost unbearable and inconsistent. The wireless speed is the same, but wired is really bad. I believe it is because the bridge boxes are further away from each other.I've tried unplugging and replugging, resetting, and etc.I would really like to know how I can fix this without moving the computer back since the furniture is in a really nice place and the computer would ruin the look.
View 5 Replies View Relatedi have a desktop computer and we have wireless internet how do i get that desktop to get wireless using a router to router connection?
View 1 Replies View RelatedI have tried everything I can think of but since purchasing my 615-N router from DLink, I haven't been able to get online via wireless internet from another computer in this apartment. The router seems to be working fine - I have a LAN connection through it to this computer I'm on now and the PS3 hooked up to the wireless signal just fine. It is the one desktop computer though. The only thing I can think of is that I am using an old g adapter. I didn't think this would matter because the N router can supposedly communicate with g and b devices.
View 3 Replies View Relatedi have problem with internet notconnected router
View 1 Replies View Relatedaptop ,i just buy wireless netgear router for wireless net range but it does not work .its saw me the router acess point but some how my internet not connecting . its connecting with linsys but not with my router. its something which i can do ? am thinking of security system on the netgear properties
View 1 Replies View Relatedwhy my computer cannot connect to wifi but can only connect to ethernet and broadband only?
View 2 Replies View RelatedI'm trying to add an IPAd to my wireless wifi connection..How can this be done. I called my internet service and they told me I needed a PASSWORD from you cause I own your router.
View 2 Replies View RelatedI want to connect to the internet with a wireless connection on a new computer. When I connect I am asked the security code that I do not know where to look.
View 1 Replies View Relatedi went to device manager and looked at the network devices and there is a yellow sign with a ! in it next t broadcom 801.11n network adapter and under that there is realtek RTL8168C(P)/8111C(P), but is fine i think.
View 1 Replies View RelatedHave two other computers that connect with ease to the Netgear wireless router, but the new computer will not access the internet. I have been searching for answers and have tried about everything I can find nuder similar posts, but I still have not internet access. At varying times, I have had "internet access", but no actual ability to load websites. Right now, I do not even have access. I am at a loss.Even at my low level of experience, I am usually able to tinker until I fix the problem, but I am about four hours in and currently seem to have taken a step backward. I cannot even begin to explain what things I have already tried
View 9 Replies View RelatedI am having trouble keeping my computer connected to the internet...even though it says my signal strength from my wireless internet is excellent. every time i get online i put in my url and it loads the page but if i click on anything on that page it asks me to connect again even though my computer says im still connected.
View 1 Replies View RelatedI have a Cisco E1200, I am wanting it to connect to the net using Etisalat ISP. The computer will talk to the router and all the settings look correct but it will not connect to the internet.The router did a software upgrade that it deemed successful.
View 9 Replies View RelatedSet up wireless internet with this computer. After going through set up wizard my computer would not fully connect to wireless. It is connected to the network but the internet does not go through. When diagnosing the problem windows says "A problem with your network router or broadband modem might be preventing an internet connection. My husbands computer and phone have no problem connecting. My computer says the wireless network adapter is working properly and I seem to have no trouble connecting to other wireless connections.
View 4 Replies View RelatedI am unable to connect to the internet with my XP computer. I am running Apple Air Port as my router. The wireless network has an iMac, an IBM Think Pad(XP SP2)and a Dell XPS 410 (XP SP2). I am using WPA security and the Dell will not connect while the other two computers always connect. My wireless network is broadcasting, but when I try to connect after entering the proper key, it attempts to connect but appears to time out and displays the available wireless network. I tried reinstalling the drivers, but no success. Device Manager says the card is working and enabled.
View 5 Replies View RelatedI installed an E1200 wireless router yesterday and everything worked fine. However, I happened to turn off the modem overnight and now my computer indicates (under Wireless Network Connection) that I'm connected, but above (under Currently Connected To) it says that I have No Internet Access. I tried turning off the modem, router and computer and turning them on again in that order, but that didn't work. Do I need to do the set-up again ?
View 5 Replies View RelatedRegion : UnitedStates
Model : TL-WR841N
Hardware Version : V8
ISP : ATT
I get this new router TL-WR841N from amazon.com, I get no signal/internet connection on my computer when I install/connect the router using the installation min CD (same procedure at listed here: url...The DSL connection is good, since I get internet connection when I connect my modem directly (without the router) to my computer. My modem is the old Siemens SpeedStream 4100 with IP Address of 192.168.0.1 from ATT.Is my router deficit ?
computer suddenly would not acquire internet wired or wireless while at university. Local techies tried to fix but no luck. I'm trying to fix this but nothing has worked yet. Seems to be a problem aquiring an ip address. I've matched all the settings from my other dell laptop which connects no problem.
View 29 Replies View RelatedI have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information
IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :
My WRT54G2 v1 does not automatically connect to the internet on computer start-up. The computer will say "Connected, No Internet Access" In order to fix it I have to unplug the router and then plug it back in. This happens to any computer that tries to get online from a cold start-up. The router must always be unplugged, then plugged back in, then it will have internet access (and will generally maintain it throughout the session and even if the computer is restarted, i.e. warm boot). I have downloaded the latest firmware uprade.
View 9 Replies View RelatedRegion : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225
ISP : Rogers
Ever since upgrading my firmware from 120426 to the latest(121225), one of my computer(windows xp, TP-link Nano) is frequently losing internet connectivity.I purchased the router a month ago and firmware 120426 was the version that came installed. The router would stop working about 3-4 times a week, requiring me to reboot it. Because of this I did some research online and found out about version 121225 which supposedly should improve performance and stability. After the firmware upgrade today I noticed that one of my computer is having a lot of trouble maintaining internet connectivity for more than 30 minutes. When checking wireless connectivity it would say that I am connected and that the signal strength is excellent. I'm also able to ping 8.8.8.8 but not www.google.com(I've tried ipconfig /flushdns and it doesn't solve the problem). I also have trouble accessing or pinging the router(192.168.0.1) with this computer.
I have a netgear router, the pc I want to print from is connected via ethernet strait to router with Vista Ultimate OS. The computer the printer is hooked up to is connected via usb wireless adapter with Windows XP OS. Can I print from my computer hooked up via Ethernet from the computer that is hooked up wireless.
View 4 Replies View Relatedwhen i try to log on to google chrom...it states not connect to the network...at thr bottom of the computer it say noy connected connection avaiable
View 1 Replies View RelatedWhen I look at the "network and sharing" page it saying that I'm connected same goes for the "Wireless Network Connection Status" page (which says "internet" in the "IPv4 connectivity" and "no internet access" in the "IPv6 connectivity"). But when the computer has to update It'll say "no internet access" and when i go on Internet Explorer it won't say anything instead the green loading bar on the bottom of the page will be stuck in the middle.
View 2 Replies View Relatedhow to sending out the wireless network from computer A to computer B if we used a lan network to computer A
View 12 Replies View Related
