Cisco WAN :: How To Replace Fan In 2811 Router
Nov 12, 2011How to replace fan incisco 2811 router in live or down condition?
View 2 Replies
ADVERTISEMENT
Replace DGL-4100 With Which Router?
Nov 9, 2012My home router is an aging D-Link DGL-4100 and I am looking to replace it.My max budget is ~$250 USD.
I use 2 Ubiquiti Unifi UAP-Pro APs in my home for WIFI access, so I have the WIFI aspect of my home network covered completely. All wiring in my home is either Cat5e or Cat6, my switch is a gigabit HP ProCurve 1810G-24, and my cable modem is a Motorola SB6120 (Comcast cable broadband). I have 7 IP cameras (security system), 4 streaming media players, several PCs, a server, and several other network connected devices. I am the only resident.
I am looking to maximize my WAN to LAN (& LAN to WAN) throughput while maintaining a very secure network. I also want the router to have reliable VPN. If it is a wireless router, I would most likely not utilize the WIFI feature, probably turning off the WIFI radios and just use the router functionality.
I don't have the time/patience to build a PFSense (or similar) box and learn the software, so am only considering an off-the-shelf solution. Yes I know that PFSense and Untangle are great, I simply don't have time to learn them presently or in the foreseeable future.So, which router for wired performance and security would you recommend?
Cisco WAN :: Replace Our 3825 Screening Router
Mar 25, 2012We use a 3825 router to screen alot of the junk from the internet side or our firewall. Its worked well for the last 4 years buthas rebooted multiple times in the last month for no apparent reason.At this point I think I would prefer to replace it.Our current internet link is 100Mbps and this router handles that quite well. Is there an equivalent that I should replace it with, or should I just buy another 3825 ?One with an OOB management port would be nice.
View 6 Replies View RelatedCisco WAN :: Need To Replace Router 831 With High End Model
Jul 19, 2011Our one of the Client need to replace CISCO 831 router with high end router , there will be around 60 to 70 users accessing this router for Internet surfing. Right now 831 having 3 Ethernet and 4 Fast Ethernet Ports.
View 4 Replies View RelatedCisco VPN :: Pix 515E - Replace With Another 3845 Router?
Nov 18, 2011in my lab environment, I have a site-to-site VPN between a Pix515E and Cisco 3845 router, using AES-256/DH-5/SHA for isakmp and AES-256/SHA/PFS group5 for the site-to-site VPN, I can only push about 26Mbps IPSec traffics (tested with Iperf). CPU on the Pix515E is running at 96% utilization
Now if I replace the Pix515E with another Cisco 3845 router, I can push about 100bps. Why such a big difference between the data sheet and actual real world
[code]...
Replace Linksys WRT54G Router
Nov 15, 2012I had an issue yesterday with no internet access on my desktop computer; the message said "Network cable unplugged" so I called AT&T tech support for assistance. I have 2 Dell computers; a desktop and a laptop which I use wirelessly in the house.After doing several things from disconnecting the router to try and determine if the problem was with my router or an ethernet cable AT&T determined a port on my router which is 6 years old could be going bad and recommended I replace my router.I contacted Linksys yesterday; spoke to tech support for my WRT54G router and was given 2 model recommendations. One was a Model E900 N300 and a more expensive model; an EA2700 N600. There is a price difference of $40.00 USD between the 2 models. I could probably get by with the E900 N300 for $49.99 but the guy at Linksys was putting the pressure on me to buy the more expensive one for $89.99. I told him I'd have to think about it.
View 5 Replies View RelatedCisco WAN :: 7606-S Router - Replace SUP32 With RSP720?
Sep 29, 2012I have a 7606-S router ( non redundant ) with SUP32 and i wand to replace it with RSP720-3C-GE , i am asking about the procedure?
-shall i switch off the router ? or just removeSUP32 and insert RSP720 ?
-are there any steps should i do before the upgrade ?
-i am planning to take the router out of service during the operation, how much down time it will be ?
Cisco Switches :: SLM248P To Replace Router As Switch Is Not Working
May 9, 2012I am in the process of trying to replace a modem/router,the switch does not work with the new modem/router although if I connect the modem/router directly to my computer it works fine,so its not a router issue.I suspect that the settings need to be changed in the switch to allow the new router to work ?
View 1 Replies View RelatedCisco WAN :: 1921 To Replace Current Router Which Is Constantly Freezing
Jan 18, 2013I have a Cisco 1921 to replace our current router which is constantly freezing. We have a couple inside servers, one is a web server and application server which needs to be RDP'd to by a couple of clients outside of our network. I cannot get this to work no matter what. I know it's not the server's setup as when I plug the network back into the old router, it works just fine.
All clients have access to the internet, and I can successfully ping/resolve hosts from both the router and a client computer connected. I cannot, however, rdp using neither our public IP, nor our hostname. The hostname does resolve to our ISP assigned IP, but the server cannot be contacted, leading me to belive this is a NAT issue. [code]
Cisco WAN :: Replace Modem With 2621 Router With WIC-1ADSL Module
Dec 26, 2012I have a Cisco ASA5505 with Frontier ADSL. I broke into their crappy little modem and obtained the settings needed to replace their modem with a 2621 router with a WIC-1ADSL module. I have a static IP from Frontier which is on my ASA5505 and the Dialer interface on the 2621 gets its address from Frontier via DHCP. There are devices behind the ASA which I need access while in the field, IP Cameras, Seed Treater, etc., so I have Anyconnect running on the ASA and can access everything from my laptop, iPhone and iPad from whereever. The issue arises when my laptop is in house and communicating with my parent company and I try to make a cell phone call off the network extender. The call is choppy since there is no QoS and the data is strangling the voice. Since I have control over the 2621, I added another network and NAT it into Frontier without them knowing. I have since placed the network extender on this network as well as a WAP200 that is wide open for my customers when they are in the office. Doesn't fix the problem but...
I have now added Evertek Wireless internet with a static IP also but they use a reservation based on the MAC Address of my interface of the ASA. This plugs directly intot the ASA via ethernet (I would assume their antenna is just a wireless bridge). I set route tracking on the Evertek side and use the Frontier as a backup and all devices on my NAT network still funcion on Frontier DSL and all my nornal data traffic is out Evertek. The issue is that the Evertek Wireless is not very fast or reliable (today in during a snow storm, it could barely keep an internet connection). And I had a problem with Anyconnect using either connection. I got that working. But think that the "ip address x.x.x.x y.y.y.y dhcp setroute" on the Evertek side messed things up from a routing standpoint when I would connect from the outside on the Frontier side. For testing, I switched the tracking around and now the connection on the Frontier side does not work but that is besides the point.
Frontier is going to try out an ADSL/2 connection next week which brings up another issue; all Frontier connections come into my buidling on a single 4-pair wire so if they go down, all my internet except the Evertek goes down. I have a Raven Slingshot coming for installation shortly that cannot go down; it will provide RTK (sub-inch accuracy GPS) to my customers that have auto-steer and auto-shutoff capabilities in their tractors via cellular data modem. So, while they are planting their crops in the field, if my connection goes down, their tractor will not function.
I also had a Cisco UC320W but it died a few days after it went off warranty so I replaced it with a Dell Server running 3CX IP PBX that supports Cisco SPA525G2 and SPA501G IP Phones. There is a 3CX iPhone app that allows me to receive calls while in the field, it uses a proprietary tunnel that I have open on the ASA. With 4-pair coming into my building, I will be left with a single 1-pair for phones so I am considering a SIP provider instead.
Can/should I move the Evertek ethernet to the third ethernet interface on the 2621 and track the Frontier DSL against the Evertek (backup) on the 2621 side and use the ASA to track the ADSL/2 against the 2621? Should I acquire an 1841 (or some other device that suppports the HWIC) with a ADSL/2 card and use HSRP between the 2621 and 1841? Is that even possible?
Cisco Switching/Routing :: 2651 DSL Router - Replace To 2801?
Dec 30, 2011I have a 2651 that has an adsl1-wic that I am using as my DSL router. I recently acquired a 2801 that I want to replace the 2651 with. I configured the 2801 the same way as the 2651 but on a reload I get the statement that says
Setup: New interface NVIO placed in shutdown state
When I do a show interface all of the interfaces show up except the NVIO and I don't have any connectivity to the outside world. I am using Nat since I have a /29 and using nat pool overload. What am I missing? I am running IPVOICEK9-M 12.4.25c on the 2651 and adventerprise 12.4.24.T on the 2801
Replace Speedtouch 330 Modem With Netgear Router Dgnd3700?
Dec 16, 2012install a new N600 Wireless Dual Band Gigabit ADSL2+ Modem Router - Model DGND3700, to replace a Thompson Speedtouch USB Modem.
PC Windows XP Home Premium Media addition - Main PC X2 Laptops Win7 & Vista - fully working on wireless no issues.
I have managed to get two laptops working wirelessly with no problems, my main problem is the master pc needs to be able to use this router as well, but I cannot get it to work via the Ethernet cable!! I can get to to the Routers config page, I have done the following:
unplugged and removed the speedtouch modem, the old dial up connection is still available on the pc along with the speedtouch software and driver, I left this in place just in case the pc needs to revert back to the speedtouch modem, if I am unable to resolve this issue.
I have set the ip address on the PC to static and input the relavent Subnet and Gateway I can ping the Routers address 192.168.0.1 even though I have reserved the PC's Mac address and IP Adress I am unable to get to the internet. I have tried setting up a new internet connection via windows wizard.
when i look into the nework connections section in windows the local area connection is 100mb and there seems to be another connection which looks like another internet connection this indicates I am connected however I still cannot get an actual google session running.
Linksys Wireless Router :: Replace WAG54GS Gateway With EA6500?
Jan 4, 2013I am looking to replace my current WAG54GS Gateway with the EA6500. Problem is the new one does not have a built in ADSL2+ modem (I am in the UK and my ISP is Demon Internet). I therefore need to purchase a separate Modem to connect to the router.
View 9 Replies View RelatedLinksys Wireless Router :: To Replace Dying Netgear FWAG114
Sep 6, 2011I need to replace a dying Netgear FWAG114 wireless router, and the E4200 gets good reviews so I've been looking into it. I'm a software developer running 6 servers plus 3 laptops and 5+ other devices (iPad, Wii, Droid phones, BluRay...). I prefer to use a trusted PC list (enter MACs for all trusted devices) rather than WEP or WPA - is this available with the E4200?
I don't need VPN, but I do run a number of web servers, app servers and databases, so port forwarding is important - I notice the E4200 provides port range forwarding and single port forwarding - I assume this replaces the Rules and Services feature in Netgear - right?
Do you see any potential problems, given my needs, in using the E4200?
Linksys Cable / DSL :: Wag320N Modem Router To Replace Two Wire Device
Mar 14, 2012I've recently bought a wag320n modem router to replace the two wire device fitted to my bt business broadband. This router supports a guest network..
View 1 Replies View RelatedLinksys Wireless Router :: E1500 What Is Best Notebook Card To Replace Broadcom
Jul 13, 2012I own an HP Pavilion dv6 Notebook PC and recently purchased a Cisco E1500 to replace my aging WRTG54 wireless router. Since installation of the new router I keep getting dropped from my LAN and the internet with "connectivity issues" ... this only occurs on my notebook PC and not the other wireless devices I have in my home. I’ve done some searching on the internet and this seems to be a generic problem with the Broadcom 802.11b/g/n card the notebook uses. I have 2 questions:
1) Is there an easy way to adjust either the card or the router to deal with these issues and if not then
2) what is the best notebook card to replace the Broadcom with to assure these issues go away.
TP-Link ADSL2+ Wireless :: Setting Up W8968 To Replace Router Given By TM For Unify Connection
Feb 24, 2013Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : TM
I am having difficulty setting up the W8968 to replace the router given by TM for the Unifi connection.I tried updating the firmware of the modem router and used quick setup to configure the device as a wireless router using PPPoE, but still couldn't connect to the internet using the WAN port.I noticed there was a guide for TD-W8960N to set up TM Unifi but the web interface is too different from the W8968 interface.
Linksys Wireless Router :: WRT54G Replace XP Machine With Wired Desktop Running Windows 7
Apr 28, 2010I have a Linksys WRT54G router; have a cable internet connection through the router; and two wired desktops, one running Vista (32-bit) and the other XP. I would like to replace the XP machine with a wired desktop running Windows 7 (64-bit).
View 8 Replies View RelatedCisco WAN :: 2811 - Configuration Of Router And BGP
Nov 8, 2011I want to configure BGP but i am finding it very difficult to know BGP as I am new to this concept.
What is theoretical and practical approach to configure bgp??
I have to configure my office router 2811 for two ISPs which will be acting as fail-over.
I have to start it from scratch.
Cisco WAN :: 2811 To Enable Ssh On A Router
Jan 3, 2012I just bought an additional router for my network and I'm in the process of setting it up.I have however hit a snag with enabling ssh on the device. It is a cisco router 2811 running IOS 15.0 (refer below to my attempts)
View 3 Replies View RelatedCisco WAN :: 2811 Router LAN Ports?
Jun 14, 2012how many extra interface port can be plugged in to the 2811 router ,there are 2 fixed FE port on this router and i have 3 connection i.e one mpls link , one internet link and one sip trunk .. some body confirm me that i can insert module in 2811 ?
View 5 Replies View RelatedCisco VPN :: 2811 - Second ASA Not Connecting To Router
Aug 25, 2012when I got past my current hang up, I marked the thread as answered, so I wasn't sure if I should start another or continue on...
I've tried going through that troubleshooting doc, but I still can't figure this out.
When turning on debug for the 2811, I'm not seeing any thing.
show debug
Cryptographic Subsystem: Crypto ISAKMP debugging is on Crypto ISAKMP Error debugging is on Crypto IPSEC debugging is on Crypto IPSEC Error debugging is on
#show crypto sessionCrypto session current status
[Code].....
Cisco VPN :: 2811 - AnyConnect SSL VPN On IOS Router
Mar 6, 2013 I configured Any Connect SSL VPN on Cisco 2811 router. It works perfectly when I lo gin via web and run secure mobility client. However, when I connect directly from the mobility client connection fails. It does not even ask me for username and password.
----------------------------------------------------------------------------------------------------
Mar 7 21:36:47.613: %SSLVPN-5-SSL_TLS_CONNECT_OK: vw_ctx: UNKNOWN vw_gw: VPN_GATEWAY i_vrf: 0 f_vrf: 0 status: SSL/TLS connection successful with remote at
Mar 7 21:36:47.617: WV: sslvpn process rcvd context queue event
Mar 7 21:36:47.621: WV: sslvpn process rcvd context queue event
Mar 7 21:36:47.745: WV: sslvpn process rcvd context queue event
Mar 7 21:36:47.749: WV: Entering APPL with Context: 0x49233618,
[Code]........
--------------------
I have not figured out yet, why mobility client works when launched from the web and why it does not work directly.
Cisco WAN :: How To Configure 2811 Router As BGP
Sep 19, 2011I have cisco 2811 router and two ISP copper line. How can configure it as BGP router.
View 11 Replies View RelatedCisco WAN :: Throughput With Tac 2811 Router
Feb 10, 2013We currently are using 2811 router for internet Via IPSEC tunnel.Download speed is 30 Mbps and Upload speed is 6 Mbps.
But we are getting not more than 4 Mbps download speed. We did open Tac case and as per Tac 2811 router is not for 30 Mbps.Can any suggest proper model. We need 2 FastEthernet/Gig and one serial port.
Cisco WAN :: 2811 - Upgrade Router
Jan 9, 2012I am looking to upgrade a 2811 router to 15.1.2T and see in the release notes that this image is only compatible with the "C Series" older ISR routers? What is a "C Series" ISR and how do I know if I have one?
View 4 Replies View RelatedCan Mac Address Replace Ip
Sep 4, 2012Can mac address replace ip (yes or no)
View 1 Replies View RelatedProtocols / Routing - Replace The Cisco Pix?
May 14, 2011I have a small network (10 computers) with 1 SBS 2003 domain controller.There are 3 cables plugged into the Cisco PIX...
>One ethernet cable to our switch
>One console cable plugged into our server
>And of course the power cable
I need to , but I noticed something I've never seen before.... When I unplug the CONSOLE cable our Internet shuts off.I would expect that of the ethernet cable, but not of a console cable.I'm an experienced network tech, but not a Cisco guy. Am I missing something? Is this type setup typical of a Pix?
Cisco WAN :: How To Replace ROMmon On 2620
Jun 23, 2012I think that my rommon image has become corrupt as it will not take a new IOS image. I have tried several images that are within the recommended size and work with another 2620 with exactly the same specification also some commands that are available are not recognised when typed
View 7 Replies View RelatedCisco WAN :: 837 - Replace Dialer 1 Interface With IRB?
Jun 21, 2011I have an 837 ADSL router that the customer is upgrading from a 3 meg circuit to a 10 meg circuit.
The previous vendor used PPOE for connection and we used a dialer 1 interface to make the connection with a user name and password.
The new connection is a straight WAN DHCP no username or password needed.
I realize I can change the dialer interface from negotiate to DHCP but do I still need it ?
Can I replace the dialer 1 interface with IRB ? Should i just keep the Dialer 1 interface since the device is currently set that way and just remove the PPP negotiation from dialer 1 ?
Cisco WAN :: MGX 8850 PXM-HD To Replace With Faulty HDD
Feb 3, 2011I have MGX 8850 (PXM45/AXSM) and I want replace My faulty hard disk 40Gbps (4200RPM) whith other hard disk 80Gbps (5200RPM).Is it possible or No?
View 1 Replies View RelatedCisco :: Upgrade A Router From A 2811 To A 3945?
Nov 10, 2011I need to upgrade a router from a 2811 to a 3945.
2811 has the following modules:
Cisco WAN :: 2811 Router Not Booting Properly?
Dec 16, 2010I am using a cisco 2811 router.It is not booting properly.It reboots continously by just decompressing the image repeatedly..
View 2 Replies View Related