Cisco Wireless :: 2602 AP In Stand-Alone Utilizing Both Bands?
May 12, 2013
We typically use the 2602 series AP in lightweight mode, however I have a scenario where we are going to be installing one with the stand-alone software. I understand that we will not be able to utilze certain features that you get with the WLC such as RRM, rogue detection, and clean air.
We do want to utilze both the 2.4GHZ and 5GHZ bands. In order to do this with the 2602 stand-alone AP, will we have to configure 2 separate SSID's? I really do not want to do this to if I do not have to to minimize confusion for clients.
View 8 Replies
ADVERTISEMENT
Feb 29, 2012
We have the Linksys E4200v2 router. We have two servers on our network that we want to access remotely (from outside). We have two Static IPs from our ISP. We currently utilize one of those IPs to access one of the servers-no problem. How can we utilize the second IP to access the second server?
View 3 Replies
View Related
Sep 9, 2012
I found a few older forum posts and documents online discussing how to create multiple SSIDs on 1 1252 AP using the WLC and they state that VLANs are needed for the interface and then I've read that multiple SSIDs on 1 interface are also possible. I'm not sure on how to actually configure this. I would like my 2.4Ghz radio on the 1252 to be associated with the current SSID in production and the 5Ghz band associated with another SSID that's in production. I couldn't find an option in the WLC or anything stated in the documents I've read about how to associate the radio band with the SSID.
View 5 Replies
View Related
Apr 25, 2013
I have a WRT320N, firmware version 1.0.05., Windows 7 Home Premium SP1, and a Hewlett Packard laptop.I would like to utilize both bands on my router at the same time for internet access, so that I can have the one my kids use shut down at a certain time but mine stay up.If not, what's the closest I can get, even if I have to purchase additional items to do so? Do I have to manually turn their band off when I want it off? And can I even have both bands in use at the same time?
I looked at my Cisco online info by access the IP address. I see the Access Restrictions tab. Can I even set usage by specific computer? If so how do I do that?
View 3 Replies
View Related
Jul 25, 2011
I just picked up a E4200 last nite and installed it and everything seems to be connecting ok, but I'm just not sure I have the optimal settings. This is my first dual band router.I have a mixture of G and N devices on the network - notebooks, desktop, phones, Wii. etc.What are the best settings for each of the 5 and 2.4 bands? I have read that you want to have the same SSID and encryption keys, so clients can go from one or the other seamlessly. It's mostly the Basic Wireless Settings that I want to get straight. Right now everything is on Mixed and Auto, and I'm not sure that's entirely correct.
Also, does anyone have any recommendations for a PCI and USB wireless adapter that works well with this router and provides the best range and throughput? I have both a laptop and desktop in a detached building with no physical cables. I want to ensure these have the best connection possible.
View 2 Replies
View Related
Sep 22, 2011
I have just installed the Cisco E2500 router and setup my wireless network.I bought the router hoping it would give me a stronger signal than my old Linksys G 2.4Ghz.Using inSSider I can see my router and unfortunately it looks like both the 2.4Ghz and the 5Ghz are both operating at the same time. . The signal stregth under RSSI is -60 for the 5Ghz and -57 for the 2.4Ghz.Do I need to switch one of these bands off or what do I do to get a stronger signal?....my old Linksys router was at -50.Where does one switch off a band anyway?
View 7 Replies
View Related
Feb 19, 2013
I have a problem converting 2602 from lightweight to autonomous. It will not boot to the autonomous IOS. The procedure below is waht I did.
ap: set IP_ADDR 10.0.0.1
ap: set NETMASK 255.255.255.0
ap: tftp_init
[Code].....
View 28 Replies
View Related
Mar 7, 2013
I have an 2602 AP. Recently I tried to move it from one controller to another, however in doing so the image must have gotten corrupted. So no I'm in AP ROMMON. I can't find any recovery procedures specifically for the 2600's, but I what I did find doesn't seem to work :
ap: set IP_ADDR 10.4.208.3
ap: set NETMASK 255.255.255.0
ap: set DEFAULT_ROUTER 10.4.208.1
[Code].....
View 1 Replies
View Related
Feb 3, 2013
We have a campus with both office and industial areas with various propagation problems. Historically I have been installing and maintaining access points in the 1200 range, the latest being the 1242. All these have a similar antenna setup based on diversity pairs.Since Cisco seems to be dropping the old series any week now I have been looking at the 2602 as a replacement.I can find no good documentation on antenna selection and mounting suggestions for these.If I want a proper omni coverage pattern with dual band antennas, do I just set them to a H form assuming the unit is sitting on a wall?
View 1 Replies
View Related
May 28, 2013
i'm configuring a standalone AP 2602 with IOS 15.2.When i connect to AP from my notebook i only get 65Mb speed, when i connect to other APs from the notebook my speed connection 150-300Mb.
What configuration(CLI) do i need to be able to connect to the AP on connection speed to 130-450Mb ? Currently I connect to SSID with WPA2 encryption and "speed default" on radio 0 interface.
View 7 Replies
View Related
Apr 3, 2013
Instead of stocking every known AP and every external connector, I would like to query which APs to stock for general site surveys....
I have 2 customers that will require surveys in the near future...one plans on using the 2602e AP, and the other a 3602e AP. I have read somewhere that the 1140 makes an excellent proxy for the 2602 and several other Cisco APs (as the RF characteristics are similar) so that I only have to stock that one AP to use for those site surveys- but I haven't seen any recommendations about the 3600 series AP yet...
What AP to stock for doing Cisco site surveys? Maybe one or two models only?
View 10 Replies
View Related
Apr 21, 2013
I have a problem, where we are installing a Cisco 2602 access piont, the AP is getting power as the lights are on (changing colors Green, White, Red). In the switch side the LED for the interface is blinking green only when I chosse PoE. Also I cannot see the AP in CDP neighbours.
It seems to be a physical problem but the cable is tested and showing connected for all pairs and parallal (straight) connection.
Access Point was connected directly to the same interface (I mean with a patch cable to the switch) and working
View 4 Replies
View Related
Apr 14, 2013
it seams, that the mounting blade for the 1142 access point and the 2602 access point are identical.
We have ordered the new 2602 with internal antennas for deploying WLAN in a new building, but I never hold this accesspoint in my hands. We have a few mounting blades in spare from the 1142 accesspoint. The question is, can I prepare the mounting of the 2602 access point with the 1142 mounting blade?
View 2 Replies
View Related
Dec 13, 2011
When I have both 2,4 and 5,0 GHz band enabled on the E4200 router my PC (WMP600N-PCI adapter) has max. 130Mbps.When I enable only the 5,0 GHz band it has a speed of 270Mbps.The same speed issue with my Dell laptop.Router and PCI adapter are new (3 days old) and both have the latest firmware.Both PC and laptop are running on W7.how to increase the speed with both bands enabled?
View 6 Replies
View Related
Apr 4, 2013
I have several 2602 AP's that I want to operate in FlexConnect mode. The WLC is at a central HQ and the Ap's are remote. There are central radius servers at the HQ for the wlans. At the remote lcoation, there is a local radius server we want to use for the primary radius server for these AP's. This radius server has been added to the WLC. I have setup a FlexConnect Group, designated the the primary and secondary servers, and then added the AP's to the group. It does not look like radius requests are being sent to the local controller.
For this to work, do we have to check the box under the wlan for FlexConnect Local Auth? Currently, we only have FlexConnect local switching selected.
View 8 Replies
View Related
Mar 24, 2013
Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : Build 121225 Rel.37950n
I have low signal range from this WDR4300 router on both bands and especially on 5Ghz i lose my connectivity on just few meters away from the router and on other rooms in my 80m2 apartment, i also own another tp link 740n with only one antenna and the range is better with it almost covers all my apartment. Router has been reset after being updated to latest firmware and tried different configurations but im not satisfied with the signal range. Is there something i can do.
View 1 Replies
View Related
Sep 12, 2012
I am trying to configure this newly purchased AP to be used for WiFi surveys, heatmaps, etc..
I cant seem to get to the web interface of the AP to make config changes, even though it is picking up an IP via DHCP and it is pingable.
View 2 Replies
View Related
May 10, 2012
I have a customer with several older Aironet 1121G WAP's. In one area of the plant the noise levels from several large motors is preventing reliable connection to the WAP, even though it is located in the same conference room as the users. I am suggesting upgrading the 1121G to the 3502I to take advantage of the Clean Air technology. This raises two questions:
1) Will a single 3502I be able to effectively handle the RF noise, or does it require a network of WAPs to function properly?
2) Does the 3502I require the CT2504 controller for the Clean Air to work, or will it function in a stand alone mode?
View 8 Replies
View Related
Apr 8, 2012
Cisco Aironet 3602I is stand alone or need a controller ?
View 8 Replies
View Related
Sep 12, 2012
I have some old 1231 APs in the school in which I work.I would like to create a local network (no LAN, no internet, just a point to point wifi connection) managed by the access point (in DHCP).That's because we have an apple TV connected to a projector and some ipads. My idea was to put the devices locally in the same closed network for share via AIR Mirror the ipads on the apple TV.
View 3 Replies
View Related
May 2, 2012
We are deploying a new office and exploring the options for WLAN deployment. We were pretty impressed with 3500 series APs and that it supports CleanAir.However, we have decided to go for standalone AP deployment model now. As 3500 does not work in standalone mode, so we are looking for APs that can work in standalone mode ( and later can be converted to lightweight if needed). We can go for 1140 in that case. However, it would be better for us to know the main differences between features supported by 3500 lightweight AP and 1140 standalone AP. CleanAir looks like the main one. Are there other important ones as well?
View 2 Replies
View Related
Jun 15, 2011
IPods and IPads to connect to stand alone AP1131? My scenario is as follows:
There is a section of a campus that is covered by 14 stand alone AP1131 were I experience the problem. The security parameters are: 802.1x, wpa enterprise, tkip
The other section is under WLC also AP1131 but in this case in WLANs/Scurity/Leyer 2 I checked boxes:
WPA Policy, WPA Encryption TKIP
WPA2 Policy, WPA2 Encryption AES
Auth Key Mgmt 802.1x
Wonder if the fact that I chose WPA2, AES makes a difference with stand alone mode? Anyways I tried configuring AES in stand alone APs and it didn't make a difference since I could not connect either.
View 9 Replies
View Related
May 26, 2012
i run a web server out of my home hosting a website that can get several hundred people visiting simultaneously. im currently attempting to upgrade my DD-WRT flashed WRT54G V2 router with a cisco rv120w in order to sustain more simultaneous connections (existing router locks up after a few hundred). due to the amount of spam i get on my forum, particularly from IPs originating from asia pacific networks, i block all access from those IPs utilizing the IP address and CIDR. the rv120w has starting IP and ending IP to apply a rule to, but id like to block using my existing addresses from asia pacific networks with their applicable CIDR.
View 1 Replies
View Related
Jun 8, 2013
I am having a bit of trouble with the following scenario; I have two 2901 ISRs and a 2924XL setup in the following fashion.
2924XL--->P2P-Fiber--->2901ISR--->P2P-Fiber--->2901ISR
I need to be able to reach the LAN 192.168.1.0 from 192.168.3.0 for TS but cannot get this to work. I can ping from within the switch all around and i can ping from within the woodlawn router all around but cannot ping host to host.
View 20 Replies
View Related
Mar 8, 2011
I had an interesting issue utilizing a monitoring software for our routers and switches. The monitoring tool indicated a few switches were down, however was unable to ping or telnet into them from the computer I had the software installed on.
View 2 Replies
View Related
Feb 14, 2012
We have an Cisco Aironet 1130AG access point which is deployed as Stand Alone Access point, connected to Cisco 2960 Switch.Now we want to configure an Guest Wifi Access for guest users , for accessing internet ,Is it possible to configure Guest wifi for stand alone access point,( Bcoz i created in WCS, i am not sure about stand alone), i read in articles like create new vlan for Guest account & assign it like that , but not clear.
View 7 Replies
View Related
Jul 17, 2012
I want to configure 5585x Active/Standby with 2 nexus switches utilizing VPC technology. New ASA 8.4 supports etherchannel so I want to plugin 2 cables from ASA1 to sw1 and sw2 and 2 cables from ASA2 to sw1 and sw2? Is this a valid design? how would I configure that? Any design document on that?
View 1 Replies
View Related
Jan 3, 2013
I purchased a new N600 dual band router (2.4 and 5.0 GHz). I set up security to use WPA/WPA2 PSK (AES) on both bands. The devices that can see the 5.0 band could connect without issue, however those devices that can only see the 2.4 band (older devices like the Nintendo Wii, my desktop computer with wireless, and iPhone 4's could not connect). In troubleshooting, I finally disabled security on the 2.4 band and everything connected without issue, but I cant figure out how to successfully enable security on both bands at the same time.
View 1 Replies
View Related
Apr 4, 2013
Environment :AP 2602, WLC 5508 V7.4, ISE 1.1.2, Prime Infras 1.2
For a specific SSID, we use MAC address as 1 of the conditions to authorize access only for the company-owned mobiles (smartphones and tablets), the other condition being, for the mobile, to present a valid AD user/password;this way, the so-called BYODs are rejected since this is the rule within this company ;The difficulty with this approach is the fact that there is no way in ISE Identities Endpoints nor Groups to associate a user-friendly name to the MAC address of the mobiles, which makes very tedious some actions such as a search in the ISE authentication Log based on the MAC address value itself;the question is just to know if it is planned to add a new field in Identities Endpoints definition that would allow to associate a user-friendly name to a MAC address, for future ISE versions,
View 1 Replies
View Related
May 9, 2012
Trying to set up a stateful failover with two. asa5510
Here is what I have so far, tell me if this looks right. The ip address are set to 0.0.0.0 only for this discussion.
Config Primary Firewall:
config t
interface management 0/0 ip address 0.0.0.0 255.255.255.252 standby 0.0.0.0
interface eth 0/0
[Code].....
View 7 Replies
View Related
Feb 11, 2012
I have a cable modem but need to hook up 2-3 computers. I cant get internet through my d link router, but can still use it for home networking. I tried getiing into the d link with 192.168.2.1 but failed...resetting does nothing. I also have a westell 7500 dsl modem/router but it also fails to supply any comp with internet, although only my xp comp can access it. I can not get into the routers. Resetting does nothing.
View 11 Replies
View Related
Apr 11, 2011
I have this LinkSys by Cisco Wireless-N gigabit model# WRT310N router that quit functioning in a weird way. (it has Wi-Fi protected setup on it, not sure if that would effect it, it's disabled) I have a friend in the condo above mine, but i have a Dial-Up internet conn and can afford a good broadband internet conn. a co-worker gave this router to me, saying he didn't need it for his network at home. It was still in original box, unopened, So it was intact. i set it up so i can play Age of Empires 1 (you probably haven't heard of it, it's a single player or Multi-player TCP/IP comp-to-comp game from '96) and i used a gigabit wired conn, he used wireless-N laptop. We played a few games, on the 4th game, it locks up about 12 mins into the game. we try again, the comp not even recognize each other. Knowing a little about networking from watching the IT guys at work, i tried the PING command in cmd.exe in vista, it will ping the router, not the other laptop. same thing on the other laptop pinging my desktop. i unplugged the router, and went to sleep.Next day, i got back from work, called the friend, plugged the router back in, and it work for another 14 mins, no ping. possibilities? the LinkSys website doesn't give answers, so what is it?Further Edit: my Gigabit conn is going through a 3 ft CAT5e cable, and the wireless-N trans rate is set to 130 Mbps.
View 2 Replies
View Related
Oct 28, 2012
Will i need another RFS6000 controller to run a single AP650 (isolated remote location) or it can be set in stand-alone mode ? I might consider install one antenna per location in 5 different store.
View 6 Replies
View Related
