Cisco Wireless :: 891 W - Web Pages Access Wirelessly
Jun 19, 2012
I am am having all kinds of problems with setting up my router. I finally got the LAN stuff to work but the wireless will not work its like something is blocking it but I don't see anything. I can ping from wireless to any IP address but I cannot open up web pages. You would think this is DNS issue but I my DNS l looks to be fine and the same DNS works on the 8 port switches on LAN side without issue. I also thought maybe its something to do with ACL but I don't see anything there either.
I built this using a couple of other web posts: [URL]
The first one gets my LAN up and running, and the second one will let me get my wireless up and working and show my SSID but for some reason I am blocked from the internet as far as web pages, and perhaps blocked is not the correct term at this point as it could well be settings but in any case I cannot get there. My level of knowledge is around the CCENT 1, and part of the CCENT 2. I was studying for the first test with my home lab two routers and two older switches when I decided to buy this and since working on this my actual experience has pushed past the first test and pushing me to learn a lot of new things. Many of the things in the AP I still don't understand from IOS perspective. all that bridging is a bit confusing and its not in my videos I study for the test.
(I did find a bug with the 891W model: if you use the GUI and enable the wireless using CCP then you go into the command line and put in guest mode to show the ssid it bugs out and it will not show the SSID. You fix by going back into CCP and turning off SSID and then the command line will work and it shows up, weird huh, but anyway I just put that in here in case some other person is looking for 891W and runs across the error)
Edited: OK I am adding a piece of information. I can ping Google at 74.125.227.51 "from a my PC connected to the wireless AP" but when I Put that same IP into the browser it will not go through. So seems like ICMP is getting through but maybe HTTP and HTTPS are not? I may be on wrong track but seems related.
Note: When connected to the Ethernet switch port 0 of the same router (its 8 port switch built in as well) I can get to all websites via browser without any issues. Its only with the wireless that I cannot.
show runBuilding configuration...
Current configuration : 5658 bytes!! Last configuration change at 06:08:06 UTC Wed Jun 20 2012 by brian!version 15.0service timestamps debug [ code]...
View 3 Replies
ADVERTISEMENT
Aug 23, 2011
I cannot access the WRT610n setup/management pages wirelessly from my Macbook using safari. I can access the router via wireless from iPhone and PC and I can access it from the Macbook via ethernet cable.
When I try to access the router from the Macbook I just get "Contacting..." in the Safari status line and eventually it times out.
I can access the internet using Safari via WRT610n wireless. The only page I can't access is the router's management page.
View 7 Replies
View Related
Jan 16, 2012
Just bought myself an 825. I've got it set up and working, but how do I prevent wireless users from accessing the setup pages for the router?
I only wish wired access to the setup pages. I'm used to doing this on my old linksys, but can't find the setting on the new router.
View 3 Replies
View Related
Jan 9, 2012
I have a DAP-1513 unit but there is no section for that unit on the forum.Is is possible to access the configuration pages over the wireless connection. After setting up access to the main router via WPS, I can access the configuration pages for a few minutes after I "power cycle" the unit.
View 9 Replies
View Related
Dec 27, 2011
By now, I'm sure E4200 and other Router users that have twonky have noticed they cannot access the twonky configuration pages, as you have chosen to block them. Please give advanced users a work around to this, because if Twonky does not recognize our newer TV/devices, then we cannot play certain file formats without manually configuring the service.
View 3 Replies
View Related
Jun 6, 2012
I have a Cisco 871 router at one of my client sites.(they purchased the router from me and I sent them the router with a basic configuration on it). When they connect it after hours clients get the proper IP addresses and dhcp configuration however are unable to access the internet.We are connecting their ISP supplied router to Gigabitethernet0. They have a static address. I have been through the confirmation many times and am thinking I am missing something so simple.
View 2 Replies
View Related
Jul 6, 2012
i am connected to the net via LAN cable and accessed the router as admin and tried changing settings from removing encryption to different channel settings.
View 1 Replies
View Related
Mar 21, 2012
Iv tried about everything you can find when you google things about not being able to access a particular website but none work checking out all security settings, deleting all cache, disabling security, checking date and time, flushdns, use opendns, try other devices (not one device in my household can get to https pages on this one site), making sure root certificates are updated, bypassing router, unplugging internet and router to ''reset'', trouble shooting with isp, website, ssl issuer, other wildblue users, other website users, other tech forum, checking for virus and malware and I'm sure there's more that I can't recall at the moment. I am not the only user of this website with a problem and all us having a problem have satellite internet (different providers), however not everyone with my satellite internet (wildblue thru dishnetwork) has this problem as I have asked here...some do some don't Wildblue ''blocking'' a website's ssl? - WildBlueWorld.com Forums
I can go to the website toontown.com but I can not access any pages that are ''secure'' or https. Can't login and using satellite internet?
View 14 Replies
View Related
Apr 16, 2011
I would like to be able to access my DSL Modem's http setup screens from my networked computers via my DIR-655 (rev B) router - but I do not know how to get the router to route to the WAN port.
At first, I had my DSL Modem's LAN IP at 192.168.0.1 and my DIR-655 at 192.168.1.1 and the rest of my home network at 192.168.1.xxx; because I had read on a forum that having the modem on a different subnet prevented potential routing problems. When I pointed my web browser to 192.168.0.1 - it would just timeout (I kind of expected that).
Now (willing to try anything), I have my DSL Modem's LAN IP at 192.168.0.2 and my DIR-655 at 192.168.0.1 and the rest of my home network at 192.168.0.xxx (DHCP range is set to assign hosts from 64 to 254). When I point my web browser to 192.168.0.2 - it still just times out.
The DSL Modem is setup in transparent bridge mode. And everything else is working well with the home network.
How can I get the DIR-655 to pass/route my http connection to the DSL modem?
View 10 Replies
View Related
Apr 13, 2012
I am trying to setup my network in my home, so that I can extend the wireless signal from my main router by using an access point (a tenda w311r+).But, I want to do it so that the access point isn't connected to the main router with a cable, I want it to be connected to the main router wirelessly.It does say on the box that it can 'bridge' multiple wireless routers.
The access point I have also has 4 ethernet ports on it, so I will use one of these to plug my xbox 360 into.I also want the main router to be responsible for the DHCP.
View 3 Replies
View Related
Jan 4, 2013
My computer sees my network, but I can't connect to the internet wirelessly. If I plug in the Ethernet cable from the modem I can access the internet. So, I've narrowed this down to something with my router.
OS: WIN7
Router: Belkin N750 DB N+
Steps taken:Modem and router have been shut down and restarted.Router has been returned to factory settings and reconfigured.Validated with my ISP there are no issues with my internet service. Router software has been uninstalled, reinstalled I do not use McAfee. I've run a full virus scan, a full malware scan and just for good measure, a defrag. I've checked my firewall.
View 1 Replies
View Related
Jul 19, 2012
My friends computer cannot access internet. Was wondering if I could hook it to my computer (using crossover cable) to access internet.
View 2 Replies
View Related
Feb 19, 2013
I am not able to connect to any webpages in normal mode, even after restarting i still have the same problem [However it works in safe mode with networking]. The network connections show that it is connected and the signal strength is excellent. I then have to keep restarting the laptop like 3 to 4 times and it works. Its kind of frustrating to keep doing this all the time and besides i am scared by restarting the laptop so many time can harm it.
View 1 Replies
View Related
May 10, 2011
I am unable to access files or folders wirelessly between my 2 laptops both running Vista. Both machines can see each other. I can access files with a wired connection.When using wireless I get error message 0x8007035
View 2 Replies
View Related
Jun 3, 2011
I am trying to wirelessly connect a netgear wgr614 v6 to be used as an accesspoint and my router connected to the cable modem is a dlink dir825
View 1 Replies
View Related
Dec 2, 2012
I have a BELKIN F5D8235-4 V2 wireless router and I am trying to hook up my Western Digital My Book Essentials 2.0 1 TB hard drive to gain access wirelessly through the router. I have it connected to the router via USB but do not know how to access the drive. I have tried mapping a new network drive, but it is not listed as a connection. how can I access the drive.
View 1 Replies
View Related
Aug 1, 2012
I have a DVR that I am trying to hook up to my network wirelessly. I have the wireless router in the house and can connect to it with my laptop from the shop in the back. Is there a way I connect the wireless access point to the DVR in the shop and see it on the network in the house?
View 2 Replies
View Related
Feb 23, 2013
[code] I had a new wireless DSL router installed on the network. The router recognizes both the laptop and printer and I can print documents from the laptop fine. I cannot print an accessed webpage from any browser (Firefox, Chrome or IE).
View 1 Replies
View Related
Jan 15, 2013
I have looked through the forum and think that I have found the answer to my question but I just need confirmation of my thoughts. We are using a 5508 W LAN controller running software ver 7.2.110.0 and LAP 1142n AP's.
What I would like to do is to configure multiple guest W LAN for each of our regional offices. Each of these W LAN needs to be configured with a Web Authentication page relevant to the office location. My question is this, can I have a Web Authentication page for each location or just 2, the default internal page and 1 customized page?
View 4 Replies
View Related
Mar 16, 2011
I have a neighbor whose wireless network is not secured (open). When I try connecting to it, it appears connected like a normal wireless network -except without the bell sound that I get form my wireless card software when the connection is successful-. However, web pages cannot be displayed nor can I update any software, and it is as if there is no internet connection at all. Actually, I have used my neighbor's wireless internet for a long time before the occurrence of this problem, and I can connect to any other open wireless network without any problems. Do you think that my neighbor has changed something in the settings of his wireless network to prevent me from accessing it? What should I do in order to solve this problem from my laptop?
View 1 Replies
View Related
Aug 30, 2011
I cannot connect my laptop to any of the normal wireless networks I use.It says, it's connected with good signal strength but than it never stops "identifying" and doesn't load any pages.
View 4 Replies
View Related
May 26, 2011
I can connect to my mom's wireless network but now all of a sudden I can't get any pages to load. All I get is this page cannot be displayed screen. My computer shows I'm connected with an excellent signal but I can't get any pages to load, I can't even send and receive my e-mail.
View 2 Replies
View Related
Sep 16, 2011
have problem with WRT54GH, almost every second page after reload gets an error message: Error 101 (net::ERR_CONNECTION_RESET): The connection was reset. Tried both on IE, Firefox, Chrome Tried to disable antivirus, no effect, the pages still load not all the time, firmware upgraded to the latest version. Before didi not have such problem with Zyxel W330EE.
View 4 Replies
View Related
Nov 26, 2011
I am getting frequent stop pages in streamed video, a message appears on my laptop saying "loading" and a red line beginning traversing the screen. Eventually the line gets across and the video begins again to stream. When I do a speed test I get around 10 Mbps both through the router wireless and hardwired connections. This happens almost every 10 minutes. I have tried rebooting the router and the problem persists
View 9 Replies
View Related
May 2, 2012
Just finished the setup for Canon MP780 USB printer to work with EA4500. Printer goes online only while it prints the pages. When I try to scan the document with MP Navigator it cannot communicate with the scanner as printer is essentially offline. How to setup the printer in order to perform the scan of the documents?
View 2 Replies
View Related
Apr 8, 2013
I am using a Netgear DG834N modem/router that we moved onto our second phoneline (homeline) that was previously installed on our (now closed down) home office phoneline. We are using the same equipment, provider and provider plan but now we are having major connecting issues. About every second web page will not open. If you refresh, sometimes it will load other times you get the "IE cannot connect to.." This is becoming increasingly frustrating. We run both wireless and hardwired PCs and laptops and use IE, firefox and/or Safari. We run Kaspersky or bitdefender, windows 7 and XP. We can watch re-runs of Tv shows and you-tube no worries. It is the connecting in the first place.
View 5 Replies
View Related
Jul 11, 2012
IE9 can't display any webpages. Troubleshooting shows that it can't detect my proxy settings. However, I don't have proxy settings/server checked anywhere. Moreover, Pale Moon is able to connect to the internet.I've tried these so far with no luck:
1. Resetting IE
2. Reinstalling IE
3. Removing idstore to see if it'd work -- nope
4. going to cmd and using dnsflush, ipv4/6 reset, winsock reset, ipconfig release
5. Reinstalling adapter
6. Removing firewalls
7. SFC scanner
Windows IP Configuration
Host Name . . . . . . . . . . . . : GLaDOS
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[Code]...
View 5 Replies
View Related
Jun 26, 2012
How to connect about 20 IP Cameras sccatered about 1km apart within a residential estate. I need to power the PoE switches at each camera location without cables and all cameras pictures/events must be monitored in a control room though a wireless network.
View 2 Replies
View Related
Apr 11, 2012
I have a CanonPIXMA iP4000 printer connected to my 64bit VISTA PC via a USB cable. My XP laptop is connected via a Router to the PC. I cannot share my printer between the two. My Laptop says that the drivers are,nt loaded, even though they are installed. I used to be able to share the printer before, until I had a virus on the laptop, and I had the operarating system deleted and then installed.
View 4 Replies
View Related
Feb 23, 2011
I am unable to connect to my network using my d-link wireless adapter. I am able to connect to my neighbor's network and other devices in my house can use my network with no problem. I am absolutely positive that I'm inputting the right password, but am unable to connect.
View 3 Replies
View Related
Feb 5, 2011
I have and issue that is bugging me a bit. I have a DSL connection that also is set up with TV also through the ISP modem. I also have 2 phones connected to wall jacks with DSL filters and made sure they both have 4 wire phone lines. I replaced the 2 wire phone line to modem with a 4 wire one. The desk top is connected to modem wired and internet works. There are 3 other slots but they are for TV box's that this company uses (CTC) I bought a Netgear router tried that several times called and ISP stated they won't work with Netgear.Ok so bought a Linksys E 1000 wasn't able to get that one to work either. Brought to another person's place and works fine. Connected back and only way to get to work wired to desk top is to have internet coming on on line 1 and compter on line 2. I can connect to router wirelessly to the routers main page but no interent. I can connect to the neighbors wireless internet so I have to believe that it's not the phones in the place. I can also run a wire from router to laptop and go on internet but does not work wirelessly.
View 9 Replies
View Related
Dec 8, 2011
I currently have a WRT54G wired to my modem, and my two personal laptops connect wirelessly just fine, but my work laptop doesn't support wireless and sometimes I want to work upstairs so I have to run an ethernet cable up the stairs. I was hoping that I could get another wireless router that would connect (wirelessly) to my existing wireless network, then I could plug my laptop into the second router.
View 1 Replies
View Related
Feb 23, 2013
How to Connect 2 wireless routers wirelessly prolink WNR1008
View 2 Replies
View Related
