My screen on my desktop computer is not working. I would like to connect my desktop to my laptop to view my files on the desktop and transfer them to my laptop.
My laptop is an HP dv7 Pavillion with windows 7 with mircrosoft office 2010 professional.
I have a Vostro 460 desktop, recently bought, and then realized it would be better to add wireless router. Bought router and a PCIe wireless mini card that was suggested for my PC on Dell order site. The card arrived and am trying to install. The end plate with the aerial socket is not compatible with the removable access blanks in rear of case. Have I been sent an incorrect or unsuitable card, or is there some trick or adapting needed to install this card?
View 3 Replies View Relatedmy laptop only has hdmi port and my tv only supports s-video and scart connection but i've an old pc that has s-video connection and i was wondering if i can "send the screen" from my laptop to my old pc via lan is there a way of doing that at high fps? remote desktoping works but it's very slow.
View 2 Replies View RelatedWhen program freezes, what do I do?
View 1 Replies View RelatedHow can I move the screen to the right because it is missing me a part so how can I do it?
View 1 Replies View RelatedCannot start my lap/Toshiba NB205-N311/W . Only: Toshoiba Innovation comes up and then black screen , no way to log in, the hard disk lamp flashes once very shortly that's it. I tried CTRL-ALT-DEL, the same as above discribed. Nothing works no F2, F8, the hard drive just won't start. I even took out hte battery and tried only with the cable(just found this advice on the IN, it said the screen will work), but nothing I like my little lap and it always worked fine till today.Well nearly, since some days I could not restart without using CTRL_ALT DEL/Enter
View 2 Replies View RelatedI installed google toolbar for taskbar but I want yahoo for my homepage
View 1 Replies View RelatedHere is my Desktop Specs:
Windows XP Svc Pack 3
Mainboard :Asus P5KPL-CM
Network Card :Atheros AR8121/AR8113 PCI-E Ethernet Controller
Current Router - LinkSys BEFSR41 (Hardwired, CATV cable)
Static IP - 192.168.1.100, 255.255.255.0, Gateway 192.168.1.1
Problem: I purchased a new GB router, Dlink DIR825, wireless and 4 ports, and cannot connect to it to set it up. I need to get into it to change its IP address from 192.168.0.1 to 192.168.1.1 and to make a few other changes. I have 6 different ethernet cables, all of which work with my desktop as well as my laptop. I can get into the new Dlink router just fine with my laptop so it is not a bad port on the new Dlink. The cables work with my existing router and my new router using my laptop so it isn't a cable problem.My internet connection is Hughesnet (DISH) which uses the 192.168.0.1 address, the same as the new router. So here is what I have tried:
1. Powered down Hughes router, new router, and old router.
2. Removed cable from Hughes router to old Linksys.
3. Changed static IP on desktop from 192.168.1.100 to 192.168.0.50 and Gateway to 192.168.0.1.
4. Rebooted
5. Connected ethernet cable from desktop to Port 1 on new router.
6. Powered up new router.
7. Brought up Browser and entered the 192.168.0.1. Nothing happens. The Port light on the new switch shows the connection properly and the other lights are on properly, except for the Internet light which I haven't hooked up yet.
The above does not work so I powered down everything and then:
1. Connected the cable from the Hughes internet modem to the Internet port on the new modem.
2. Powered up Hughes modem and waited for all lights to come on.
3. Then powered up new router and waited for all lights to come on. This time the Internet light came on like it should.
4. Powered up my desktop.
5. Brought up Browser and entered the 192.168.0.1. Nothing happens. I expected this since there would be a conflict with the 2 modems having same IP.
Next I tried to basically set my desktop to use DHCP and removed the cable from the Hughes modem to the new router. Powered down everything then brought them up one at a time, Hughes modem, router, and PC. Still not able to connect to the new router.I also used my laptop to set the new router to 192.168.1.1 and reset my static IP to the original 192.168.1.100, 255.255.255.0, Gateway 192.168.1.1. Still nothing and I couldn't even ping the router.
my screen goes blank if not used after about 10 mins how do i extend time?
View 1 Replies View Relatedset up a wireless network connection? i have a wireless router but cannot access it using my browser?
View 3 Replies View Relatedi just bought a netgear router. i was able get into routers login screen once. thought every thing is good? everything looked correct? now i cant get into login screen at all again. im confused it should be easy. either use 192.168.1.1 or 192.168.1.2 or 192.168.0.1 and 192.168.1.254. i tried them all with no luck.
View 3 Replies View RelatedSet up a wireless network connection? i have a wireless router but cannot access it using my browser?
View 1 Replies View RelatedWhy should I need a router with a touch screen? Just because, its fancy or just because its bringing a new trend to wireless networking? I wanted to buy the D-link DIR 865 but it became vaporware. Now this came up Almond of Securifi. Dong Ngo of CNet has reviewed it. Does it really make sense to buy a wireless touch screen router, leaving the old trend of traditional routers with web interface?
View 2 Replies View RelatedI have a small home network, which until now has been set up via a Verizon DSL modem/router. Today I added an ASUS wirless router to the network, and that is working just fine. However, I did not think to shut off wireless service from the modem before I switched over. However, now I can't seem to find the IP necessary to access the modem's setup screens. Whereas before I logged in at 192.168.1.1, I get nothing there now. The new router is at 192.168.2.1 and I have not be able to puzzle out any IP that gets me access to the modem settings. Is there way to find that screen, without totally redoing the setup process?
View 2 Replies View RelatedI have the Clear Hub Express (Router/Modem combined) and I am trying to connect a separate Belkin Wireless Router (Model F5D8233-4v1) to allow additional "hard wire" connections. Correct settings required for the Clear Hub Express and any additional information that can instruct me on how to access the Belkin set-up screen if required. The standard 192.168.2.1 is not allowoing access to the Belkin Router.
View 1 Replies View RelatedI have a Cisco ASA and have a client that has a NetScreen 5200 and we are seeing issues on the ASA that show the error [code] We have removed the repaly command form the ASA and wew are still having the issue. The other issue we see when this happens is that we see Fin,Ack sent from both the Rmote End to the Local End as well as from the Local End to the Remote End but it seems that they never arrive either way and then both hosts are sending RST, ACK.
View 1 Replies View RelatedI have a client that has a newer Dell T310 - 8GB - Xeon 2.4, SBS 2011. Just went to a clients to move the office from one building to the other, couldn't log into the server so went to the terminal and saw the machine wasn't responsive in windows - users still able to access files and Quickbooks. I had to force shut down the machine.Now I fire it up, it gets to the login screen, and when I log in it gets stuck on the welcome screen. I can get into safe mode, i do not see any errors in event viewer that jump out. Hard drive lights are blicking like crazy at the welcome screen. But still can't get into it, and then the machine seems to lock up.
View 19 Replies View Relatedi changed the hd in a nm-cue and configured the router accordingly and i opened a session to it but the screen is blank.
[code]...
When i right click to open attachments some will not open, the page freezes and i have to booth computer to get rid of it, this only happens on some attachments, most open ok,i know where they are coming from so they are safe to openI've got Vista Home Basic 32
View 1 Replies View RelatedI am trying to change the name of my wireless network but when I go to the 192.168.1.1 and type in my password, it just goes to a blank screen. I've accessed my router a lot of times before this way. It is a lisksys router.
View 1 Replies View RelatedAbout three(3) months ago, I attempted to set up a wired network between a laptop running w-7 and a desktop with w-xp, sp3. Shortly afterwards, I started getting blue screens with error messages and codes about device confilcts. After disconecting the laptop, I still have the problem sometimes. I looked into the system, and found twenty-seven(27) items with yellow exclamation marks on them. Should I delete them or just disable them?
View 3 Replies View Relatedi have a dell desktop and a dell laptop when i am using the internet on the desktop cancel appears on the screen sometimes if i click on cancel it does not crash but works other times the internet crashes. this does not happen on the laptop.
View 1 Replies View Relatedmy acer laptop is only showing half the graphics when on my email pages a small band of the emails and the top half blank son i have to continually scroll up to read the e mails the screen is fine on every other page?
View 1 Replies View RelatedI'm using a wireless usb on a home network. The problem is only this desktopBasically what happens is if I try to play an MMO on fullscreen(windowed is fine) I get disconnected from the game server or if I'm playing a single player game and alt-tab out the internet won't work unless I close the game. I typically get the "limited or no connectivity" message. No other problems with the internetTech Support Guy System Info Utility version 1.0.0.1OS Version:[CODE]
View 5 Replies View Relatedblack screen with small line in left corner blinking
View 1 Replies View RelatedWhenever I disonect a network drive - the computer blue screens.I have run all of the usual driver fixes and no solution, (sfc /scannow, 3rd party drive correction, etc).
View 2 Replies View RelatedMy Vaio's screen is dead due to a dead graphic card (long/short/short beeps when starting up). But i can't easily remove the harddisks and connect them through an external USB-SATA because they are in raid 0 configuration..The laptop still works (i hear the windows 7-soundlogo) but I can't get access to it since i cannot see what i am doing for installing eg VNC or Remote Desktop software. Command line commands? try portable VNC installations? remove harddisks and bring them to a recovery centre?
View 1 Replies View RelatedI've recently noticed that i get a large drop in download speed when i either play a game or watch a video on full screen. I first noticed it when using a program called jDownloader. I contacted the developer and he told me to increase the priority of the task "javaw.exe". This did not solve the problem. The problem also occurs during any form of downloading (Steam or browsers. I haven't tested torrents yet.)
View 2 Replies View RelatedI am using a Mac and would like to view the live feed full screen. Is this possible?
View 3 Replies View RelatedI am having trouble accessing my DIR-655 remote management screen via ip to my network.To make sure i didnt have any odd settings, i did a hard reset on my router first.I then enabled remote management, and left the default port 8080 I try to access viw the ip address on my status page suffixed by the port 8080 [URL] page cannot be found.I then enabled https and tried to access via:[URL]page cannot be found.I then setup a entry in the virtual server to redirect http requests to my workstation hosting IIS7, if i connect to localhost, the iis welcome screen appears, but if i browse to my ip, i get nothing.I am using Cox residential service, i called them and they informed me that they do not filter or block requests in any way.
View 12 Replies View RelatedI have several associates that I am supporting who are working at a customer site. Two of those associates have recently started experiencing BSoD shortly after connecting to the customers network using the AnyConnect client v2.4.1012. I do not know for sure that AnyConnect is causing the problem, or is conflicting with something resulting in the blue screen, but in searching it appears it may be. The two associates having the problem also have the AT&T Global Dialer client installed on their assigned computer, and I have seen this has been a problem in the past with v2.2, though this was supposedly resolved. The other curious thing is that this just started happening, though they have been using the client for several months now, and the AT&T client has been installed the entire time.
All computers are XP SP3, Windows firewall disabled, McAfee 8.7.0i, and Verizon VZ Connect. The only computers with this problem are the ones with the AT&T dialer, and like I said, this just started to happen after several months without an issue.I would really like to avoid removing the AT&T client as they need that to connect to a different customer's network.
My laptop was working fine.Yesterday, I installed VS2008, Google Chrome, and MSDN.Today, when I start my laptop, the screen brightness goes very low when I reach the "enter your Windows 7 password" page.
I have a Sony Vaio vgn-nr11s/s Also, my wireless connection and LAN seems to have vanished into thin air.
Ive set my laptop to stay on when the lid is closed. Now when i do close the lid, the touchpad reacts to the screen and starts doing all sorts of crazy things, zooming in and out, moving the taskbar around, opening things and deleting things.Ive resorted having to place a cloths or kleenex folded in half over the touchpad when i close the lid. ive also disabled the touch and used a mouse and no problems. I have updated the drivers and dell toucpad, ive even uninstalled everything and installed the synaptic drivers and touchpad software.. Yet another problem with the l521x.How can i fix this? maybe the touchpad is defective and has to be replaced?
View 10 Replies View Related