Cisco Wireless :: Move 1300 Bridge From 1030WLSE To 5500 WLC
May 5, 2013
Product/Model Number:AIR-BR1310G-A-K9
System Software Filename:c1310-k9w7-tar.123-7.JA
System Software Version:12.3(7)JA
Bootloader Version:12.3(2)JA4 .
We have several of these bridges hanging around; would like to move them one at a time from our 1030WLSE to our 5508WLC (software 7.0.235, so they're compatible).The bridges are all connected to power injectors (AIR-PWRINJ-BLR2). With our 1200's, we apparently just unplug power, hold mode button, plug in power, release mode after about 4 seconds, and they find the new controller (I haven't tried it yet to confirm, but that's what Google...err...Cisco...says will work!). But obviously there's no "mode" or reset button on either the power injector or the bridge itself.
(Other than "shut down the old controller and the bridges and APs will find the new controller". I'll do that at some point, but want to test first with some spare bridges / APs.)
View 1 Replies
ADVERTISEMENT
May 13, 2012
i need to configure wireless link between my 1300 series, how can i use them like a bridge and access point in the same time?
Do i need static ip for BVI interfacess between them for bridge or its need to be DHCP, is there any example?
View 5 Replies
View Related
Sep 14, 2011
I've been getting warning messages from the event log of a 1300 series bridge, which is set as an Access Point in the network, states: 'Packet to client (mac address) reached max retries, removing the client'; I'm not sure why the client is removed. Does 'reached max retries' mean that the client has tried to many times to connect to the AP/Bridge?
View 1 Replies
View Related
May 7, 2008
I am trying to install a AIR-BR1310G wireless link between two buildings. I configured the setup in a lab and had everything functioning. Shipped it to the client who is now trying to install it. The radio link is up, but we are having issues with the remote Ethernet connection.The root bridge is connected to a WS-C3560G-24TS (core) switch. The port is setup as a trunk with a native vlan of 2 (our management vlan). [code] if I do a "show power-injector" on the remote radio (no Ethernet link), I get: "Received zero AutoMIB packet from Power Injector, Check to see if CDP is disabled on Fast ethernet" repeating. No other entries. If I do the same command on a unit with a link (root bridge) I get information about "Power Injector Port 0 speed 100Mb/s duplex full link up enabled yes" with a bunch of stats. Similar for "Power Injector Port 1". Power Injector Ports 2-4 as "down" and 5-6 as "disabled". Other than the 3 different patch cables they tried (all straight through) or a crossed cable (try tomorrow when they buy one), is there any other reason the port won't go Up/Up?
View 3 Replies
View Related
Aug 7, 2012
Looking to put a wireless bridge in to connect 2 building about 2000 feet apart. Excellent Line Of Site from rooftop to rooftop. Very little data traffic but will be running Voice over the link. Any have any input on using the 1300 bridges for this application as a permanent install?
View 5 Replies
View Related
Aug 12, 2012
We are using Cisco Wireless solution in our network. Using 4400/5500 WLCs and 3500/1130 series APs.
A new requirement has come up and we need to provide connectivity between two buildings (which are within 1 km) using wireless. This link should be able to give >=100Mbps.
As we already have 3500/1130 APs, can a wireless bridge be established using them which can also give >=100Mbps? Can this be done using a WLC based solution? What I mean is: Do I need to have a standalone AP solution or can it be done while both the APs register to WLC? What are the AP models/antennas that can meet my requirement?
View 6 Replies
View Related
Dec 7, 2012
I have a Dell Inspiron 1720, that uses a 1300 wireless lan, that keeps crashing. Is there a fix for this, can I replace it with another wireless lan card? Whenever I first start the computer, I would get the error message saying your wireless card had stopped working.
View 4 Replies
View Related
Jan 11, 2013
I have two different LAP 1300 and 1200 in my network and I need to add theme to the WLC,I successes to add one of theme by the option 60 in the DHCP pool at the Core SW,How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
View 4 Replies
View Related
Feb 20, 2008
I have two Cisco 1300's acting as bridges only. I have created an infrastructure ssid on VLAN 2 and assigned this to the radio. I am carrying multiple VLANs between the bridges (using subinterfaces on the fastethernet and radio ports).I have enabled WPA-PSK, but how do I check that this is being used between the bridges? Also - I have a switch connected at each end of the bridge. When I make VTP changes, the remote switch does not pick these up - is this because VTP goes over VLAN1 regardless of the Native VLAN (2 in my case)? Do I have to carry VLAN1 over the bridge to get VTP working, or is there an alternative solution?
View 7 Replies
View Related
Oct 29, 2012
My wife has a Dell Inspiron 1300 which crashed. I was able to start it again using the Dell Operating System Reinstallation CD for XP Professional but the wifi (wireless) does not work. Before the crash it had a working wireless connection. It appears that I need to reinstall a driver for it. How can I get a driver when I have no internet connection on that computer? I have tried loading on a flash driver from another computer, but it doesn't seem to transfer. What driver do I need and how can I get it to install on her computer?
View 5 Replies
View Related
Apr 6, 2008
Is it possible to configure two 1300 series bridges at one location, each handling a bridge link to another location to BOTH backup and load balance for each other should one of them fail?
View 5 Replies
View Related
Oct 3, 2006
My lap top and pc were both accessing internet fine. Now my laptop has the message windows cannot config. wireless connection. If you have enabled another prog. to manage this connection use that software. Then it says ifI want windows to config., start WZC service. I am a novice and don't understand any of this. I don't think I have done anything to enable another prog to manage the connection. I have tried reloading isp disc and making new network connection but to no avail. the little network logo has a red x constantly.
View 4 Replies
View Related
Mar 7, 2013
Well I just built a new computer but I didn't buy a wireless card because I figured I could just use the one from my previous computer. The problem, however, is that I can't seem to find the wireless card at all. All I see is a sound card and a video card plugged in so how was I able to get wireless internet on the computer in the first place?
For what it's worth the motherboard is a M2N68-LA
View 6 Replies
View Related
Mar 14, 2013
I have Cisco 1131 & 1300 Light Weight Acces Points and I have 5508 WLAN controller. If i enable the wlan controller internal DHCP Server can this access points will work with this internal DHCP server or do i need to configure DHCP option 43 for these access points? Can these access points works with LWAPP or do i need to configure CAPWAP?
View 4 Replies
View Related
Oct 18, 2011
i got the problem with 1300 bridges,root bridge with omni antenna and non root with sector antenna , it can associate and can pin each other , but whenever i try to browse several web pages its get timed out and radio was down.
View 5 Replies
View Related
Jun 28, 2012
hp 1300 printer driver for windows?
View 1 Replies
View Related
Apr 11, 2011
What is the average/maximum distance coverable by Aironet 1300 and 1240AG ???
View 3 Replies
View Related
Nov 18, 2011
basically a friend of mine gave me his old dell inspiron 1300 because my other laptop died.
It was running really slowly, and still is, so I cleaned the registry, defragmented, all sorts of things, I also started to download updated drivers for the system. Since I downloaded the broadcom update my wireless has been utterly useless, it keeps disconnecting and reconnecting by itself, its really annoying. I guessed it could be the laptop not liking the update so i uninstalled it, but it still has the same problem.
We have other laptops and devices connected to the wireless so it's not that. oh! by the way here are any laptop details you might need.
System: Windows XP Home edition
service pack 3
laptop details: Dell Inspiron ME051
Intel celeron M
processor - 1.60ghz
504mb RAM
View 3 Replies
View Related
Aug 16, 2011
I have a cisco aironet 1300 series and i need to reset it back to factory default. the directions say push the mode button while the access point is off and then turn it on while the mode button is down.
View 1 Replies
View Related
Mar 12, 2011
i am trying to connect to internet using area local connection but when plug it in it says connected but when i go to the web using any internet browser it says no internet connection.
View 8 Replies
View Related
Oct 11, 2006
I need to know if LAG channel groups can be used to increase capacity of media converted links? (i.e. wireless links).For example.. aggregating two 1300 series wireless bridges via 2 switches.
View 1 Replies
View Related
Mar 26, 2012
I've just installed Windows 7 Ultimate on my PC, and wanted to add a Wi-Fi ability to it.
I have a Dell TrueMobile 1300 USB Adapter, so I tried to connect it to the desktop.
Windows didn't recognized it. I searched really hard across the internet - but couldn't find a proper driver to this device.
The only related thing I've found is a UTILITY from dell site (over here: [URL]
- but still - this installed only the Utility, not the driver. The adapter still stays "Unreconized" on my computer.
View 3 Replies
View Related
Nov 18, 2012
I have a Inspiron 1300 System-ME051 service tag-<Admin Note: removed per privacy policy~RK>.After reformatting the hard drive I have lost my drivers. My laptops orginal operating system was XP (home edition). I install xp professional service pack 2 since its the only CD I have available. where can I get a full factory cd or download all drive
View 1 Replies
View Related
Nov 18, 2012
I have a Dell Inspiron 1300 which crashed, service tag . I was able to start it again using the Dell Operating System Reinstallation CD for XP Professional with SP1, that came with another computer. I then installed a Windows XP Professional Service Pack 3 and Internet Explorer 8. However the wifi (wireless) does not work. I went to setup and assured that it is enabled. I assume that I have lost the driver for it. Before the crash it had a working wireless connection. I need to know what driver to install to make it operate. Setup indicates that my computer has a MiniPCI card 1370 Broadcom Corp.
View 1 Replies
View Related
Jan 20, 2012
Want to transfer email and email folders to a disk. I have Windows Vista on my computer and I use Comcast for an internet server.
View 2 Replies
View Related
Feb 23, 2011
If i want to send a packet from one host to another host through a router, how will the packet be sent? I mean what are the stages that a packet can reach to the destination.
View 6 Replies
View Related
Nov 13, 2012
How can I move the screen to the right because it is missing me a part so how can I do it?
View 1 Replies
View Related
Jul 15, 2011
Can I move my lynksys router to a new compuer and keep all the settings and MAC addresses that are set up or do I have to reset it and start all over again? I'm also installing a new modem.
View 2 Replies
View Related
Apr 3, 2013
Where can I find the drivers for my Dell TrueMobile 1300 PC Card....my Broadcom 440x 10/100 will not start the internet...heck, it won't even recognize it half the time an I bought it all as a set. I'm on a DELL INSPIRON 8600..
View 2 Replies
View Related
Dec 17, 2012
I'm upgrading ASA firewalls from a 5510 (running 8.2.2 code) to a 5515-X (running 8.6.1 code). What is the best way to move the existing config to the new firewall? Can I simply copy it?
View 2 Replies
View Related
Jul 10, 2011
I have two ssid's on my 1130ag each with different security when I use wep I can get my email on my droid. When i connect to the second ssid and use wpk I can get to the in the Internet but my email will not move in Exchange.
View 3 Replies
View Related
May 20, 2013
im trying to move the config from an 3750 to 3750 PoE but without using the PoE options.I have allready download the config with tftp and upload it to the 3750 PoE. Now the new config is stored on the PoE switch but some of the old setting are still there. Not sure why, i think the config only overwrite the settings which are in the conf file and the setting which are not in the conf file but enabled on it will stay on the switch.After the upload of the config file I deleted all the config I do not need by hand.They are some settings i can't delete and I don't know why, this are the sittings:
1. each fastethernet port has this option: "no cdp enabled" this entry was no availble on the old switch, is the any possiblity to remove this entry?
2. the same for "no mls qos rewrite ip dscp"
3 and for this one "vlan internal allocation policy ascending"
View 1 Replies
View Related
Apr 18, 2013
I'm trying to move some configurations over to an ASA5510 and some of the commands are a bit different than I'm used to (worked on old pix before)
I've configured the following on the device:
Outside interface: 65.66.64.34/28
DMZ : 65.66.64.49/28
Inside : 10.2.3.3/26
===========================
The current firewall has the below configured on it (old Juniper)
10.2.3.0/24 gateway 10.2.3.15 **10.2.3.15 is the IP for 3750 switch on the inside LAN**
10.0.0.0/24 gateway 10.2.3.4 **10.12.175.4 internal vpn- will remove later but thats a different discussion**
0 0 gateway 65.66.64.33 **to internet
10.0.1.0 gateway 10.2.3.2 **10.2.3.2 represents mpls traffic
[code]...
The current set up for this network has an mpls router and a vpn concentrator as part of the network my aim currently is to replace the juniper with an asa5510 the changing of the vpn tunnels will be for a different time:
work station ===> switch (3750) DG to =====> MPLS (vendor owned and managed) ====> non mpls traffic ====> vpn concentrator ===>firewall ===> router
The above will need acls to go with the routes, which I should manage ok just want to make sure the routing is configured properly
View 2 Replies
View Related
