D-Link DWA-140 Fails To Connect

Sep 26, 2012

I have recently had issues with my dlink which has been happily working for around 2 years. Now suddenly it will not connect to the Internet at all, I can find networks but it simply refuses to connect at all. I'm having to post this on my iPod so I can't even download any alternate drivers etc

View 2 Replies


ADVERTISEMENT

D-Link DIR-655 :: Wireless Router Fails To Connect Periodically

Nov 27, 2012

I have to reset my wireless router multiple times per day. Seems to just be our two laptops that fail to connect periodically, not other devices (iPods/cell phones/Wii). Both laptops have Windows 7. Router was replaced 2 years ago (went from Belkin to D-Link DIR-655) and the D-Link started acting like this a few months ago and is getting worse. I updated firmware on router last week in hopes it would fix it.

View 15 Replies View Related

Home Network :: TP-Link Wireless Access Point / Ethernet Switcher (TL-SF2005D) Fails To Connect?

Jun 6, 2011

I have just bought a TP-Link Wireless Access Point (TL-WA&01ND) and an ethernet switcher (TL-SF2005D).I have put the access point into client mode, allowing me to put it in my room and wirelessly connect to my router, allowing me to plug my PC in over ethernet and use the internet. However, after much fiddling with settings I cannot get it to work, as it continually searches for a network, and then fails to connect, despite the fact it is configured to use the network?I already have a similar setup with a netgear wireless G access point which works, and so I dont understand why the new box cannot do this when using what I believe to be the same settings.

Secondly I have an ethernet switch box which I bought to connect to the access point and switch the ethernet signal between my two PCs, my xbox and PC. This works fine with my primary PC (over my old access point) but when I try to connect my PC i get a DNS failure with auto IP settings and a gateway failure with manual settings, and other devices refuse to connect.

View 9 Replies View Related

D-Link DIR-655 :: FTP Fails And Crashes It

Jan 28, 2011

DIR-655 HW: A4 v.1.35NA
DNS-323 v.1.09 (latest)

I have setup DNS-323 FTP using the default port (21) as instructed in the manual.*Advanced/User: username/password. [code]....

View 2 Replies View Related

D-Link DIR-825 :: Update Firmware From Web Fails?

Apr 24, 2011

I bought my DIR-825 three months ago. The firmware seem to be from 2009, and the check-for-later-firmware functionality from the web interface tells me that my version (Current Firmware Version :   2.01EU) is the latest.

I don't believe that the firmware from 2009 is the latest, but have no idea on how to proceed.

My hardware in the web interface say this: (Hardware Version: B1     Firmware Version: 2.01E

The problem I really have is related to PPTP pass through (I think), but I thought making sure I have the latest firmware is always a smart move.

So, can the firmware-checker of the web-interface fail, or do I have the latest firmware?

View 6 Replies View Related

D-Link DIR-655 :: Port-forwarding Fails After Several Hours

Feb 4, 2011

I am using DIR-655 A4 router and I have a server that needs DMZ and a PC that needs a port.So, I have set the dmz to 192.168.0.100 (SERVER) and set the port 2000(or any) to forward to 192.168.0.2 (PC).What I found out was, the port forwarding works well for several hours and suddenly it fails and won't forward until I reboot my 655 router. I am really tired doing this every day. I tried firmware 1.21 to 1.35 and non of them were good.I know that 655 has good performance compare to its price but I think it has world's worst firmware.

View 9 Replies View Related

D-Link DIR-655 :: Webfilter Fails After Updating To 1.35NA?

Jan 19, 2011

I've been using the web filter with no problem with my A3/1.33NA router until I upgraded to 1.35 last week. After the upgrade, i did a hard reset and re-entered the websites manually from scratch to the DENY list. I didn't even reuse the saved config file. And now the router no longer blocks any of the websites in the webfilter page even when i selected the ALLOW option.

View 14 Replies View Related

D-Link DIR-601 :: Router Connection To Internet Fails

Apr 13, 2011

I cant get this damn thing to connect to the internet (att dsl modem). I have ran the installation cd mulitple times and also configured it using the http. If i reset it while everything is hooked up and it makes an internet connection using DCHP (I think its called), but i need a PPPoE connection.

It seems to change my password (the username one that access the modem). The way i know is it always has more characters that the one i was provided by my isp with (*****). I dont enter any information other than my username or password (IP is dynamic).

I have a westell F90-6100 as my modem.

View 6 Replies View Related

Cisco Wireless :: WLC 5508 - Link Test Fails?

Jan 10, 2013

I have a WLC5508 working fine right now, using IOS 7.3
 
When I try to do a Link test on some users to check signal quality, noise, etc... I received the error message below

View 6 Replies View Related

D-Link DIR-655 :: Security Scan Fails With TFTP Server Open / How To Close

Mar 18, 2013

Recently had an external security scan done on my DIR 655 and scan results are stating I have an accessible TFTP Server running. i've been through all the settings, and even upgraded to the latest firmware. Yet security scans are telling me I've got a TFTP Server running. Why would one be showing on the external interface, and how can I stop it?

View 7 Replies View Related

Wireless On Billion 7800N Fails To Connect

Jan 16, 2012

I am having issues with the wireless on my Billion 7800N My phone and other wireless items were able to detect and use the wireless until recently when now all I do is find it in the list, but when I go to use it, it says failed to connect.

View 1 Replies View Related

Can't Connect Wifi - Fails Association Test

Nov 21, 2012

I have a new Toshiba Portege. It successfully connects to 2 wifi connections but will not connect to a third (my home). I have other laptops connected successfully to my home network right now. So, the problem is specific to this machine and this network.

When I run an Intel diagnostic tool (Intel� PROSet/Wireless WiFi Connection Utility) I get a failure at the "association test". [Trying to figure out how to post a screen shot. I'll post it when I do.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz, Intel64 Family 6 Model 58 Stepping 9

[Code].....

View 6 Replies View Related

Laptop Periodically Fails To Connect To Wireless Internet

Dec 17, 2012

My laptop is having trouble connecting to the internet. Some of the time it is fine, but at other times it will not connect to my home wireless network (or any other open ones I can find) despite the network being in full signal. The only advice offered by the troubleshooter is to reset the wireless router. This does work (but is very irritating to flatmates!) but doesn't prevent the problem recurring. Only my computer has an issue, and sometimes it will manage to connect to the internet by itself, seemingly spontaneously. The laptop is set to connect automatically, and when not working it also does sometimes attempt to connect, (i.e. it says 'connecting') but cuts out again before managing it. The problem can last for a few minutes or several hours.

View 2 Replies View Related

Newly Build Computer Fails To Connect To The Internet

Jul 31, 2012

I just built a new computer that will not connect to the internet, but only while using my wall port, and only this new computer, and only while connected through the router. Totally bizarre, right?I just built a new computer with a fresh install of Windows 7. I set it up directly connected to the router, where I applied all windows updates. I then moved it to where my old computer is, which uses a wall port to connect to the router in another room, where this new computer then fails to connect to the internet or to the router's setup. The new computer's Ethernet LEDs will light up, and the computer will automatically obtain an IP address, but will not connect to the internet or even the router setup.

View 2 Replies View Related

Dell :: XPS 630 Fails To Connect To Internet On First Try - Restart Usually Works

Mar 31, 2013

Cold start it will not connect to internet but the other computers I have do so I know it's not an internet connection issue. 

Network Diagnosis fails to find anything nor does it make an internet connection. I only seem to make a connection on restart.

Win 7 64bit

View 1 Replies View Related

Connection Fails - Connect During Safe Mode But Not On Normal Boot?

Apr 11, 2011

My PC Info: Tech Support Guy System Info Utility version 1.0.0.1

OS Version: Microsoft� Windows Vista� Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5850 @ 2.16GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3069 Mb
Graphics Card: ATI Mobility Radeon HD 3450 , 256 Mb
Hard Drives: C: Total - 305242 MB, Free - 252510 MB;
Motherboard: Dell Inc., 0F700C, , .8QQVVG1.CN4864388L1948.
Antivirus: Norton Security Suite, Disabled

So I am having issues connecting to the internet. I can connect during safe mode but not on normal boot. I ran a diagnostic and it said that the IP Gateway failed. I read a previous post and did the command promp "ipconfig/all" and this is what it said:

Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersEbony>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Ebony-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....

I have norton, and have recently run Malwarbytes, Microsoft Malicious Removal Tool, and Dell PC Tune Up

View 6 Replies View Related

Linksys Wireless Router :: E3000 Setup Fails To Even Connect At All?

Apr 17, 2010

I have comcast Triple HD cable internet and I have been using a low end 5 year old Linksys Router.  I decided to upgrade and get the E3000.  So far I have had no luck at all getting it to work.  Setup fails to even connect at all.  I spent 2 hours on the phone with tech support.  There were in trying to get it up and running but we have been unable to get a TCP/IP number from my provider (comcast).  I hooked up the old router to see if any of my settings looked unusual but they seemed normal.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Fails To Connect / Recognize USB 3.0

Sep 11, 2011

E4200 does fail functionality on 2 area's:

- 1) Media Streaming Server

- 2) NAS supporting modern USB devices, which register with multiple personalities/devices in one physical USB device.
 
1) Is already known by Cisco and hopefully the choose to fix it properly
 
2) Must be known now. Multiple users are reporting this lack of support.

NAS functionality of E4200 does not work/ gives problems with:

- Toshiba StorE Alu 2S USB 3.0, 1 TB disk. PN: PA4239E-1HJ0

- Iomega eGo 1 TB USB 3.0, (black casing) , PN 31924500, RPHD-UG3
 
Both drives report themself with 2 devices under Windows 7:  1x USB storage decive + 1x CD readonly device?

View 4 Replies View Related

Linksys Wireless Router :: E4200 Fails To Connect To USB Storage

Jan 11, 2012

I got E4200 with latest firmware (updated two days ago) and WD Studion with 2 Tb drive (it is HFS+ file system)Once I connect this drive to router I am not longer available to access 192.168.1.1.

View 5 Replies View Related

Linksys Wireless Adapters :: WUSB600N V2 - Connection Fails - Can't Find WAP To Connect?

Apr 23, 2011

I purchased two WUSB600N V2 wireless adapters recently and have had nothing but problems on an otherwise stable network where I have iPads, iPhones, Netbooks, media centres, wireless printers, Notebooks and other USB PC-based network devices working without problems.
 
The WUSB600Ns are connected to desktop PCs, running WIndows XP SP3. I have removed the Linksys Network Management software and use Microsoft's wireless network management software.  I am running the latest drivers 1.4.10.0 for the cards. My WAP is a Belkin F5D-8236-4 running in WAP only mode. It is set to 40Mhz Channel 11 primary, Channel 7 secondary. Protected Mode is off, Broadcast SSID is on. I run WPA2-PSK AES for encryption. Note:  I've tried all combinations of bandwidth and channel settings.  I've run Netstumbler to find clear air channels - 11 seems best.
 
The issues are:

* seldomly connects at boot automatically without intervention.

* occasionally does not find WAP to connect to.

* sometimes will not connect to WAP - sits at "Acquiring Network Address".

* sometimes will not even get to Acquiring Network Address.

* Will often, once connected, after a while lose connection - the timeframe is inconsistent.
 
All of my other devices do not have these issues. I've been working on this issue for about a week trying to stabilise, even get a consistent failure pattern, but I'm about to send them both back.These are close to the most frustrating devices I've configured and I've got a lot of stuff on my network.

View 5 Replies View Related

Linksys Wireless Router :: Squeezebox Duet Fails To Connect To 1500

Mar 19, 2012

 I have a new Linksys 1500 router which I am using to replace an older WRT54GS.  They are connected to a wired router (BEFSR81) to allow a wireless network to work in conjunction with my wired one.  The WRT54GS ran as an access point.  The 1500 does not seem to have that option.  I have successfully been able to set up the new router and use it with laptops, ipads, etc.  Where I’m running into problems is with my Squeezebox.  Although I can see the network and enter a passcode into the Squeezebox, it never connects (the light on the Squeezebox is green (acquiring IP address from network).  It never gets beyond this point.  I have tried: Disabling securityChanging mode from mixed to various optionsDisabling firewallsNothing seems to work

View 4 Replies View Related

Linksys Cable / DSL :: WAG160N Desktop Detects Modem But It Fails To Connect

May 17, 2012

I'm using Linksys WAG160N - ADSL Modem/Router on one Desktop with Linksys WUSB Adapter. This connection is working fine.Recently I decided to add another Desktop wirelessly to share network, files and internet access. The second desktop is located in another room (approx. dist. is 30 Ft.)The second desktop detects the Modem but it fails to connect and it shows limited or no connectivity.
 
1. Allow Internet Access to both the desktops without loosing connectivity or without comporomising on speed.

2. Allow file/disk haring of desktop 2 with desktop 1.

View 1 Replies View Related

Cisco Firewall :: ASA 8.4 - Connection Fails When Host On Inside Tries To Connect To Server On Outside

Mar 9, 2011

We are using an ASA with 8.4 in transparent mode. Connection fails when a host on inside tries to connect to a server on outside. This server uses mac-address 0100.5E00.0000 to load balance but replies with real mac-address.Firewall logs "Deny TCP".ARP inspection is disabled.

View 2 Replies View Related

Linksys Wireless Router :: E1200 Fails To Connect To Frontier FIOS Internet?

Jan 3, 2012

I am trying to set up my E1200 router to Frontier FIOS internet. I went thru the setup and it failed to connect to the internet. What settings do I need? Frontier says that it should find the connection automatically.

View 1 Replies View Related

Linksys Wireless Adapters :: WUSB600N Doesn't Work Properly And Fails To Connect Network

Feb 28, 2011

I have the WUSB600N wireless adapter, and I'm using it with Windows 7 Ultimate 64bit. I'm using the latest driver available, 3.0.10.0. When Windows first starts, the adapter is not working properly and fails to connect to any networks, no matter how long I wait. If I unplug it and plug it back in after Windows is already running, I do not have this issue. This also does not occur when "restarting" the machine; only when turning the machine off and then back on.

View 2 Replies View Related

TP-Link 3G/3.75G Router :: Windows Was Unable To Connect To TP-Link 3020 B5F9AD

Jan 30, 2013

Region : Others
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP :

After I configure the WAN setting on TL-MR3020, my laptop unable to connect to my TL-MR3020 anymore, the message says "windows was unable to connect to TP-LINK_POCKET_3020_B5F9AD".

View 2 Replies View Related

D-link Dir-601 :: Unable To Connect To Internet - Devices Able To Connect To Wifi

Mar 1, 2013

In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)

Following are my router details

FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA

View 12 Replies View Related

D-Link DIR-655 :: Cannot Connect Using Remote Desktop Connect From External PC

Jun 16, 2011

I'm trying to connect to my home laptop from work.  The home laptop is connected to DIR-655 router.  I set up the internal and external ports to 3389 using both TCP and UDP protocols with the Application as "Remote Desktop".  From my work PC I enter the external IP with :3389 and it fails to connect. I have also tried accessing internally which is failing too.  All computers are running Windows 7 Home Premium Remote Access is enable on all.

View 1 Replies View Related

Cisco :: NCS (ver.1.3.0.20) Login Fails

May 18, 2013

I have an issue with accessing a Cisco NCS (ver.1.3.0.20) form the GUI interface. It claim the password is wrong...From the CLI I have access.... Ah I can just change the passwords I thought. But no way.. dosent work!
 
[code]...

View 6 Replies View Related

Pinging Router Fails 5% Of The Time?

Sep 20, 2011

Lately I've noticed that my internet connection has been less than stellar. I will be playing an online game or surfing the web, and every so often I'll freeze up or things just won't run smoothly. My network consists of the following...All of my computers and devices connect to a Cisco 16 port gigabit switchThe switch then connects to a Peplink 20 Dual WAN routerThe router connects to a cable modem as well as a DSL modemThe other day I was trying to diagnose the problem, as well as update the firmware of the router. While I was on the main "status" page, I noticed an error saying that I couldn't connect to the router. It quickly cleared and everything was working fine. This of course made me think that my issues have to do with my connection to the router, and not with the internet service itself. I then tried ping -t to two other computers on the network, as well as the router. After 5 minutes of pinging, the connections to the two computers had zero fails, while the router connection failed about 5% of the time. I ran the same check from the other computers on the network, with similar results.So, I know that the issue lies with the router (I think), but that's where my brainstorm ends.

View 4 Replies View Related

Wireless Fails But Wired Works

Nov 9, 2011

I have a brand new broadband service in my new house.The problem I have and the ISP support cannot understand is that using my laptop in i connect wirelessly to internet as soon as i request a page the router losing connection to the internet.But I can use my smartphone wirelessly that does not cause router any problems.If I use the lan cable the internet is fine and only disconnects every now and again.

View 1 Replies View Related

Cisco Application :: ANM 4.2 Fails To Add ACE20-MOD

Jun 2, 2011

I have been trying to addACE20-MOD-K9 in ANM 4.2 (0) but when I try to import it times out and I get
 
""Failed to import ACE configuration: Device discovery failed: Connection timed out.""
 
I have double-checked credentialn and access rules on the module and they seem OK. I am trying to add the module with the Admin credentials and ssh/telnet access is permited.
 
Is this the right way or I'm missing something. Module version is A2(3.2a)

View 5 Replies View Related

Cisco :: LMS 4.2 Configuration Archive Fails?

May 3, 2012

I have a not-so newly installed LMS4.2 Linux appliance. Here is my configuration archive summary:
 
Config Archival Status
No. of Devices
Successful 7 Failed 1338 Partially Successful0 Total1345 Configuration Never Collected 1338  

[Code].....
 
Which seems to mean that SSH does not work, which is false as I manually connects to the device from the LMS host successfully. Network devices access is authenticated against ACS servers using TACACS+ so there should be no problem with credential discrepency here.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved