My ISP has provided an internet conn., through a LAN wire which when connected to the laptop requires a login id/pwd on the browser.i have a iBallBaton 150m router, which i wnat to use to create a wifi setup.
View 1 Repliesi need to connect modem to computer with the length of 150m. suggest which way is efficient to connect. which cable is efficient. is any medium needed in between.
View 1 Replies View RelatedThis is what I have
2 x Desktop PC's, both with Windows 7
2 x working LAN Cables
1 x wireless Router
1 x USB Cell C Modem
This is what I want:-
Connect both PC's to one network through the Router
Internet working on both PC's
Internet working through the router as well (wireless for laptops etc in the house)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
This is what is happening:-PC's connected to the same workgroup through the router. Can play LAN games and copy and share files etc.Internet only on the PC that has the USB Modem connected. Other PC shows work group but no internet on that screen.I have shared everything on the working PC but yet the other one doesnt connect.how to activate the internet on the wireless router.how do I delete a workgroup on Windows?
I am having problem in configuring two computer in point to point to have internet connection on windows xp
View 2 Replies View RelatedI want to use two seperate ISP's internet connection in single nic card. How to do this?
One ip is 203.76.112.106
subnet 255.255.255.248
gate way 203.76.112.106
DNs 1 203.76.96.4
dns2 203.76.127.4
Another
ip 122.144.9.24
Subnet 255.244.244.224
Gate way 122.144.9.1
dns 1 202.84.32.22
dns2 202.84.32.23
how do i configure a laptop internet port. cos anytime i plug a cable to browse i dont get internet service?
View 1 Replies View RelatedToday we got a new cisco 7204 with NPE-G2 , so we wanna to configure to root for the internet so here is my scenerio
1- Public Ip address =155.155.155.20
2 Private Ip Address =192.168.2.0 /24
3- Gateway = 155.155.155.1
4-DNS Server = 194.155.12.133
Interfaces:
1- Gigabite 0/1 - We put this for Public ip address
2- Gigabite 0/2 - and this for Private Ip address
how to route this for the internet . after routed we want our client computers to get internet from Gigabite 0/2 Interface
I want to configure same internet setting 500 system, Like,active x control setting
View 1 Replies View RelatedAs per topology attached herewith, i have 2 ISPs, ISP1 and ISP2. And i have one Cisco 1841 Router with only 2 Ethernet interfaces.My Lan subnet is 192.168.1.0.My puspose is, i want to configure both ISP1 and ISP2 and my Lan Network on router, without adding any extra interaface. I also want to configure a nat so that Lan user can go to internet. I wabt to do this using 2 Interfaces.
View 17 Replies View Relatedis it possible to configure an ASA 5505 with two internet connections? One dedicated for VPN and the other one for Internet access only.
View 9 Replies View RelatedHow to configure internet access for different VLANs in cisco 3750 switc,ISP connection directly connecting to 3750 ,3750 have 18 VLANs
View 9 Replies View Relatedhave wireless d-link adsl modem router which usually use for adsl connection sharing, but i have a cable internet connection, so my question is can i share my cable internet connection with this router?
View 1 Replies View RelatedI have a laptop connected to internet via a router using WiFi.My desktop computer doesn't have a WiFi connection. I want to connect my laptop and my desktop computer using an ethernet cable in order to access the internet on my desktop computer. I've been fiddling around for over two hours with no luck so far. Both computers are on Windows 7.
View 3 Replies View RelatedI have a static ip , So how co configure my server 2008 for the access from internet [URL]
View 1 Replies View Relatedi am adding a wired router,during configuration i must choose between PPPoE,Dynamic,Static connection type. i have broadband cable isp
View 2 Replies View RelatedIs it possible to use a WAG160N as a straight forward router (wired & wireless) and to "switch off" the ADSL connection? I have a cable modem and planned to connect the modem to WAG160N by an ethernet cable and then assumed that it would connect to the rest of my network and use the modem as the route to the internet. But I cannot work out how to configure it to get this internet connection.
View 1 Replies View RelatedI've just started styding for CCNA. Bought a router 871W recently and spent two days straight trying to configure internet connection with no luck! I use console port to do the configs and SDM/CCP. How to do simple internet connection configs. I googled everything but it's still confusing. I can't assing any IP to FA ports 0 - 3. I used VLAN instead. But all tutorials use FA0 and when I try to assign an IP to FA0 it gives me some L2 can't be assigned or something... :/ And I'm also confused what IP address should I use for WAN. I plugged the cable from Modem to PC's LAN port and wrote down some IP addresses which I think I'll have to use to configure the router for internet connection. And here they are:
ISP IP: 76.114.54.255
SUBNET: 255.255.248.0
GATEWAY: 76.114.48.1
DHCP: 69.252.97.4
DNS: 75.75.75.75
75.75.76.76
Just bought a router RV042G for company. Why does the router configuration requires two IP addresses for the two ISPs. What if we only have one ISP? How should i correctly configure router for one ISP (internet provider)
View 3 Replies View RelatedI have to configure a default-factory firewall (ASA 5510) in a simple scenário like this image represents:At this moment i have configured the interfaces as represented above and at this moment what i want is grant access from a LAN computer (10.10.0.0/24) to the internet.
Should i configure some acl? I read that all traffic from an interface with a superior security level to other interface is allowed, so since my inside interface has a security level of 100 and the outside 0, it should be possible access to internet from an inside computer?!
From all configurations and examples i have seen around, they all contemplate a fixed IP address from the ISP, but in my scenário i have a dynamic one. This fact matter for the configuration i want to do?
My firewall is running the software version 8.2(5).
Cisco ASA 5510 and I want to configure it as an access gateway following this .[URL] the basic configuration steps on what to do on ASDM.
View 2 Replies View RelatedI'm trying to configure a Cisco router 1811 for Internet access, so here's my scenario:
2 ISP:
1º - 66.110.117.33
2º - 64.30.154.81
Internal Server:
172.16.30.2
how can I make all this traffic(SMTP,pop3,http,HTTPS,DNS) available in both interface?
I am having a cisco 861 series router.The Cable from the isp was connected to fastethernet4(wan port)
Following are my isp details
IP address:172.16.62.130
subnet:255.255.0.0
default gate way:172.16.62.1
dns primary:202.153.32.2
secondary:202.153.32.3
How do i configure this details in the router and access the internet in my devices.
i want the network to be in 192.168.1.0 to 254.
how do i configure my router with this details using cisco configuration professional
how to configure Fortigate 200B firewall in web base using pass internet through Cisco 800 router.
View 1 Replies View RelatedI have just changed my ISP and received a Thomson TG712 Modem, router and VoIP Gateway. Nice device, but I would like to extend my wi-fi network and connect a couple of PCs to another router in a different area using an almost new Linksys E4200 as a second router.I have already wired a network cable from the TG712 to the location where the E4200 is, tested the connection using a laptop, but cannot configure the E4200 to work receiving Internet service from the TG712.
View 2 Replies View RelatedI have IIS running in a machine inside my network and I would like to make is visible to the world wide web.To do that, I created a website in the port 8787, which is accessible when the user types 192.168.0.126:8787 in the browser. Of course it works only when the user is inside my network.(IIS running over windows server 2008 OS)Now I want to make it visible to the WWW, so I created a rule to make a port forwarding to it:I went to: Advanced > Virtual Servers and created a rule with the given information:
enabled
Name: website
private ip: 192.168.0.126
protocol: both
private port: 8787
public port: 8787
Schedule: always
This rule created automatically a firewall rule
Enabled
Alow
Source: WAN *
Destination: LAN 192.168.0.126 Protocol: * Port range:8787
always
Unfortunately it isn't enough, if I type myPublicIp:8787 I can't access the website because I either get "connection reset" error or a timeout.I pluged my computer directly in my modem and it worked perfectly.To make a test, I tried to enable the router remote administration on the port 10001. It didn't work.ps: my wireless router is a dlink di-524, I am writing this in this forum because I couldn't find the one related to my router...
I need to configure WAP4410N wireless access point for our company guest and visitors.i need them to only surf internet and not to go to LAN (servers).I think i need to create VLAN for this ? can any one tell me setting for configure only to surf internet thru WAP4410N ?
View 1 Replies View RelatedHow do I configure and set up my desktop to get on my neighbors internet connection with the netgear wireless adapter.
View 3 Replies View Relatedconfigure a router 1812 as failover, I walk with fixed ip internet link in Fe0 (need to determine the mac) and a dynamic ip link in FE1, other ports with a single vlan dhcp 172.20.16.1
I managed to do DHCP, connect to internet, to make nat vlan. But I could not do failover and load balance neither.
Currently I have an ASA setup as a Firewall with 1 outside interface and 2 inside interfaces. Initially, the Guest interface was setup to receive DHCP from the ASA and everything was working. I'm adding router and a server for the guest interface and what I'm trying to accomplish now is the following: ASA 5505 > Airport Extreme with a public static IP (69.xx.xx.6), handling DHCP and NAT > Mac Server as DNS Server.Right now, when I connect to my Airport Extreme with any computer, I don't have internet. I don't understand what's wrong. My DNS Server has a reserved IP address: 192.168.226.2 and it's pointing to itself and forwarding the ISP DNS servers, the Airport Extreme is handling the DNS Server IP and the ISP DNS Server IP but I can't connect to the internet from the server. [code]
View 31 Replies View RelatedWe have a RV120W Wireless-N VPN Firewall and we want to configure the router in brigde mode (transparent). Because we have another Firewall, use for filtering and default gateway on the LAN. The ISP provide IP address by DHCP, so we must connect the internet connexion to the WAN interface. But How can we do for connected the RV120W to our firewall? The router mode on the RV120w allows-it to make this configuration?
View 1 Replies View RelatedMy operations manager says "Could you go on-site and configure a new clients new internet connection?" I make the arrangements and go on-site. As I'm working with the providers tech he says "Do you have a sub-interface confgured for a dot1q VLAN id of 1057?", I say "What?". Anyway my firewall is not capable of dot1q VLAN, so he says "Do you have a Cisco router that can provide the trunking?", I say "Yes, I tink so but not with me". The question is can I use an SR520 between my firewall and the provider demarc to route the VLAN he is talking about? My initial discovery says yes but I am not quite sure of the details on how to achieve this on the SR520.
View 2 Replies View RelatedI'm trying to learn Cisco ASA IOS commands, I have bought myself a 5505 ASA for my home network and plan to implement it. How best to configure it.
I have attached a diagram of how I want my network to look. The internet connection is via the Virgin Media cable modem.
I configure for our office site to site VPN project. Now I configured already Site to site vpn between ASA 5510 and 1841 router.
HQ LAN
Branch LAN 10.2.1.0/24 >>> ASA 5510>>>>> 1841 >>> INTERNET <<<<<< 1841 <<<<<< 10.30.3.0/24 ^^^^ Call Manager 2851
Now can access from Branch LAN to HQ LAN each other. I face the problems that are
1) In branch LAN , they can access HQ LAN & resource , but cannot access internet. I didn't configure NAT on PH Router
2) Can I access internet from BRANCH LAN through HQ LAN to INTERNET. Or Can I access Internet from Branch LAN from PH Router directly while access to VPN to HQ LAN ?
3) In Branch Site , hard phone cannot work but soft phone on PC can call to HQ. Hard phone IP are same in Remote Network (172.16.1.0/24 ) . Is it problem ? how can I configure separately ?