Configuring TPLink WR841ND As Repeater?

Nov 30, 2012

I'm trying to configure mine as a wireless repeater, but to no avail. Here's what I've done so far: disabled WPS changed my router's IP to 192.168.0.2 (because the source router's IP is 192.168.0.1) rebooted the router enabled WDS, found the network I want to repeat using the Survey feature, then filled in the WPA2 password. enabled WPA2 security on my own repeated network, using the same authentication type and password as the original rebooted the router.

My router complains that "WAN port is unplugged", and it doesn't get a WAN IP or incoming packets, which probably means it's expecting the internet signal to come from the WAN port rather than the wireless network I set up, right? How can I force the router to connect to the network? Also, should both routers be in the same subnet? I've tried with different subnets but nothing changes. The source router is a D-Link DIR-600.

View 4 Replies


ADVERTISEMENT

Using TPLink TL-WA801ND As Repeater And Connect PC Also?

Dec 26, 2011

I want to use TP-LINK TL-WA801ND as a repeater, at the same time I need to connect one PC to this repeater by UTP cable (the router has one RJ-45 port) will I be able to successfully connect this PC to internet using this router as a repeater ?

View 6 Replies View Related

Configure Tplink Modem On Repeater Mode In Order To Repeat Signal From (Huawei)?

Dec 4, 2011

That's y topology:

(TPLINK) /////////////// (Huawei)--->(internet)
...................wirless................cable

I want to configure my tplink modem on a repeater mode in order to repeat the signal from (Huawei) ...

View 1 Replies View Related

TP-Link 300Mbps Wireless :: WR841ND / WR541G - Configuring 2 Routers To One Cable Modem

Mar 29, 2013

Region : UnitedStates
Model : TL-WR841ND
Hardware Version : V8
Firmware Version :
ISP : optimum online
I have two wireless routers:
TP Link TL-WR841ND
and
TP Link TL-WR541G

I would like to:

use the TL-WR541G for my children wireless laptop, wireless ipad and wireless iphones.
I can turn this unit off at a specific time each evening as I wish.

The WR841ND is used for my wireless laptop, wired iMac, wired Roku stream player and wired Voip adapter.

I tried a few things but really do not know what I am doing and I cannot get both wireless routers to access the internet.

What I tried so far:

Cable modem ethernet out to the input on the WR841ND router. took one of the four hardwire outputs from the WR841ND and ran into the input on the WR541G I powered on the cable modem....it booted... i then powered each router up and waited for each to boot. I launched web browser and navigated to : http://192.168.0.1/ this allowed me to setup the WR841ND router.

it's current settings:
Firmware Version: 3.13.27 Build 121101 Rel.38183n
Hardware Version: WR841N v8 00000000
WAN type: dynamic IP
LAN IP address: 192.168.0.1
subnet mask: 255.255.255.0
DHCP Server: enabled
Start IP: 192.168.0.100
End IP: 192.168.0.199

How do I set up the second router? I tried to disable the DHCP server on router 2 (WR541g) and change the IP but don't know what to change it to.

View 3 Replies View Related

Home Network :: Configuring Access Point Tplink TL-wa5110G With Wireless Router?

Jan 3, 2013

I have a tplink acess point TL-wa5110G . I have WISP ( wireless internet service provider). I have configured the acess point on wisp client router mode and wan type to pppoe gave the username and pwd..Now i want to share internet wirelessly. now my question is that can i connect the aces point to wan port of the wirless router to share internet wirlessly? Because i have seen the instruction figure in tplink access router where they have shown that u can connect it with with unmanage able switch to share it to wired lan.i want to ask can wirless works to share internet if i use wireless router to access point.

View 1 Replies View Related

Cisco Wireless :: Configuring 1232AG As Repeater

May 26, 2011

I have a Cisco Aironet 1130 Series setup as a Root AP and a Cisco Aironet 1200 Series Access Point setup as a Repeater. However i cannot get this to work. I can connect fine to the Root AP but not to the Repeater.
 
I receive the folloiwng error on the Repeater AP.
 
'*Mar  1 00:00:24.887: %DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: No Response'
 
The Root access point is connected to a Cisco router (192.168.168.1) which is the gateway to outside and is also acting as a dhcp server.
 
Both SSID's and  authentication/encryption match.
 
Im using the the below mac-address for Authenticating the Repeater to the Root with the parent 1  command. Should i be using the mac address of dot11radio 0 of the Root AP??
 
AP_Root#sh interfaces dot11Radio 0Dot11Radio0 is up, line protocol is up  Hardware is 802.11G Radio, address is 001b.2b69.6ca0 (bia 001b.2b69.6ca0)  MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,     reliability 255/255, txload 1/255, rxload 1/255

View 5 Replies View Related

Cisco Wireless :: 5508 - Configuring Repeater To Wlan Controller?

Jan 1, 2013

I have Cisco 5508 Wlan Controller Software version 7.2.103.0 and I have Cisco AIR-CAP3602I-E-K9 Lightweight Access Points network and its working fine now I want to configure the Repeater in this network.  Because there is one area we cannot layout the cable.  How to add the repeater and how to configure the repeater in wlan controller network.
 
Do i need the change the software of Wlan Controller to support Mesh Network or this version 7.2.103.0 can support the repeater because for 1 access point i dont want to upgrade the version.

View 22 Replies View Related

Linksys Wireless Router :: E2000 - Configuring Second One As Repeater Access Point

May 28, 2011

I just purchased 2 E2000 routers at BB and was assured the second one could be configured as a repeater access point. Some current messages indicate this is not possible.Will a Cisco moderator please confirm and clarify repeater options.

View 2 Replies View Related

Cisco Wireless :: Configuring Root Access Point And Repeater In 1252-AG-A-K9?

Dec 19, 2011

how to configure Cisco 1252-AG-A-K9 Access Point Root and Repeater?

View 9 Replies View Related

Set Up Wr841nd As Wifi Extender?

Feb 23, 2013

I bought this router to extend my wifi signar from my cable router. Now I know that it is possible using the WR841ND as an wifi extender using third-party firmwares but what I like to know is if there is any way to make the router work like that but using the original firmware. I followed a guide that explained how to do it but the only thing I can do is extend the wireless signal without the internet acess.

View 1 Replies View Related

TL-WR841ND - How To Configure 2 Different Wireless Routers With One Modem

Mar 22, 2012

Recently I had changed my ISP and I get a brand new modem and a D-Link DIR-615 wireless router, but the problem is the wireless signal is not strong enough to reach second floor, so I decided to get a new TP-Link TL-WA901ND access point and after configure the AP to repeaters mode, I saw it has traffic coming throughout to the AP but my PC cannot get any internet connection not even an IP address. When I was facing this problem, I thinking of is that possible using my old wireless router which is TP-Link TL-WR841ND to have a internet connection working with D-Link wireless router, I had tried plug my TP-Link router LAN port to D-Link router LAN port with a network cable and setting into same IP range (192.169.0.xx) but cannot get any traffic getting through.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND Router Can't Get WAN IP

Mar 25, 2013

Region : Germany
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : 8.1
ISP : M-Net

I set up my router and it does not get a WAN IP.The PPPoE user/pw ist 100% correct but in the "status field" it always says: "connecting" and i can't get an IP.The router is connected with the modem via RJ45 cabel that was in the box.My PC has no problem getting to the internet with direct modem communication (pppoe).

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND - How To Set For Wake On Lan

Mar 30, 2013

Region : Others
Model : TL-WR841ND
Hardware Version : V7
Firmware Version :
ISP :

my ip address is not static i use no-ip sevice to get dns how to set my tp link for wake on lan

I managed to update ddns in my tp link How do I go from here?

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND Network Goes On And Off

Nov 29, 2012

Model : TL-WR841ND
Hardware Version : V8
Firmware Version : 3.13.18

I recently bought a wireless N router (TL-WR841ND). I could connect my laptop to internet using the router but the problem is whenever I try to connect my phone to the wireless network, it goes on and off. It'll be on for a few minutes and then it is off and so on. By the way, the phone says you're still connected to the router but actually there is no real internet connection. But anyway, my laptop is connected to internet anyways!

I am living in a dormitory. And the website of the ISP is url... which provides dynamic IP. I have already tried different LAN IP adresses.I have already tried MAC Clone for WAN but nothing changes.I'm in a dormitory, there is also other routers here, could it because of conflicts with the other routers? [code]

View 4 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND - Network Goes On And Off

Nov 29, 2012

Region : Germany
Model : TL-WR841ND
Hardware Version : V3
Firmware Version : 3.13.18
ISP : [url]...

I recently bought a wireless N router (TL-WR841ND). I could connect my laptop to internet using the router but the problem is whenever I try to connect my phone to the wireless network, it goes on and off. It'll be on for a few minutes and then it is off and so on. By the way, the phone says you're still connected to the router but actually there is no real internet connection. But anyway, my laptop is connected to internet anyways! I have already tried MAC Clone for WAN but nothing changes.[code]....

View 1 Replies View Related

TP-Link TL-WR841ND Wireless N Router - How To Transmit Internet

Apr 29, 2011

I need a wireless router to transmit internet in my home, it's on two floors, my only concern is that the floor is really thick and I'm gonna be working in the basement. I need to choose between the following, can you tell me which is best?

View 1 Replies View Related

Tp-link 300mbps Wireless :: Pc Attached Via Lan Or Wifi To Wr841nd Can Ping Only

Nov 5, 2012

Region : Italy
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : TL-WR841ND_V8_120802I

Setup the WR841ND in wds and easily connect to d-link.with the ping utility of the WR841ND I can reach the d-link or any of the PCs attached to the d-link and receive an answer.but any PC 'attached via LAN or WIFI to WR841ND can ping only WR841ND and not the d-link or any other PC attached to the d-link (clearly not even go on the Internet

View 12 Replies View Related

Tp-link 300mbps Wireless :: Wr841nd Wifi Lock Up After Some Time

Jan 6, 2013

Region : Mexico
Model : TL-WR841ND
Hardware Version : V8
Firmware Version :
ISP : Telmex fiber

I use this router to replace the FO rooter that my ISP provides with the service as it's too limited (no NAT name translation, closes NAT, no uPnP etc...)

So the WR841ND acts as my main router, DHCP server, WiFi AP for all my network. My problem is that once in a while ( every 1 or 2 days) the wireless loses functionality, I still can see it from my devices, but can't connect, even fixing the IP (apparently not a DHCP issue then). The only way to fix this is to shut down the router 10 sec and restart it.

This brings another issue, I have another router (WR741) in WDS dispatching the signal to another part of the house to wired devices (Xbox , wd tv live hub) and it loses the WDS link, again the only way for this router to recover it is to restart it which is annoying.

View 5 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND - Unable To Connect Printer

Feb 20, 2013

Region : UnitedStates
Model : TL-WR841ND
Hardware Version : V5
Firmware Version :
ISP : charter cable

I am trying to install a HP officejet 6700 all-in-one wireless printer on my home network. I can see the MAC and static IP addresses in the ARP list but fail to connect to it via my laptop. I have disabled the Norton Internet Security smart firewall and the windows firewall and still fail to connect. I have spent 2 four hour chat sessions with HP and they tell me it is my router. They had me change the channel to 6 from 5 and 11g-only from the 11gb-mixed and it still does not connect. They also had me do a firmware upgrade but the Printer was up to date.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND Port Forwarding Not Done Properly

Mar 16, 2013

Region : Malaysia
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : 3.12.9 Build 120221 Rel.31475n
ISP : UNIFI Telekoms

I am doing port forwarding for 2 webservers i have IP Address is 192.168.0.2 and 192.168.0.4 Both have web apps running find within LAN, both run on port 80.Error code: 14004.

View 8 Replies View Related

Tp-link 300mbps Wireless :: Setting Up Wr841nd As Wifi Extender?

Feb 23, 2013

Region : Portugal
Model : TL-WR841ND
Hardware Version : V8
Firmware Version :
ISP :

Yesterday I bought this router to extend my wifi signar from my cable router. Now I know that it is possible using the WR841ND as an wifi extender using third-party firmwares but what I like to know is if there is any way to make the router work like that but using the original firmware. I followed a guide that explained how to do it but the only thing I can do is extend the wireless signal without the internet acess.

View 5 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND - Extremely Slow Speed With Wds

Apr 24, 2013

Region : Others
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : wr841nv8_en_3_13_27_up_boot(121101)
ISP :

I followed TP-Link's guide to set up a WDS connection between my two brand new WR841ND router. It theoreticaly "works", but the network is extremly slow. Copying a ~100 Mb sized file to another computer on the other side takes more than 10 minutes or more, I don't know exactly, because I shut down the process after 10 min. I pinged the "slave" router with 200 packets, and I realized that every third, fourth and fifth packet has more than 500 ms time. The minimum is 4 ms, the longest was 566 ms.

Router A (Master)
Connects to the internet/ADSL
DHCP enabled

[Code].....

I bought the two router from the same dealer, at the same time. Both have the same firmware. I checked all the chanels, and 5 is the only free one, but the situation is the same on every chanel.

What can couse this very slow transfer speed?

View 5 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND - Slow Internet Speed Using Router?

Jan 16, 2013

Region : Brazil
Model : TL-WR841ND
Hardware Version : V7
Firmware Version : 3.13.9 (Last)
ISP : NET Virtua

I've bought a TL-WD841ND and was using it normally.

After I arrived from a trip, the internet speed by wireless and by cable is only 0,5~0,7 Mbps...

My internet connection is 10 Mbps, and if I plug direct on the modem, there comes the real speed (9,7 Mbps), but connecting by the router, the speed is 1/20 of what should be. Before my travel i was using it normal, and no one has changed any configuration.

So i've updated to the last firmware avaliable on the website. So i've rebooted it and the "configuration" LED keeps flashing...

I would like to know if this led flashing is normal: (here is a video that i've done: [URL] and what could be happening. ps: connecting by cable, the internet speed is also the same (even after the factory settings reset)...

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND - Failed To Verify Router Settings

Feb 2, 2013

Region : United Kingdom
Model : TL-WR841ND
Hardware Version : Not Clear
Firmware Version : 7.1
ISP :

failed to verify router settings

What's wrong with my router?

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND - LAN Freezes With High Bandwidth Usage

Jan 13, 2013

Region : Romania
Model : TL-WR841ND
Hardware Version :
Firmware Version : 3.13.27 Build 121101 Rel.38183n
ISP : cosmote

hardware version is WR841N v8.wireless works just fine. i use it for my smartphone and an old laptop. i use ethernet cable to connect to main computer where all is ok until i start using my bit torrent client. as soon as i build up traffic above 1MB the ethernet portion of the router freezes and needs a reboot. when frozen, wireless is still working and i still have access on the lan to the router via my browser. i got this router so i could have wifi for my phone. my old router (asus rx3041) worked just fine and i accessed my isp at the maximum speeds it would allow on a 60 gigabit connection.

View 9 Replies View Related

TPLink - Cannot Connect To Router Or Internet

Nov 13, 2012

I have a TP-Link wireless router which we have always been able to connect to the router with these laptops. My sister has come over to use our internet, which has worked before on her laptop, but now all of a sudden she can't connect to our router, it won't even allow her to type in the password it just says Windows can't connect to the network. I then tried one of our other laptop and after much battling it also refuses to connect to the router. eventually it did, but it still can't connect to the internet.I sat on the phone for about a hour with our network provider (I am from South Africa), and after trying many things, it still won't work. The guy said that there is nothing more to try.

[code]....

View 14 Replies View Related

TL-WR542G - Tplink Router Became Unresponsive?

Jun 18, 2012

So I am an owner of this router for the last 2 years: TL-WR542G - Welcome to TP-LINK . Today it died on me. All of its leds are lightning up, but it doesn't provide a wifi network, and won't give me an interface when i try to access it through 192.168.1.1 on my desktop . There seems to be nothing I can do about it , I tried pushing the reset button on it's back but it does nothing at all.

Do I have any other options to get some life back into it?

View 1 Replies View Related

Cisco / TpLink - Connect Two Different Routers Together?

Aug 29, 2012

My company has a cisco router which i do not know the password the cisco router has internet connection and this connection allow only sx computers with static ip to connect to internet the range of those ips

(216.147.155.90 - 216.147.155.94)

the defualt gateway of my company router is

216.147.155.89

subnet mask is 255.255.255.248 so it is from class C,my and my friends brought a Tp-link wireless router and we are trying to connect it to internet but what i know is all of the ips (the range of the ips of my company router is used by others) how can I connect my router to my company router?

View 1 Replies View Related

TPlink Router - Unable To Access Internet

Jul 23, 2012

I am able to connect to TPlink router through my pc but unable to access internet.The router is unable to detect dynamic ip.

View 1 Replies View Related

TPLink TLWR941N - Remote Desktop Behind A Router

Mar 20, 2012

I looked at portforward.com and have forwarded port 3389 in the modem with the ip address set to the router's address. I've also forwarded 3389 in the router to the pc's address.

View 14 Replies View Related

Best Solution To Extend Signal Of Tplink TL-WR10

Feb 14, 2013

which will can extend the signal strength? changing antennas, put a wireless amplifier or buy ASUS 66U??change TPLink TL-WR1043ND to ASUS 66U ??? ASUS 66U is best to TPLink TL-WR1043ND and can extend the signal strength by up to twice the distance?

View 1 Replies View Related

Connect TPLink And Linksys Routes Wirelessly?

Dec 10, 2012

Connecting 2 wireless routers to get access to Internet all over my home.The plan is to connect ADSL Modem to TPLInk router making it a gateway. Then connecting LINKSYS to TPLINK wirelessly so that any computer or device connecting to Linksys router should get access to internet.

View 1 Replies View Related

TDW8950ND - Access TPLink Configuration Settings On 192.168.1.1?

Oct 9, 2012

have been trying to access 192.168.1.1 TPLINK Model TD-w8950ND configurations to ensure settings are correct and check password etc.

Have been unable to, I used to access it immediately, but for some reason, now I can;t after changing laptops. Not impressed. May have to reset laptop to factory settings as last resort. Don't know.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved