Linksys Wireless Router :: WRT610N - Unable To Connect New Devices To Network

Jan 3, 2012

I have a WRT610N which does not allow me to connect any new devices to the wireless network. This is a recent problem as I have been able to connect new devices before. Devices on the wireless network, those that have been on the network, are able to disconnect and reconnect. Just new devices are excluded. Have gone through the admin screens to see if something is amiss but can not find anything.

View 5 Replies


Linksys Wireless Router :: Unable To Connect Asus PCE-N13 To WRT610N V1.0 N Network

Dec 29, 2011

I am unable to connect the Asus PCE-N13 (Windows 7 host) to the WRT610N V1.0 N network.  The adapter does not see the N network on the LinkSys but there are other N networks in the list.  I have updated the latest drivers.  My PC Laptop, Macbook Pro, and Xbox 360 connects to the N network.

View 2 Replies View Related

Linksys Wireless Router :: How WRT610N Firmware Run Devices Externally

Sep 4, 2011

I have various wireless devices in the house, some of which (smartphone and Windows 7 laptop are working fine, but all of the devices using my WET610N can only see devices in the house, not externally. I also tried updating the WET610N to latest firmware (1.0.04) but still no luck. Has something changes in the WRT610N configuration panels that I need to turn on to allow this?

View 9 Replies View Related

Linksys Wireless Router :: WRT610N - Assign Unique Address To Each Devices?

Jun 14, 2012

2 of my attached wireless devices have the same IP address different MAC address. How can I assign unique address to each of the devices

View 1 Replies View Related

Linksys Wireless Router :: EA4500 - Unable To Connect Any New Devices?

Sep 28, 2011

I have several devices connected to my EA4500 (two wired computers, two wireless laptops, iPhone, iPad, and a network drive). i have not been able to connect any new devices wirelessly.  New laptops, PS3, friends laptops.  Error message would suggest that password is being entered incorrectly, but I change the password to very basic word (idiot proof) but no luck.

View 9 Replies View Related

Linksys Wireless Router :: WRT120N - Devices Unable To Connect

Jul 28, 2012

We have Cable DSL modem that connects to router.  One wired connection from router to PC.  Wireless devices are 2 iphones 2 ipads and 2 imacs.  Constantly having to power the WRT120N off and back on to regain connectivity.  

View 2 Replies View Related

Linksys Wireless Router :: WRT610 Unable To Connect To Devices Wirelessly

Nov 29, 2011

I have a WRT610 and am unable to connect any devices wirelessly.  All the lights on the right hand side of the router are on except for the USB connection....what am I doing wrong?  The router has worked for about a year flawlessly and last night all wireless connections quit.

View 9 Replies View Related

Linksys Wireless Router :: Unable To See Network Devices Connected To SE2500

Jul 3, 2011

I cant see in my network the devices connected to SE2500 just the SE2500 itself. The internet access of the devices connected to SE2500 is working correctly.  Is this a problem?

View 3 Replies View Related

Linksys Wireless Router :: Wrt610n Unable To Access Web Setup From 4 Different Windows 7

Feb 22, 2012

I'm unable to access the  web setup screen from 4 different windows machines running IE 9 or Firefox (various combinations of wireless, wired, etc.). When I get to the certificate error and hit the "yes, i understand, continue", it comes back with a 'can't be reached' page and looking into the details says the 'connection was dropped'.  However If I connect from a MacBook / safari, I'm able to reach the page fine (and admin the router).
Using a wrt610n.I am connected to the router, the ip address hasn't changed, the password hasn't changed.I can use the router & connect to the internet.I have the router set to require HTTPS, but switching it to allow HTTP doesn't work. Both Wired & Wireless Win 7 / IE9 machines can't connect.Tried setting the router ip address to 'trusted' zone in IE. Tried setting the router ip address to the 'compatibility' mode in IE. Tried using latest version of Firefox with the same results.

View 3 Replies View Related

Linksys Wireless Router :: WRT610n Unable To Login Config Page Via HTTPS

Jul 13, 2012

I'm having wrt610n and there is an issue, i can login to the config page via http, but using the same computer i'm not able to login there via https but the same time i can login via ipad and the other computer, using the https.i even tried to reset the router settings, but the result was the same, so what PC option can cause it?

View 6 Replies View Related

Linksys Wireless Router :: WRT45G - Connect Two Devices On The Same Network?

Sep 15, 2011

I was requested to connect 2 WRT54G devices in our network with same ip range.

View 2 Replies View Related

Linksys Wireless Router :: WRT610N Isn't Able To Connect At All

Dec 25, 2009

I purchased a WRT610N router early this month, the wireless network was working completely fine when I first set it up. Today I tried to connect my laptop to my wireless network. The laptop isn't able to connect at all. I also got a Sony PSP which has WLAN on and that saying it cannot detect any access point which would be my router.

View 3 Replies View Related

Linksys Wireless Router :: WRT610N - Connect To Smart Tv?

Oct 10, 2011

To connect my new "smart tv" with my wireless linsys WRT610N, smart tv ask to take off all protection such as firewall and antivirus. Doing so, I cannot connect my laptop with my router. Is there a solution to connect both at the same time?

View 1 Replies View Related

Linksys Wireless Router :: How To Connect Two Cisco WRT610N

Dec 28, 2011

I want to connect one "wrt610n router" to modem directly through Ethernet cable and when i connect both of them every thing is working fine and iit gives proper internet connection through WLAN [code] But, when i tried to connect "second WRT610N router" through "first one WRT610N router" through LAN_cable(cat 5) then second router do'nt provide(give) internet connection second router ip--

View 4 Replies View Related

Linksys Wireless Router :: WRT610N Ps3 Won't Connect / Signal Strength Is 100% But It Just Times Out

Jan 5, 2010

For some reason my ps3 wont connect,the signal strength is 100% but it just times will randomly connect BUT cant stream anything or connect online.Or it will get disconnected if someone turns on my mine computer in the other room/Should i DMZ the ps3?Routers a  WRT610N dual N  Firmware Version: 2.00.00 B05 cant upgrade to 3.00  because of "upgrade failed" error.

View 9 Replies View Related

Linksys Wireless Router :: Enable Network Lock On WRT610N

Jun 24, 2012

I have had my WRT610N for several years and I noticed the other day that my network was not locked.  I went to task/change wireless connection and clicked on it.  The next screen gives me two options: " Wireless Security" or "Network Lock" and under network lock it states "Network Lock: Not enabled".  I then click on the enable network lock button and I get the following message "network lock could not be enable."  No matter howmany times I do this I get the same message.  So, why is Network Majic not letting me lock my network?  It has always worked before and just recently did this.  I have done a factory reset on my router to see if this could be the problem, but i still get the same message.

View 1 Replies View Related

Linksys Wireless Router :: WRT610N Connection And Network Storage

Mar 11, 2009

On my network I have a wired PC running Vista Ultimate, a wireless g notebook running XP Pro, a wired PABT box for VOIP, an iPhone, a wireless g Mediagate MG350HD media extender connected to the TV in the lounge (about 10 metres away through 3 wooden walls) and I have a usb hard drive connected to the WRT610N router.I have only switched on the 2.4 band on the router - 5.0 band requires the client to have wireless N anyway, so since I have no wireless N devices it's no use right now?To manage my network I use Network Magic.
Problem #1.   My Mediagate MG350HD keeps dropping it's connection to the network. I have tried using DHCP and a static ip for it but it still drops. The only solution I've found is toremove the blanked-out Mediagate from the network map in Network Magic, reboot the router, click 'search for new devices' in Network Magic and MOST times it will redetect and reconnect the Mediagate.
Problem #2. Trying to configure the network storage device (my USB hardrive) is a pain in the arse.In the routers storage tab I cannot make sense of the folder creation. All I want to do is share specific folders and all their contents on the network. Every time I go to assign access rights and click the groups over into the access granted column and hit 'save' it puts them straight back in the access denied column. Does this have something to with permissions on my PC? When I go into Network and Sharing Centre it now displays 'Network Storage', when I click into it 3 networked folders appear, when I try to set permissions on these folders I hit apply and the boxes I've just ticked blank-out again. The folder marked 'Network Hard Drive' (the one I set-up using the storage tab in the router) does not display the subfolders and the actual movies stored on them. When I try to change the persmissions on the using my PC, different folders, eg Movies, TV etc... I get the same blanking out of the tickboxes on 'apply'.Is there a step-by step graphical instruction I can follow other than the PDF that came on the disk with the router.

View 9 Replies View Related

Linksys Wireless Router :: WRT610N Not Working And Network Not Obtained

Jan 9, 2012

WRT610N router with v2 firmware stopped working correctly. It loses wired connection via LAN ports.My home network has one PC connected to LAN port 1 and two PC connected via Wi-Fi.Recently unexpectedly the PC with wired connection lost connection.

The symptoms are the following:
- The DHCP local network address is obtained not every time.
- The router ( not usually responds to ping (returns "host is unreacheable) and I even unable to connect to router's web interface.
- The led for the 3rd LAN port on the front face of router is always on while nothing was ever connected to this port.
- Wi-Fi clients (Windows XP) obtain DHCP address for 30 seconds then report that connection is limited and in a few seconds report that everything is
- The internet for both type of clients is almost not accessible (Wi-Fi is better)
Sometimes (but very rarely the wired connection works fine.
I suppose in my case this is a hardware problem. Can this be repaired of fixed somehow?

View 9 Replies View Related

Linksys Wireless Router :: WRT610N Network Connected - No Internet Access

Jul 8, 2011

My main pc is running Windows 7. It is also running MS Windows firewall and anti-virus. It connects fine to the internet via an ethernet connection to the WRT610N.
I am trying to access the internet wirelessly from another pc running Windows XP. The wireless pc indicates it is connected to the network with excellent signal strength. It will not connect to the internet. I can successfully ping the router but it is unsuccessful when pinging an internet address.
An additional wireless pc (WinXP) and my phone (Android) also show connected to the network but will not connect to the internet.
These wireless computers used to be able to access the internet before we moved house. They only thing I think that has changed is the addition of Windows firewall and anti-virus. It may however be something else.

View 1 Replies View Related

Linksys Wireless Router :: WRT610N Network Drive Can't Be Accessed By Any Computer

Feb 27, 2013

I have a WRT610N v2 with current firmware.  The hard drive is a Western Digital Elements formatted to NTFS and already has music and photos so that other computers in the house can view them. This setup was done awhile back, maybe even a year ago.
Anyway, I can map the network drive and see everything there, but then after awhile (minutes - maybe 10) of idle time, the network drive can't be accessed by any computer, either as the mapped drive (W or by clicking the WRT610N in the network tree. It's like it goes to sleep and can't be awakened by activity.
I have searched the forums here and at WD but haven't found a solution or even this exact problem.  I did find a utility on the WD site that is supposed to fix/eliminate the short idle time, but it didn't seem to work.

View 4 Replies View Related

Linksys Wireless Router :: E1500 / Unable To Connect To Network?

May 11, 2012

I have a Linksys E1500 wireless router that I have had for about 3 months and it has been working great up until today. I realized non of my wireless devices could detect the network, so I got on my PC which is hard wired to the router and it to says it had no network connection. So I power cycled both the router and the modem. When it came back up, this PC that I am typing from now has an internet connection but is says it is connected to Network 2 instead of the routers name for the network. My other PC that is hard wired to the router says its not connected to the network, and when I open up the Cisco Connect software it tells me my router is not plugged in. Also, nothing works wirelessly.In the web control panel it still has all my setting intact but still looks like its not connected to the internet.

View 1 Replies View Related

Linksys Wireless Router :: WRT610N Way To Repeat 5GHz Network To Extend Range

Dec 27, 2010

I have the WRT610N, and I was wondering if there is a way to repeat the 5GHz network to extend the range.I am trying to stream content from a Blu-Ray player, and while the 2.4GHz network reaches, the signal is very weak.  The 5GHz network doesn't reach, but I would prefer to stream content through that network than the 2.4GHz.

View 7 Replies View Related

Linksys Wireless Router :: WRT610N - Network Name Reverts Back / Loss Of Password?

May 16, 2012

The network id name for my router has reverted back to linksys a couple of times, also with the loss of password.

View 4 Replies View Related

Linksys Wireless Router :: WRT150N - Unable To Print From Mac Devices

Nov 9, 2012

I can get regarding using the Collobos Fingerprint software through my WRT150N router. I'm using Windows XP SP3 and immediatly after installing (which went extreamy well) it immediatly found and listed all of my home network printers. All of the wired and wireless windows based systems in my house can see and print to the printers without any problem. However, getting ANY of my apple devices (iPad, iPhone etc ) to print will not even show them as listed on the device when I select print on the devices. Collobos says that I have to make sure that Ports UDP 5353 doe Bonjour and TCP 6361 for FingerPrint need to be open both ways for it to work, I have no problem getting into the router settings and have set them up as stated above in Port Range Triggering and enabled. Also made sure Filter Multicast was not check marked in Security. Unfortunatly, that doesn't seem to work as I had hoped.

View 3 Replies View Related

Linksys Wireless Router :: WRT610N 5ghz Xbox 360 Wireless N Adapter Won't Connect

Aug 12, 2011

WRT610v2 running latest firmware.
xbox 360 sees both the 2.4 network (ssid = network1) and the 5.0 network (ssid network2) when it does its scan.
Initially, xbox showed network strength for 2.4 network at 3 out of 4 bars and 5.0 network at 1 out of 4 bars. Connects to 2.4 network just fine, Won't pull an ip address and reports "Not connected" when I select the 5.0 network.

I tweaked the wireless settings per some suggestions I found in this forum and now it shows the 5.0 network at 4 out of 4 bars signal strength. Also turned security on and off and xbox 360 reported the changes in security on the 5.0 network. So the xbox 360 is definitely seening the 5.0 network. and can tell if it is running WPA2 or not. If it can see the 5.0 network and recognizes what security and network type (infrastructure) is set, would would stop it from connecting to the WRT610n router and getting an IP address? No mac filters or firewalls are set and, again, connects just fine and gets an ip address if I select the 2.4 (network1 ssid) instead.

View 2 Replies View Related

Linksys Wireless Router :: WRT160n - Unable To Connect To Network With New Laptop

Jun 24, 2012

This was for a WRT160n v3.0.02 I looked up several suggestions online and decided to update the firmware to v3.0.03 This seemed to only make it worse as I could no longer connect, and when I turned the router off and back on it would allow me in for about a minute and drop me right away.I started tweaking with the settings, and came across some posts here such as this one, started tweaking with the channel settings and everything. Nothing. If anything I somehow made it worse since now instead of dropping repeatedly it wouldn't connect at all except for about a minute after restarting router, then it would drop completely (I would either get the limited access notification or I simply couldn't connect and windows said to unplug the access point. I recalled I had another Linksys router that I wasn't using in storage, a WRT54G2v 1.0.01 so I set that up, no problems... at first. All other devices picked it up right away, but once again, my new laptop decides it's too good for the freaking network and drops it repeatedly telling me there's a problem with the access point. 
So at this point I'm thinking it might NOT be my network, but my wireless card or something, I uninstalled and reinstalled, updated drivers, (I use a Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC) I even came across this article and disabled browser service and NETBios (including all other devices on my network). It brought back the network on my laptop for a bit, only to smugly come crashing down again. 

View 2 Replies View Related

Linksys Wireless Router :: WRT120N - Unable To Connect Iphone To Network

Jul 19, 2012

I have a Linksys WRT120N which had suddenly and unexectedly stopped working after disconnecting my roku box. I didnt worry about it until I got an Iphone and now .I was able to re-establish the wireless connection on my netbook today after a ton of research and messing around with the settings and then downloaded network magic, which finally fixed the problem. I believe that it automatically transmitted the WEP key to the Netbook, which is what I am missing when I try to log into the network on the Iphone.How do I get this password to show up on Network Magic? When I look at the settings, it does not show the actual numbers, they are hidden.

View 6 Replies View Related

Linksys Wireless Router :: WRTP54G - Unable To Connect Home Network?

Jul 2, 2006

I recently installed a new router - WRTP54G . I used to have our 2 machines on a home network. However, that is all gone now. When I open My Network Places on my pc, nothing at all appears. On the other pc only the shared folders on that pc appears. I've tried running the network wizard several times and to no avail. I've checked the permissions and everything else I can think of, but it still doesn't work. I believe it is probably something simple to fix, like checking the right box, but I haven't found it yet. Both machines are running XP Home and I have an external drive attached to my pc. Everything worked fine till the installation of this new router. Should I just create a new network? Would that just be easier? One more thing, I got the error that says Home is not accessible. You might not have permission to use this network resource. Contact admin of this server to find out if you have access permission. The network path was not found. Of course, I am the admin.

View 9 Replies View Related

Linksys Wireless Router :: EA4500 Unable To Access Devices Remotely

Aug 19, 2012

I just switched to the EA4500 Router and I'm now unable to remotely access my camera devices.   I have done the port forward.   I can access the cameras from my local LAN both when using the local  10. ..and external 99 .. Addresses.   When I go off the local connection -   Access does not work. Slingbox did its auto configuration and I can access it.   I just cant get to camera devices (Panosonic, Foscam, etc.).  

View 3 Replies View Related

Linksys Wireless Router :: WRT160N Unable To Connect Ipad3 To Home Network

Dec 12, 2012

I am unable to connect my Ipad3 to my home network (WRT160N router). It has been working for the last 8 months, and stopped working after I installed Direct TV App on Ipad..It detects the network, but not accepts the PW.... I have multiple wireless devicess connected to my network without any problems..The funny thing is that my neighbor brings his ipad to my house and he is able to connect..My ipad connects to any other network...just not my home network.. I contacted Apple who spend hours with me on the phone and suggested doing a full reset on the ipad, but still did not solve the problem..I called and already paid for linksys support ($62.95) who spend hours with me on the phone, but suggesting: "maybe you need to buy another router"...REALLY!!!! Again, I have 3 Smart TVs, Xbox360, and Wii, that are connected to the network just fine .even my neibor comes with his Ipad3 and connects to my network just fine......and I can connect with my ipad to any other network without any problems... BTW, I have already removed the DirectTV app from the ipad....but I still cannot connect to my network..

View 2 Replies View Related

Linksys Wireless Router :: WRT54G2V1 - Laptop Sees Secured Network But Unable To Connect?

Mar 11, 2012

I have a Linksys Wireless G Model WRT54G2V1 using WEP encryption.  I recently added a laptop.  It can access various non-decured netowrks.  It can see my home network but is unable to connect despite entering the correct passcode.  how to get the laptop and secured network to communicate?

View 1 Replies View Related

Linksys Wired Router :: WRT610N - Can't Connect To Or

Dec 30, 2010

I recently tried to connect to my router via (I've accessed it before) howvever this time it says the page is
unavailable.  I've tried it several times for a couple days now and still it wont work. I have also tried

View 8 Replies View Related

Linksys PAP-2T Voip Adapter / Connect 2-3 Devices To An Existing Wireless Network

Aug 18, 2012

I need to connect a pc desktop and A linksys PAP-2T voip adapter to an existing wireless network(home network).

View 7 Replies View Related

Copyrights 2005-15, All rights reserved