we have an issue with user who says that he is unable to connect to AP and he need to re-boot it everytime to re-connect to it.But when i check from WLC all the AP uptime is more than 150 days and the AP associate time of respective AP's is also more than 150 days.we are using cisco AIR-CT2504-K9 wlc and all the AP's are connected to Cisco 3750X and cisco4510R+E. [code]
View 2 RepliesI have one issue on Vlan in Cisco 3750X switches , I have 2 Offices , I am sitting at corp OFfice and i have one 3750 ( 10.10.1.36)Switch at my location , in my remote office i have one more switch 3750 ( 10.10.33.1) and i am able to access the both vlan IPS with out any issue , now i have some network components in Vlan33 ( 10.10.33.1) at my remote office . i am able to ping 10.10.33.1 IP from my corp office , but i am not able to ping any network devices in 10.10.33.5 example : 10.10.33.5 is my Cyberoam IP at remote location and i am not able to ping , i have taken a trace route and not able to find the issue as i am not much femilar , ping 10.10.33.5 at remote location devicec
I am giving the Configuration for both locaitons below :
10.10.1.36 - Corp Office 3750 Switch:
sh run
L3-#sh running-config
Building configuration...
[Code].....
I have a 3750X stack of 6 switches, I have a terminal server console server plugged into the console ports of all 6 switches. I am having a strange issue where I can connect to the master via the console, get a login prompt then I can log in, but when I try and connect to any of the members then I get a prompt "Press RETURN to get started" When I push return, it just loops back to the same prompt again:
switch-6 con0 is now available
Press RETURN to get started.
switch-6 con0 is now available
Press RETURN to get started.
I can connect to the stack via SSH fine etc. I am running 15.0(1)SE2. The stack is configured for TACACS+ auth via Cisco ACS.
Switch# Role Mac Address Priority Version State
----------------------------------------------------------
*1 Master f0f7.55ba.2700 15 1 Ready
2 Member f0f7.5541.da00 14 1 Ready
3 Member a493.4c1e.4b80 13 1 Ready
4 Member f0f7.5585.cb80 12 1 Ready
5 Member a44c.1120.8e80 11 1 Ready
6 Member a493.4cc0.fa80 10 1 Ready
Is it possible to connect 3750X with C3KX-NM-10G to X2 10G port on sup2t in 6500E switch.There is Cisco OneX Converter Module, but I could not find that it is supported on sup2t.
View 2 Replies View Relatedknow if it is supported connecting the SUP7L-E 10GE ports to a C3KX-NM-10G, using a SFP-H10GB-CU5M (or shorter).
View 3 Replies View RelatedI recently reformatted my laptop to get rid of Vista and now run XP. Stupidly, I didn't know what I was doing 100% and now can't connect to a wireless network. I've looked at guides on how to with XP and it is saying to do it through Network Connections. I have no wireless sections in my NC, so it's basically like XP doesn't realise I've got wireless capabilities.I have installed all of the drivers that there are, multiple times. If I press the wireless button, the window with the Bluetooth, WLAN and UMTS still comes up.
Laptop: Esprimo Mobile V5535
I have some connection trouble with AIR-AP1141N-A-K9.I put a IP camera in my home and connect to AIR-AP1141N-A-K9 via wireless.After a while about 1 week, the wireless will be dissociated.
Below are some information & log message of AP.
AP information
----
Product/Model Number: AIR-AP1141N-A-K9
Top Assembly Serial Number: FTX1533KDNF
System Software Filename: c1140-k9w7-tar.124-21a.JA1
System Software Version: 12.4(21a)JA1
Bootloader Version: 12.4(23c)JA1
[code].....
i am unable to connect new sony bluray BDP S370 to the internet using a 11n wireless LAN adaptor. As soon as the adaptor is pluged in it is not reconised
View 1 Replies View RelatedI am unable to connect to my network using my d-link wireless adapter. I am able to connect to my neighbor's network and other devices in my house can use my network with no problem. I am absolutely positive that I'm inputting the right password, but am unable to connect.
View 3 Replies View RelatedSince successfully restoring my laptop to factory settings I have been unable to connect using my Intel PRO/Wireless 3945ABG Network Connection.Initially it worked, but after a while it stopped. I have completed several system restores, and the wireless connection works for a few days. On the last occasion (after installing windows updates) I received the dreaded blue screen and have been unable to connect.I am not sure if it is related to installing new windows updates as prior to restoring to factory settings I had no issues with my wireless connection.I am able to connect using the ethernet cable and I am currently able to connect using Pluscom wireless usb adapter. [code]
View 14 Replies View RelatedI recently used my dad's Acer Aspire 5040 and saw that he was using xp service pack 2. I thought i'd do him a good turn by putting service pack 3 on and now i can't get it to connect to the wireless router.At first it was saying "you are connected to this network" in the list, but still saying "Not connected" in the top right.I thought it may need updated drivers so I have installed everything from the Acer site, including the Atheros Client Utility.
Now, when i use the auto settings it defaults to the ip 169.254.161.135 with the default gateway the same, but my router gateway is 10.1.1.1. so it says it has limited or no connectivity.I try to change the settings manually and everything goes green and says connected but it still wont access the internet or ping the other computers.I have tried resetting the router as I thought it may have been that not resolving DNS addresses but my netbook is connecting to it fine.
I've recently reinstalled a fresh windows xp operating system onto an old laptop. I've been through some trouble getting the drivers installed, but now I've finally completed that.[URL] I cannot connect to my home's WEP secured wireless network to which I have the password. After I followed the steps detailed in the link, instead of saying "detecting network type," the loading bar says "waiting for the network..." and after about 30 seconds, it disappears and nothing happens.I can connect to my router by directly connecting it with an Ethernet cord without a problem. And I know that the laptop is capable of connecting to a wireless network. I was able to connect to a nearby neighbors unsecured wifi, however it was with a very slow connection due to the distance and weak signal. It will just not connect to my own.
View 14 Replies View RelatedSo, my computer was having some serious issues, but the internet worked just fine. Me and a friend live in the same building and we're sharing a wireless connection and splitting the cost. I had to reformat my computer (it was windows XP SP3), but when I reinstalled windows it's SP2. I installed the wireless drivers and such, and those work great. However, I try to connect to the network 'Cay13' which is the one I'm sharing with my friend but it won't connect. It will just keep saying 'waiting for the network 'cay13' to connect to the network'. It won't come up with an error, it will just stop and refresh the wireless networks. I will then get a bubble that says 'Unable to connect to preferred wireless networks., Windows will keep trying.' etc... My friend's computer connects just fine so it doesn't seem like it's the router, and I've tried every which way from sunday to configure, connect, uninstall/reinstall the wireless drivers, etc.
View 4 Replies View RelatedMy son's laptop suddenly stopped being able to connect to the internet via wireless. I can see it okay but just unable to connect. I've checked the drivers and they are up to date. It shows on my network when wired and I've checked with the virus software and I can see no reason for it to be blocked.
View 11 Replies View Relatedi cannot connect to a certain wireless network. The router can take upto 4 laptops and this one will be the third so itis not a question of to many.All the other laptops can conect to the router when the pass key is put in but this computer will not. This computer will connect to other networks but not the one at home. When i put the pass key that it asks into the computer it says that it is not the right one. What am i doing wrong or is there something missing from the computer. Not very experienced at this so be patient and spell it out in laymen terms
View 1 Replies View RelatedI bought a brand new psp today and was trying for last 2 hours to connect it to my wireless network but each time it display an error code 8041160B. I called my internet service provide and we changed the WEP key but i am still getting the same error code. One weired thing I noticed that psp shows only 8 digit WEP key while my key is 10 digit. I don't know why psp doesn't show the 10 digit key. Also, the same issue happend 6 months ago and i was told psp network is closed as people ids have been stolen so i returned my psp and it seems i will have to return it again.
View 1 Replies View RelatedI am able to connect 3 computers to the network. When I enter the passkey in the HP printer, the network goes down and I need to restart it. Then computers are back on, but the printer cannot be seen. The printer driver is downloaded.
View 3 Replies View RelatedI am using a netgear wgr614 router and the laptop I'm trying to use won't connect. It shows up as available but 'Windows was unable to connect to NETGEAR' pops up. Futher troubleshooting brings up "Investigate router or access point issues" but turning off the router did not fix the problem.
This is what is on my Desktop:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsDebra>ipconfig
[Code].....
i have a laptop and a desktop, everything was working fine until i messed with something in the router settings by accident, i changed some type of security setting and then changed it back because i was testing something.. at this point i had to remake the network for some reason, whcih was no problem i put in the pin and security code and i was able to connect through my desktop with no problem.. a few hours later i realized my laptop could no longer connect.. i recieved the unable to connect error.. i read that it could be the security settings, so i assumed i switched something before by accident and i restored to factory defaults...
after i did this my laptop could connect to the internet but my desktop couldnt connect! so it basically reversed itself.. i dunno what could be the problem.. i tried 2 of the 3 authentication modes because i am afraid if i try the 3rd i will lose internet completely then i will have no clue what to do..
I am unable to connect to a wireless network.
View 3 Replies View RelatedHave a Dell Inspiron 9100 w/ Windows XP. Dowloaded "owners manual" prior to problem. Rather computer illiterate, but homebound after cancer treatment & computer is my LIFELINE ! After painstakingly following step by step troubleshooting guide from Windows AND Dell owner guide, came up w/ "video card disabled". Have a DSL modem from tele. co. & husbands pc does great, but my laptop won't connect to browser via wireless or if I plug it into modem....???
View 16 Replies View RelatedI have a Cisco Linksys router that I have been using for about 6 weeks just fine with Windows Vista on an Acer Laptop. We had some power outages (about 3, less than 30mins each) and the internet was down for nearly 48 hours early this week. Now that it is up, I was able to connect to my router for a few hours. When I shut my laptop off and about 2 hours later tried to access the web again, I found that I couldn't unless I hardwired from the modem.I've done the windows repair network connection and the Cisco Network Magic fix- (It says things like flushing DNS cache while doing its thing). Both say my network key is wrong. No one else in the house could have changed it, I was the only one home.I've power cycled both the router and modem. I've turned my laptop off and rebooted. I used the manufacturers settings to try to go in and see what happened. I can't type the router's direct IP and get into like it says I should in Firefox.
The one thing I've noticed is that prior to the outage- my router had a "name" that I named it, while now it's back to linksys_numbers_letters. However, I was still able to connect after the outage at the beginning.
I have windows 7 on one client and windows xp on seconad client. the problem occure when i share hp 1320 pcl 5 printer on network..when i go to install the error shows " unable to find *.inf file".
View 4 Replies View RelatedI am unable to connect my samsung blu ray dvd BD-P3600 via the wireless connector. I have tried all 3 secure modes with the wep key to my wireless G router, none work. I have tried to manually enter the IP, DNS, etc information manually also to no avail. I have followed all the directionsfor the settings, just unable to connect.
View 3 Replies View Relatedi have 2 laptops (1. Dell 2. IBM) and both of them worked wirelessly with BT until last month when I switched to talktalk. Dell s laptop now works wirelessly but the IBM isnt working either wired/wiressly. When I connect the IBM laptop to the modem through the cable my Dell laptop stops working too, looses the wireless configuration too and in order to make it work again I have to plug it back to the modem andafterwards going wirelessly. I spoke to talktalk support and they confirmed that the line works fine therefore there is a problem with the IBM laptop which also causes problems to the DellLaptop.I domt know from where to start to get the laptops working again fine at the same time.
View 2 Replies View RelatedI just bought a Lenovo ThinkPad for my wife and I cannot connect to my router via wifi. I keep getting the message 'Windows was unable to connect to (network name). I tried it with router security disabled and I still get this message.
View 3 Replies View RelatedI have not been able to connect to the wireless connection. I have had some trouble with this in the past when booting up, but usually I can manually select our wireless network on my own and it works fine. But since last week, I have not been able to connect at all. On the Wireless Connection Status, it showed Limited or No connectivity. I tried the repair button in the Wireless Network Connection Status Support tab, and that told me that I cannot connect because I could not renew my IP address.I have tried a few different things, such as doing an ipconfig /release and /renew. Schools coming up, and itd be nice to have internet access on the laptop as well as our desktop.
View 1 Replies View RelatedWindows is unable to connect to the selected network. The network may no longer in range. Please refresh the list of available networks, and try to connect again.This message poped up during connecting to a wireless network
[code]...
i bought an Apple iMac with Airport (an inbuilt router.) I have a desktop computer (Windows XP) in another room, and also a laptop.I bought a TP-LINK TL-WN721N Wireless USB Adapter. On the Laptop and Desktop, the wireless network is working. My network's name is listed, with full strength. However, when the message Detecting Network Type comes up, the message closes with another message - "Windows is unable to connect to the selected network. The network may no longer be in range.
View 11 Replies View RelatedLast night i was changing some settings of my router(linksys WRT54G) trying to assign a gaming console a static ip. I thought i had succeeded and everything was working fine. 12 hours later, it appears everything can no longer connect. all the regular lights of the router are on, but my desktop pc and my wireless laptop seem unable to connect.
View 6 Replies View RelatedI have 2 PCs in my home both running windows 7. My PC is directly receiving internet (10mb/s broadband). I have tried a few times to set up wireless for my mother who has her PC in the other room. The problem I have is that all though her PC recognizes the signal from my wireless, when I try hit connect, nothing happens and it gives me troubleshooting options.
[code]...
I have just purchased a new laptop (HP Pavilion G series) for my studies at university. The wirless works fine when I am connect to my network at home, but I am only able to connect to the university's network when an ethernet cable is plugged in. Everybody else I know, who has a similar setup to myself has no problems connecting to the network without the ethernet cable and I was curious as to why this might be.
I am running on Windows 7 and the wifi adapter is a Realtek RTL8188CE 802.11b/g/n
As I say I am quite a rookie when it comes to computers
I've problems connecting to my wireless network. i do not face this problem in the past until recently i've some problems with my laptop. after i re-format my laptop, i faced with this problem. here are some of the images i took.
View 11 Replies View Related