I installed a CISCO ASA5505 with 50 user license to my network as the gateway firewall. So ASA is acting as the gaeway router which is connected to a fibre circuit and also it gives DHCP to the network. The strange thing is that except for two computers rest does not have internet. I also have an asterisk phone system which works fine..
I tried everything.... static IP's DHCP, DNS nothing worked. But strange enough two computers works fine and have internet.. but are no special computers. One is Win XP and the other one is Win7. When I troubleshoot the problem in win 7 on one of the computers it says
"The remote device or resource won't accept the connection"
I cannot connect to the internet when I try it says "The remote device or resource wont accept the connection" It has been doing this for about 8 days... Sometimes It will connect the Internet explorer... But the past 2 days I CANNOT!
Computer was running fine, then I lost internet connection, ran troubleshooting report, it says the remote device or resource wont accept the connection. Nortons antivirus expired a week ago, tried to resubscribe in case i had a virus, but cant subscribe cause it wont pick up wireless. Have the broadband plugged straight into laptop and still nothing?
I get this message in response to clicking on "Diagnose Connection Problems" which was returned to me in I.E. 9 after visiting yahoo.com, other sites and most interestingly, even after trying to get to my DIR-825 at IP address 220.127.116.11. The only common element here is the DIR-825 so I suspect there may be some kind of misconfiguration in the device. The only way that I have been able to clear this condition is to reboot or repower my DIR-825.
I have had clearwire for a few years, about 2 months ago the internet started being weird. It would go slow, only load part of a page or disconnect completely. Now I cant get on at all. Not with my HP laptop, not with my daughters iPad, my husbands HP, ipod and not even if I hook up directly to the router. I have gone through 3 modems and 2 routers trying to fix this, but nothing has changed. When I run a trouble shooter, under "Problems Found", it says, "Windows cannot communicate with the device or resource. (primary DNS server)" I am currently on my computer at another location, every device we have, can get on the internet at other locations.
I am trying to set up my computer with my old connection. I use my laptop (acer aspire 5742ZG) and before I moved out it worked like it should have. Then while in the other town I needed to set up my connection, this time by myself (through some sort of interface in 192.168.1.1). Now that I'm back next thing happens: I appear to be online, I am online on skype (can chat, and people chat back) but when it comes to connecting to the internet through the browser or an online game I play it's not responding, as if there is a problem.I use windows 7, so the troubleshooting software reports what's in the title.The problem is not with the connection - 3 computers are connected to it, 2 with cable, 1 wireless. I would use wireless too, but I am too far away from the modem (it's in another house, and I have a long cable which works, posting from the desktop computer connected to it). [Code]
I have a ASUS NB K52f/k62f series, 3GBRAM intl Pentium CPU2.13GHz 500GB HD 392GB free, windows 7 home premium 64bit. wireless network connection: Atheros AR9285 Wireless Network Adapter
I am able to connect to the internet via Ethernet but I cannot connect via wifi. Its been work fine for 3years now but now its not able to connect to any network and all my other devices are able to connect just fine to these networks fine. The error message I get is Windows can't communicate with the device or resource (primary DNS server). so far I have disable and re enabled the wireless connection, reset the TCP/IP, went through properties of ipv4 and 6 and set them to obtain an ip address automatically, and system restore from when I was able to connect via wifi still not luck
Problems have arisen since purchasing a new laptop with Windows 7. The problem seems erratic. The laptop connects to file servers on the network, but often cannot connect to the network. If it connects, often connection is lost when clicking to a new page.Usual error message: "Windows can't communicate with the device or resource (primary DNS server)"Network map shows communication lost between ADSL and network.Direct Hard wire connection to internet through ADSL works without issue. Hardwire connection through DIR-655 same as wireless: erratic, error messages. This message posted from another wireless router, specifics not known, connected without issue, on-line for 3 hours without problems.
-IP address: no difference between using automatically obtained or assigned IP address
-DNS server: no difference between using automatically obtained or assigned IP address
Router setup numerous times using CD ROM set up program.Firmware updated to the most recent version.Gone to tech support several times; can get the PC to connect and once done, tech support says its working only to disconnect within a few minutes.What must I do to get this DIR-655 router working on a regular basis?
Is it possible to configure a Westell 6200 DSL modem to accept access via a remote PC? I have a security camera that can be viewed via remote computer access, but I cannot configure my modem to accept a remote access.
When I plug in the power cord to my EA6500 all the LED's on the back, and the white Cisco on the front come on solid, then the lights on the back go out and the white Cisco light starts blinking faster than every second. I can't get it to stop blinking no matter what I've tried so far.
It won't let me connect to it at all. I've tried everything I can think of, and have tried almost everything I could find in Troubleshooting in Cisco Community. The Linksys Smart Wi Fi Router setup says "We could not find your router."
I've also tried using the red Reset button and the light never stops flashing. I've tried pushing the button quickly, holding it down for ten seconds, and holding it down for more than 30 seconds, but the light continues to blink. I've also unplugged it and waited more than 10 seconds, but nothing seems to work.
I have a new iPad and a new WAG160N. I've wasted many hours trying to get them to recognize each other, with no success.I can connect to the Internet OK but I can't get a connection to the Pad, as it won't accept my password. I can't find a solution here that I can follow for this model.Why won't my password (no unusual symbols, just 10 letters and numbers) be accepted?
I'm running a Winsock server on my machine, and I want to be able to connect a client (on an external/remote) network. I know that there are two IP addresses: The WAN IP which is what your IP address looks like while connecting to the internet. There is also an IP address assigned to you by your router. If both machines are on the same network, then I am able to make the client connect to the server by providing the Router-IP. But when they are on different networks, they do not connect even when i give the WAN IP. How exactly do I specify an address for a remote device ?
Region : Argentina Model : TL-WR740N Hardware Version : V1 Firmware Version : ISP :
Region : UnitedKingdom Model : TL-WR740N Hardware Version : V1 Firmware Version : ISP :
Am trying to use a TP-Link TL-WR702N to connect my Samsung SmartTV to a wireless network, using "client mode".For some reason, the TV refuses to accept it is connected, or even connected to a router. Enabling DHCP on the TP-Link does seem to convince the TV that it is connected to a router, but still not to the internet. Strangely though, I can control the TV via the Android app operating on the local network, so clearly it is connected. I assume the SmartTV is trying to get a response on the local network that the TP-Link is filtering out for some reason, but no idea why.
On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.
I have a few servers and resources on my local network. A Web server,a game server, a ventrilo server, a few ip cameras with web interface, an IR to IP bridge (web interface),a VPN, a few routers throughout the house, etc. I've been wondering how to get access to those devices from the web, in particular to be able to access the web interface of those devices. VPN access is excluded,I want to do it from a browser.Right now my setup is pretty simple: I have a domain name,and my router is set to forward a :80 request to my web server.Same for the VPN and game serves,at their respective ports.However, I need to be able to access the other web interface,and since I cannot assign an external port to each device in the router table and add the port number at the end of my domain name (not possible of course), I need to find a way to access these other web interfaces.I was thinking of setting a webpage on the web server which lists all resources and their links,but I am not sure if it is possible.For example,I create an admin page on my server asking for a login.Once logged in,a webpage appears displaying IPCam1 for example.Clicking on this link would forward to the local ressource,in this case 192.168.x.x:99 (the address of the cam web server)however,I do not know HTML and I am not even sure it is possible.
I have a network with aprox 150 workstations (90% windows XP profesional, 10% Windows7 32 or 64 bit), and I receive from time to time this message ONLY on windows XP workstations:" Workgroup is not accessible.You might not have permission to use this network resource" All the time I could access the various workgroup computers by entering their IP like \192.168.1.5 or \mikepc All the time i can ping any of the workstation without any problem.All the time using Search computers on the network I find computer name.
We have a Windows 7 machine and two Windows XP machines. We use windows sharing of resources over a cisco wireless network. Sharing works fine on all computers for files and printers, however the DVD/CD Rom drives are not accessible.Sharing is enabled on all of these devices.When we try to access these DVD/CD Rom drives we get the following error message:Windows cannot access //computer name/resource name.You do not have permission to access //computer name/resource name. Contact your network administrator to request access.
I have two production contexts on an ACE 4710 running A5(2.2). Both are members of a resource class that has "limit-resource all minimum 40.00 maximum equal-to-min". I am seeing many denied packets for Bandwidth throughput under the "show resource use" for one of the contexts. All other resource peaks under "show resource use" are well within range. So I'd like to create a new Resource Class for this context with bandwidth throughput packets being denied, and would solely like to allocate more resources for bandwidth throughput ONLY, while keeping the other resources at 40.00. However, "limit-resource ?" doesn't list any resources that look like bandwidth throughput. If I configure "limit-resource all minimum 50.00 max equal-to-min" then I do see it allocates more bandwidth for throughput via the "show resource usage" underneatht the Alocation - Max column. Is this the only method to effect the resource allocation for bandwidth throughput for a context?
i am looking for alternatives to Windows System Resource Manager, as we do not have Datacenter or Enterprise editions of 2003, or 2008/R2 terminal servers. The main problem we have is when a user tanks the entire server with Excel in a workbook that would be more appropriate as an Access SQL database rather than being in Excel.
I'm attempting to configure an for both site-to-site and remote access VPNs. The site-to-site is working fine, however when I connect using the Cisco client, after initial connection and password prompt I get a "not connected" status. The log states that a policy map match could not be found. I have successfully set the unit up for remote access with no site-to-site and ran into another host of issues when adding the site-to-site to the working remote access config, so I started over setting up site-to-site first. I've attempted this through ADSM (hate it) - the current configuration is via CLI. I'm certain I'm just missing a piece or two.
I am having hard time in understanding the hardware port channel resource concept in Nexus 5Ks. Which scenario is considered as a hardware port channel and which is not. According to Cisco documentation, 5548UP switch with layer 3 daughter card only supports 8 hardware port channels, does this mean we can connect only 8 dual homed Fex to those 5Ks.Will a dual homed fex consumes a hardware port channel?