Cisco :: Changing Passkey On 861-W Wireless Router
Sep 8, 2011How to change the password on a 861-W router. When it was set up cisco did it.
View 9 RepliesHow to change the password on a 861-W router. When it was set up cisco did it.
View 9 RepliesI am trying to connect a device (Wiimote, hehe) to my Rocketfish Bluetooth 2.1 EDR USB Adapter. However, when I try to connect to the Wiimote, it requires me to input a passkey, and it does not have a passcode. There is no skip button, and the only option out of Skip, Next, and Cancel I can choose is Cancel. Is there a way to get around this? I've found other guides and I can't get it to work.I am on a Dell Dimension E510 running Windows XP Media Center Edition SP3.
View 12 Replies View RelatedI installed an IP camera, and had to change my E1000 router settings to a static IP address. Now I can't access the router settings. 192.168.1.1 is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place. I'm not very good at this stuff, and it's a small miracle that I did it once.
I just reset my router to the factory settings in order to make some changes to it. However, when I tried to change the SSID to a unique name, I was unable to connect my computer to the wireless network. I then reset my security settings and left the SSID to the default name "linksys_SES_54125" and it is working just fine. I tried to connect with two separate computers both running Windows 7. My router is the WRT54G v8
why I wouldn't be able to connect to my wireless network when I change the SSID?
How do I change the channel on my Linksys WRT54G2 ROUTER?
View 3 Replies View RelatedI want to change password in my EA2700 but don't know how to do it. How to change password in EA2700?
Looking for [url]
Find the best [url]
chaning the NAT Type to open because I can't play with some of my friends on Playstation.
View 2 Replies View RelatedI'm using the Linksys WRT160N V3 for testing a few ambedded applications.I need to set the speed of operation of the router to 100Mbps. (or at least find out what speed it currently supports) I looked up the router home page and couldn't find anything concrete.
View 3 Replies View RelatedMuch of the time my wireless printer is offline relative to computers on my LAN because the IP Address has been changed to some value different than what the computer thinks it should be. So I have to figure out what the IP Address is of the printer then modify the printer port on the PC to point to the correct address. If this only happened rarely or if I could easily remember the steps I have to take to remedy the situation, I guess this would not be such a big deal. But it happens a lot and I'm old and alzheimery. So my question is: how do I get the router to assign the same IP Address to the printer all of the time?
View 2 Replies View RelatedIs it possible to change the look of welcome page (guest login) to change so that it is personal. Of course it would be great if the guests have to log on your personal page.On this page you would be able to indicate the rules and and limitations. It would also be a good option for certain that your guests a limited time duration for the connection and gives max download. This would also be found to be in a log.
View 2 Replies View RelatedI have a WTR160N-RM. I just moved and the cable technician hooked it up unsecured. I didn't catch it until he left. I can access the Linksys webite with the standard IP address and generic password, but I'm not sure what needs to be changed. I've looked at several UTube videos and read some online instructions, but they all different a bit. How I can secure my wireless again? I have an old Toshiba LT that just keeps on tickin'.
View 7 Replies View RelatedI have a broadband connection and recently I bought a new D-Link wireless router for accessing internet on my Android phone via Wi-Fi. Router model no. is N 150 DIR-524.After configuring it was working fine for a week or so and then one fine day internet stopped working on my PC and router LED for internet was not glowing as well. So I called my ISP and they changed my ethernet card settings (nVidia).They changed the 'Speed/duplex settings' from 'Auto Negotiation' to '10 Mb Half Duplex' and then the internet started working. During this they had disconnected my router. Once they were gone, I reset the router and connected it back. Since then it ain't working Internet works fine when the cable is plugged directly in the ethernet card but doesn't work when plugged via router. Router does everything right from opening the '192.168.0.1' page to saving the settings. But there's no internet access.
View 8 Replies View RelatedAfter changing name and password, the speed became much slower. Checking it with speed test, download is just 0.19 Mbps while upload is 3 Mbps. Wired speed is much better, download is 20 Mbps. So it is not the problem of I provider, comcast. How to solve this problem? I rebooted and reset it already.
View 8 Replies View RelatedI am trying to add the E3000 to my existing network to provide Wireless Connectivity for my users. The main router is a RouteFinder SOHO VPN (RF560). The RouteFinder acts as a gateway and provides DHCP. I do not want to change it's role or settings. When I added the E3000 using a Lan-to-Lan connection to the RouteFinder, all users lost access to the internet. As a quick fix as I was working on something else at the time, I just unplugged the E3000. Now I am reading through Article 3733 that I was originally referred to and that has me changing the settings on the RouteFinder which I do not want to do. Is there any way to accomplish adding this to my network without changing anything on the RouteFinder at all??? By the way...I am located in another state than this router and network. I can call and have someone plug and unplug stuff but all of the configuration has to be done remotely.
View 7 Replies View RelatedIf I have a wireless network set up with the Linksys E1000 using one internet provider and then change the internet provider service to someone else, do I have to reset up the network or is it simply a matter of connecting the new internet service to the router?
View 3 Replies View RelatedI have a CANYON Wireless N Router CNP-WF514N1A. It was working properly, but I changed its deafult password to my own . (192.168.0.1 -> wireless security -> new pass -> okay -> reboot computer ). After I restarted the computer, the router stopped working. The lights on it are fine, and if I plug the net cable into the computer I have internet too. The problem is, if I plug the cable into the router, I don't have internet. And I can't open 192.168.0.1 either.
View 1 Replies View RelatedI have WRT160NL with Firmware Version: 1.0.02. After 3 days of trying to connect my WD Elements 3TB I succeeded with 2 partitions of 1TB and one of 700 Gb not visible from router. I'm ok with that. The problem now is when I copy my files. I'm trying to create TV Series library for my Apple TV. Everything is working fine except the size of the files. When I'm copying files from PC USB they are corrupted on the network storage and not accessible. When I'm copying one file of size 350 Mb on the Network Storage via WIFI working fine but is saved with size of 2,7 Gb.
View 6 Replies View RelatedISP : Charter Communications
Modem : Motorola SURFboard SB6121
Router : Linksys E1200
I started out installed on the CD and then I kept getting messages about not being set up and finally it kicked me out. So I started out with the basics, changing out ethernet cables and checking connections. I then tried cycling the modem, router, computer and still no go. As soon as I plug the modem straight back into the computer it kicks back on. So then I tried some other trouble shooting ideas on the forums with the last being MAC address clone, save changes, release renew IP, and finally another round of cycling and I still can't get it to work.
A client was having some email issue and was requested to change the 1841's LAN and WAN interface MTU to 1400 bytes. i've used 'mtu' command but was rejected and got an error like to one attached. so i used 'ip mtu' instead to make the change.
What's the difference between the 2 commands and if this would achieve the said change. I've checked using the show interface it's still showing MTU of 1500 bytes.
We are upgrading our dsl to cable. We have a cisco 877 router/dsl modem and windows sbs 2003 r2. May I know how do I change the ip addresses in the router, and how do I add a cable modem to the router?
View 1 Replies View RelatedEvery so often (random amounts of time) my internet setting either on the router or pc change and then I it comes up with an error that my settings aren't the same as my router... I use a Orange Live box and windows 7. also when I want to sign into games for windows that sometime crashes the internet and on DOW2 and minecraft.
View 10 Replies View Relatedi am willing to know that how we will refresh our WAN IP's dynamically.
View 3 Replies View RelatedI am trying to configure a router with a satellite connection. I am following a HughesNet guidline. At step four after typing in the required IP address , nothing happens.There is no place to type user name and password.
View 2 Replies View RelatedI need the capability to log into the 3g/4g modem and change the Wan IP address. Doe anyone know of a 3g/4g modem that allows you to do that. My other option would be to disable the wireless radio on the 3g/4g router and connect my Linksys Wireless router that I know I can log in and change the WAN Ip. It looks like to me that this model below would allow me to do that?MBR1516 Will turning off wireless radio on the 3g/4g router completely turn off all routing or could there be a conflict with my Linksys wireless router?
View 6 Replies View RelatedI've finally gone and done it. I phoned up aol and requested my MAC code.With my new ISP ( possibly ZEN ) if I keep my existing netgear router, can I keep my wireless connection settings the same i.e. network name, wep key etc.If, on the other hand I get Zen's router which is pre configured, I would need to set up the wireless again. Could I still use the same network name and wep key, or would I have to chose new ones.
View 3 Replies View RelatedI have a private minecraft server running off an old computer in my house. i recently had trouble, i was unable to connect. after some investigating, i found that my router changed the servers internal ip, and as a result i had to re-forward all the ports. a short while later, i rebooted the server, and its internal ip changed again. first is was 192.168.1.103, but then it went to .129, and now its .137. how can i stop it from doing this? ive never had this issue before. its a cisco linksis e2000
View 3 Replies View RelatedI need to CHANGE the password of my netgear router.
View 2 Replies View RelatedI have configured PBR on my 1800 series router, it is working perfect. Now I am changing my router from 1800 to 2901 router with the same config, so the PBR stop working and I am not getting hits in the second WAN interface. [code]
View 2 Replies View RelatedI have a new SMART T.V. I have no trouble hooking up wirelessly to my N300 router, I can get on the internet without any problem. Then I added a wireless speaker system, now the T.V. won't hook up to the router any more. My question is, how do I change channels on the N300 DIR 615 router so that I can get away from the interference caused by the wireless speaker system?
View 3 Replies View RelatedI recently set up my DIR-615 on my wireless netbook. Everything worked fine and I could get online. But then when I changed the password on the router, it bumped me off and now says Internet isn't available. My phone can connect to Internet but not my netbook anymore. When my netbook tries to troubleshoot it keeps saying "problems with router and adapter."
View 1 Replies View RelatedModem/router mac address changer .. i have globe wimax bm622i model, that needs to be change its mac address, hardly to find a right software, so i decide to manually config and do it by ms-dos commands, any related command for dos to change mac address of globe-wimax-bm622i-model.
View 1 Replies View RelatedI have a RCA modem from comcast high speed internet.Also have a Linksys Cisco Wireless-N Gigabit Router model # WRT310N V2. When I connect the internet directly into the computer, I get download speed up to 21.07 mbps and upload speed of 3.07. When I connect through the router download speed 1.31mbps and upload speed of 1.01.I have no clue how to make changes to the router.
View 19 Replies View RelatedI recently bought a tenda w548d Version 2.0 Adsl2+ Modem router. it worked fine with its default settings and wired connection was ok when i chose DSL uplink while installing its driver from CD. But it couldn't connect wireless. There were strong signals but connected computer couldn't get access to the internet. so i tried using ethernet uplink instead of DSL uplink while reinstalling the software Since then the light of ADSL never lights, even it never blinks. now the software on the cd can connect to the router. i cannot access its settings using IP address in browser, the page wouldn't load. I am so worried. Can i revert the setting back to dsl uplink?I can connect to the internet very smoothly using my old router so you can't blame my phone line or lan wire. I have tried reset the new router many times but still the ADSL light never lights up. And the ADSL light is ok because when i turn the router on, it lights with all the others.
View 2 Replies View Related