I want to use TP-LINK TL-WA801ND as a repeater, at the same time I need to connect one PC to this repeater by UTP cable (the router has one RJ-45 port) will I be able to successfully connect this PC to internet using this router as a repeater ?
View 6 Replies
I'm trying to configure mine as a wireless repeater, but to no avail. Here's what I've done so far: disabled WPS changed my router's IP to 192.168.0.2 (because the source router's IP is 192.168.0.1) rebooted the router enabled WDS, found the network I want to repeat using the Survey feature, then filled in the WPA2 password. enabled WPA2 security on my own repeated network, using the same authentication type and password as the original rebooted the router.
My router complains that "WAN port is unplugged", and it doesn't get a WAN IP or incoming packets, which probably means it's expecting the internet signal to come from the WAN port rather than the wireless network I set up, right? How can I force the router to connect to the network? Also, should both routers be in the same subnet? I've tried with different subnets but nothing changes. The source router is a D-Link DIR-600.
That's y topology:
(TPLINK) /////////////// (Huawei)--->(internet)
...................wirless................cable
I want to configure my tplink modem on a repeater mode in order to repeat the signal from (Huawei) ...
I have a TP-Link wireless router which we have always been able to connect to the router with these laptops. My sister has come over to use our internet, which has worked before on her laptop, but now all of a sudden she can't connect to our router, it won't even allow her to type in the password it just says Windows can't connect to the network. I then tried one of our other laptop and after much battling it also refuses to connect to the router. eventually it did, but it still can't connect to the internet.I sat on the phone for about a hour with our network provider (I am from South Africa), and after trying many things, it still won't work. The guy said that there is nothing more to try.
[code]....
My company has a cisco router which i do not know the password the cisco router has internet connection and this connection allow only sx computers with static ip to connect to internet the range of those ips
(216.147.155.90 - 216.147.155.94)
the defualt gateway of my company router is
216.147.155.89
subnet mask is 255.255.255.248 so it is from class C,my and my friends brought a Tp-link wireless router and we are trying to connect it to internet but what i know is all of the ips (the range of the ips of my company router is used by others) how can I connect my router to my company router?
Connecting 2 wireless routers to get access to Internet all over my home.The plan is to connect ADSL Modem to TPLInk router making it a gateway. Then connecting LINKSYS to TPLINK wirelessly so that any computer or device connecting to Linksys router should get access to internet.
View 1 Replies View RelatedI have a TP Link router installed at home with a 128 Bit encryption key. I have my home laptop and a couple of I-touches that are able to connect wirelessly. I have a laptop from work that I have not been able to connect to the TP Link after inputting the encryption key. how to be able to connect without affecting my home units that are already working?
View 3 Replies View RelatedI have tplink router wr941nd. it was working fine but i when tried to use it again after some months i encountered this strange problem in which i am unable to connect to the router through its lan ports where has i can access the router through wlan i have tried reinstalling the firmware i have even installed dd wrt on it but i am unable to access it through the lan port.
View 3 Replies View RelatedI hav bsnl broadband connection in my home.... I connected a tplink wired for browsing...I also have a belkin wireless router..... I connected those routers.... And only wired communication is possible
View 7 Replies View RelatedHow to connect repeator to router
View 1 Replies View Relatedi have a linksys running dd-wrt and i had for a long time and it always worked but recently it just stopped connecting.i dont know how to fix this it would always say connection limited.
View 2 Replies View RelatedI have an ADSL2 connection at home served by a DLINK DSL-2760U modem+router . I also have a DIR-655 router.Is there any way I can use the 655 as a wireless repeater/access point/bridge to connect to the 2760U (reception issues between the floors)?
View 1 Replies View RelatedSo I am an owner of this router for the last 2 years: TL-WR542G - Welcome to TP-LINK . Today it died on me. All of its leds are lightning up, but it doesn't provide a wifi network, and won't give me an interface when i try to access it through 192.168.1.1 on my desktop . There seems to be nothing I can do about it , I tried pushing the reset button on it's back but it does nothing at all.
Do I have any other options to get some life back into it?
Connecting my TP Link 901ND repeater to my cisco WAG160N. Modem router is working well but repeater doesn't seem to be repeating the signal.
View 1 Replies View RelatedIn our office, we have 3 Cisco Aironet 1140s and they are configured as follows:
* Access Point A (192.168.0.50)
* Access Point B (192.168.0.51)
* Repeater (192.168.0.49)
* SSID : 101
how to have the Repeater connect to Access Point A only?
I am able to connect to TPlink router through my pc but unable to access internet.The router is unable to detect dynamic ip.
View 1 Replies View RelatedI looked at portforward.com and have forwarded port 3389 in the modem with the ip address set to the router's address. I've also forwarded 3389 in the router to the pc's address.
View 14 Replies View Relatedwhich will can extend the signal strength? changing antennas, put a wireless amplifier or buy ASUS 66U??change TPLink TL-WR1043ND to ASUS 66U ??? ASUS 66U is best to TPLink TL-WR1043ND and can extend the signal strength by up to twice the distance?
View 1 Replies View Relatedhave been trying to access 192.168.1.1 TPLINK Model TD-w8950ND configurations to ensure settings are correct and check password etc.
Have been unable to, I used to access it immediately, but for some reason, now I can;t after changing laptops. Not impressed. May have to reset laptop to factory settings as last resort. Don't know.
I'm trying to connect a non-wireless enabled pc to my virginmedia network by using a tp-link ta-wa500g router in client mode. The pc connects to the router via ethernet fine, and i can access the router admin page etc., but the router doesn't seem talk wirelessly to the virgin box. it finds it and everything, but i can't access the internet at all. i've tried removing the password, resetting everything, I've upgraded to the latest firmware, but have come to a bit of a dead end.
View 1 Replies View RelatedI've got a a tp-link TL-WR741ND, but I don't have a ADSL2+MODEM ROUTER, (ADLS MODEM). Instead I've got a orange usb modem, how can I install the device?
View 2 Replies View RelatedI got an Fritz Box from my new Provider to connect to the internet using Fiber To Home. the box is now im my living room and also acts as an WLAN Router. I would like to configure my WRT54GL which in located in my office from a router to a repeater to establish a WLAN bridgde.
View 3 Replies View RelatedI want to link a tp link router as access point to a d-link router.
View 2 Replies View RelatedI have router TP-link WR1043ND which cant handle more than 22 users?
View 4 Replies View RelatedI will be purchasing the AV200 powerline kit from Tp-link and want to know whether there will be any issues in connected them through either a power strip or double adapter?
View 8 Replies View RelatedI had this problem for 3 months now, at random times I get no connection and the LAN led 1 in my router (which I am connected to) just keep blinking very fast, ADSL and ACT leds are just on. I tried to troubleshoot the problem and it detected 2 problems: "default gateway is not available" and "local area connection doesn't have a valid IP". even when it says that it is fixed, seconds later the problem is still there (sometimes it gives me one problem only). I tried many solution on the forum including reseting the router, disabling the laptop's wireless modem (I'm on a laptop) and even trying ipconfig/release - ipconfig/renew. everything is up to date and I update my antivirus (and it has auto update enabled). here are my specs:
Broadband connection: DSL
Router Make/Model: TP-LINK TP-8840
Anti-virus: Avira free anti-virus
ipconfig data:
[Code].....
I have a WISP internet connection. i have a Acess point tplink tl-wa5110g . i set it to wisp client router... My final goal is to share my wisp internet wirelesly.
Now i want to ask what i have to do next. do i need wireless router and connect it with the Ethernet port of the acess point..
I've been trying to set up my TP-Link WR740N router but it always give the error "Failed to Verify router settings" on the last step of the set up screen. Broadband: Globe broadband (Wired)Modem: Siemen Gigaset SE260 I'm also confused on the 2nd Set up screen, it gives the option to select Dynamic IP Static IP PPoEI've tried using the Dynamic IP and PPoE but still getting the same error message
View 1 Replies View Relatedis there a way to restrict the upload and download of computers on a wireless network (or at least get the router to favor one computer over the others?)i have a tp-link TD-W8960N router and the computer i need the extra bandwidth on is connected to the router via cable
View 3 Replies View RelatedI have IBM X3200 M3 ( with onboard 2 LAN ) not connected into internet,tplink modem router + wireless ( ADSL MODEM )--->cisco E2500---->ibm x3200 m3( ubuntu )
View 8 Replies View RelatedI have a tplink acess point TL-wa5110G . I have WISP ( wireless internet service provider). I have configured the acess point on wisp client router mode and wan type to pppoe gave the username and pwd..Now i want to share internet wirelessly. now my question is that can i connect the aces point to wan port of the wirless router to share internet wirlessly? Because i have seen the instruction figure in tplink access router where they have shown that u can connect it with with unmanage able switch to share it to wired lan.i want to ask can wirless works to share internet if i use wireless router to access point.
View 1 Replies View RelatedI bought a tp-link WA701ND and a netgear WGR614. i wish to pick up signal using 701 and then let 614 repeat it. no more tech support coz im already broke.
View 1 Replies View Relatedis it possible to connect Cisco Ap-1242AG with non-cisco wireless router to work as repeater?
View 1 Replies View Related
