Cisco :: Aeroscout Service On MSE 7.0.105?
Mar 31, 2011
I have recently updated one of our customer's MSE to version 7.0.105. Now for some reason the Aeroscout service will not run. I have tried starting it manually , however it stops after 10 - 15 secs.
here is partial getserverinfo output
-------------Context Aware Sub Services-------------
Sub Service Name: aeroscoutVersion: 3.2.0 - 4.0.14.14Description: AeroScout® Location Engine for RSSI and TDOA asset trackingRegistered: falseActive: false
The weird this is that I have updated our own MSE to 7.0.105 and didnt get this problem.
View 2 Replies
ADVERTISEMENT
Apr 20, 2010
we have installed the MSE 3350 with the lates Context Aware Sup Service from AeroscoutBut the Service still terminated because of unexpected null node message (see below)
View 7 Replies
View Related
May 16, 2011
When I create a service object or group and add the object to a new rule it never works.I mean the traffic match not the rule. I see not hits.I placed the rule on top of my access list to check if I do somethink wrong but it is not working. When I place only a service for example tcp/23 it is working.
my ip service object
object-group service g-as400 description access client 2 as400 machine service-object tcp-udp destination eq 397 service-object tcp destination eq 137 service-object tcp destination eq 2001 service-object tcp destination eq 3000 service-object tcp destination eq 445 service-object tcp destination range 446 447 service-object tcp destination eq 449 service-object tcp destination eq 5010 service-object tcp destination eq 5544 service-object tcp destination eq 5555 service-object tcp destination range 8470 8476 service-object tcp destination eq 8480 service-object tcp destination eq
[code]...
View 8 Replies
View Related
Feb 28, 2012
We have a situation where services are stopped on the real servers. The probes fail and we confirm the services are not running on the server. We cannot access the ports from the ACE directly. We can still however acces the VIP on the TCP port (L4 VIP class-map). So we can still telnet to the VIP on the port from thr Client side of the network.This is on ACE 20 Modules deployed in Routed mode. The version of software is A2(3.3).
Tried removing multi-match and loadbalance policies as well as class-map and re-applying then re-appyling the service policy to interface. Same behavior,This is a problem at another level as some services are being monitored by GSS via TCP keep-Alive and this obviuosly causes a problem as the service then never goes off-line.
View 10 Replies
View Related
Mar 25, 2013
I have a fresh installation of LMS 4.0 on windows server 2003, when i click to open topology i get error message : ANIServer service may be down or Host name isn't DNS resolvable
i tried pdshow -brief ANIServer ===> service UP
DNS is working using host file in driversetc i restarted the server
restared the crmdmgtd
unistall / install java plugin
pdterm ANIServer
pdexec ANIServer
NO change ..
View 6 Replies
View Related
Aug 29, 2012
Can a PIX 501 6.3(4) establish a VPN to a provider such as [URL]? They claim to support PPTP and IPSEC/L2TP. If so, how would the PIX need to be configured?
View 3 Replies
View Related
Feb 5, 2013
"The service provider in your current location is restricting access to the InternetYou need to log on with the service provider before you can establish a VPN session. You can try this by visiting any website with your browser."We are using an Internal IP....and the external, same resultI am the IT Admin and this was working last week till I upgraded to the newer anyconnect. Internet is just fine....I am at a loss.
View 7 Replies
View Related
Mar 16, 2011
I have multiple VPN endpoints setup on our Cisco 2821, an SSL VPN, a site-to-site VPN, and a Web VPN for windows users. For whatever reason, the web vpn service periodically fails. The only way I've been able to bring it back up is to reload the router. Is it possible to restart the service itself?
View 3 Replies
View Related
Feb 1, 2012
Have customer that we need 3G at new location. Their company is an AT&T customer.So we have got from distribution a 881G and it has a PCEX-3G-HSPA-US card with it.What do you do or need to get AT&T service on this card. You call AT&T they don't know what your talking about if you say Cisco 3G card?I don't see a SIM slot which most AT&T device have a SIM card?Is there somewhere special you have to call for these to get service? Any checklist for ordering and also configuring for AT&T?FYI, we will do DHCP with it and it will be our backup ISP on and ASA if the primary internet goes down. We will just use a 172.30.x.x addressing between the ASA Outside-Backup interface and the 881G.
View 1 Replies
View Related
Jul 24, 2011
A few days ago we upgraded LMS to version 4. It worked fine, but after installing patches and updates from Cisco web, the web interface failed and we haven't been able to restore the service.
Service Temporarily Unavailable.The server is temporarily unable to service your request due to maintenance downtime or capacity problems. [code]
View 2 Replies
View Related
Jun 20, 2012
i have only 1 switch 2960 POE at customer enviroment.i did run topology service and checked on the right side POE CAPABLE Devices
it shows me that i have 4 switch POE while actually there is only 1 switch POE in real enviroment.
View 7 Replies
View Related
Feb 4, 2012
have ether-channel across 2 switches?i am new in cisco LMS . now i am in client site installing cisco LMS 4.1 in UCS server-rack version. we did it well for the installation, and the LMS working properly until i cannot open topology service.
i attached the error message
View 14 Replies
View Related
May 14, 2012
I was having some troubles with the LMS client itself (Any job I started would run forever, never finish, never error out, just "running") so I rebooted the server and after a reboot the web interface show up with a "Service Temporarily Unavailable" "The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later"
View 7 Replies
View Related
Jun 13, 2011
I want a solution which should be 2 WAN convert in to 1 WAN.
View 1 Replies
View Related
Dec 22, 2011
I'm in the process of building a media server, and I mentioned to my wife that eventually we can record her shows in HD and get rid of the costs of having a dvr with our cable bill. I was doing some research and I've come to the conclusion that I may need to increase the budget for my build (which is extremely tight) and will not sit well with the wife. I'm using all older/recycled hardware, specs below:
AMD 4400+
asus a8n 32 sli delux mobo
2gb ddr ram
1tb samsung hdd
antec 600w psu
windows xp
I just read last night that I'll need at least xp pro in order to access my server (host?) remotely from say my parents house on a laptop (client?) Is there a workaround or some other program that I could use for windows environment. I'm considering linux for the server also but I've never used any form of linux before, so I fig'd, until I get the hang of setting up the server and having it working properly, maybe make the switch to linux later. The server will be hooked up to my ps3 which will stream movies/tv shows, and I'd like to be able to access my network to watch shows from a different location when I'm out of town.
View 1 Replies
View Related
Feb 7, 2011
I am trying to figure out how to setup quality of service on my network. At the moment i have computers connected to the PC port of my IP phone and the IP phone connected to the switch.I want the PC to stay on the default native VLAN and the phone to go on the VLAN 10I am using SNOM300 and SNOM360. I will configure the on the phone the VLAN ID and the priority.From my research, there are two ways that I can go about this on the port that is connected to the phone I canswitchport voice vlan vlan-idorswitchport voice vlan dot1pand then I will have to execute the commandmls qos trust cosmy question is which command do i use to configure the ports, and am I on the right track? Also, this is how I configure the ports that the IP phones are connected to, how do I configure the port that my Asterisk PBX server is connected to?
View 4 Replies
View Related
Mar 11, 2013
I am having issues (nothing new there) I have a bad IOS on a switch module, and the config is set to boot to that IOS, and as such I get a nasty boot loop, I am trying to figure out how to get into rommon but all the documentation I can find for this just says go into rommon and never tells me how to get there on a switch module that thinks it has a good IOS. (The IOS is for our normal service module but this one is an odd-ball switch)
View 4 Replies
View Related
Mar 26, 2013
I just added an HWIC-16A to a Cisco 2911 router for use as a Terminal Server.[URL]I've installed and configured the card properly. However, I receive the following error message:Attempt from Cisco CLI
View 2 Replies
View Related
Feb 3, 2012
In which case it's useful or needed to timestamp log or debug messages with time since the last reload("service timestamps log uptime")?
View 8 Replies
View Related
Feb 20, 2013
I have an issue where I am trying to start my VPN and continually get the following message: Error 56: The Cisco Systems, Inc. VPN Service has not been started. Please start this service and try again.
So I have been into Services to 'start' Cisco Systems, Inc. VPN Services - this then always comes up with this error: Error 1053: The service did not respond to the start or control request in a timely fashion
The solution mentioned on other posts on disabling the ICS but it was already disabled. When I try to start VPNGUI I also get error 56 and when I try to use services.msc to start the service I get error 1053. Then also when I try to start from task manager services(cvpnnd) i get access denied.
View 1 Replies
View Related
Jul 9, 2012
I have currently a Cisco 3600 router, it has three interfaces (all ethernet interfaces only).We being a client, our requirement is, we want two links one being the primary and one secondary for the fail over.My ISP has done certain configurations, but I am so puzzled what really has been done. I asked with them and they told that they have provided us one public IP 202.166.217.248 via Fibre--> Media Converter-->Ethernet 0/0.At the same time, they have given us a pool of addresses of the network 202.166.216.48/29 through the interface Ethernet 2/1.And we have used all the available public IPs in the server farm.They have told that, for the failover purpose via wireless, they have even used an IP address 202.166.213.114/25.
Now, where my confusion lies is, cant they provide the pool address via fibre? What is the significance of the ip that has been provided via fibre? What actually is its purpose? Isn't it consuming an extra interface ?Cant we have both the primary and secondary link excluding that one additional process?Or, am not understanding the real working mechanism how ISP distribute the internet?
View 1 Replies
View Related
Oct 24, 2011
I was wondering if I could setup my router CIsco RV120W to be able to connect to a VPN serice for my internet connection. Looking to give my small home netwok more sercurity. Is it possible with the Cisco firmware to be able to setup a connection to VPN serice. Do I have the compabilites with this router?
View 1 Replies
View Related
Sep 26, 2011
I was just configured a 3800 router with this command. I cannot get to the ROMMON mode anymore. Cisco says you should press Break key within 5 seconds after the image decompresses during the boot. But mine is ignoring it and going to load running config directly.
View 7 Replies
View Related
Oct 23, 2011
We are evaluating Cisco ACS 5.2 and I can not delete a service policy that was created. The message we receive is " the item that you are trying to delete is being referenced by other items". I am new to ACS, but I did go through each tab in the manager multiple times.
View 5 Replies
View Related
Mar 4, 2012
I have cisco 1841 router in my office.In that router we configured MPLS bgp with two different service provider. [code] We can't able to use the different service provider at the sametime.Cisco 1841 is support two different AS ???
View 12 Replies
View Related
Feb 12, 2012
I have implement MPLS L3VPN on my network to provide service to customer and right now we plan to have service VPLS on our same router. What is needed to run the VPLS in our MPLS network ? I heard that we need addictional switching module and upgrade my IOS to support it but I am not sure.
View 2 Replies
View Related
Sep 16, 2012
Just purchased an RV220W for a customer to replace a WRVS4400N that had no support for One-to-One NAT and have found the One-to-one NAT for this router is only marginally better.
I have three WAN addresses and three devices to map them to. With the RV0xx I've used the following configuration over a dozen times.
WAN Address 1 - the router's public address Port forward HTTP, HTTPS, and SMTP to Windows Small Business Server 2011 Email and Remote Web Access are accessible at remote.company.com
WAN Address 2 One-to-one NAT to private IP address of Ubuntu Server Add the following access rules: Deny allAllow HTTP from any to private IP address of serverAllow SSH from my company's static IP to private IPAllow FTP from my company's static IP to private IPCompanies website is accessible at company.com and I can update the website with SSH and FTP
WAN Address 3 One-to-one NAT to private IP address of the Hyper-V server's Intel RMM module (Lights out remote management) Add the following access rules: Deny allAllow HTTP, HTTPS, and all RMM ports from my company's static to the RMM modules private IPI can access server at rmm.company.com from my companies network connection
My problems are as follows:
The One-to-one NAT option now requires you to specify the service you'd like to forward (Note: service, not services)If you select the Any service which is the only way I can see to have more than one service, there is no way to add any specific Allow or Deny rules because the Destination box is grayed out on the access rules page.This results in my Ubuntu server only having HTTP forwarded to it and my RMM module having all ports opened up to any IP address. There must be some way around this! I don't understand why the Destination IP option is greyed out for all Inbound access rules. I have been using this same configuration with the Cisco RV0xx, many Sonicwall firewalls, as well as several Cisco ASAs. Obviously this is not an ASA but this implementation of One-to-one NAT is useless!
View 5 Replies
View Related
Nov 14, 2012
environment: LMS 4.1 on Solaris 10 from time to time Web-UI Login is not possilbe showing a message "Service Temporarily Unavailable".Troubleshooting the problem we discovered that lots of TCP-Connections are in CLOSE_WAIT state when WEBUI-Unavailabilty comes up. [code]
View 4 Replies
View Related
Oct 23, 2012
I have found cisco's config for dynamic DNS on an ASA. However, I have seen many articles that the ASA doesnt support the HTTP update method that most dynamic dns services use.
View 2 Replies
View Related
Mar 24, 2013
i have two CSS-11503 in redundant mode running 8.20 code. We had an incident in our network where a layer 2 loop caused some high traffic through the CSS' and had to shutdown some network gear(including the CSS) to clear the problem. When the CSS' were powered back up, the SSL service was suspended, why this would occur? There rest of the config appeared normal. I am the only person on these boxes, the configs were written, and I have never had a reason to suspend the ssl service.
View 1 Replies
View Related
Oct 30, 2012
We are using ACS 5.2 in our Network. As can be seen in the provided figure, nothing in the Access Services can be displayed properly.
View 4 Replies
View Related
Aug 12, 2012
how to change the order of the groups that are displayed at the SSL VPN sign in page? I am using an ASA-5520. Right now the anyconnect client group displays above the clientless SSL intranet group and I want it reversed.
View 6 Replies
View Related
Nov 30, 2011
I encountered this problem with cisco 870 atm interface. I applied service-policy output, its being accepted but when you do a show run interface, it's not there.
View 5 Replies
View Related
