D-Link DIR-655 :: All Lights Blink On And Off?

Apr 12, 2012

All the light on the router blink on and off. Then the router resets and loops all over again?

View 9 Replies


ADVERTISEMENT

D-Link DIR-615 :: All Lights Blinking Including Power?

Jul 11, 2012

I came home after a few days vacation to find all the lights blinking on my router.  I have tried unplugging and rebooting.  Same result.  I then bypassed the router and have internet on my main computer so I know it is a router issue.   I use the router for my laptop and cell phone.  Do I need to figure out how to do a master reset or is the router toast?

View 1 Replies View Related

D-Link DIR-615 :: Software Failure - Only 5 LED Lights Responding

Jan 29, 2012

I bought a new DIR-615 and tried to install dd-wrt on it. During the installation all of a sudden the router stopped blinking the led lights and stopped responding to anything. It's current status is that I can only see globe LED and the other 4 LAN LEDs in continuous green and NOT blinking. The power LED and wireless LED are not even displaying. I tried all kinds of reset like soft,hard and crash but no response. It's not responding to anything except those 5 LED lights.

View 1 Replies View Related

D-Link DCS-942L :: IR Lights Stay On In Manual Mode

Mar 29, 2013

I was trying to set this up pointed out a back window, but obviously ran into the IR lights reflecting back on the glass.  I don't have an external IR light yet, but just tried the manual IR mode and the IR lights stay on.

View 9 Replies View Related

Wireless Button On Laptop Won't Blink?

Oct 6, 2012

i have a laptop that has a wireless button on the front and every time i try to click it to turn it on, it wont even blink. On the wireless networks, all it says is hat no connections are available. get my wireless network button on my laptop to turn on somehow?

View 7 Replies View Related

TP-Link 150Mbps Wireless :: TL-wr740N All Lights Flashing After Interval Of 2 Seconds

Jan 21, 2013

Region : Others
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :

My router is not working and only all lights are flashing everytime after interval of 2 seconds.

View 1 Replies View Related

D-Link DIR-655 :: Stops Responding To Internet But Modem / Router Lights Fine

Jul 29, 2011

As of two days ago my DIR-655 seems to have stopped loading webpages every 10-30minutes for periods of up to 5-15 minutes, as in they the reloading icon will constantly be circling and the webpage remains blank, no error or anything until it says failed to load on my web browser (tried multiple browsers such as Safari, Chrome, IE and Firefox). This problem occurs on every computer on my network, laptops (both Mac and PC) and desktops. When this problem occurs all lights on modem and router seem to be normal no signs of anything going down but I originally thought that this affected wired and wireless but I seem to have narrowed it to culprit being the wireless. When connected to the PC I can browse for an indefinite amount of time without the webpages failing to respond, however when I connected to WiFi through Airport on a Macbook Air my webpages start to begin failing to load around 5-10 minutes of browsing which affects all computers connected to the network (essentially all computers failing to respond to the internet during this outage).

Interestingly when this problem occurs, if I am connected to Skype or Aim it will stay connected and I can still chat with people but I will not be able to sign onto AIM if the problem occurs before I sign on and I try to sign on during the outage. If I am streaming a video from justin.tv or ustream it still continues to stream during this "outage".I have the revB of the DIR-655 and have tried resetting the modem, turning off the firewall, upgrading firmware to 2.03NA from 2.01NA and setting the MTU to 1400 (default 1500) with nothing working. I am using Time Warner Wideband ISP and have connected the modem directly to my PC and for the 30minutes or so that I tested the web browsing it seemed fine and did not have any errors.

View 14 Replies View Related

Cisco Switches :: SF 102-24 MGBSX1 Doesn't Show Any Link Lights Or Traffic

Jul 28, 2011

I just purchased a Cisco SF 102-24 unmanaged 100 series swith with a MGBSX1 mini-Gbic converter.  My goal is to connect this to a building that is connected with a Black Box LH1706A-ST media converter that has 100mb ST fiber connections.  In my testing the Black Box shows both a Fiber link and RJ45 port link at 100mb, but the MGBSX1 does not show any link lights or traffic.  So a computer connected to the Cisco switch is not able to communicate over the fiber connection. 
 
Can the MGBSX1 be connected to a media converter that only has 10/100 ST fiber connectors? 

View 2 Replies View Related

Linksys Cable / DSL :: Fiddle X3000 To Blink Internet Light To Show Dsl Activity?

Jan 6, 2012

Any way to fiddle the X3000 to blink the Internet light to show dsl activity?

View 7 Replies View Related

Linksys Wireless Router :: E4200 Disconnects Randomly And Cisco Light Blink

Jan 19, 2012

Randomly, the cisco light blinks and i lose my internet connection. I cant even ping the router. After 30 secs it works again. But this is annoying, i got disconnected 4 times today, unnaceptable. Im connected with wired ethernet. My firmware is 1.0.03.

View 9 Replies View Related

Cisco Switching/Routing :: 3750 Method Of Forcing Non Connected Switch Port LED To Blink

Jan 9, 2012

Any method of forcing a non connected switch port LED to blink for a certain number of times regardless if there is anything connected.The purpose of this is we have remote 3750 switch stacks and quite often have to tell non technical staff to patch to a certain port. It would be much easier if we could say "Connect it to the empty port which just started blinking orange" as the port numbers are difficult for them to see in these locations.A similar feature is available in the ethtool package for linux which makes it really easy for identifying ports on servers. It would be great if a similar feature is available on Cisco switches.

View 2 Replies View Related

Dsl And Internet Lights Off On Modem?

Jun 5, 2011

I've been recently having problems with my modem, the DSL light shuts off even if my cable is correctly connected to my phone socket. This mostly happens when I'm playing games.

View 3 Replies View Related

Getting Red And Orange Lights On LAN Socket?

Mar 29, 2012

I m getting red & orange lights on lan socket

View 1 Replies View Related

What Do The Lights On An Ethernet Port Mean

Feb 28, 2011

I am trying to figure out what the lights on my Dell ethernet adaptor port mean.

View 1 Replies View Related

DSL Internet And LAN Lights Restarts?

May 16, 2012

DSL in my modem nearly takes 30 minutes to start operating once i start modem two lights in power and the Lan are glowing but Dsl is not for more than 30 minutes then after that it operates but once u restart the system or switch the modem off and On it again takes 30 minustes to start often it restarts itself when operating the Dsl wat would b the problem any wire or cable or modem itself or splitter

View 1 Replies View Related

Ethernet Cable Not Detected / LED Lights Are On

Jul 25, 2011

I got myself a weird problem. A few hours ago I installed Blueline's Driverscanner, but after the installation I lost my internet connection. I've checked the networkconnections and it's not in the list anymore.The really weird part is that there is a LED light coming from the cable, indicating it has a connection, but it is not making any.

View 23 Replies View Related

Router Lights With No Physical Connection

Nov 7, 2012

Today I woke up and wanted to connect to the internet via my laptop. The current network I have is the DSL modem connected to a WR841ND TP-LINK router, and then connected via LAN port to my desktop PC, and via Wi-Fi to a Laptop.However, my connection was unsuccesful. I power cycled both the modem and the router, awaited for a stable connection, and tried again with no result.That's when I noticed the lights on my router seemed strange. While the router's LAN port 1 to the computer was connected and lit, the LAN port 4 was also lit, but it wasn't connected to anything. Then I noticed my wan port showed the same behaviour, since it was already unplugged, but its light was still on.

That's when I decided to do a factory defaults reset, a hard reset, and reuploaded the firmware to the router. No change at all.I decided to connect my DSL modem to the computer directly, and internet works like a charm, so everything points to the router as the source of the problem.Now, I wanted to know. What would be the procedures I should follow to test or repair the router before declaring it "deceased"? Could this be more of a firmware problem? A hardware one?

View 1 Replies View Related

Built-in Lan Controller Does Not Glowing Lights

Jun 1, 2012

I have configured a new PC but it does not glowing indicator lights on inserting cable. I tried 10 times using different cables. Installed a fress windows 7 but no lan driver can be found. Later I tried to install Realtek lan driver it gives the error " The realtek network controller was not found. If deep sleep mode is enable please plug in cable".

View 2 Replies View Related

New Homeplug / Powerline Says It Is Not Detected / When All Lights Are On

Jan 8, 2012

I have recently bought a homeplug to connect to the internet since my broadband is downstairs from my pc. I have plugged in the two homeplugs and connected them to my pc and broadband with a ethernet cable. When i turn on my pc the ethernet light turns on (same for downstairs) but after installing the software and trying to search for my wifi a message pops up saying "The homeplug adapter has NOT BEEN DETECTED. Please check your computer cables". So i did so, i chnaged the sockect moved the ethernet cable to a diffrent slot and still it says it has not been detected. This is very annoying and i really want to get it fixed.

View 17 Replies View Related

Cisco :: WAP4410N AP - PoE Lights Up And Keeps Rebooting

Dec 19, 2011

Would like to enquire regarding 2 x WAP4410N access points that we have installed at our site.  These devices work fine with the power brick but when connnected the SG300-28P ports POE lights up, and seems to keep rebooting for some strange reason

View 8 Replies View Related

Wireless :: Lights On Wifi But No Machine Detects It

Jan 17, 2011

After having my modem and router switched off for about 3 hours (removing trojan on one machine) neither of my laptops or Nokia N8 can connect. The LAN is fine, all lights are showing ok on the router, inc WLAN, but no machines can detect the wireless signal?

View 6 Replies View Related

Wireless Doesn't Work But Lights Up On The Router

Jan 15, 2012

like today randomly my internet went down. And then everything changed back to its original like my SSID from Netcom it changed back to wireless and everything was default and also the PPP was off so i wasn't able to connect to the internet. So i went to my router setup page on the internet or whatever and turned it back on. So now like the internet on my computer which has a cable to the router works but the wireless internet doesn't work for my laptop nor ipod. I can see the connection on the laptop and ipod but when i try to connect it keeps saying that it is unable to connect.

View 7 Replies View Related

DCM425 Don't Turn Off Also Has 4 Solid Green Lights?

Mar 7, 2013

dcm425 dont turn off also has 4 solid green lights...it happen after a power outage my router works fine but my dmc425 cable modem just has the 4 green solid lights when it's plugged in when i push the power button nothing happens at all

View 3 Replies View Related

Router Lights Fine But Internet Does Not Connect

Apr 9, 2012

All the light indicator of the router are working as they should,however there will be no internet connection.This happens about once a day(rest of the day the internet works fine),I then have to switch off the router,wait for a good amount of time and then switch it back on and then internet will work fine.I use the router for many devices like my windows 7 laptop,an ipad,iphones.

View 1 Replies View Related

IMac (Aluminum) / All Lights Are Green But Still No Connection

Aug 9, 2011

Here's the setup I have:

iMac (Aluminum)
Apple Time Capsule 1TB
AT&T DSL

When connected, all lights on modem are green, so is the light on the Time Capsule. When I go to a website, page cannot be displayed. When I insert the ethernet cable directly into the back of the iMac straight from the DSL, the internet works just fine.With all lights green but no internet connection, what am I missing?

View 3 Replies View Related

Belkin Routers :: F5D720-4 Lights Off - Won't Reset

Dec 28, 2012

disconnected for 30 seconds and reattached power-still no lights or service. Reset button still no lights or service?

View 1 Replies View Related

Cisco WAN :: 1841 / CF And AIM Lights Are Glowing Continuously?

Aug 18, 2012

I have got a cisco 1841 router. i can't see anything when connected to hyper terminal application. I can't ping to any interface of the router. The CF and AIM lights are glowing continuously and every light also glows near FA interface when cable connected on the interfaces.

View 1 Replies View Related

Netgear FS750T - All Lights Doesn't Appear To Be Working

Feb 1, 2013

I picked up a second hand NETGEAR FS750T switch today for very little as the previous owner said it had stopped working.

After powering it up, there is a small noise for about three seconds. All the lights above the 10/100 ports are solid green and I can't access the web interface when connecting it up to my computer.

What could the problem be? I've heard others with different switch models reporting that all the lights are flashing and replacing the capacitors fixes them.

I've tried the reset and factory reset buttons. The reset just puts all the lights off for the duration of holding it and the factory reset appears to do nothing.

edit: when I turn it on, all the lights and the sound starts immediately. After two seconds, the lights go out. After three seconds, the sound stops and the lights return.

View 1 Replies View Related

E4200 - LED Lights On Router Keep Blinking Orange?

May 1, 2013

I have a Cisco E4200 router connected behind my Comcast cable modem.

The small LED lights located at each network cable plug-in on my router are continually blinking orange all at the same time over and over.

I also notice on all my computers that are wired to this router the small LED lights near the network card plug-in are also blinking orange.

what these orange lights mean and if I have a problem?

My internet service seems to work OK but I'm not sure what is causing all these orange LED's to blink and is there something wrong that imay be slowing my system down.

I have upgraded my Cisco router to the latest firmware and also power reset my cable modem and router several times with no change in the problem.

View 4 Replies View Related

Cabling / Cards :: Green Lights Flashing In Sync?

Jul 10, 2011

There was a problem with one of our servers. We were unable to connect to it remotely. We restarted the server. Still we were unable to communicate with it. Static IP is provided.

In the connections settings, it showed the send and receive as 0. I noticed the network card lights. Both were flashing green in sync, like twice in one second. I removed the cable and funny thing was, it was still blinking non stop in the same way. I plugged the cable back in and took back out, the same result. After a second restart of the server, it started working normally and i was able to communicate with the server.

View 1 Replies View Related

Netgear WNR2000 / Router Is Not Working - Only Three Of Seven Lights Are Active?

May 23, 2012

Today a bought a brand new Netgear WNR2000 router.Upon setup the wifi was working correctly. All of the lights where active and it seemed everything was in order.Because the power cord was in the way I moved it and plugged it into a different powerpoint. From then onwards my router has not been working. Only three of seven lights are active (green).

I have tried unplugging and replugging all network cords. I have also turned it on and back off, reset the router and run the initial installation program thrice.What should I do now? Nothing so far has effected it. The computer I am installing it on is running Windows XP and the laptop I intend to use the wifi on is Windows 7.

View 1 Replies View Related

Asus P5QL-VM Lights On Ethernet Port Not Working

Oct 17, 2011

I have the Asus P5QL-VM DO motherboard.On the Ethernet port the lights are not working and I can not get an internet connection.

View 1 Replies View Related

Linksys Wireless Router :: WRT54GS V7.2 LAN Lights On With No Cables

Jul 11, 2011

So the power light on my WRT54GS router is off but my LAN lights 1-4 and the WLAN light stay on when power is attached but no cables are in the ports.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved