Nvidia Nforce 10/100 Ethernet Says Its Working But Won't Connect?
Jun 12, 2012
when i connect an eth cable to my pc everything says its doing its job righht ie driver up to date etc but i cannot get it to show as connected , all i get is that a cable is unplugged warning .
View 8 Replies
ADVERTISEMENT
Apr 21, 2012
It keeps saying the connection between the modem and the computer is broken. I've installed a new ethernet cable. it works then it drops. we have hughes net here. the techs have been out and cannot isolate the problem.
View 3 Replies
View Related
Feb 23, 2011
I've recently reformatted an old hdd and i've installed windows xp professional on it and as usual the first thing that came to mind was to go on the internet to download all the drivers i needed. I ran into my first problem, apparently i can't access the internet because i don't have the driver that allows me to use the internet. I've downloaded the same driver that i had on the other hard drive, but it's just not doing anything, i can't create a Local Area Network in my connections. I'm on the same computer as said computer, except different hard drive. Don't have any of the cd's nor do i know which drivers were installed on this hard drive.
Here's some of my computer spec's:
Microsoft xp
CPU type: AMD athlon 64, 2000 MHz(10 x 200) 3000+
Motherboard Name: ECS nForce3-A(5PCI,1 AGP, 2 DDR DIMM, Audio, LAN)
Motherboard Chipset: nVidia nforce3 250, AMD Hammer
System Memory: 1024 MB
BIOS type: Award(09/16/05)
Network Adapter: NVIDIA nForce Network Controller - Packet Schedular Miniport
View 2 Replies
View Related
Jul 2, 2012
I am currently having trouble with my NVIDIA nForce Networking Controller. Every morning when I turn on my computer, I have no network connections available, even though I am connected to a home network via Ethernet cable. In Device Manager, there is a yellow triangle with an "!" inside beside the following entries:NVIDIA nForce Networking Controller (of course)Standard Enhanced PCI to USB Host Controller
View 5 Replies
View Related
Sep 25, 2011
I cannot seem to locate a driver for the "Nvidia nforce networking controller." ALL information I can glean from the computer does not show anf further information or part numbers or numbers after "nForce".
HP dv6704nr Pavilion Entertainment PC
View 3 Replies
View Related
Jun 21, 2011
I recently installed windows 7 ultimate and my NVIDIA GeForce 7000M /nForce 610M can not connect. I re-installed the drivers and it still can not start. only my wireless works. Compaq pressario f763nr laptop.
View 1 Replies
View Related
Jun 14, 2011
My computer is a Dell Inspiron desktop 531S. I use Windows Vista.
I have an NVIDIA GeForce 6150 LE INT with integrated NIC card. The ethernet port isn't recognized though. I have downloaded all the latest drivers and updated my BIOS and everything I found listed about.
View 8 Replies
View Related
Nov 21, 2011
I just installed nVidia Nforce drivers for my Asus 750i motherboard, I show I have internet connection, however I can not get windows to pull up a site. TRIED everything reset modem, router, checked all settings. When I pull up the networking system information, it states connection status: disconnected via the Nvdia controll panel. Reset everything back to factory defaults still nothing....IT was working, I intalled I tunes, and then it stopped....I uninstalled Bonjour thinking that it might be the issue....nothing
View 1 Replies
View Related
Sep 17, 2011
I have just wired my house and have a cisco 2950 switch running in the basement. every rj45 jack in the house works with everything except one computer. we have a HP with an nforce 4 chipset. this computer was connected through a hub and to a netgear router using the wires in the walls, the same wires and ends this switch is connected trough now. This computer stoped detecting a connection when we moved it off the hub and to the switch. all the ends and punch downs are using B wiring pinout. I have tried a new cable, when i plug any cable from the wall jack to this laptop it works, when i move the same cable to the HP it does not detect any cable plugged into it. when i setup ICS on this laptop it will connect and does detect the connection with the same cable running from the wall jack to the HP that it previously did not detect.perhaps the HP wants to use the 2 pairs that are other wise dormant? im about to install a new nic and see what that does but i can not understand why the Nforce nic would not connect to a cisco switch
View 3 Replies
View Related
Nov 8, 2011
NVIDIA is blocking my internet connecting on only one of my computers and it has become somewhat of an urgent situation. I need to know how to get rid of it immediately. I have no idea what NVIDIA is. I was using my computer and going on the internet without a problem and 3 hours later this issue came about.
View 2 Replies
View Related
Sep 20, 2011
After getting the cable set up (some new wireless modem that comcast gave us) we were able to connect to the internet once, after putting in the password, but after that the next day our computer would not recognize any networks at all, it's just say no connections are available.I already:-restarted computer,-reset modem (we used to have a router and a cable modem but now only the wireless modem)-rolled-back drivers,-disabled then re-enable driver (did NOT uninstall or reinstall)-opened the computer up, take out the adapter, tryed and got the dust off-unscrewed and rescrewed antenna- tested a laptop, and it had an internet connection - and probably a few other things which I can't rememberLast time on the computer, I uninstalled a few things with revo, ran registry cleaner, browsed internet, and installed a new nvidia driver (after the problems arose). I was able to install a netgear wireless usb adapter (which is how I'm on the internet right now), but it frequently gitters and I can't use the NetGear for very long seeing as how a different computer uses it.
View 3 Replies
View Related
Jun 12, 2011
I have reinstalled XP on an older PC and have run Driver Reboot to check all the drivers are ok. So far so good, except - I cannot get onto the internet.... router etc is working... have reinstalled the nvidia nforce networking controller (as this kept coming up with errors). When trying to connect, error message is: limited or no connectivity.
View 5 Replies
View Related
Jul 9, 2011
I have an HP Pavilion notebook that was given to me by a friend who had upgraded to a new computer. Due to the fact that she no longer remembered the password to the computer I did a clean install of Windows Vista Home Premium to gain access to the computer. Unfortunately, while the computer seems to be running perfectly, when I attempt to find network connections my computer not only can't find wireless connections, but it doesn't even allow the option of manually creating a wireless connection under my Internet options.My computer has a built in NVIDIA nforce Network controller listed under my network adapters and when I check its status it states that it is working properly, yet it doesn't detect any wireless networks. In addition to this, I've read online that the wireless indicator light on my computer should switch from orange to blue when turned on, but even with my wireless switched on the light remains orange.I've also clicked the update drivers option on the NVIDIA network controller, but it states that the drivers are current and changes nothing.
View 14 Replies
View Related
May 29, 2011
I have an Acer AX3400 (windows 7). I'm trying to install wireless router Netgear WNR3500v2. I did not succeed sofar. Do I have to uninstall NVIDIA drivers first?
View 1 Replies
View Related
Feb 5, 2011
I was using desktop computer and got infamous blue screen of death Rebooted and everything was fine except could no longer could see LAN connection or connect to internet The desktop computer also has a wireless card that allows me to connect to router wirelessly but only get "connect with limited access" I have a cable connection through a router and tried connection dsl directly to ethernet and bypassing router but no change Router works for other laptops to connect wirelessly I can see both network adapters in the device manager and both say devices are working properly Here are the results of ipconfig /all:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersCooper>cd c:
c:>ipconfig /all
Windows IP Configuration[code]......
View 5 Replies
View Related
Feb 1, 2012
Basically a while ago last year some time in December my desktop got turned on one day and the internet wasn't working. I tried using my wireless to connect but even that was stuck on "acquiring network address". Ive played around with it abit since then and now my etherent cord shows up as connected but when I go into properties it says no packets getting sent / received. In device manager all my network adapters are cool and dont have any "!" next to them.Ive also tried the cord in my laptop and it works cool.
View 3 Replies
View Related
Jan 28, 2013
I have two ethernet cables, a long one and a short one. The short one works fine, but the long one does not work with my computer. It has worked with other laptops, so I am fairly sure the cable itself is fine - is there anything I can do
View 3 Replies
View Related
Mar 25, 2011
Ive been using my Sony Vaio laptop (windows 7) to connect to my uni halls internet connection by ethernet cable (and keysurf login) for months with no problems, now all of a sudden my ethernet cable is not being recognised. its not a problem with my connection or cable as other people's laptops work on it. and its not a problem with my hardware as my laptop works in other people's rooms. its just the combination of my laptop and my connection. My friend did something along the lines of resetting the IP address, but not really sure what he did. So i've done a full recovery of my computer.
View 3 Replies
View Related
Nov 14, 2011
I am trying to connect a pc with a cable modem using a cat5 UTP cable.I initially checked all the wires of the cable with a meter and then punched the RJ45 connectors to both ends and also checked them with a cable testing device and the straight through mappings were correct, but when i connect the two ends to the cable modem the respective lights do not show up. I have not tried the wire from the pc to the cable modem yet. The cable length is 72 meters.
View 13 Replies
View Related
Mar 18, 2012
"Ethernet Connection has stopped working".Its stopped working again and I've run the Network Test and the results are in the file REG.txt attached. I can connect to the internet via wireless OK but I had wireless turned off to run this test.I've proven the ethernet cable OK by connecting another pc to it which works OK.
View 12 Replies
View Related
Jul 2, 2011
My custom built desktop is not recognizing an ethernet cord. The lights are not coming on when I plug it in. The device manager does not show network adapters. Im not sure where to find it/ not sure its there.
View 6 Replies
View Related
Oct 14, 2011
I was just browsing the net when all of a sudden internet lost connection.I am using Windows 7 64-bit Home Edition.I tried these solutions, but didn't work;
---reboot pc
---turn off the modem, wait 10 minutes and turn it back on
---ipconfig /release, /renew in admin mode
---built-in Windows troubleshooting
---updated drivers
---use different ethernet cables
I contacted a floormate (I'm in college) yet his wired internet works. I have tried wireless. It worked.I have been using the connection for months and this is the first time it has happened.url...
View 1 Replies
View Related
Nov 22, 2011
I recently installed Arkham City on my computer played it for a while, tried google chrome, gave me a corrupt profile error or something (internet still worked and was connected at the time) restarted my computer and now it's telling me there isn't an ethernet cable connected to my computer.
Here's what I tried so far:
-Uninstalling and reinstalling the driver
-Updating the driver
-Using the network troubleshooting for windows 7
-Doing a system restore before I installed the game (gave me an error saying could not complete restore)
-Currently scanning my computer in safe mode with networking (seeing if that might work, doesn't) with malewarebytes
-Unplugged and replugged the router and modem
-Checked the router on another computer to see if there's a connection (there is none)
-Checked the router to see if there is a light in the port connected to the ethernet, it's blinking at a very slow a steady pace, unlike the ones around it which are solid green lights
-Tried the ethernet cable on another computer, works fine.
computer specs:
Windows 7 64-bit home premium edition
Gigabyte GA-MA790X-UD4P
NETGEAR router WNDR3700
View 2 Replies
View Related
Apr 22, 2011
The other night we had a thunderstorm. It kicked me off the internet. Now, I can connect directly to my computer to my laptop (wired), but when I try and establish the connection between the Cable Modem and the Router...it will show a connection between my PC and my netgear WND3400, but not between the router and the cable modem. Also, the ethernet port on router does not light up when connected to modem.
View 2 Replies
View Related
Mar 5, 2012
I was having a cleanup of the desk and unplugged the cable shortly, and after plugging it back in it could no longer find any connection. The only way I seem to be able to get connected to the internet now is to run a cable to my ethernet switch, and then onwards to my computer itself. Even when doing this the net seems to be very slow, won't connect through Chrome etc or just flat out won't connect.
View 5 Replies
View Related
Nov 15, 2012
So I have an HP Pavilion dv9000 laptop with window 8 installed and when I try to connect to the internet I keep getting an error that says the "Ethernet" Adapter is not working properly. I used to be able to go on the internet and then my dad had my computer for a while and now it's not working.
View 7 Replies
View Related
Jul 28, 2012
My computer is a Dell Inspiron with Windows 7 Home Premium Service Pack 1. A few weeks ago, it stopped working and would not let me log in. I fixed that problem by launching Setup and downloading the Windows 7 installation from a jump drive. The new problem is that I cannot connect to the internet at all. My wireless connections will not show up and when I hook up my ethernet cord, it will not show up either.
View 10 Replies
View Related
Jan 30, 2012
I have a Dell Studio running windows 7 sp1. yesterday i was on the internet as normal. Today i was able to connect via my schools wifi, but not my ethernet cable. Device manager shows that my ethernet port should be available.
View 3 Replies
View Related
Mar 28, 2012
My sony vaio E series VPCEB34EN ethernet driver does not work. It's a one year old machine. The hard disk crashed and my recovery disc also did not work. So, had to re-install. Now, no working ethernet port.Wireless works fine, but I need ethernet connection for my work?
View 1 Replies
View Related
Feb 8, 2013
I get the message "unidentified network - no internet access" on my computer since my upgrade to Windows 8. I'm using an Actiontec GT704-WG DSL modem/router connected to an ASUS M4A79XTD-EVO motherboard. I can get wireless access to my computer - a desktop - from the modem but not from the cabled DSL. Wireless is slower and less reliable it seems
View 2 Replies
View Related
Feb 15, 2012
I have an ASUS X58C laptop which has been working OK to the internet via the ethernet cable but it has stopped working.I used the laptop via the wireless connection to access the internet while away from home and on my return I can not connect via the ethernet but I can connect OK via wireless. The results with the wireless enabled are :
C:>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection* 13:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
[code]....
I can see that the ethernet adapter(s) are shown as media disconnected but I don't understand how to make them connected. I also don't understand why there are two ethernet adapters or what the Tunnel Adapters are.Before I did the ipconfig command I went into Control Panel/Device Manager/Network Adapters/SiS Ethernet Controller, right clicked and selected the Update Driver Software which searched the internet for a driver and installed it.
View 7 Replies
View Related
Jul 14, 2011
I live in a frat and I am currently researching how to design and configure the most efficient network for the house. However, one of the other big problems we have is connectivity of our ethernet cables. We have an IT room with 2 switches that feed ethernet cables to all parts of the house and connect to an ethernet box in the wall where we can simply wire in our internet connection. We have wireless routers too but to keep the bandwidth usage across the WAP's I want to let people use the wired connections. However, many of the connection in the house do not work at all. I plug in my laptop to the wall jack and it gives me the No Internet Access notice. I don't understand why it works in some rooms and not others. All jacks seem to go into the same switches at the other end so I cannot figure out what the problem could be.
View 2 Replies
View Related
Jun 13, 2011
My Ethernet cable connecting my computer to my router is not working. It was just working a few days ago and I have connected it to a different computer and it worked on that
View 1 Replies
View Related