Belkin Routers :: Airplay Not Operational Via Cat 5 On The F7D4401
Dec 10, 2012
Why does my belkin f7d4401 playmax router: allow iTunes and iPad/iPhone to see my Airplay B&W zeppelin Air when connected wireless but will not allow iTunes or my iPad/iPhone to see my Airplay Marantz NR1603 when connected via cat 5 cable. (I know the connection is fine on the NR1603, as it streams from internet radio with no problem at all)It seems to be just airplay that is not operational through the router.
View 2 Replies
ADVERTISEMENT
Jun 13, 2013
how to change the wireless channel for windows 7 on the router belkin play max n600 hd model F7D4401 Dual-Band
View 1 Replies
View Related
Jun 12, 2013
belkin play max n600 hd model F7D4401 Dual-Band signal very week so i need the best setup.
View 1 Replies
View Related
Apr 7, 2013
Apple AirPlay won't work on AppleTV (from neither computer nor iPhone) with my new Cisco small busines router WRVS4400N. It was working just fine on old consumer level linksys router. I have spent 3 hours with Apple support to no avail. Apple TV works fine on internet functions (netflix, YouTube, etc.) and I can play music and videos from the cloud, but iPhone and computer can't connect to AppleTV even though the icons appear in iPhone and Computer... just can't establish a connection.
View 2 Replies
View Related
Feb 20, 2012
what Linksys routers, e.g. WAG120N, are compatible with Airplay and Bonjour?
View 9 Replies
View Related
Nov 1, 2012
The last three new APs I have received from our supplier (official Cisco 1142 LAPs) have all successfully connected to our 4400 series WLCs but are all reporting as being in an Operational Status of 'Down' ie their A/B/G/N radios are not broadcasting even though the APs are all in an enabled state. Furthermore, there is no steady green light showing on the APs - there is no light showing whatsoever (although they were displaying the familiar red-orange-green lights while they were pulling down the IOS images from the WLCs).
The only strange thing I have noticed is that in the AP config screen, the ‘Mini IOS version’ is shown as being v7.3.x. The other – working APs – we have of the 1142 series show v3.x. I know that controller code v7.2 and above only work with the newer 5500 and 7500 series WLCs. Could this be the issue and have any of you seen this issue previously? I am running WLC code v7.0.230.0.
View 34 Replies
View Related
Apr 26, 2013
(F5D9230-4 v5111 Belkin mimo router ) is version 5.02.08 the most up to date firmware for my router?
View 1 Replies
View Related
Jan 11, 2013
I have set up a 2811 with seperate VLANs for phones, and another for computers/printers. Fa0/0 is trunked to a 3560 switch, which has all end devices plugged in. I have enabled the IP Routing commands on both devices, and from advice turned off proxy-arp on the VLANs on the router (unsure if this is causing the issue). The setup is as follows
Computer VLAN = 192.168.20.0
Phone VLAN = 192.168.50.0
Both on the same subnet, along with a router loopback address in the same subnet, at 192.168.10.1.I am having an issue understanding why, but if I try to ping a phone from a PC it times out. Or if I try to type the phone's IP into an internet browser to get the phone's GUI on screen, it fails. This should not be happening as IP routing has been enabled on both, and everything is in the same subnet, correct? PC's can ping other PC's and network printing works fine. Phones register and operate fine, but the two VLAN's will not interoute.Furthermore if I try and ping the router's loopback from the switch, it fails. But the trunk is up and operational because DHCP and devices work within their own VLAN. If I try to ping end devices from the switch, it returns 100%. There seems to be an issue with the router looping the different networks together.
View 35 Replies
View Related
Apr 26, 2013
How do I setup my Belkin F7D1301 with a 16 port 10/100 switch so I can use the wireless on the Belkin and have the 16 port switch for my hard wires?
View 1 Replies
View Related
Feb 10, 2010
I have a 6509-E with redundant 3000W power supplies (WS-CAC-3000W) but one supply is current non-operational.From the outputs I'm not sure whether the issue is (more likely to be) with the supply to the PSU or the PSU itself, i.e. whether my first action should be to get an electrian to check the supply or fault call the PSU with our maintenance providers and have it replaced?
View 3 Replies
View Related
Jan 13, 2013
we're using openldap for authorising our user to connect to the webvpn via our ASA.We'd like to rely on operational attributes to do some DAP matching. This is an example of how a user record looks in our LDAP tree:
# extended LDIF
#
# LDAPv3
[Code]......
Are LDAP operational attributes supported at all by the Cisco ASA?
View 2 Replies
View Related
Apr 15, 2011
What is the difference between administrative mode & operational mode in cisco 3560/3550 ?
View 6 Replies
View Related
Jan 2, 2013
If your wireless indicator is flashing red when you discover the smurf, it can mean that someone has tried to logon with an incorrect password. this is not necessarily an attack, it could be someone you have allowed access too, who has forgotten the password? In this case entering the correct password will solve the problem.However putting your own MAC address into the filter will simply block your own machine.
View 6 Replies
View Related
Mar 21, 2013
I have the N600DB Wireless Router I am connected to the internet, but cannot open My Routers Homepage with http://router or http://192.168.2.1. How can I get to this page to reset the router settings? I also cannot connect any of my wireless devices to the network..
View 1 Replies
View Related
Dec 29, 2012
I have two matching N300 Belkin routers. The cable modem feeds into modem1 and modem1 feeds into modem2. I get a good wireless connection on modem1. Modem2 shows up on a wireless scan and it accepts the password. It however will not connect.
View 1 Replies
View Related
Feb 25, 2012
Unable to use AirPlay on a D-Link network. Disable WMM in the Advanced->Advanced Wireless tab.I struggled for weeks with this. AirPlay worked fine on an all Apple network but when I switched to the DIR-655 as the router/ap AirPlay became invisible. I could see the Airport Express in the list of connected devices with an IP address but the AirPort utility and AirPlay enabled apps were unable to see it. Disabling WMM fixed it immediately and I am now back to streaming music.
View 14 Replies
View Related
Apr 30, 2013
I just installed a WLC 5508, running 7.4 code. I can not seem to get the Airplay to work with apple TVs. The iPads and Airplay are on the same wireless network. What can I do to get it to work? Is there any documentation on how to get Airplay to work?
View 1 Replies
View Related
Aug 16, 2012
Struggling to enable Airplay using a WAG160N. Any settings I need on the router? Looking on forums, came across suggestion to disable WMM support. This seemed to work and i had Airplay but now I've lost it again.
View 1 Replies
View Related
Jul 19, 2011
I know Airplay isn't meant to be done across vlans, but surely it should work with things on the same vlan.The 541N's are clustered and have WDS enabled. The wireless VAP's are on the same VLAN, and intervlan routing works. Airplay works if the iDevice and the Apple TV are connected to the same access point, but not across the network.
View 1 Replies
View Related
Jan 2, 2013
I just purchased an Apple TV 2 and am trying to use it with Airplay at my business. We have a WLC526 controller and three 521 access points.
We have a guest VLAN on our network which spans both the wired and wireless networks. The guest VLAN is VLAN # 100 and the numbering is 172.16.1.0/24. On this network, 172.16.1.1 is an interface on our ASA which clients on the guest VLAN use as a default gateway. On the wireless side, there is an SSID configured in the controller called LPGA-Guest which is bound to VLAN # 100. Clients that connect to this VLAN get addresses in 172.16.1.0/24 and can access the Internet through the ASA without any trouble. This has all been set up and working for quite some time.
What I have done is attached both the Apple TV and an iPhone 5 to the LPGA-Guest wireless network. I verified that they both have IP addresses in the same subnet, but when I try to bring up a list of airplay devices on the iPhone, nothing shows up. From what I gather, this is because multicast traffic is not being handled properly.
The following two threads have some info that I was looking at:
URL
URL
This is how I have the multicast options configured in my controller. I don't see an option to enable IGMP snooping.
View 12 Replies
View Related
Dec 22, 2011
I have an issue when I use Airplay through my iPhone4S, my router reboots after 30 secs or so. I have a WRT54G2 v1.5 and the receiver is a Pioneer VSX-1021-K.
However, when I used Airplay through itunes from my laptop, it works just fine. In addition, when I borrowed my neighbors router's(BELKIN) it was working fine also. So this lead me to believe that it's my router that is causing the issue.
View 7 Replies
View Related
Sep 30, 2012
I am currently switching out our Cisco 1130 APs and Cisco Small Bussiness APs for Cisco 1142Ns (I will NOT be using a WLC),
I have setup the AP, and read about some issues with Multicast and Apple Bon. Services.
I ran the "no ip igmp snooping" command and it allowed be to access our AirPlay Devices (Apple TV, AirPort Express, Etc), however our 2 AirPrint devices (Xerox 6125N, & Canon IR3220 via AirPrint Activator) are not showing up at all when connected to the 1142 (they work everywhere else).
Everything is on the same subnet, and 1142 is connected to the same switch has the airprint devices, and one Apple TV.
Both our 3500 Series switches are connected via fiber, AP and AirPrint/AirPlay devices are in the same VLAN.
View 10 Replies
View Related
Jan 2, 2012
I am having a trouble with using iTunes, iPhones and iPads on our Wireless LAN. We have the 2112 WLC and 10 1142N WAPs. If I do a network scan, I can see the Apple TV and see that port 5353 is open, which is Apple's Bonjour service. However, if I try to play music/video in iTunes, or on an iPhone/iPad, I do not see the Airplay icon. If I plug into the LAN, the Airplay icon appears immediately. I have created an allow all rule in the ACL but still no dice.
View 26 Replies
View Related
Oct 16, 2012
I have a Cisco Wlc 4402 , denon 3312 & AP 1142 all three devices are same subnet . But Airpaly not showing in Iphone. But if i put a Airport express in on these subnet then i find airplay option. How without Airport express i can enable airplay...
View 2 Replies
View Related
Oct 12, 2012
We have been successfully using our Aironet 1140 AP in standalone mode with mainly Windows pcs & laptop users, and now, iPads and iPhones. All seem to connect happily through the 1140.
Recently we have a requirent to be able to use Apple's Airplay. Basically, it is not working through the 1140, it works ok via wired ethernet. Can the 1140 support Airplay? - If yes, what precisely must be enabled/configured?
We have a single Class C network without any Vlans. I understand multicast must be enabled, I can't see where to enable this. How to get this working if it is at all possible.
View 3 Replies
View Related
Oct 13, 2011
I have 2 X E4200 router, one is directly connected to the internet and the other is in the bridge mode connected to the first router. I have apple TV connected directly with the bridge router on one of the Ethernet port.I notice that when you start apple Airplay mirroring on the iPad2 both the routers will hangs with no reason and the only way to fix it is to reboot the routers. I have reset both the routers to factory default twice they both are running firmware 1.0.03 build 14 .
View 9 Replies
View Related
May 10, 2012
I have a DIR-665 and I'm trying to install a B&W zeppelin air speaker, the speaker detects the wireless network but I cant see the airplay logo in the PC, mac, ipad or iPhone. Try with another router and ir works. try with a wired cable but still the same problem. IS there any issue with this routers and airplay, ATV or similar items? [code]
View 3 Replies
View Related
Dec 6, 2011
I've got 3 WLC 4402 controllers and the wireless is working perfectly except for 1 issue. We are trying to connect an apple tv, so we can stream picture, videos etc from ipads and Macbooks to a large display for media teaching.The setup works at home, but not at work.The apple TV is on the same network as the wireless apple devices, (we use a 10.6.4.x-10.6.5.254 range), both are dhcping the addresses (have tried fixing but that made no difference). I've enabled multicasting and igmp snooping and set the multicast address as 239.0.0.0 and it still doesn't work.
View 11 Replies
View Related
Oct 16, 2011
I've just confirmed that everytime I try to stream music from my MacBook Pro (iTunes) that is connected to my WiFi network using the 5GHz mode (channel width is Auto, channel: Auto (DFS)) to a couple Airport Express cubes are connected via the 2.4 GHz WiFi (channel width: Auto, channel: 10) the E4200 router reboots. When I set the MBP to use the 2.4 GHz mode I can stream music without causing the E4200 to reboot. The E4200 is running firmware 1.0.03.
View 9 Replies
View Related
Nov 13, 2011
My problem is this: Randomly, the DIR-825 will prohibit streaming to my AirPort Express via AirTunes. It'll also disappear from Bonjour Browser and AirPort Utility. I can connect directly to it, if I enter the IP into the AirPort utility directly.The only way to get it to come back is to either reboot the DIR-825, reboot the AE, or unplug the ethernet to the AE.
View 3 Replies
View Related
Mar 5, 2013
I have a problem when doing Apple Airplay mirroring from my iphone5. Every time it kmocks the wifi signal off so I need to reboot the router. This is only happening on the iphone 5, and not other apple devices using mirroring. Our ipad 3 mirrors perfectly without affecting the wifi. There isn't any specific settings on the iphone 5 for airplay apart from setting it on and off.
View 2 Replies
View Related
Jun 6, 2012
I've got an apple Airport Express and have managed to set it into my network. Airplay works on both Itunes and my phone. However after 10-15minutes the Airplay drops out and the network map shows that the airport express is 'offline'. however the airport express LED remains showing it still have connection to the network. The only way to get it back is to reset the AE. The apple forum has lots of people stating the same problem with WAG120n routers.
-Router Firmware V 1.00.16
-Airport Express firmware version 7.6.1
-windows Vista
View 2 Replies
View Related
Jul 9, 2012
In my house...I have one router upstairs (Belkin F5D8236-4) and great signal upstairs...downstairs signal is not so swift and sometimes, I can't even get a signal. So I thought let me go purchase a router (router # 2) and set it up downstairs and see if that will improve the signal of my Belkin. The 2nd router I purchased is a Belkin N150 (I thought buy 2 Belkins...maybe they can communicate better?). What I need to know is how do I connect the Belkin N150, to my Belkin F5.. and just use it to strengthen my signal to my downstairs part of the house?
View 14 Replies
View Related
