D-Link DIR-655 :: Cannot Connect To X-box Live
Dec 26, 2011
I cannot connect to X-box live. The test connects to my router, to the internet, but fails on connecting to Xbox live. I tried changing from n to g. Set up port forwarding with dedicated IP address on xbox. Still same issue every-time. Even see the x-box listed on the router status page indicating that the static IP I assigned is hitting the router. Using WPA- personal for security and the X-box game adaptor with a D-Link- 655 router.
View 9 Replies
ADVERTISEMENT
Feb 11, 2012
I've got an Open NAT but there's still some people i can't connect to (Xbox Live), i know theres a UPNP but it doesn't seem like it's doing anything.
View 1 Replies
View Related
Jul 21, 2011
So our last router (Linksys) quit on us the other day so we got this one. We plug it in and it works most of the time, but the connection drops out periodically. Also, for some reason, I am now unable to connect to Xbox Live using my laptop as a router (plugging the ethernet cable from my xbox to my laptop). Also, when I plag it in, the internet stops working on my laptop and I have to restart it to get it to work again.
View 1 Replies
View Related
Aug 24, 2011
I recently purchased a 825 and a WD Mybook Live. I have been going back and forth on the WD board trying to resolve a remote access issue with the mybook and I am being told to do some settings in the router and I am not sure I have dine them correctly> It has not resolved the issue but I would like to make sure I am correct before I claim its not a good fix. The mybook is connected into a network port on the router which is connected to a High Speed modem and then out to the internet. Initially I was told to enable UPnP on the 825, which was already enabled. Then this is what I was told to do by a WD tech. You could try assigning a static IP to the My Book Live, then making sure ports 80 and 443 are assigned to that IP on your router. It is possible that something else is taking one of these ports. We use uPnP to try to open up these ports, and if it fails, we resort to relay mode. In the future, we will allow you to set these ports within the My Book Live to other than 80 and 443.
View 7 Replies
View Related
Apr 13, 2013
i've lost the ability to view live streaming video (adobe flash, i think) on several websites. it happened gradually over several weeks and now videos will not load. the dir-615 has functioned flawlessly over several years but it might be showing its age now. connecting directly to my com cast broadband modem fixes the problem. can i tweak the router settings or do i need to replace it?
my setup: dir-615, H/W Ver. E1, F/W Ver. 5.00NA, two wired connections to X Box's and one to Win 7 PC. wireless connections to several Win 7 laptops and other tablets/phones. com cast high speed broadband with their Norton security suite.
if replace.....i need a recommendation. the best bang for a buck while staying within a tight budget.
View 3 Replies
View Related
Aug 9, 2011
I cant receive my email through windows live mail since i goit my router (i just got this problem with my hotmail account tho gmail work properly)
View 11 Replies
View Related
May 16, 2013
i still play with the motion detection feature of the 942L. Is there a way to see where on the live-picture the motion is detected?I do not see any motion on the srceen but the cam still detects motion and records every 60 seconds. Also i played with the sensitivity but without success. So i had the idea to ask the cam where on the screen the motion was detected...
View 1 Replies
View Related
Dec 21, 2012
I have 3 DCS-932L connected to DviewCAM 3.3 Device pack 1.4.2. When I open the DviewCAM main console I have picture. When I activate network service (live streaming) options under port: 8080 and webserver port: 801, it allows a visual of the DviewCAM GUI but no live streaming over the internet. [code]
View 5 Replies
View Related
May 2, 2012
I just bought a new television so thought I would finally be able to get to play xbox live in a television away from the router! But of course like always there is is problems....
I'll start off by saying I understand about bridging your pc's wireless connection to the router and the wired connection from the xbox to the pc. I did the same thing last year with my old laptop and it worked fine.
However the problem lies in that my computer isn't recognising the xbox as a network device atal! They are connected using an ethernet cable (and the orange light comes on at port when xbox is turned on) but the only thing showing up in networked connections folder on the pc is the actual internet!
I had read that sometimes an ordinary ethernet cable isn't enough and it must be a cross over cable used to connect the pc and the xbox, so went into the shop today and purchased an adaptor that changes the cable to a cross over... but still nothing is showing up.
My computer is fairly top of the range, windows 7 and uses a netgear usb network card.
View 12 Replies
View Related
Feb 22, 2012
I have just installed two DCS-942L cameras and uses MyDlink. The live video is OK from MyDlink, but when I log on to the cameras from "Advanced Settings" the live video is just a black screen, no matter what video profile I select. Like wise I can't select motion detect area, because there is just a black screen.I have tried on tree different computers. What can be wrong?
View 7 Replies
View Related
Oct 7, 2011
i have this problem when using Remote Live Viewer the Web Remote Client of DviewCam 3.2: i can only see one camera at a time, even more i have to stop playing the current one if i want to change the camera. the viewer shows me the grid for playing many cameras but i don't know if they can be played simultaneously. I can select any camera and will play so i don't think it's an access problem.
View 2 Replies
View Related
Jan 27, 2013
How to develop an iPhone based application which can show live streaming from DCS-930L IP camera? how to support various other IP cameras as well in the application?
View 8 Replies
View Related
Sep 14, 2011
My duaghter has been given an allfine netbook and I would like to connect it via wireless to my Orange livebox. I can see the livebox but cannot get a connection to browse.
View 1 Replies
View Related
Feb 2, 2012
Can't connect me windows live messenger
View 1 Replies
View Related
Jan 17, 2011
I have internet connections and i use Firefox now instead of Internet Explorer but whenever i want to sign in the Windows Live Messenger or Yahoo, it won't let me because it says the network is not connected. I used to be able to, even when i have Firefox. I check to see if the network is connected and it always is.
View 7 Replies
View Related
May 24, 2011
i have and original xbox 360 hardwired to my linkisis router. i can use xbox live silver with all the game marketplaces and all that but when i have gold and try to go on multiplayer it says xbox liv servers are unavailible. my internet provider is xplornet and i have avg anti virus on my laptop
View 1 Replies
View Related
Sep 9, 2012
More often than not, when my son wants to play on Xbox Live, the Xbox won't connect to Xbox Live. It will connect to the network and the internet but not Xbox Live. After running the connection test, the suggestion is to reboot the modem and router. It works after rebooting those two devices. Why does this happen so often?
View 8 Replies
View Related
Sep 23, 2012
It worked fine for my PC's and Xbox, but I had disconnected my router for a while, plugged it back in and my xbox simply cannot receive any connection. I should also note that I use an ethernet cord (I don't use it wirelessly) and it has nothing to do with the ethernet cord (I've tried several). Using network magic, it does confirm that a connection to the game console and the router.I've looked through the forums and all of what I found, are NAT problems/issues or fixing a wireless issue, but not an issue when using an ehternet cord.
View 1 Replies
View Related
Oct 4, 2011
So, I've had my Linksys E2000 Router for awhile now (not a year old though), and I just discovered a problem with it.Just the other night, not even 8 hours ago, I was playing my 360, everything was fine. I then decided to go to bed, cause it was getting late. Here I am now, I boot my 360 up, and notice that my 360 couldn't connect to Live. At first I thought maybe the cable got unplugged somehow; nope. So I troubleshooted to fiind out that Ethernet Port one no longer works on my router, but switching the cable to port two, my 360 is able to go online.
Does this mean my beloved router, that I paid my hard earned cash for, has decided to start crapping out on me, or is there a fix for this? I take really good care of all my electronics, and my router sits in a spot by itself on my desk with plenty of air space. I have had no issues with this router in the past, until' now. I've always trusted Cisco, and Linksys products, and this really dissapoints me that my router might just be kicking the bucket, at not even a year old. What's the deal Cisco?
View 8 Replies
View Related
Oct 21, 2011
I upgraded 3 days ago from a (WRT160N ver. 1) to a (E3200) After setting it up and syncing all the devices including the XBOX 360. After signing into Live I noticed that every time I power off and power on the console it's IP address would change causing the NAT to become moderate so I went over to the Xbox360 open the Network settings and Manually set the IP address Mac address, Gateway address. Then I opened the routers settings page and Port Forwarded the correct ranges also copied the IP address I manually entered earlier on the Xbox 360. On the router side I saved the changes restarted the console and my NAT was open, but here's the Issue now when I go to sign into Live I get a pop up saying I can't connect to Live to "Test the Connection". After I "Test the Connection" then and only then I can sign into Live.
View 9 Replies
View Related
Nov 29, 2007
I have a xbox 360 that I want to connect to xbox live with, using my home network. Every time I try to connect to xbox live the only part that fails is the connecting to xbox live part. This is how my network is set up. I have Cox Cable as my ISP, a Linksys WCG200 gateway(v2), and WRT54GS(v7). The cable wire is connected to the WCG200 gateway, then an Ethernet cable connects the gateway to the WRT54GS router, and finally an Ethernet cable connects the router to my xbox 360. I have contacted Cox, Linksys, and Microsoft about the situation and they all say the problem is the version of the router. Someone told me that I may just need to change the firmware, but I don't know how to do that.
View 9 Replies
View Related
Apr 12, 2013
I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies
View Related
Nov 15, 2012
Ive been trying to work this out on XBL forum for a while. all my settings seem to be correct ( UPnP, NAT type: open, no port forwarding or triggering, IP settings on Xbox's are auto).
The two Xbox can play online separately, when either one of them attempts to join the others party it disconnects from Xbox live.
According to the microsoft website, Xbox live only supports the Hardware version 1A and Firmware: 1.00NA.
My router has B1 and 2.00NA. is there a way to downgrade?
View 4 Replies
View Related
Mar 10, 2011
My xbox has got a full signal but wont connect to xbox live.
View 1 Replies
View Related
Jan 15, 2012
I have tried everything, port forwarding, switching wires, and resetting my router. NOTHING WORKS! I get disconnected every 15 minutes and i can even send messages to people.
View 1 Replies
View Related
Sep 29, 2011
I have a custom built media server with 2 dual digital tv tuners in.I can record TV and stream it to computers on the network fine, but is there anyway I can stream a Live TV stream to multiple PC's? I have heard of it being done, but can't remember where I read it.
View 1 Replies
View Related
Sep 13, 2012
I got threatened by a few people for being good and my xbox live has been disconnecting a lot today and i've been unable to finish a game. then I looked into my router settings and saw this... 79 TCP- or UDP-based Port Scan So that means 79 times it did that, which is weird when you look at the rest of the router numbers.
View 1 Replies
View Related
Jul 12, 2011
can't run norton live update, it say can't connect to the internet, but my connection is good. I tryed everything I could but still not working.
View 1 Replies
View Related
Jan 9, 2012
how do i find my WEP/WPA/Security Key for my wireless router to set up XBOX Live?
View 1 Replies
View Related
Feb 1, 2013
blocking the ports and all that but that only works if the person is not connected and then attempts to connect.Looking for a way to disconnect while connected and blocking ports does not do that.I had a way where if I paired blocking ports with blocking certain websites xbox live uses it would kick xbox live off right away. Unfortunately I lost those sites.
View 7 Replies
View Related
Oct 2, 2012
I'm having an issue with my wireless connection.I was connected fine to my wireless internet on my desktop perfectly fine. I then attempted to connect to Xbox live at this time and that also worked fine.The connection began to get a little flaky (kept losing connection) so I reset my modem while they were both still connected.When the modem came back neither was able to connect.My other laptop, iPhone, and iPad also can no longer connect to the wireless.Windows troubleshooting tells me my DNS server is no longer responding. I'm assuming the desktop connection and Xbox connection are trying to connect to the same thing due to my reset, but I can't figure out how to fix it.
View 3 Replies
View Related
Feb 1, 2012
how do i find my web key on my computer to set up xbox360 live?
View 3 Replies
View Related
May 5, 2011
I just got an Xbox and live and tried to connect to my Bell Turbo Hub but it came up with a not enough MTU error, I called Bell and they said It wouldnt work with live. If there is some way to make it work?
View 3 Replies
View Related
