Cisco Switching/Routing :: L3 Reboots And Gives Error
Dec 11, 2011Almost every sunday L3 switch reboot and give following error message.
View 2 Replies
ADVERTISEMENT
Cisco Switching/Routing :: Random Reboots On WS-C3560G-48TS
Mar 7, 2012This switch randomly reboots throughout the day. I checked the stacks info and reported it was using crashinfo_12 (report below). I have access to the switch throughout the day if more config info needs to exported.
Cisco IOS Software, C3560 Software (C3560-IPBASEK9-M), Version 12.2(50)SE1, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2009 by Cisco Systems, Inc.
[Code].....
Cisco Switching/Routing :: 4507 Switch Reboots Automatically?
Mar 19, 2012working first time on switch 4507 , this is my 2nd week and i plug the console on this 4507 switch , the switch reboots automatically it comes to stage mention below and reboots. My question is i have not seen any error message on this switch and it reboots automatically so what is the problem.
* *
* Welcome to Rom Monitor for WS-X4013+ System. *
* Copyright (c) 1999-2003 by Cisco Systems, Inc. *
* All rights reserved. *
* *
**********************************************************
Rom Monitor Program Version 12.1(20r)EW1
Supervisor: WS-X4013+ Chassis: WS-C4507
[code]...
Cisco Switching/Routing :: 3750X Performance After One Member Reboots
Aug 6, 2012Pure 3750X-48PS ip base stack.One switch reboots from a power issue (possibly the master switch? Haven't confirmed yet in the 3 cases I've seen)The rest of the stack stays running fine (as it should), the rebooted switch rejoins the stack just fine
What I've observed after this scenario takes place is that network throughput on any port in the entire stack is severely degraded. Prior to the one switch rebooting, I can hit gigabit transfer rates going anywhere on any of the switches in the stack. After one member reboots by itself, I typically hit a transfer wall around 5-20mbps in one direction and sometimes better going the other direction. I've only confirmed this on 3750X stacks and I can replicate it every time. Newest code I've experienced it with is 12.2(58)SE1. I have not seen confirmed reports of this on older 3750 (E, G, plain) stacks of which we have a ton of.
Rebooting the entire stack so that all 3750X members are coming up at the same time solves the transfer rate issue every time. I would think there has to be a better way to get performance back to normal or prevent the performance hit in the first place.
Cisco WAN :: 2811 Router Keeps Cycling Through Reboots / Fatal Error
Nov 26, 2012I have a 2811 Router that keeps cycling through reboots. About 30 seconds into a boot, it shows the ALIGN-1-FATAL error(s) shown below. It then does a dump and reboots. This cycle just continually occurs.
Readonly ROMMON initialized
program load complete, entry point: 0x8000f000, size: 0xcb80
program load complete, entry point: 0x8000f000, size: 0xcb80 (code)
Cisco Switching/Routing :: 4500 Series Switch Auto Reboots
Apr 1, 2013We are facing cold start issue on 4500 series switch. The switch is restarting automatically almost weekly twice or thrice.As per show tech. output , there is "cold start log".Please find the attached logs for your reference.After time change , auto restart happening & am not found any log for power failure also.
View 6 Replies View RelatedCisco Switching/Routing :: 3750 - Switch Stack Reboots Every 24 Hours
Nov 12, 2011I have four-switch Cat 3750 stack that has been working reliably for a couple years. Suddenly the other morning it reboots itself, and has been doing so every 24 hours since. take a look at the attached log? This should really be a Smartnet thing, but as it turns out the warranty we have on this is not Smartnet .
View 6 Replies View RelatedCisco Switching/Routing :: Nexus 5K Primary Switch Reboots Failover
Oct 17, 2012We have Nexus 5K switches at the aggregation layer and VPC domain has been configured on them. VPC domain includes switches at the access layer as an identity.But when primary switch reboots failover didn,t happened. We are attaching architecture diagram for the setup along with show tech for Nexus 5K both switches.
View 2 Replies View RelatedCisco Switching/Routing :: Xerox 5745 Printer Reboots At 75% When Connected To 2960
Nov 15, 2012We are having a problem with our Xerox 5745 multifunction Printer. This problem had been forwarded to Xerox, but they claim that a problem was caused by a power surge on our Cisco router.
We are having a total of 8 CiscoCatalyst 2960 Series in our IT Communication rooms.
We are also having 2 Xerox 7120, 4 Xerox 5745, 6 HP5200 and 300 computers - PC (HP Desktop) and Laptop (Samsung). Network : all connected to CISCO Catalyst 2960 Series Printer Setup: IP Address: Manual IP Assignment (DHCP Disabled) PC Setup: TCP/IP –RAW on Port 9100 – SNMP Status ENABLED The two machines has same firmware software and configuration settings. one machine just been installed with latest firmware
Problem: On 3 Xerox 5745 display panel shows: "Network Controller booting"
at 75% the system restart and go on again and again.
This happens when cables are connected to CISCO Catalyst 2660.
Testing done: •1. No problem, Connecting directly to laptop using (crossover cable), accesss to printing is normal.•2. No Problem, Using other switch - dLink (not CISCO Catalyst 2960), the printing is normal.•3. Not work, changing ip address; disabling all protocol; changing speed to 10MBps.•4. Not work, Switching to other port on CISCO Catalyst 2960.•5. Not work, Re-starting the Cisco Catalyst 2960 s.•6. Not work, Changing cables.
Cisco Switching/Routing :: Catalyst 3750 Switch Reboots Because Of Stack Failure
May 14, 2008 The Catalyst 3750 switch reboots, and the " Reloading because of stack merge or communication failure" error message appears.
I saw this issue at "Cisco wiki" but the resolution in that page is just "Open a case with TAC". Because of the reasion is H/W Problem.
Is The resolution only one ? anything else? The 3750 does not use Stack.It is just stand alone. So i think it has other resolution as "disabling Stack" or another one. How about my opinion ? Is the Resolution only "Open a Case with TAC"
Cisco Switching/Routing :: WS-C3560X-24 Reboots - No Crash File And Clean Logging After Reboot
Apr 24, 2013I have a WS-C3560X-24 and attached to that are some 9 acces switches, for some weeks now my 3560 reboots some time what couse that the other 9 switches are down for some minuts as well and i dont want this of course. the reboot happens at random times and some times one week not and then like yesterday afternoon it rebooted again.
when i check the Flash directory there is no crash file and when i look at the logging its clean and just shows the startup. it's not the powersuply it's redundend and more L3 switches are attached to this power source and they dont reboot.
L3_AIM#sh versionCisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 12.2(55)SE3, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 1986-2011 by Cisco Systems,
[Code]......
Cisco Switching/Routing :: Input Error And CRC Error On Router 1841?
Mar 12, 2013The router 1841 is connected directly to the layer switch. the network diagram is below:
Office A --> Switch (L3) --> Router 1841 --> Internet --> Office B
However, when I transfer the file from Office A to office B, the speed very slow ( only around 40 kb/second), and there are an input error and CRC error:
Cisco-R1841#sh interfaces FA0/1
FastEthernet0/1 is up, line protocol is up
Hardware is Gt96k FE, address is 0019.e02f.03dd (bia 0019.e02f.03dd)
[Code]......
Modem Reboots Each Time On Switching Between XP And Windows 7
Feb 5, 2012if I am XP and online, if I restart into Win7, I have to power cycle my modem before I can go online. If I then restart any number of times into Win7, there is no connections problem. If I then restart into XP, then I have to power cycle the modem again. If I then restart any number of times into XP, then there is no problem. If I then restart into Win7, then I have to power cycle the modem.
View 1 Replies View RelatedCisco Switching/Routing :: POE Error On 4500?
Nov 16, 2009I'm seeing the following error on a 4500 running 12.2(46)SG
C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Module 5 inline power exceeds threshold: status changed to 'Pwr Over'
All the ports on module 5 have "power inline never" applied, in fact the whole switch has POE disabled.
I've attached a txt file with the show power detail output.
Cisco Switching/Routing :: Having Minor Error For WS-X45-SUP6-E?
Feb 15, 2012We are facing issue of having minor error for SUP module details below,SUP: WS-X45-SUP6-E see the minor error coming while troubleshooting this SUP 6-E error as below,
module 3: SerialNo :
Overall diagnostic result: MINOR ERROR#
Test results: (. = Pass, F = Fail, U = Untested)
1) supervisor-bootup ---------------> U
2) linecard-online-diag ------------> F
Cisco Switching/Routing :: Getting Error In 4948 Switch
Mar 13, 2013My cisco 4948 switch is generating the below error,how do i troubleshoot this error.
*Mar 13 00:09:33.451: %C4K_L2MAN-6-INVALIDSOURCEADDRESSPACKET: (Suppressed 14 times)Packet received with invalid source MAC addre ss (00:00:00:00:00:00) on port Gi1/37 in vlan 1Gi1/37- to this port another 2950 switch is connected by trunk link.and to this switch end host is connected i.e.thin client
Cisco Switching/Routing :: CF Error On 3825 Router
Jan 22, 2013After formatting the CF, the router is able to see the flash without a problem. I copied files to the flash - still able to see the contents okay. The problem ia that if i restart the router with the new flash, i get this error:
Jan 22 17:44:12.454 MSK: %SYS-5-CONFIG_I: Configured from console by bt_admin on
vty0 (10.10.10.44)
Jan 22 17:45:41.847 MSK: %SYS-5-RELOAD: Reload requested by bt_admin on vty0 (1
0.10.10.44). Reload Reason: Reload Command.
System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
[code].....
Cisco Switching/Routing :: WS-X6724-SFP - Getting Minor Error
Sep 20, 2012The line card WS-X6724-SFP inserted in slot 2 is getting MINOR ERROR. I could also see TestTransceiverIntegrity: on port no 2/11 has failed.
Is this a h/w issue?
==================================================================================================
S/w model : WS-C6509-E
IOS : s72033-adventerprisek9_wan-mz.122-33.SXI3.bin
==================================================================================================
1) TestTransceiverIntegrity:
Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
----------------------------------------------------------------------------
. . . . . . . . . . F . . . . . . . . . . . U .
Cisco Switching/Routing :: 3750X Duplicate IP Error
Apr 9, 2012I have just moved to the 3750X switch and have connected it to a 6509E. From the beginning I was having OSPF encryption errors, followed by flood warnings, LSA issue's, duplicate IP's which is baffling me.
There are no IP's which match on either switch however the 3750X was continually power recycling causing the interfaces drop continually.Even after disconnecting from the 6509 the 3750X continue to behave in the same manner. Could there be some issue with this switch?
Cisco Switching/Routing :: Getting Error Logs In 6509?
Feb 3, 2012%SYSTEM_CONTROLLER-SP-3-ERROR: Error condition detected: TM_DATA_PARITY_ERROR Feb 2 10:57:09.602 EST: %SYSTEM_CONTROLLER-SP-3-EXCESSIVE_RESET: System Controller is getting reset so frequently
Cisco Internetwork Operating System Software
IOS (tm) s222_rp Software (s222_rp-IPSERVICES_WAN-M), Version 12.2(18)SXF15a, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Mon 20-Oct-08 19:20 by kellythw
Image text-base: 0x40101040, data-base: 0x42951080
[code]....
Cisco Switching/Routing :: 3560C Amber LED But No Error
Mar 22, 2013I have a PS3 connected to a Gig port on my 3560. When I boot-up the PS3 I have to wait around 30 seconds for it to get DHCP.
I noticed the orange LED would stay on and go green after 30 seconds. I assumed I would have an error-state but I do not, the port show connected with no errors even though it's orange. I have no connectivity from the ps3 until the light goes green and then all is well. The port is access and I have manually configured duplex and speed.
Switch>show version
Cisco IOS Software, C3560C Software (C3560c405ex-UNIVERSALK9-M), Version 12.2(55)EX3, RELEASE SOFTWARE (fc2)
[Code].....
Cisco Switching/Routing :: 4507 FAN Sensor Error
May 13, 2013I have 4507 switch and I got the error of fan sensor which is mention below [code] What the meaning of FAN Sensor both are Bad/off ?
View 4 Replies View RelatedCisco Switching/Routing :: Message Error With C3750-I5-M
Jan 2, 2008I have this system: IOS (tm) C3750 Software (C3750-I5-M), Version 12.1(19)EA1d, RELEASE SOFTWARE (fc1
An error appear in console (many times in one minute):
Jan 3 16:25:37: %LINK-3-BADMACREG: Interface StackPort1, non-existent MACADDR registry for link 0
-Process= "<interrupt level>", ipl= 4
-Traceback= 20A364 187F04 58D6FC 58B950 2D7CE0 2E00C8 2E2BEC 2E2F24 2B0BF8
What is the problem? What is the solution?
Cisco Switching/Routing :: WLC 5508 - Error From Same Subnet
Jul 16, 2012Getting a lot of the following errors on our 5508 form the same subnet: 10.20.0.1 255.255.248.0 . I tried researching and not getting much.
broffu_SocketReceive: Jul 17 10:11:10.068: %DATAPLANE-3-DP_MSG: broffu_fp_dapi_cmd.c:2891 FP0.09:(7089389)[cmdAddIpv4:2921]failed to find ipv4 10.20.6.58
[code]....
Cisco Switching/Routing :: Error Log On 5500 Series?
Feb 3, 2012: %DATACORRUPTION-1-DATAINCONSISTENCY: unterminated string in buffer of length 129, counted: 129 -Traceback= 4027CB2C 402B1E88 4052884C 40528A48 40528D08 40529188 40529358 403247E8 403247D4
Cisco Internetwork Operating System Software
IOS (tm) C5RSM Software (C5RSM-ISV-M), Version 12.2(46), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Thu 26-Apr-07 19:41 by pwade
Image text-base: 0x40010948, data-base: 0x410F41D0
[code]....
Cisco Switching/Routing :: 3560 Goes To Error-disable
Jun 25, 2012I have port on cisco 3560 goes to error-disable,what is the cause of this issue,pls be noted this interface has BPDU Guard enable
View 3 Replies View RelatedCisco Switching/Routing :: Error Message On CAT4507
May 8, 2011I've taken 2 4507's fresh out of the box running CAT4500E-ENTSERVICESK9-MZ.122-53.SG2.BIN which was upgraded from CAT4500E-IPBASEK9-MZ.122-53.SG2.BIN
I'm getting constant %C4K_S2W-4-WRITECALENDARERR: Calendar write operation Failed errors on the console. I was also getting them on the original IOS version.
Anything I've seen say's to ignore them but their very frequent filling up the logs.
There's very little return on google and no bugs to report on Cisco?
Cisco Switching/Routing :: 6509 - Cannot Find Reference To Error
Mar 5, 2010This is a 6509 with Sup-2/MSFC2. Can't find any reference to this error on the cisco web site.
View 2 Replies View RelatedCisco Switching/Routing :: Giving Out Discard Error On 3750E
Apr 4, 2011We're seeing "OutDiscard" error on a LAN switch connected to newly migrated Cisco IP phones. All the other error counters are clean except for the OutDiscard. (please see attached "show int count err" output.) [URL].
According to the link above, the common cause of such discards can be to free up buffer space.(Am I seeing a switch buffer issue?) How to identify/resolve the cause of the OutDiscard.The switch is 3750-E running c3750e-universalk9-mz.122-44.SE6.bin
Cisco Switching/Routing :: 4507 Getting Error While Configuring A Switch
Nov 8, 2011I have a 4507 cisco switch loaded with two sup-modules.. [code]
View 5 Replies View RelatedCisco Switching/Routing :: 2960 PoE Failing - PD Removed Error
Nov 11, 2012I'm facing a problem where certain port on my swtich keep grant and remove poe.
Nov 12 07:02:43.639: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/18: Power granted
Nov 12 07:02:44.399: %ILPOWER-5-IEEE_DISCONNECT: Interface Gi1/0/18: PD removed
[Code].....
Cisco Switching/Routing :: 3560G Found Error And Not Able To Recover
Mar 2, 2012on IOS versions higher than 12.2(50) on Cisco 3560G-48TS I get this error/traceback, when I reach a certain number of Access-lists group'ed to "interface vlan", and the ACL inserted in the TCAM reaches acl label #128 (can be seen with : Show platform acl label 128)I can see errors in the TCAM if I issue the command
View 21 Replies View RelatedCisco Switching/Routing :: 3745 / %ERR-1-GT64120 (PCI-0) / Fatal Error
Nov 3, 2011I have a cisco 3745 router ,It has been working OK till this morning when it failed to boot this is the error that i get:
%ERR-1-GT64120 (PCI-0): Fatal error, CPU out of range error
GT=0x24000000, cause=0x0900E083, mask=0x0ED01F00, real_cause=0x08000000
--------------------------------------------------------------------
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------
bus_err_high=0x00000000, bus_err_low=0x083259C0, addr_decode_err=0x00000470
r0 = FFFFFFFF r1 = FFFFFFFF r2 = 0 r3 = 658A0000 r4 = 0
r5 = 1 r6 = 0 r7 = 0 r8 = 0 r9 = 4ECAB4A0
r10 = 0 r11 = 200 r12 = 0 r13 = 668BDF84 r14 = 0
[code]....
System returned to ROM by error - a System Error, PC 0x607DD5C0 at 11:06:37 ARG Fri Jun 15 2012 System image file is "flash:c3745-adventerprisek9_ivs-mz.124-15.T5.bin" Possible RAM fault?? not performed any modification.