My computer is a Dell Inspiron desktop 531S. I use Windows Vista.
I have an NVIDIA GeForce 6150 LE INT with integrated NIC card. The ethernet port isn't recognized though. I have downloaded all the latest drivers and updated my BIOS and everything I found listed about.
I recently installed windows 7 ultimate and my NVIDIA GeForce 7000M /nForce 610M can not connect. I re-installed the drivers and it still can not start. only my wireless works. Compaq pressario f763nr laptop.
View 1 Replies View Relatedwhen i connect an eth cable to my pc everything says its doing its job righht ie driver up to date etc but i cannot get it to show as connected , all i get is that a cable is unplugged warning .
View 8 Replies View RelatedIt keeps saying the connection between the modem and the computer is broken. I've installed a new ethernet cable. it works then it drops. we have hughes net here. the techs have been out and cannot isolate the problem.
View 3 Replies View RelatedI just installed nVidia Nforce drivers for my Asus 750i motherboard, I show I have internet connection, however I can not get windows to pull up a site. TRIED everything reset modem, router, checked all settings. When I pull up the networking system information, it states connection status: disconnected via the Nvdia controll panel. Reset everything back to factory defaults still nothing....IT was working, I intalled I tunes, and then it stopped....I uninstalled Bonjour thinking that it might be the issue....nothing
View 1 Replies View RelatedYesterday I was on my computer when all of the sudden my internet stopped working. I am using windows 7 and at the bottom right I see a big "X" over the small computer icon. I already tried a computer reboot, a router+modem reboot, system restore, and I even reset the power to the room of the modem+router from the fuse box in my house. I tried everything.
I'm sure the problem must be from the actual cable or mother board itself. ( I hope it isn't ) I tried blowing out any dust from the ports and making sure that nothing was blocking the connection. I fell asleep last night with the internet not working, and woke up to it working. Every other computer in my house works except for mine. I tried all of the router ports as well. I did not attempt another ethernet cable though because my room is far and I would need to make a very long one.
An older post on this forum told me to remove the adapter's driver software and restart the system. I did this, and it tried to install the software on startup but it keeps failing when installing. Forcing it to look for new driver software resulted in it saying the best software is already installed.
View 4 Replies View RelatedI have searched the forums and found that there have been others with the same problem as me,but none of the solution offered was working for me so I decided to start this thread.I have an Acer laptop that wont recognize my ethernet cable, it says that there is no cable connected.
View 1 Replies View RelatedI have a computer that runs windows 7, and I run an ethernet cable from netgear router into my computer. It used to run fine, but all of a sudden it stopped recognizing the ethernet cable, and I can not access internet.
I know it is not the cable because I can plug in the same ethernet cable to my laptop (runs XP) and it recognizes and I can access internet.
Also, I know it's not the slot on the router because because I switched places with my other ethernet cable that plugs into Netgear Powerline Ethernet Adapter for my Xbox, and the slot recognizes the adapter just fine.
So I am thinking it has to do something with Win 7 or the computer. My computer does have the wireless capability, and I am running it on wireless right now.
I have tried 3 cables and all three are not recognized even though they are plugged in. I have uninstalled network adapter and re installed it and i have updated the driver still nothing so i don't know what to do next.my laptop is a hp pavilion g6 series
View 10 Replies View RelatedEver since moving back in with my dad, I haven't been able to connect directly to the modem. I can connect to the wireless network, but whenever I try and plug straight into the modem, nothing changes and I stay on the wireless. I'm running Windows 7?
My computer specs are as follows (directly from the TSG SysInfo application):
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3766 Mb
Graphics Card: Intel(R) HD Graphics, 1755 Mb
Hard Drives: C: Total - 476837 MB, Free - 162910 MB;
Motherboard: Acer, Aspire 5742G
Antivirus: avast! Antivirus, Updated and Enabled
in the past my laptop has been able to connect directly to the internet using an Cat5e cable, but recently when I have been trying to direct connect, I have been unable to, and not sure when the problem started because I always used WiFi and it worked great. I do a lot of messing around, not only with my network, but with my laptop settings also, so something might have gone bunko. I have done much troubleshooitng, such as trying to update drivers, checking to see if the hardware was disabled, etc...
View 1 Replies View Related i just upgraded my laptop
Acer aspire 5551
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) II N830 Triple-Core Processor, AMD64 Family 16 Model 5 Stepping 3
Processor Count: 3
RAM: 7930 Mb
Graphics Card: ATI Mobility Radeon HD 4200, 256 Mb
Hard Drives: C: Total - 953766 MB, Free - 577936 MB; E: Total - 99 MB, Free - 70 MB;
Motherboard: Acer, Aspire 5551
Antivirus: Norton 360, Updated and Enabled
and I am missing a few thing's since installing the windows 7 ultimate, the main thing is that the drivers for my Ethernet connection (wired) are now missing! I have searched online and with Acer and have downloaded a zip file FULL of different scary looking programs that don't make sense to me and none are simple enough to say "Ethernet driver for windows 7" .I can't access the interwebs in my OPS room without it being through an Ethernet cable.Here is a screen shot of the Ethernet controller window.
I have an ASUS u56e laptop running Win7 Pro that I bought in Aug 2011. Unfortunately my problems started when I was working in East Timor and could not take it anywhere except the IT department where I worked. It is true that for a while I was using the LAN at work and also at my hotel where numerous ISPs were used at various points in time.
I have progressively lost almost total use of the wireless capacity of the machine and this is regardless of where I am using the computer (country, state, public or private networks). Very rarely will I have access and then not for long. When it is not working I will get a message saying that a network adapter cannot be found.
I have updated the driver software and experimented with the power settings. I have also uninstalled an ASUS utility that I read might have been a problem. About the only thing that sometimes works is to disable the network adapter, shut down, and then restart the computer. But not for long.
There is WiMax capability that came with the computer, which I bought at Best Buy. Based on IT advice I have made sure that WiMax is off but the wifi button indicates 'on.' When I am having problems though, I cannot see the wifi button.
I am using Windows Firewall and Webroot SecureAnywhere v.8.02.109. At device manager I see for network adapters: Intel(R) Centrino(R) WiMax 6150 and Intel(R)Centrino(R) WirelessN6150. There is also an entry above for a 6150 Function Driver.
I have attached an image of the ipconfig from the ASUS.
i have an Asus u56e that I recently bought a couple of moths ago. It has been a great computer until today when my wireless randomly disappeared for no reason. The wireless adapter has been disabled for no reason, and when I try to re-enable it, I can't seem to find it.
View 1 Replies View RelatedI've had trouble connecting to my own internet and have no wireless. I'm using my neighbor's wireless and it's really slowing her's down. I've tried restarting my laptop (it usually works) and then reinstalled the device under "device manager". It's not the cord, I've checked with my neighbor's laptop and it works fine.I use a Sony Vaio VGN-NS140E with Windows Vista SP2.
------------------------------------------------------------------------
{ipconfig /all} This is while I only have an ethernet plugged in and no wifi connection.
Windows IP Configuration
Host Name . . . . . . . . . . . . : FairyHo
[code]....
I have a Dell XPS M1530 with Vista 32 bit. When i plug in a cable i get nothing, no error, and the comp does not recognize that a cable has been plugged in. I think that this started after my Hard drive failed and Dell replaced it but i'm not positive. No errors (? or !) in Device Manager and I can't find the Marvell 88E80XX 10/100 Ethernet Controller in device manager. I have attempted to Reinstall the drivers. The wireless is still working. I have one Light to the right of the port that is on all the time solid but no flashing with the cable in or out.
View 14 Replies View RelatedThere is no "blinking light" indication on my E3000 at the Internet (Yellow label) and Ethernet port no 4. I tried plugging in 2 cables at all of the ports. I got the blinking indication at Port 1 through 3. The same cable's have no response at Port 4 and Internet port. As a result my I am not able to connect to the internet.
View 2 Replies View Relatedif I can use the encrypted port as unencrypted ethernet ports? url.. Each individual port on the Cisco Nexus 5010 switch is numbered, and groups of ports are numbered based on their function. The ports are numbered top to bottom and left to right.There are 20 to 28 ports on the Cisco Nexus 5010 switch, depending on which GEM is installed.
The 20 fixed ports form group 1 and are named 1/port_number. Ports 1 through 16 are unencrypted Ethernet ports. Of these, ports 1 through 8 are 10-Gigabit Ethernet and 1-Gigabit Ethernet-capable ports. Ports 17 through 20 are encryption-capable Ethernet ports.
I have a Cisco 857 router which i used for Internet connection with RJ11 connectior (ADSL0 POTS) but now the ISP has changed the internet link with PPOE type and the ONT connection is RJ45 , Is there a possibility to configure one os the Fast Ethernet ports as WAN port for internet.
View 2 Replies View RelatedNVIDIA is blocking my internet connecting on only one of my computers and it has become somewhat of an urgent situation. I need to know how to get rid of it immediately. I have no idea what NVIDIA is. I was using my computer and going on the internet without a problem and 3 hours later this issue came about.
View 2 Replies View RelatedI am currently having trouble with my NVIDIA nForce Networking Controller. Every morning when I turn on my computer, I have no network connections available, even though I am connected to a home network via Ethernet cable. In Device Manager, there is a yellow triangle with an "!" inside beside the following entries:NVIDIA nForce Networking Controller (of course)Standard Enhanced PCI to USB Host Controller
View 5 Replies View RelatedAfter getting the cable set up (some new wireless modem that comcast gave us) we were able to connect to the internet once, after putting in the password, but after that the next day our computer would not recognize any networks at all, it's just say no connections are available.I already:-restarted computer,-reset modem (we used to have a router and a cable modem but now only the wireless modem)-rolled-back drivers,-disabled then re-enable driver (did NOT uninstall or reinstall)-opened the computer up, take out the adapter, tryed and got the dust off-unscrewed and rescrewed antenna- tested a laptop, and it had an internet connection - and probably a few other things which I can't rememberLast time on the computer, I uninstalled a few things with revo, ran registry cleaner, browsed internet, and installed a new nvidia driver (after the problems arose). I was able to install a netgear wireless usb adapter (which is how I'm on the internet right now), but it frequently gitters and I can't use the NetGear for very long seeing as how a different computer uses it.
View 3 Replies View RelatedI have reinstalled XP on an older PC and have run Driver Reboot to check all the drivers are ok. So far so good, except - I cannot get onto the internet.... router etc is working... have reinstalled the nvidia nforce networking controller (as this kept coming up with errors). When trying to connect, error message is: limited or no connectivity.
View 5 Replies View RelatedI've recently reformatted an old hdd and i've installed windows xp professional on it and as usual the first thing that came to mind was to go on the internet to download all the drivers i needed. I ran into my first problem, apparently i can't access the internet because i don't have the driver that allows me to use the internet. I've downloaded the same driver that i had on the other hard drive, but it's just not doing anything, i can't create a Local Area Network in my connections. I'm on the same computer as said computer, except different hard drive. Don't have any of the cd's nor do i know which drivers were installed on this hard drive.
Here's some of my computer spec's:
Microsoft xp
CPU type: AMD athlon 64, 2000 MHz(10 x 200) 3000+
Motherboard Name: ECS nForce3-A(5PCI,1 AGP, 2 DDR DIMM, Audio, LAN)
Motherboard Chipset: nVidia nforce3 250, AMD Hammer
System Memory: 1024 MB
BIOS type: Award(09/16/05)
Network Adapter: NVIDIA nForce Network Controller - Packet Schedular Miniport
I cannot seem to locate a driver for the "Nvidia nforce networking controller." ALL information I can glean from the computer does not show anf further information or part numbers or numbers after "nForce".
HP dv6704nr Pavilion Entertainment PC
I have an HP Pavilion notebook that was given to me by a friend who had upgraded to a new computer. Due to the fact that she no longer remembered the password to the computer I did a clean install of Windows Vista Home Premium to gain access to the computer. Unfortunately, while the computer seems to be running perfectly, when I attempt to find network connections my computer not only can't find wireless connections, but it doesn't even allow the option of manually creating a wireless connection under my Internet options.My computer has a built in NVIDIA nforce Network controller listed under my network adapters and when I check its status it states that it is working properly, yet it doesn't detect any wireless networks. In addition to this, I've read online that the wireless indicator light on my computer should switch from orange to blue when turned on, but even with my wireless switched on the light remains orange.I've also clicked the update drivers option on the NVIDIA network controller, but it states that the drivers are current and changes nothing.
View 14 Replies View RelatedI have an Acer AX3400 (windows 7). I'm trying to install wireless router Netgear WNR3500v2. I did not succeed sofar. Do I have to uninstall NVIDIA drivers first?
View 1 Replies View RelatedI am trying to figure out what the lights on my Dell ethernet adaptor port mean.
View 1 Replies View RelatedA few days ago, my lappy crashs (Blue Screen) and when i managed to get the page showing, start windows normal mode, safe mode or last know good config, i select the last known good config, But when i get into the windows, i have these message on my network icon saying limited or no connectivity. I run ipconfig on cmd, and got all
0.0.0.0
i have seen some of the troubleshoot advice on other thread on ipconfig/release, flush and renew but it doesnt works i tried to reinstall my drivers, but still the same, There wasnt any ! on my device manager, and i have selected the internet protocol, IP address and DNS, Automatically but still, it doesnt works
I am quite a bit rusty from my days of networking. I am trying to setup my lab so I purchased 3 cisco 2501 to study for my CCNA, my question is? I have 2 serial interfaces and 1 AUI for ethernet on each router. How can I configure the Ethernet interface, if I don't see it on the configuration. From the CLI command I issue the command show ip int brief. But It only shows the 2 serials but no E0 interface.
PS. I do have an Ethernet Transceiver connected to the AUI port on the router with a straight through cable going into a 2950 switch.
Is it possible my Laptop Ethernet port is dead?After I got home today I noticed that the store that passed by caused a short power outage. I knew this because several electronic devices that rely on constant power were reset.Next to be noticed was that my computer had no connection to the internet, and my Ethernet port has a constant orange light on.I proceeded to perform a full network restart for my modem, router, and computer. This solved the internet connection to my router. My roommate was able to connect via an Ethernet cable to the internet on any of the routers ports, but I was still unable.However,I was able to connect to the wireless on my computer. Unfortunately no matter what port, or cable I use my Ethernet port still is unresponsive to it all, and still has the constant orange light.you.Specs:Manufacturer: Gateway
Model: P-78
OS: Windows 7
CPU/Ram: Intel(R) Core(TM) 2 Duo P7350 2 GHz / 4090 MB
Video Card: NVIDIA GeForce 9800M GTS
Sound Card: NVIDIA High Definition Audio Conexant High Definition SmartAudio 221
The green light on my Ethernet port is always on. Even when I unplug the Ethernet cable and shut down my computer. The only way it turns off is when I unplug my computer from the outlet. Also, my computer doesn't receive any internet when an Ethernet cable is plugged in and the yellow flashing light doesn't show either. I know the Ethernet cable is fine and the internet works fine on other computers
View 2 Replies View Related