I use a USB modem(wireless) for connecting to the net. This way only I can connect to the net on my laptop. Wanted to check if there is some hardware available which can allow me to create a wifi network at my office using this USB wireless modem so that others can also connect to the net with this connection.
I have an Inspiron 1545 and I reinstalled Vista 32-bit, but I having problems with the comms driver (Conexant D400, External USB 56k Modem Rev : a05) and having the following message appear when I install the driver?
I have a "vpn device" (that is what they called it to me) basically its a custom no-name black box with a lan and a wan port that my office gave me. It is running url... vpn connection to my office automatically so no computers have to run a vpn client locally. "It just works".Previously I had a DL 4300 set to bridge mode so I could get wifi. VPN device doesnt have wifi
I replaced the DL-4300 with a 655 because I wanted N speed for wifi and I got a DAP 1522 to wirelessly bridge my dvr and a htpc.I have read through the many threads of the 655 and bridging and it being removed and I'd love to use the 655 as my router to take advantage of all the other routing features, but alasSo here is my setup as of now, they set my vpn to be 10.86.83.1 so that is my network.Cable Modem -> pfSense -> switch ->
-> office computers and printers -> DL 4300 10.86.83.2 (I'll soon disable this and remove it, or maybe setup another remote ap in future) -> DIR 655 10.86.83.3 (using Lan port not wan port)
Laptops/phones connecting to new 655 wireless SSID, however I'm not sure how you tell if its using the DAP1522 or the 655 or is that just seemless and I shouldnt know?Also I couldnt get a dhcp via the 655-> ... -> DAP 1522 from the pfSense router. So I just enabled DHCP on the 655 and now I get ip and internet access.Really have no idea how that is working having 2 DHCP servers, but I guess they are smart about it (for now..or just lucky)
Region : Australia Model : TD-W8950ND Hardware Version : V1 Firmware Version : 1.2.9 build 110212 Rel.22296n
I made some changes on my wireless modem router to stop dhcp and dns provided by my device. A server is now doing it, but at the same time I appear to have connection issues where I didn't before. In an attempt to resolve the issues I looked at the System Log and a number of things were coming up that concerned me. These are as follows:
-user: tr69c: Unable to retrieve attributes in scratch PAD
-user: Stored Parameter Attribute data is corrupt or missing
Additionally I'm getting a lot of kernel: Intrusion alerts which I can't determine how serious they are. Where to start tracking down these issues (if they even warrant investigation).
My desktop PC don't have the opportunity to make sync between the computer and my phone, (Samsung Galaxy SII ) via Wi-Fi. There is no Wi-Fi in my Desktop PC, and I use cable to the Internet.so that they can talk to each other via Wi-Fi connection.
We purchased our son a Netbook for Christmas - all of our other laptops will connect to our MiFi (Verizon) device but NOT the Netbook?? It states Excellent Strength but after attempting to connect states Failed to associate with the unit.
Basically the internet connection on my PC will freeze when my mobile phone (HTC Desire) connected to the same network via WIFI is near the pC. If I remove the phone into another room the connection un freezes. If I switch the connection on the phone to the mobile network the problem never arises!
I own a wireless router (ZTE W300) and due to the large number of devices in my house, and limited broadband usage, can I limit downloads/uploads (in other words, limit data usage) to a particular device over the network?I think the stock firmware on my router doesnt allow that (and its pretty base level too). If so, do you recommend any other firmware that can do the task, and is compatible with my router?
I have Linksys WAG120N ans ADSL+ Network from Netia (Poland) Internet is working from cable (Ethernet) but in WiFi I have big issue. url...My device who works fine:
-iPhone 4 -iPhone 3G
My device who don't connect to the WiFi network:xbox360 (new edition black with build in WiFin adapter)Asus Eee PC 1000H (Windows 7) witch WiFi.Xbox360 an Eee PC works only when i disable the Wireless Security ;/ i tried plenty option Wireless Configuration manual or Wi-Fi Protected Setup. I tried all Security Mode i works only when i disable.
I just purchased a Linksys EA 4500.I set up the wifi properly, with laptops, tablets, smartphones and printer. The wifi network worked fine for a couple of days.But now one of the laptop "refuses" to see the Linksys wifi network. The other devices are still connected and running regularly.
The notebook that does not connect anymore is an ACER 5740DG with an Atheros Network adapter and Windows 7 installed. This notebook is otherwise running fine.At the beginning it was connecting ok and we never had any problem at all with the previous router Belkin_N+_7991AC, that I changed just for speed.
Now the Linksys network is simply not visible to such notebook in the "Available Connections List" that I get clicking on the WiFi icon in the bottom right, while a number of other wifi networks (not mine) are clearly visible. Of course I restarted the notebook properly. For one time I got the visibility of the Linksys, I entered the password and then it was not possible to see the network anymore.No error message from Smart WiFi software.
I am having trouble connecting my device to certain WiFi networks. We work with hotels and we have a handful of devices that are just not able to connect to their network. Te device works fine in my office. When I get to the Setup page and do a site survey, it'll get to 100% and then display a "page can't be found" as oppose to showing me that it has been connected. We had the MAC address cleared in their network and still no luck. Firmware has also been updated.
The smart wi-fi app Device List indicates Local Network = 0 (that's incorrect) and Guest Network = 0 (that's correct). When i click Connected Devices for My Network, i see a list of devices but everything indicates 'Offline' and that of course is incorrect.How can i upgrade this software? I recently installed EA6500 and due to being slow, it was recommended to set back to factory default. That process did no go well, so i hope it is not necessary again. This router is not any better then the wrt320N so i am disappointed.
In the next month or so I plan to replace my old desktop PC. It is currently connected to a Linsys E3200 wireless router. I have many other wireless devices also running off the E3200, but my PC is the only wired device connected to it. When I replace the wired PC do I simply switch the new one in with the existing ethernet connection (I'm sure it is not that simple) or do I have to start over again recreating my entire network..security etc.. ? If so what is the process to start over ? Do I have to reset something on the router, reload cisco connect, create a new network name?
I am using a EA4500 and use Linksys Smart Wi-Fi to manage the device. In the household we have multiple Apple i devices. Somehow the Linksys Smart Wi-Fi combined two separte i devices (iPhone 5 and a 4th generation iTouch) to one user.The devices actually have different names, but the Smart Wi-Fi is combining them into one device. So I can't use Parental Controls on one of the devices.
I recently upgraded my Wi-Fi router to an EA3500 and am controlling it using Smart Wi-Fi running on a wired Windows 7 machine.So far, I have been able to add devices to the network without issue and each of those connections works fine. All, except my TV, have been Windows 7 based machines. Smart Wi-Fi Device List has been able to "see" each device and I have been able to add them to that list as well.
I am attempting to add a Windows 8 desktop computer to the network which is using a external USB wireless adapter. That computer can see and connect to the network through the EA3500 and the connection seems to work fine. The only issue is that its adapter does not show up in the Device List.
1) Does the Device List do anything else besides showing a list of devices I chosen to add to my network?
2) How do I get my Windows 8 wireless adapter to show up in the Device List?
I have an AT&T DSL modem connected to my desktop computer. I just bought a Kindle Fire HD and I need to get it hooked up with WI-FI. Do I need to buy a separate router to have WI-FI or doe my modem already have it?
It works sometimes. I imagine it has a noise problem since sharing files works, internet works. I cannot remember how to change channels on this router to save my life, though. What is special about sharing a printer?
I have a 3g usb modem hooked up to my main Windows xp laptop. I'm also sharing that 3g connection with ICS out the ethernet port on the laptop to my wifi router.
All works ok and I'm able to browse from all computers connected to the wifi router except when I turn on the main laptop's wifi to connect to the same wifi router that it's connected to through ethernet for ics.
I am able to ping google and stuff and also use skype but I can't browse the web on any browser. If I turn off the wifi card on that laptop then I'm able to browse again with no problem on the main laptop and on all other connected computers.
I'm not sure but I'm guessing that the browsers are trying to connect through the wifi connection and no longer through the 3g usb modem?
The reason that I turned on the wifi connection of the main laptop to connect to the router is because connected to the router is also my security cameras dvr system and this way I can see my cameras on this main laptop.
So in other words, I have to turn off my main laptop's wifi connection to be able to browse the web but then I cant access the security system's dvr any longer.
My router's ip is 192.168.1.1 My dvr's ip is 192.168.1.100 My laptops' ip is 192.168.0.1