I'm a beginner on networking, and now i've found a problem while i do an exercise.i have one pc connected at one allied telesys but the last one is a trasparent bridge...the AT is connected whit a fortigate the fortigate does nat..and is connected whit the modem.i can go on server, modem receive ping from pc..is everything right..settings.
View 1 Replies
I am testing out some inspection options on an ASA 5505, and I am running into a situation in which applying a http inspection is dropping all outbound http traffic. I get a "protocol violation" error in the logs.
Here is the setup: I'm not sure why the web traffic is getting dropped.
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
[Code].....
is PC health pack safe to use
View 1 Replies View RelatedNeed to deploy ms office compatibility pack via a gpo to a network I work on. I've extracted the exe and have the msi and cab files which I've placed in a network share and given full control permissions to everyone (I did this after it not working a few times with modify), everyone has full control on the 2 files as well.
I've created a new gpo "software deploy" under computer configuration, software, I've assigned a new package and typed the path in the following format \servershareo12.msi. I've moved a test pc into a test ou in ad and back in group policy management I've linked the software deploy gpo to this test ou. I've ran gpupdate /force on both ends.I've restarted the test box, nothing, repeatedly, I even edited the gpo to deploy the software under user and moved a test user into this test ou, same thing, nothing. I then went back to the config above using the computer config instead of user.
We are designing a solution for our customer, they plan to connect 5 site to their main office, on the main office, they use CISCO2911, branch use CISCO1921, so my question is:
1, If I want to use IPSec VPN connect branch and main office, apart from the router, I only need to buy the Security pack, like SL-19-SEC-K9/SL-29-SEC-K9, no need to buy SL-19-DATA-K9/SL-29-DATA-K9, am I right?
2, If I want to use SSL VPN connect branch and main office, apart from the router and SL-19-SEC-K9/SL-29-SEC-K9, I only need to buy L-FL-SSLVPN10-K9 for CISCO2911 in main office, no need to buy L-FL-SSLVPN10-K9 for branch as each CISCO1921 has two default SSL license?
I have a Thinkpad xp service pack 3 I am trying to nurse along til I can get a new one. All of a sudden, I need to repair the network connection every few minutes, I have comodo for my firewall and avast! for my antivirus. Secunia says all my programs are up to date.
View 1 Replies View RelatedMy HP laptop was working perfectly using wireless Internet but after an update of the SERVICE PACK 1 it now isn't working. It connects to the Internet but it says 'LIMITED ACCESS'. It's clearly something to do with that update as the Internet works perfectly on all over devices in the house
View 3 Replies View RelatedI have two acer computers and a verizon jet back, which won't connect except locally on both windows xp and windows vista. I have a dell, toshiba, gateway and they all connect fine.Verizon wireless knows less than I do to trouble shoot this. I need it fixed, and neither computer will work with this device.
View 1 Replies View Relatedi want to know, is c3650G or c3650X switches are already containing rack mounting pack or am i need to buy it seperatly?
View 3 Replies View RelatedI'm trying to upgrade NBAR protocol pack on my Cisco 1941 router, so i downloaded new NABR protocol pack (version 4.0.0) and transferred it into router flash via tftp. When i try to apply new protocol pack with command : ip nbar protocol-pack flash:[protocol-pack-name]
i got this error :
% NBAR Error : Advanced Protocol Pack can not be loaded on top of Standard Protocol Pack
The router is running IPBASE IOS with Security License, IOS image is c1900-universalk9-mz.SPA.153-1.T.bin. Does NBAR2 packages works on IO BASE images?
For the past 2 days I have been having a problem with my laptop taht, actually a bit old. I also have another pc, a desktop, with a d-link modem and wireless router (DIR-615). The problem is that I can't go on the internet with my laptop, because of a certrain error on the Intel PROSet Troubleshoot: "Did not receive IP addresss", in fact the IP address was written as 0.0.0.0, and when I open the internet browser I can't go on to any page. IO have tried everything, believe me, from switching off every thing, to reinstalling the router, but nothing seems to resolve the error.
View 12 Replies View Relatedi use my sim card in modem connected to pc to surf. is it possible to receive calls as i surf through this sim card?
View 1 Replies View RelatedI've got an ASUS G50V that I normally connect to the net through a wireless router but I recently bought a router so I can make a physical connection and increase speed. However I cant get it to connect to the router no matter what I do (i had it working for a few hours at one point but it dropped off again).I confirmed it wasnt the router but running a crossover cable from the laptop to my desktop, setting static ips on both. Now I can ping the laptop from my desktop but for some reason I cannot ping the desktop from the lappy. I've tried everything I can think of but no dice.
View 4 Replies View RelatedI have an old Buffalo router which im trying to connect to a virgin media modemProblem is the router doesn't have a direct Ethernet port for internet, only ADSL.What I thought I could do was connect using one of the LAN ports and make my router think it was receiving internet through a network? Is this possible and how can I do it?
View 6 Replies View Relatedican receive e-mail, but I cannot send it.
View 1 Replies View RelatedI have connected the computer to the internet a multitude of ways, and no matter how i do it, it always can not receive packets. It is sending packets though.I have tried connecting it directly to the modem, with different wires, through a router, through a network card... I'm pretty much at a loss, im not an expert by any means but im not computer illiterate either. Chances are this is a simple fix... My other computer (the one im on) works fine with both cords, connected directly, and through the router to the modem.
View 2 Replies View Relatedis it possible to receive a fax via moblie phone?
View 1 Replies View RelatedI can receive but not send faxes. When I try to send an operator comes on and says please enter the number you are trying to reach. I plugged in another machine and it does the same thing.
View 2 Replies View RelatedI doubted my internet ADSL is very weak. I used Cisco 877 router to gateway internet.I faced the problem my cisco 877 can't receive signal from ISP but I replaced to use Linksys Cisco. It worked.So I remoted to router and issued command show dsl interface atm 0 it can't generate DMT bit per bin it showed error.
View 5 Replies View RelatedCan't receive emails from specific emails. This happened after a Windows update in December ,A and did not correct after the update on Jan .B, 2012
View 2 Replies View RelatedMail in yahoo alwaysworked until recent Sunday . Now can receive email but not send in yahoo Yet a sent copy is saved in my sent box. but my recepients do not get the mail
View 1 Replies View Relatedcannot read and receive emails
View 1 Replies View RelatedCan receive email but cannot connect to the Internet, my user can get to all shared files on the network and get emails through exchange but cannot browse the internetWe turned off the firewall and checked DNS and the IP. It says the local area connection is connected. We added IE to the exceptions tab in firewall.
View 1 Replies View RelatedI recently migrated keeping my original email address. All went well, except I am unable to receive emails from one of my contacts. I can send to this individual successfully, but when the contact tries to respond the reply kicks back to him telling him that there was a delivery notice failure. Email addresses have been verified by both of us and both are accurate
View 2 Replies View RelatedI have problems in the following scenario. I attached an image with a summary diagram of the network in question. The problem is that on the 3rd floor of the site users connect via wireless fail to connect and receive an IP. But they can not navigate. The second and first floor itself. As you see in the diagram are 3 routers, one per floor. The first is the only router that provides DHCP the other two routers are as simple Access Points.
View 13 Replies View RelatedAt random times, my internet will "drop" connection and will not download any packets, but I am still able to send packets. My Local Area Connection icon continues to say I am connected, my modem is fully functional, and my cables are good. I can get my internet back up and running for 10 minutes or so by disable and re-enabling my Network Connection. If I simply try the "repair", it gives me an error at the "Refreshing IP" step.I have done a full system scan for viruses and I am clean. My drivers are fully updated, I have disabled my firewalls, and still no luck. During the times when it is down, I can successfully ping my modem through CMD, but I get the time-out error if I ping a site, my default gateway, the DHCP Server, or the DMS Servers.I have made no changes to any major settings on my computer, nor has there been any recent additions/removals of any software.
View 7 Replies View Relatedi did just had a rogue anti-virus infection i did a removal of it AV Security 2012
View 1 Replies View RelatedAlright, so we have about six computers on average all on at the same time, working just fine, last night one of the laptops just, stopped working, saying there is no internet access, With every attempt it doesn't send any information. When I disconnect it from the wireless, then reconnect it, it immediately receives packets but won't send any.
View 1 Replies View RelatedI have the latest Firmware version 2.05NA on the DIR-825 and while I can make outbound SIP calls I can't receive any inbound calls. The phone will ring but I can't pick-up the call. [code] I am at a loss as to how to register my phone. When I uncheck ALG SIP the phone will not register to my server.I have a Polycom 550 connected to a Trixbox server. The prior router worked great.
View 6 Replies View RelatedI just want to know how or is it possible to hide sent/receive packets from the Router I cracked few days ago?I'm using wifi card airlive wl-1600 usb and the router is TP-Link.I mean how much is possible to hide my connectivity and everything from me with this router?
View 1 Replies View RelatedI have a Verizon Actiontec router without N band. I cannot receive the signal in the farthest corner of my home. Apparently using an N band router will solve this problem with the higher output. Verizon refuses to send me a new router with N band, stating that they will merely send me a replacement for the current router w/o N band. Therefore I want to change this router out. I don't know if the Actiontec has a built-in modem, and if so, how and what can I use as a replacement router.
View 4 Replies View RelatedCan I use a belkin F7D6301 N wireless router to receive wifi? Are there any known firmwares for this model?
View 1 Replies View RelatedI received three things for Christmas: 1. Linksys WiFi E1200, 2. Pandigital Planet tablet, 3. Roku.My family room is on the same level as my Wifi router but about 70 feet apart, but I cannot get a wifi signal in the family room on the Pandigital tablet, however, the Roku seems to be receiving the wifi signal because the Roku works.Is my tablet not working correctly? Can and should my son increase the signal strength of the Linksys
View 5 Replies View Related
