Connect A Steaming Device To Wireless Network But It Will Not Accept The Password
Dec 22, 2012I am trying to connect a steaming device to my wireless network but it will not accept the password
View 1 RepliesI am trying to connect a steaming device to my wireless network but it will not accept the password
View 1 RepliesI just upgraded to the EA4500 for added range, etc. I'd like to let TiVo have the 5g side and use the 2.4g side for everything else. How can I even tell which band TiVo is using?
I tried setting TiVo up manually but it won't accept the password/key for the 5g band. I gave up and used the "push button" method, but I have a feeling that puts it on the 2.4g band.I do have two different SSIDs and two different passwords.
I'm having a problem connecting with wireless card model number f9L1101v1 to a router model number F5D7234-4. the computer is dell dimensions 4400 desktop pc running windows xp, everything seems to be working correctly. i can see my wireless connection, signal strength is full, but when i enter the network key which i have confirmed is correct it will not connect. it goes to the window where it shows it trying to connect but after about 2 minutes the window disappears with no explanation for connection failure.the network key was confirmed through a laptop that runs on the same router.
View 2 Replies View RelatedI cannot connect to the internet when I try it says "The remote device or resource wont accept the connection" It has been doing this for about 8 days... Sometimes It will connect the Internet explorer... But the past 2 days I CANNOT!
View 1 Replies View RelatedI changed my E1000 router name successfully, and then went into the Administration section to change my password. After changing the password and clicking on Save a small screen pops up asking me to verify my router's username and password. When I enter the exact same user name and password it does not accept them. When I try to enter the old user name and password it does not accept them either. I then try combinations of the two and it still will not accept the input. I have reset my router 4 times now and this keeps occurring. I am completely baffled.
View 6 Replies View RelatedComputer was running fine, then I lost internet connection, ran troubleshooting report, it says the remote device or resource wont accept the connection. Nortons antivirus expired a week ago, tried to resubscribe in case i had a virus, but cant subscribe cause it wont pick up wireless. Have the broadband plugged straight into laptop and still nothing?
View 1 Replies View Relatedproblems found says remote device or resource wont accept the connection
View 1 Replies View RelatedI get this message in response to clicking on "Diagnose Connection Problems" which was returned to me in I.E. 9 after visiting yahoo.com, other sites and most interestingly, even after trying to get to my DIR-825 at IP address 192.68.0.1. The only common element here is the DIR-825 so I suspect there may be some kind of misconfiguration in the device. The only way that I have been able to clear this condition is to reboot or repower my DIR-825.
View 7 Replies View RelatedSince Monday, when I have tried to access my emails in Outlook, a box pops up saying Enter Network Password The box is already prepopulated, with Server: pop3.live.com User name: my email address and a password that shows up as a bunch of stars.
Clicking on "ok" or "cancel" just causes the box to pop up again. (I can still access my emails on Hotmail, BTW, and all internet is working fine). I access the web through Qwest/Century link and MSN.
I am hesitant to delete the password 'cause who knows what it is?? It is NOT my Windows Live/Live Mesh password, as it has one too many stars. But the box came up prepopulated so I assume at some point this was the correct password.
In the past when this happened, you could call Qwest/Century Link and they would walk me through (as best as I remember) redoing all the pop 3 settings. Now, they say they "don't support" MSN.
I can't be the only one who misplaced their Router's Password - How do I manage to 'connect' my new devices (Kindle Fire and new smart phone) to my router installed less than 2 years ago.
View 1 Replies View RelatedHow can I setup the WLC to accept authentication based on the device itself and not a user?
View 7 Replies View RelatedI installed a CISCO ASA5505 with 50 user license to my network as the gateway firewall. So ASA is acting as the gaeway router which is connected to a fibre circuit and also it gives DHCP to the network. The strange thing is that except for two computers rest does not have internet. I also have an asterisk phone system which works fine..
I tried everything.... static IP's DHCP, DNS nothing worked. But strange enough two computers works fine and have internet.. but are no special computers. One is Win XP and the other one is Win7. When I troubleshoot the problem in win 7 on one of the computers it says
"The remote device or resource won't accept the connection"
I can't get access to my router. Won't accept admin password or 1234 .
View 3 Replies View RelatedI set up the WAP610N as a wireless access point, and it refuses to accept the passsword on several iphones (2 iphone4s and one iphone5) and a kindle fire.
The devices are picking up the network, but when the password is entered, the access point refuses the password. I've checked the password numerous times and the spelling is correct.
If the access point's settings are set to no security, there's an instant connection, which I expected, but the password is refused on either of the secure settings.
I bought the WAP610N for my son months ago, but he couldn't get it installed in his old apartment several states away because he doesn't have a CD drive in his computer. Now that he's moved into an apartment close to home, I was able to set it up using my computer. So I don't know if maybe it's a firmware issue since it sat in the box for months, or something else.
The access point is hooked up through a TP-Link TL-R860 Cable/DSL Router., which is not wireless.
I have a new iPad and a new WAG160N. I've wasted many hours trying to get them to recognize each other, with no success.I can connect to the Internet OK but I can't get a connection to the Pad, as it won't accept my password. I can't find a solution here that I can follow for this model.Why won't my password (no unusual symbols, just 10 letters and numbers) be accepted?
View 9 Replies View RelatedMy F9K1106 range extender (brand new out of the box) will not connect to my router. I have an ASUS RT-N66U router. The Belkin extender keeps telling me the password to the router (WPA2 security) is incorrect. Every other device (bridges, computers, tablets, mobile phones) connects to the router perfectly with the given password.
View 7 Replies View RelatedI recently upgraded my wireless router from D-Link DIR-615 to D-Link DIR-685. Before the changeover, all of my devices were connecting to the router, although I had several problems with dropped connections, etc. The devices in use were:
- Desktop computer
- Laptop computer
- All-in-one touchscreen computer
- Netbook
- iPhone (original model)
- HP TouchPad tablet
- Sony Blu-Ray player
- Two internet radios (Aluratek and Livio)
- Wii
ALL of these devices were connected wirelessly to the network. When I set up the new router, I used a different network name/SSID, but kept the same security key/password. All of the router settings were kept the same (e.g., WPA-2, etc.). After the new router was up and running, every single one of the devices listed above connected (after an initial setup with the new network name, of course) EXCEPT the All-in-one/touchscreen computer. I've tried over and over, and it refuses to accept the security key/password. (The desktop, laptop, and touchscreen are all running Windows 7 64-bit Home Premium.) After doing some research, I tried some suggested solutions, but nothing seems to work. Nothing on the problem computer has changed since it was last connected to the old router. I checked the "Properties" of the network device on both the Desktop (which has no problems connecting) and the Touchscreen, and they are identical: WPA-2, AES, etc. And I'm 100% positive I'm entering the security key correctly. I've rebooted the router and the computer several times.
I have linksys WRT120n (just bought it) now connected with ethetnet cable i have a laptop and an 2 iphones that wont connect the network after a while, the only way that solves the problem for a while is unplugging the router from the electricity and plugging it again and then after few hours or a day the problem returns.
Client Lease Time: 1440
the devices have an IP reservation
network mode - mixed ( B G N )
I'm trying to connect my printer to my wireless network via my new Netgear Gateway 7550. The printer will not accept the Wireless Network Key for the router.Had no problem with the old 2Wire gateway.
View 1 Replies View RelatedI am attempting to connect a video streaming device to my wireless network and it will not accept what I think is the password
View 1 Replies View RelatedRegion : Singapore
Model : TL-WR941ND
Hardware Version : V3
I would like to connect a device (dataloger that sends data to a remote server via internet) which only has LAN port to a wireless network on the location. I managed to do this once with WA901ND configured in Client mode (WA901ND acts like a wireless card for this data loger).Does WR941ND support this feature (which feature should I use?) or should I buy WA901ND again?
I can't connect to a wireless network even though I have the right password. I've tried connecting with my PC and my laptop but I'm getting the same problem. My aunts laptop and ipad was able to connect to the network. I can only connect to the wireless network when the yellow wire is connected from my laptop to the router.
View 7 Replies View RelatedModel E1000
I wrote down the password of my wireless router on installing it. However, each time I want to add a new device to the router, the password that I wrote down does not prompt the router to recognize the new device or equipment. How do I go back into my computer and retrieve the password to my router if I did copy it down wrongly? how to retrieve the password.
I bought a Wireless-N Home Router MODEL WRT120N so that I could use my new Kindle Fire online, since I could never catch an open wi-fi signal in my house. Router IS correctly installed and working fine.....but when I go to use my Kindle, I see it on the list, click on it, enter my password.......and it tells my my password must be incorrect. I KNOW it is correct! I even went and CHANGED the password just in case!
My Kindle keeps giving the message "Unable to connect to the selected Access Point. Please check the password you have provided."
I have a computer running Windows Vista that has been unable to access the internet, either with wireless or cable. It just says that no connections are available.Troubleshoot doesn't detect any problems.I also realized that I cannot access device manager, nor can I add/uninstall anything. When trying to get into device manager, I get " the specified service does not exist as an installed device".
View 3 Replies View RelatedHow to connect secured wifi network to mobile device
View 1 Replies View RelatedI just upgraded my wireless router to a D-Link DIR-655. I have 2 PCs and a network storage device (D-Link DNS 321) connected via ethernet to the router. I also have an xBox 360 connected wirelessly to the router. The xBox is able to connect to the internet via the router, but it cannot connect to (see) the PC's or the network storage device. It was able to do so with my old wireless router (a Belkin), but it stopped with the DIR-655.
View 4 Replies View RelatedBoth the integrated wireless adapter in my PC and a USB adapter work fine and conect automatically to my D-Link DIR-615 router. I have the integrated adapter disabled in the control panel. Just bought a D-Link DWA-140 Rangebooster N wireless adapter. This finds all the networks my older USN adapter finds but at greater strength. When I click on connect to my own network I get the enter network key box. I enter the correct key, but get an error message telling it's incorrect. I revert to the older adapter or enable the integrated adapter and I get connected automatically.
View 5 Replies View RelatedI have Linksys WAG120N ans ADSL+ Network from Netia (Poland) Internet is working from cable (Ethernet) but in WiFi I have big issue. url...My device who works fine:
-iPhone 4
-iPhone 3G
My device who don't connect to the WiFi network:xbox360 (new edition black with build in WiFin adapter)Asus Eee PC 1000H (Windows 7) witch WiFi.Xbox360 an Eee PC works only when i disable the Wireless Security ;/ i tried plenty option Wireless Configuration manual or Wi-Fi Protected Setup. I tried all Security Mode i works only when i disable.
In OS X 10.6.5, the following dialogue popped up:.Do you want the application "master" to accept incoming network connections?
View 3 Replies View RelatedI am not able to connect to password protected network while others get connected to the network and are using it.even if it gets connected it shows no internet access. I tried troubleshooting and it said no valid ip configuration.
View 10 Replies View Relatedlost my password-can't connect my new nook to my network.
View 1 Replies View RelatedMy laptop was fine until I got an I pad for Christmas. It took me two weeks to figure out how to get the I pad online...should have been minutes I am told.now my laptop is off and I can not get it back on line..
View 1 Replies View Related