Cisco Switches :: SLM224G - Software Network Assistant For Switch SMB?
Nov 6, 2012Is there any management software as the Cisco Network Assistant for smb switch as SLM224G or SRW224G4-K9-NA, or only works with models 2960 and higher?
View 3 Replies
ADVERTISEMENT
Cisco Switches :: SGE2000 Not Recognized By Network Assistant
Oct 18, 2012I'm trying to get a network of SGE2000 switches mapped into Cisco network assistant.It always comes back with the device type unknown and status unsupported device.Is there a way to fix this ? I'm using Cisco network assistant ver.5.7(6)
View 4 Replies View RelatedCisco :: WS-C3560-48TS Network Assistant / Unable To Add A Switch
Oct 21, 2012I have a network running some 20 switches, two controllers and many AP's. All the devices that should be able to connect to cisco network assistant can successfully. However there is one switch that will show in neighbours but will give the message of “unable to connect to device” when I try and add it to the topology.
As far as I can see the config is identically to all other similar switches in the network. I can telnet from a switch (management VLAN) to the switch in question. However when I try to ping or telnet from the PC running network assistant (different subnet) I am unsuccessful. However I can ping/telnet to all other cisco device from this PC. The switch is a WS-C3560-48TS and I have included the config for firstly the switch in question and another switch of the same model and config that works correctly.
sho run
Building configuration...
Current configuration : 7363 bytes
!
version 12.2
no service pad
service timestamps debug datetime localtime
[code]......
Cisco WAN :: Updated 2950 Switch Software Which Caused Network Assistant Error
Jun 23, 2011I have two WS-C2950G-24-EI switches each of which were running software version 12.1(22)EA2-C2950-I6Q4L2-M. Both swtiches were viewable from Network Assistant version 5.6(3) and part of a community. I then updated the software on one of the switches to 12.1(22)EA14, and now Network Assistant will not add the new updated device to the community and gives an error of "WS-C2950G-24-EI is not supported as community member". Is the latest version (12.1(22)EA14) not supported by Network Assistant? The release notes indicate the Minimum Software Release is 12.1(22)EA4.
View 1 Replies View RelatedCisco Switches :: SG 300 Configuration Assistant
May 11, 2012I'm having trouble in connecting a SG 300 switch with CCA v3.2. I have already connected the switch with CCA, however I can't see anything in my CCA's Front Panel and Topology view. Here is the view of my Front Panel view after I connect the switch ?
View 2 Replies View RelatedCisco :: Network Assistant In PIX515E
Jun 25, 2006i have managed to create a community of cisco devices however although i can add the pix to the community it does not show up in the topology? HTTPS is enable. I can also access the pix via ASDM.
View 2 Replies View RelatedCisco :: Network Assistant With C4948E
Dec 27, 2012I'm experiencing considerable difficulties with CNA and my 4948E cat's. Front panel view, vLans and VTP utterly fail...and I have gone to GREAT lengths. I initially configured them all for comprehensive use in a vSphere environment. Storage switch fabric and multi-vlan guest networking. I wiped the config's across the board, factory reset all of them in an attampt to get CNA working. NO GO and it's been wildly frustrating, 80+ hrs spent with no results.
So is CNA truely compatible with the 4948e? And if so, WHAT IN THE **** AM I DOING WRONG!!?!?!?!!!!!?
Config and info:
C4948#show verCisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M), Version 15.1(1)SG2, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 1986-2012 by Cisco Systems, Inc.Compiled Wed 24-Oct-12 02:27 by prod_rel_team
ROM: 12.2(44r)SG11C4948 uptime is 22 minutesSystem returned to ROM by reloadSystem image file is "bootflash:cat4500e-entservicesk9-mz.151-1.SG2.bin"Hobgoblin Revision 21, Fortooine Revision 1.40
Last reload reason: Reload command
[Code]...
Cisco :: CNA 5.8 Network Assistant - CCO Login Not Working
Sep 19, 2012CNA 5.8(1)
32 devices
When I first launch the application, it promots for CCO login information, but then tells me the username or password is invalid. I reset it once, and it appeared to work. Next time I launched the application though, it gave me the same login error and did not store any of the device credentials. This is a new install of CNA and it just has one community setup on it now. I've tried 2 different CCO accounts and they both give the same login failure. I know the passwords I'm using are correct though.
Cisco :: Network Assistant MAC Search In Catalyst 2960
Feb 28, 2011Since I updated a Catalyst 2960 switch to IOS version 12.2(55)SE1 I can't do searchs by MAC address, when I do "Monitor->Search" the following error appears:"The software version of the selected switch does not support some of the CLI commands in read-only mode for this window. You must have read-write access to this switch to display complete information in this window" If packets are captured you can see that the issued command by the CNA host is "GET /exec/show/mac-address-table/", the answer from the switch is:"show mac-address-table ^% Invalid input detected at '^' marker.
If I do "Configure->Switching->MAC Address" instead I get the mac address-table correctly. In this case the issued command is "GET /exec/show/mac/address-table/dynamic" and no error is displayed, the answer from the switch is the list of mac-address table.
Cisco :: Network Assistant Failing IOS Upgrade On 2960s?
Feb 22, 20112950s work fine when upgrading the IOS using CNA. On all 2960s I get Failed to execute the command archive download-sw /overwrite /http iosFile
If I run the command using telnet and tftp server it works fine.
I have tried by deleting the old image then trying upgrade using CNA, but no luck
Cisco Infrastructure :: Can't Use Network Assistant To Connect To 2951 Router
Oct 22, 2012CNA version is 7.5(6)
router: Cisco 2951
error: unable to connect
are able to connect to other switches, such as 2970 questions:
1. is there any configuration needs to be done to connect to 2951 though CNA?
2. is 2951 supported device in CNA?
Cisco Switching/Routing :: 3850 Cannot Connect In Network Assistant
May 16, 2013With my brand new Cisco 3850 Switch, I got it configured with a LAN IP. Then, on my PC I opened up Cisco Network Assistant (version 5.8.5.1 which supports the 3850). I went to add the 3850 to the community by discovering the device, and was prompted with the user/pass box. The password I set was not allowing me to connect, and I realized it's because a username was required and I had not set up a username on the switch. So, I then configured an admin user with level 15 privileges on the switch. However, now when in CNA I try to add the 3850 to the community, it doesn't even prompt me for user/pass, it just says "unable to connect".
What do I need to do to add this 3850 to my community?
Cisco Switching/Routing :: 2948G - Can't Get Network Assistant To Connect
Feb 16, 2012I have a Cisco 2948G switch that I am trying to communicate to through this program. It has both an IP address and is hooked up through a cable. I can get Cisco Network Assistant to come up and ask for it's Username and Password, and that it is where I am stuck! I have no clue as to what to put in there as a username and password? I do have a password setup on the switch to login in to it during terminal mode, but that is it.
View 1 Replies View RelatedCisco :: Network Assistant 5.6 Support Aironet 1131AG Or 1131G
Mar 22, 2011Does the latest version of the Network Assistant support the AP1131AG / AP1131G model?
From the "supported device list" documentation it seems yes, but I've tried to import them into the map and received the message indicating that is not supported as a device...AP1242AG/1242G are not having this problem.
Cisco Switching/Routing :: Can't Connect Network Assistant To 2911 Router
Dec 30, 2012I am trying to connect my Cisco 2911 router to my community in CNA. I can see the routers on the topology map, but when I try to add to community I get an error message stating that the router is unreachable (Unable to connect). I can ping device from ame client. I can view Device Properties for map (Device type: CISCO2911/K9). Telenet attempt to connect but we only use SSH for connectivity (the same as all of my switches that are connected to community). 2911 is listed as a supported router on Cisco site.
View 3 Replies View RelatedCisco :: 2960 / 3750 - Windows Server 2008 Not Supported OS For Network Assistant
Apr 2, 2012why Windows Server 2008 is not a supported OS for Cisco Network Assistant?I am currently evaluating switch management solutions for use with Catalyst 2960 and 3750 series switches, and would like to be able to backup and restore configurations, as well as make configuration changes. My management Server is running Server 2008.Is Prime LMS my only option?
View 5 Replies View RelatedCisco Switches :: Create A Network With SF 300 - 08 Switch
Nov 9, 2012I want to create a network with the following switch SF 300 - 08.I am not use to GUI.I am having problems setting the settings.Currently, i have assigned each port with a vlan 1 to 8 for ports 1 to 8.How do i do an inter vlan with the GUI? Also, i want to restrict port 7 and 8 to certain ports only. Example:Port 7 and 8 can read port 5 and 6 but not others?
View 9 Replies View RelatedRouters / Switches :: Have A Spare Usb HDD And Wish To Connect To An Existing Network Switch?
Jan 13, 2011I have a spare usb HDD and wish to connect to an existing network switch (rj45 connections) if it works on a gigabyte network all the better
View 3 Replies View RelatedRouters / Switches :: Can A Workgroup Switch Makes Network Crash
Jan 30, 2011I work in a school department and wanted to hardwire two computers in my class using a workgroup switch. I only had one data port in my class. The tech guy told me the switch could cause the entire network to crash. Is that true? I thought a switch was just a passthrough device.
View 7 Replies View RelatedRouters / Switches :: Connect Win98 To ADSl Modem Over The Network Switch?
Apr 19, 2012Have one switch and network.PC number one have win98 and network adapter and connected to the switch.PC number two have winXP and network adapter and connected to the switch same as win98.Network works on win98 and winxp they see each other.internet working on winxp but dont work on win98
View 2 Replies View RelatedCisco WAN :: 877W Cannot Connect Using Configuration Assistant CCA
Apr 26, 2012Looking to setup a backup router for our disaster recovery plan. We currently have a Cisco 877W that was setup by our ISP. I can log into the device with Telnet and a console cable, but I am not good using IOS commands, so I would like to use CCA. Unfortunatley, I cannot access the router using the software. I assume something is disabled in the config. Like HTTP or something.
View 1 Replies View RelatedBelkin Routers :: F5D7632-4 - No Setup Assistant Software CD-ROM
Dec 29, 2012I've been given a F5D7632-4 modem router which is said to be in working order, but without the Setup Assistant Software CD-ROM. How can I get a replacement for this?
View 1 Replies View RelatedBelkin Routers :: F5D8233-4 Cannot Find CD Setup Assistant
May 22, 2013I have new Belkin router and giving old one to my brother. It is F5D8233-4. Can I install without the CD "setup assistant"?
View 1 Replies View RelatedDell :: V715w - Wireless Setup Assistant Installer?
Mar 22, 2013im trying to install a dell v715w all in one printer onto my macbook air, wirelessly. In order to do so the installation software says I need to download Dell Wireless Setup Assistant.
View 3 Replies View RelatedTP-Link 150Mbps- TL-WR741ND - Getting Proper Setup Assistant Software?
Feb 24, 2013Region : China
Model : TL-WR741ND
Hardware Version : V4
Firmware Version :
ISP :
My router box and the router itself are listed as 741N. I find no reference in the forums or on the website to this model. During setup, I can ping the router from the cmd prompt, but then it fails during the Easy-Setup assistant. I need to use the Easy setup because the language is otherwise Chinese, but it fails the network test. One of the two messages it sends are "Check the Model number". Is this a possibility? Is there a work around or where can I find the proper Setup Assistant software?
TP-Link 150Mbps Wireless :: TL-WR740N - Cannot Install Easy Setup Assistant Windows 8
Mar 23, 2013Region : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 4.23
ISP : GTPL
I recently bought Tp-Link wr740N model but when i run Easy setup assistant on my Windows 8 64bit, A Welcome page appears. When i click START button , a windows error comes out saying. TP-LINK Easy Setup Assistant has stopped working with following error
[code]...
Routers / Switches :: Setup An Home Network With A Wireless Router And Use Multiple Switches?
Jan 29, 2011I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
View 3 Replies View RelatedCIsco Switches :: SF 300-24P Don't Want To Add Another Switch
Mar 16, 2012I have a 300 series switch with VLAN1 untagged, VLAN 15,5,100 tagged. I want say ports 1-12 to use one uplink/trunk and 13-24 to use another uplink. All ports should have the same default VLAN1 and be tagged for 5,15,100. I'm trying to ease the load on two wireless uplinks(one is a Cisco 1242AG and the other is a UBNT PowerBridge.) I don't want to add another switch. Model: SF 300-24P
View 5 Replies View RelatedCisco Switches :: VTP And STP On SG300-28 Switch
May 9, 2011I have a question, does the SG300-28 support VTP and STP?. I want to add it to my network's VTP domain so I don't have to manage vlans manually on the SG300-28 and also be able to configure STP to keep my network loop free.
View 2 Replies View RelatedCisco Switches :: SF-302 Switch Connectivity
Jun 12, 2011i found that cisco small business SF302 PoE managed switch connect with the end device (RFID component) would causing packet drop issue.how should i isolate the issue and proper troubleshooting? would it cause by the PoE issue, or the 10/100 base etc.
View 5 Replies View RelatedCisco Switches :: VLAN With 2 Switch ESW - 520?
Jun 13, 2011For test I used 2 Switch that name "ESW X" and "ESW Y" I have 2 network that I named "Network A" and "Network B" I build 2 VLAN for each network that named Vlan 2 for Network A and Vlan 3 for Network B, I don't use Vlan 1 because it's the default Vlan
Configuration ESW X:
port e1 : ACCESS PORT on UNTTAGGED Vlan 2
port e2 : ACCESS PORT on UNTTAGGED Vlan 2
port e3 : ACCESS PORT on UNTTAGGED Vlan 3
port e4 : ACCESS PORT on UNTTAGGED Vlan 3
port g3 : TRUNK PORT with UNTTAGGED Vlan 1(default) and TAGGED Vlan 2 and Vlan 3
[code]....
Each Vlan can't communicate between the two switch, I think they're a problem in my vlan/port configuration?
Cisco Switches :: Configure SG 200-08 Switch To Act Like A Hub
Feb 12, 2013I would like to configure a switch to act like a Hub. I know about the mirroring port configuration, but unfortunately is not enough for me. Is it possible to do that with the switch that I have (i.e. SG 200-08) ? If not do you know a switch on which I can configure it like a hub (that mean no flow control between physical ports).
View 1 Replies View RelatedCisco Switches :: CCA Not Seeing UC560 Switch
Aug 29, 2011Have deployed a few of these - and am truly frustrated that I cannot see then in the topolgy, let alone actually manage them. Why such a ubiquitous switch is not supported.
Even the SmartPort utility is useless - CCA (3.3.1 and earlier) gives an error saying a port is incorrectly configured (I pluggged it into an exp port on the UC560 as I gave up trying to get a working uplink to an ESW-540-24P).
The Smartport port function wants the exp port (on the UC560) to be configured as a "Phone/Desktop" - if I try to change it to a "switch", it refuses to accept it saying the "Macro is unsuitable - or similar"