Cannot Configure The E4200 To Work Receiving Internet Service From The TG712

Jul 15, 2011

I have just changed my ISP and received a Thomson TG712 Modem, router and VoIP Gateway. Nice device, but I would like to extend my wi-fi network and connect a couple of PCs to another router in a different area using an almost new Linksys E4200 as a second router.I have already wired a network cable from the TG712 to the location where the E4200 is, tested the connection using a laptop, but cannot configure the E4200 to work receiving Internet service from the TG712.

View 2 Replies


Can Ftp Service Work Without Internet?

Oct 25, 2012

I just want to know if FTP service can be done without internet? I want to setup my file transfer locally just w/n the campus.. All resources will be centralized in one server..

View 4 Replies View Related

Linksys Wireless Router :: Configure One Of GigE Ports On E4200 To Only Work On Guest Network

Mar 17, 2012

Is there a way to configure one of the GigE ports on the E4200 to only work on the "guest" network?  Basically I have a need to setup one of those ports to get to the Internet, but I don't want it to be able to get to anything else on the private side. 

View 1 Replies View Related

Linksys Wireless Router :: E4200 Wake On Lan Doesn't Work Over Internet

Aug 12, 2011

I'm having a problem with Wake on Lan.  (I'll bet you never guessed from the title, eh?).  I have an E4200 and I can not get WoL to work over the internet.(I'm assuming it's not actually going out to the internet when I wirelessly wake it using and the subnet, but rather the DDNS name is being resolved through the ARP cache, but I don't know.  I'm still learning) Consequently, if the sentence above in parenthesis is correct, I am unable to perform WoL from outside my LAN.  What am I missing?

View 3 Replies View Related

Linksys Wireless Router :: Does Internet Access Policy Actually Work On E4200

Mar 7, 2012

I'm just about to trade-in an E4200v2 for a E4200v1, primarily to regain the "Internet Access Policy" capability.
Just wanted to do a reality check with those of you who tried/use IAP... does it work basically as advertised?
I would be using IAP to specify MAC addr's of devices, blocking them from certain URL's and limiting their hours of Internet access.
And I plan to have Linksys's DHCP Server turned OFF, since my Windows Server handles DHCP on my network.
Should I expect all of this to work OK?  No major reliability problems with IAP?

View 5 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 Cannot Work With Two Service Policy Rules

Feb 21, 2013

I have an issue about ACS v5.3 Appliance.I have an ACS v 5.3 wo authenticate wireless users, together with a cisco wlc. One profile is to corporate users and the second profile is to guest.
The corporate users should authenticate with Active Directory and the guest with WLC. Guest users should authenticate with the ACS Local Database. I have configurate two service selection policy that match with protocol Radius. The first rule is to users of Active Directory and the second is to users in
the Local Database of ACS.When i try to authenticate users with active directory is OK, but when try to authenticate users with Local Database (Guest Portal) the ACS try to find the
the internal user in the Active Directory, because math the first rule, and the second profile can not authenticate.When I change the order, first the Rule of internal users and second the rule of users of Active Directory, the internal users can authenticate in to ACS, but
the users in the Active Directory can not authenticate.I think my ACS only authenticate the first rule of radius to Active Directory, no two rules of radius in the same time. Or maybe exists an issue in OS of the ACS.The authentication by separately is OK.

View 5 Replies View Related

Cisco WAN :: 881G Getting Service And Configure

Feb 1, 2012

Have customer that we need 3G at new location.  Their company is an AT&T customer.So we have got from distribution a 881G and it has a PCEX-3G-HSPA-US card with it.What do you do or need to get AT&T service on this card.  You call AT&T they don't know what your talking about if you say Cisco 3G card?I don't see a SIM slot which most AT&T device have a SIM card?Is there somewhere special you have to call for these to get service? Any checklist for ordering and also configuring for AT&T?FYI, we will do DHCP with it and it will be our backup ISP on and ASA if the primary internet goes down.  We will just use a 172.30.x.x addressing between the ASA Outside-Backup interface and the 881G.

View 1 Replies View Related

Cisco :: How To Configure Quality Of Service On 2950

Feb 7, 2011

I am trying to figure out how to setup quality of service on my network. At the moment i have computers connected to the PC port of my IP phone and the IP phone connected to the switch.I want the PC to stay on the default native VLAN and the phone to go on the VLAN 10I am using SNOM300 and SNOM360. I will configure the on the phone the VLAN ID and the priority.From my research, there are two ways that I can go about this on the port that is connected to the phone I canswitchport voice vlan vlan-idorswitchport voice vlan dot1pand then I will have to execute the commandmls qos trust cosmy question is which command do i use to configure the ports, and am I on the right track? Also, this is how I configure the ports that the IP phones are connected to, how do I configure the port that my Asterisk PBX server is connected to?

View 4 Replies View Related

Wnr834m / Adding Custom Service On Netgear Port-forwarding Will Not Work

Sep 16, 2011

I am trying to set up a custom service on my netgear configuration page. I have a netgear router model# Wnr834m. every time i click the "add custom service" button the page redirects to "system authentication failed" and logs me out. What can i do to set up the new port?

View 1 Replies View Related

Cisco :: MIR Feature On MSE 3350 Requires Context-Aware Service To Work

Oct 21, 2009

Does the MIR feature on the MSE 3350 requires the Context-Aware Service to work?  I read that the system uses location, signal strength and coverage data in conjunction with monitor mode APs at each exit to trigger the roam.   I just don't know if MIR does this on it's own or needs to get location from Context-Aware service.

View 2 Replies View Related

Cisco :: Configure A Dhcp Service On A Router For Some Vlans?

Apr 20, 2012

I'm trying to configure a dhcp service on a router for some vlans.I would like to give the range - to vlan 10, - to vlan 20.for some reason it doesn't work?here's the config.

ip dhcp excluded-address
ip dhcp excluded-address
ip dhcp excluded-address
ip dhcp pool vlan10


View 10 Replies View Related

Cisco VPN :: Configure L2L VPN Tunnel To Service Provider Using ASA 5505

Jun 3, 2012

I am trying to confgure a L2L VPN tunnel to a service provider using an ASA 5505.My problem is that the service provider will not accept traffic from a LAN subnet, they will only accept traffice from a public IP.We have a small public subnet of x.x.x.50/, our public IP (outside interface IP on the ASA 5505) is x.x.x.50 and the service provider wants to see traffic coming from us on x.x.x.51How can I NAT our LAN subnet ( to one public IP (x.x.x.51)?

View 14 Replies View Related

Desktop Sending And Receiving But Still No Internet?

Apr 18, 2013

I had a customer call me and her desktop (wired connection only) is sending and receiving packets but she still cannot connect to the internet. Customer has tried power cycling her modem, router and desktop with no avail. Her system is running XP.

View 13 Replies View Related

Can't Connect To Internet - Not Receiving Packets

May 12, 2011

I cant connect to the internet. When I use other networks its fine. Also all the computers in this network im trying to connect to can connect and work perfect. I know i have the WPA code right. Its sending but not recieving any packages. The IP address so i know its not working right.

View 14 Replies View Related

Wrt54gx2 - Router Isn't Receiving Internet?

Oct 27, 2012

I have this new linksys wrt54gx2, my laptop connects to it, my modem LAN light comes on when its plugged into it via Ethernet cable . I can access my router settings.

View 19 Replies View Related

Cisco :: Configure Load Balancing In MPLS Between Two Different Service Provider?

Dec 19, 2012

How to configure load balancing in MPLS between two different service provider.

View 4 Replies View Related

Cisco Switches :: How To Configure In SF300 To Take Dhcp Service From Router 827

Feb 16, 2013

I have struck in my some network configuration.  I have two sf300 switches and cisco 827 router.  Actually sf300 does not support dhcp server.  I took cisco 827 as dhcp server and i create 4 dhcp pools in it. How i can configure in sf300 to take dhcp service from cisco router 827.  Isit possible to configure 827 with bvi interface, when i was try i got below error.  how to configure bvi interface and i will link that bvi to vlan on sf300. error in 827 router, How i can connect two sf300 switch for redundancy ?  I connected giga4 SW1 and giga4 SW2 and mode trunk isit good or any other way i need to connect it.?

View 3 Replies View Related

Internet Connection Is Continuously Transmitting And Receiving?

May 11, 2011

My internet connection is continuously transmitting and receiving, even when there is no application running! is there any way to find out what is being transmitted or received and how to reset the connection?

View 3 Replies View Related

Linksys Wireless Router :: WRT100 - How To Disable Automatic DNS Name Service Configure

Dec 9, 2011

I have a WRT100 wireless router, which is configured for a PPPOE connection to my ISP.  After running one of the tools to determine responsiveness of DNS name services, I would like to manually configure my DNS services, placing a more responsive service as my first DNS choice.  In the router administration, I can configure three static DNS IP's. However, I don't see any place in the configuration to turn off the automatic DNS configuration from my ISP.  So, when I issue an IPCONFIG /ALL on my computer, the DNS listing shows two DNS Name Services from my ISP ahead of the three static DNS IP's that I configured. 

View 3 Replies View Related

Cisco Firewall :: Configure ASA 5505 With TimeWarner Business Class Service

Apr 30, 2013

I'm trying to support a friend. They just switched to TWC Business Class from Megapath. They have a Cisco 5505 ASA and are trying to configure it to work with the new TimeWarner cable modem. But we can't get PCs behind the firewall out to the Internet.
We think it should be a pretty simple config. They have the ASA connected directly to the modem. The modem is running DHCP, and we''ve configured the ASA to get its address via DHCP. We have a Windows server behind the firewall; it can't get out the Internet either. It's set up to be a DHCP server and is giving IP addresses to the PCs on the network.
Laptops connected via wifi to a wireless router attached to the modem are able to connect to the internet, thus we know the modem is up and running fine.
Here's our running config:
ASA Version 8.4(1)!hostname ciscoasadomain-name opanslab.comenable password yYME2neTGgA0S1./ encryptedpasswd yYME2neTGgA0S1./ encryptednames!interface Vlan1nameif insidesecurity-level 100ip address


View 5 Replies View Related

Cisco Switching/Routing :: How To Configure Sm-es2-16-p Service Module To Route Over 2911

Jun 17, 2012

Any example of how to configure an sm-es2-16-p service module to route over an Cisco 2911?

View 2 Replies View Related

Cisco WAN :: Unable To Configure Service Policy Output Command In 2921 Router

Apr 25, 2011

I am not able to configure Service policy output command in Cisco 2921 router.While configuring I am getting below error.Same config is working fine in Cisco 3845  router.I am suspectting the problem with license in IOS.

View 3 Replies View Related

Dell :: WLAN Auto-configure Wireless Service Will Not Restart On Inspiron 1545

Feb 3, 2010

Wireless service on Dell laptop computer had been running fine for 4.5 months until underground Comcast cable failed, presumably due to freezing and thawing in cold New England soil.  All Comcast service went out, TV, Internet cable modem, etc.  Service was restored with above ground cable, and wireless service returned to other devices in household, but not the Dell laptop.  I am wondering if my wireless card itself was damaged in the event, as no software fixes I have tried have worked.  However, the device manager says the Dell Wireless 1397 WLAN Mini-card is working properly and the driver software for the service is up to date.

Some of the messages I have received from various command line and dialogue box attempted fixes:

Dell Wireless 1515 Adapter Device Not Found

There are currently no wireless adapters available and enabled

Cannot repair adapter because wireless service is not running

Windows could not start the WLAN AutoConfig service on Local Computer

Error 0xc00 ce508 : 0x00 ce508

There might be a problem with one or more network adapters on this computer

 When I did this

>Set Autoconfig Enabled=Yes Interface=”Wireless Network Adapter” <enter>

The response was this

>The Wireless Autoconfig Service (WLANSVC) is not running

When I was in administrator mode and ran SFC/SCANNOW the response was this Windows Resource Protection found corrupt files but was unable to fix some of them Details are included in the CBS.Log  WindirLogsCBSCBS.Log  For example C:WindowsLogsCBSCBS.Log Other command line responses:

Wireless LAN Adapter Wireless Network Connection:

Media State… Media disconnected
Tunnel adapter Local Area Connection* 6:
Media State…  Media disconnected
Tunnel adapter Local Area Connection* 7:


Other information about the computer:

Inspiron 1545, Dell BIOS version A10, BIOS date 7/17/09, running Microsoft Windows Vista Home Premium, Processor Pentium (R) Dual-Core CPM T4200@2.00 Ghz, Network Card Adapter Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller, Wireless 1515 WLAN Half mini card (Atheros).

View 1 Replies View Related

Protocols / Routing :: Windows 7 Laptop Connected But Not Receiving Internet

Jan 26, 2012

I have a windows 7 laptop and i have bridged my wireless with my ethernet port on it, i have directly connected my ubuntu server to my windows 7 laptop via crossover, and ubuntu says its connected, but it will not recieve internet. I can get 2 windows pc's to bridge successfully, but not a linux machine. Is there some configuration im missing or something that i missed? the goal is to get internet for my ubuntu server.

View 3 Replies View Related

Wireless Internet Drops When Receiving Or Making Phone Call?

Apr 6, 2011

I have an Orange Livebox connected wirelessly to my laptop. Everything's been working fine until the last few weeks. Whenever I receive or make a call using my iDECT s2i cordless telephone the internet drops and it takes ages to reconnect. I've checked all the connections and every phone socket has an ADSL filter. I understand that some wireless devices can affect a router and that these are usually 2.4ghz devices but I have no idea if my cordless telephones are 2.4ghz or 5.8ghz or indeed if this is the source of the problem at all.

View 2 Replies View Related

Linksys Wireless Router :: VOIP Does Not Work Via E4200?

Jul 25, 2011

I have a new Polycom Soundpoint IP550 VOIP phone that was not connecting via my old WRT54GS router.  I purchased a new router, the E4200, thinking it was just the age of my original router.  It also will not allow the VOIP traffic through.  I can connect the VOIP phone directly to my CenturyLink modem and it works.  But when I connect it back to the router it stops.  
I contacted Cisco support and they had me upgrade the firmware to 1.0.02 build 13  May 24, 2011 version.  Also adjusted down the MTU to 1364. That still did not work so they told me to take the router back to the store.  I have not done that yet as I want to ensure that the router is really broken and not that I am missing a setting.  The tech said that I should be able to plug the VOIP phone into the router and make NO additional changes.

View 1 Replies View Related

Linksys Wireless Router :: E4200 With Mac Lion Software / Will It Work

Jan 10, 2012

I just purchased a new E4200 router. When I try to set it up, , it says that my software (Lion v. 10.7.2) is unsupported. Is there a download that will allow me to use this router?

View 2 Replies View Related

Linksys Wireless Router :: E4200 Port Forwarding Does Not Work?

Aug 18, 2012

I set up my new E4200 to forward port 7300 to a computer on my LAN.  I had this working on my Linksys WRT160N and copied all of the settings so they are identical to those on that router but forwarding does not work.  I have tried single port forwarding, multiple port forwarding and even DMZ with the same lack of results.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Work As LAN Print Server?

Dec 6, 2011

I have an HP LJ4050 plugged right into one of the open LAN ports on my E4200 with a CAT6 cable. Can this router work as a LAN print server? I can't pull up the IP on a browser window or ping it successfully.The 4050 doesn't have USB capability and I don't want to use the parallel port on my PC unless I have to.If possible, I'd like to have wireless computers on the network be able to print to it as well.

View 5 Replies View Related

Linksys Wireless Router :: Windows Backup Will Not Work With E4200?

Jul 6, 2011

why Windows Backup in Windows 7 pro 64 would not backup over the network to a drive I have connected to the 4200s USB port? Everytime I run it I get a Access Denied error at the end, even though data has been transfered. After about 5 hours of searching both here and Microsoft's website, I just get lots of people with the same issue that hasnt been resolved anywhere consistantly.

View 1 Replies View Related

Linksys Wireless Router :: URL Blocking Doesn't Work On E4200

Oct 17, 2011

I have the 1.0.03 firmware installed and URL blocking doesn't work.  I assigned the policy to the entire address range and could still access the web site I wanted to block.

View 1 Replies View Related

Linksys Wireless Router :: Does E4200 Work With USB 3 External Enclosures

Mar 22, 2012

I'm looking to purchase the E4200 and use an external HDD with enclose as a NAS (probably just a backup drive), specifically this model. [code]The HDD would be a 1TB Samsung Spinpoint F3.Does this router allow for USB 3 connections or at least fallback to USB 2?  The first comment on the external enclose says so otherwise.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Causes Canon Scanner Not To Work

Apr 13, 2012

Model name: Linksys E4200
Model number: E4200
Firmware version:
Operating system: Windows XP SP 3
Software version: 1.4.12005.2
Connection type (WAN): DHCP
My Canon MX882 multifunction printer is connected to the router via USB cable.  The printer works.  The scanner does not work.

View 3 Replies View Related

Copyrights 2005-15, All rights reserved