I have a TP Link router installed at home with a 128 Bit encryption key. I have my home laptop and a couple of I-touches that are able to connect wirelessly. I have a laptop from work that I have not been able to connect to the TP Link after inputting the encryption key. how to be able to connect without affecting my home units that are already working?
View 3 RepliesI have a TP-Link wireless router which we have always been able to connect to the router with these laptops. My sister has come over to use our internet, which has worked before on her laptop, but now all of a sudden she can't connect to our router, it won't even allow her to type in the password it just says Windows can't connect to the network. I then tried one of our other laptop and after much battling it also refuses to connect to the router. eventually it did, but it still can't connect to the internet.I sat on the phone for about a hour with our network provider (I am from South Africa), and after trying many things, it still won't work. The guy said that there is nothing more to try.
[code]....
I have tplink router wr941nd. it was working fine but i when tried to use it again after some months i encountered this strange problem in which i am unable to connect to the router through its lan ports where has i can access the router through wlan i have tried reinstalling the firmware i have even installed dd wrt on it but i am unable to access it through the lan port.
View 3 Replies View RelatedI hav bsnl broadband connection in my home.... I connected a tplink wired for browsing...I also have a belkin wireless router..... I connected those routers.... And only wired communication is possible
View 7 Replies View RelatedI want to use TP-LINK TL-WA801ND as a repeater, at the same time I need to connect one PC to this repeater by UTP cable (the router has one RJ-45 port) will I be able to successfully connect this PC to internet using this router as a repeater ?
View 6 Replies View RelatedMy company has a cisco router which i do not know the password the cisco router has internet connection and this connection allow only sx computers with static ip to connect to internet the range of those ips
(216.147.155.90 - 216.147.155.94)
the defualt gateway of my company router is
216.147.155.89
subnet mask is 255.255.255.248 so it is from class C,my and my friends brought a Tp-link wireless router and we are trying to connect it to internet but what i know is all of the ips (the range of the ips of my company router is used by others) how can I connect my router to my company router?
Connecting 2 wireless routers to get access to Internet all over my home.The plan is to connect ADSL Modem to TPLInk router making it a gateway. Then connecting LINKSYS to TPLINK wirelessly so that any computer or device connecting to Linksys router should get access to internet.
View 1 Replies View RelatedI'm currently reconfiguring an ASA5510 installation to a HA setup with a second 5510. The old 5510 has an "AnyConnect for Mobile" license which isn't being used. So we upgrade that one to a SecPlus License to enable failover posibilities and we bought a new 5510 also with a SecPlus license. When I'm trying to enable failover I get the message that my mate hasn't got the "AnyConnect for Mobile" license. I know for failover both devices must be exactly the same (at first i thougth that the AnyConnect license would be lost when upgrading to SecPlus). So now I'm wondering and searching for solutions to remove the AnyConnect license (because we don't use it).
View 7 Replies View RelatedMy desktop internet was working fine earlier today. I bought a new hard drive and installed it without any trouble. I plugged my machine back in and received a "no internet connection" message. I have tried (what I think is) everything: unplugged my modem and router and plugged it back in as if it was the first time with the 60 second pauses and whatnot; tested the connection with my cable modem service provider; unplugged and checked cable connections; did ipconfig/flushdns ... I'm really not sure where to go from here.My wireless configuration works fine, as I am able to connect both wirelessly and wired to the router on my laptop. I cannot connect via the modem or router to my desktop PC.Windows 7 running 64-bit, Motorola Surfboard modem (brand new), Medialink router (also brand new), custom built machine.
View 1 Replies View RelatedI recently installed a NetGear router to my PC in order to do online gaming. Now my laptop does not connect to the internet. I have spent over 9 hours on the phone with Centurylink (the internet provider); Netgear (the router) and HP (the laptop). Each one says its not their problem. The laptop can find our connection, it says "Connected". However it then says "Internet access denied".
View 5 Replies View RelatedI had a simple PPTP VPN server running behind my old DLink router. When I installed the E3000 the VPN clients could no longer connect. The port forwarding for PPTP is turned on and VPN passthrough is enabled. The PPTP server reported GRE47 checksum failed. The linksys chat tech was not beneficial. How to get a PPTP route to work?
View 5 Replies View RelatedSo I am an owner of this router for the last 2 years: TL-WR542G - Welcome to TP-LINK . Today it died on me. All of its leds are lightning up, but it doesn't provide a wifi network, and won't give me an interface when i try to access it through 192.168.1.1 on my desktop . There seems to be nothing I can do about it , I tried pushing the reset button on it's back but it does nothing at all.
Do I have any other options to get some life back into it?
I am able to connect to TPlink router through my pc but unable to access internet.The router is unable to detect dynamic ip.
View 1 Replies View RelatedI looked at portforward.com and have forwarded port 3389 in the modem with the ip address set to the router's address. I've also forwarded 3389 in the router to the pc's address.
View 14 Replies View RelatedI've got a a tp-link TL-WR741ND, but I don't have a ADSL2+MODEM ROUTER, (ADLS MODEM). Instead I've got a orange usb modem, how can I install the device?
View 2 Replies View RelatedI want to link a tp link router as access point to a d-link router.
View 2 Replies View RelatedI have router TP-link WR1043ND which cant handle more than 22 users?
View 4 Replies View RelatedI had this problem for 3 months now, at random times I get no connection and the LAN led 1 in my router (which I am connected to) just keep blinking very fast, ADSL and ACT leds are just on. I tried to troubleshoot the problem and it detected 2 problems: "default gateway is not available" and "local area connection doesn't have a valid IP". even when it says that it is fixed, seconds later the problem is still there (sometimes it gives me one problem only). I tried many solution on the forum including reseting the router, disabling the laptop's wireless modem (I'm on a laptop) and even trying ipconfig/release - ipconfig/renew. everything is up to date and I update my antivirus (and it has auto update enabled). here are my specs:
Broadband connection: DSL
Router Make/Model: TP-LINK TP-8840
Anti-virus: Avira free anti-virus
ipconfig data:
[Code].....
I have a WISP internet connection. i have a Acess point tplink tl-wa5110g . i set it to wisp client router... My final goal is to share my wisp internet wirelesly.
Now i want to ask what i have to do next. do i need wireless router and connect it with the Ethernet port of the acess point..
I've been trying to set up my TP-Link WR740N router but it always give the error "Failed to Verify router settings" on the last step of the set up screen. Broadband: Globe broadband (Wired)Modem: Siemen Gigaset SE260 I'm also confused on the 2nd Set up screen, it gives the option to select Dynamic IP Static IP PPoEI've tried using the Dynamic IP and PPoE but still getting the same error message
View 1 Replies View Relatedis there a way to restrict the upload and download of computers on a wireless network (or at least get the router to favor one computer over the others?)i have a tp-link TD-W8960N router and the computer i need the extra bandwidth on is connected to the router via cable
View 3 Replies View RelatedI have IBM X3200 M3 ( with onboard 2 LAN ) not connected into internet,tplink modem router + wireless ( ADSL MODEM )--->cisco E2500---->ibm x3200 m3( ubuntu )
View 8 Replies View RelatedI have a tplink acess point TL-wa5110G . I have WISP ( wireless internet service provider). I have configured the acess point on wisp client router mode and wan type to pppoe gave the username and pwd..Now i want to share internet wirelessly. now my question is that can i connect the aces point to wan port of the wirless router to share internet wirlessly? Because i have seen the instruction figure in tplink access router where they have shown that u can connect it with with unmanage able switch to share it to wired lan.i want to ask can wirless works to share internet if i use wireless router to access point.
View 1 Replies View RelatedI bought a tp-link WA701ND and a netgear WGR614. i wish to pick up signal using 701 and then let 614 repeat it. no more tech support coz im already broke.
View 1 Replies View RelatedI just installed ubuntu 10.10 and I'm unable to connect to the internet. I checked for device recognition and the output is DISABLED which apparently means that my network device may be turned off. How can I turn it on. Windows is no longer installed. By the way I'm an ubuntu newbie. Hence, I wiped my hard drive during installation.
View 1 Replies View RelatedI just re-installed Windows XP Professional on my Dell XPS Gen 4. Everything works fine on it but the internet. I can open IE, but it just says "This page cannot be displayed" and on and on.Since I re-installed it I believe their are not many drivers on it, I don't really know, and I think that might be it but I am not sure. And I am not sure which drivers I need if it is missing drivers.
View 7 Replies View RelatedI had some issues so installed Avast, ran a scan and everything went wrong from there, suddenly dropped internet, tried system restores which failed and automatically deleted the restore points. One of the main fixes (that i havnt managed to get to work) is ipconfig /release/renew, both come up with "an error occurred while releasing interface loopback pseudo-interface : the system cannot find the file specified file" and "an error occurred while renewing interface local area connection : an address has not yet been associated with the network endpoint"?
View 3 Replies View RelatedI installed windows XP and now I connect a cable from the router to the pc and I can't connect to the network.
View 1 Replies View RelatedI have a Dell Inspiron 1545 and I recently installed a new hard drive. Everything is working fine EXCEPT the WIFI. In the Device Manager the Network Controller has a yellow triangle with a exclamation point in it. I have tried to search to find the driver but it says it is unable to locate it. When I download the Intel driver from the Dell website, it downloads but nothing ever opens.
View 5 Replies View Relatedwhat if I don't know the security key how do I connect
View 2 Replies View RelatedMy Iphone 4s will no longer connect to my WRT54G Linksys router. I know it's a security issue because if I disable security, then it connects. I'm using WPA-Personal, AES, Mixed mode.I've already tried resetting the network settinegs on the iphone a couple of times.
View 3 Replies View RelatedI have an older D-Link DGL-4300 wireless router, I've purchased a wireless home security system and can't seem to get the 2 connected. I've tried resetting the router & modem (powering down & waiting from 1-5 minutes), and my router just won't read the port that I've plugged the security system ethernet cable into.I think the problem is my firewall but I don't know how to set it to allow the router to read the port that I've plugged into, or it could be the firewall that my anti-wirus has or possibly both.My equipment is Comcast cable, router (as noted above) and a D-Link DCM-202 modem, Windows XP 3, and Norton anti-virus. Now I also have my phone through Comcast and it has it's own modem.
View 7 Replies View RelatedI've had this E4200v2 for a while now, and it's been giving me a headache because even at default wireless setting with the passphrase, it literally won't ever connect from a linksys wireless adapter using the mixed WPA2 Personal or the 'EasyConnect' button feature or the PIN, with both side's fireware updated to the latest. There is no issue connecting to the router as long as the security is off. I've tried other form of encryption to no luck.
View 1 Replies View Related