Routers / Switches :: Linksys E3200 The Value Can't Be Equal

Aug 17, 2011

the value can't be equalI am setting up a e3200 linksys for a static ip address none of the IP addresses are the same. What am I missing?

View 1 Replies


ADVERTISEMENT

Cisco WAN :: Load Balance Between 2 3750 Switches With Equal-cost Paths

Jan 16, 2012

I have two offices in rural area with a quite distance between them. Offices are connected with private wireless 100Mbps and cooper 100Mbps links provided by different ISP. Wireless connections are delivered as a private L3 Ethernet link but cooper as private L2 Ethernet trunk link. In both offices I have Cisco 3750 L3 switches. I would like to use both link (equal-cost paths) in load balanced configuration but not sure how. Both switches running EIGRP. Asymmetric routing is not an option. Per-destination load-balancing or something else?

View 5 Replies View Related

Routers / Switches :: D-Link And Linksys Routers Plus Modem Connection

May 26, 2011

everything was all good, my brother went crazy and unplugged everything.it effects our house phone too, that could be the problem.i just dont know what wires went where. all the wires are the same color.but i know which is which. just again, dont know where.i would like to get it done before he gets home later on.

View 1 Replies View Related

Cisco WAN :: 6500 Traceroute Command Output For Routes With Equal Metrics

Aug 31, 2010

=>Routing Protocol in Question EIGRP.
=>Two equal metric routes for destination A(through R1 and R2-SVIs on two upstream 6500s)

Traceroute Output, is the output that alternates between 1.1=>10.1=>1.1 normal granted the two routes are "equal metric routes for the same routing procotol in use" or is that "round robin behavior" indicative of a routing problem?

View 11 Replies View Related

Cisco Switching/Routing :: 3750x Equal Functionality But Lower Model?

Apr 20, 2013

i'd like to know if there's a routed switch lower than 3750x?  also 2960s? but have equal functionality like switchport mode access, trunking, spanning-tree, etherchannel, etc.

View 2 Replies View Related

Cisco Switching/Routing :: 6500 VSS Architecture With Two Equal Cost Paths To A Destination?

Apr 29, 2012

I have a query on how the 6500s running in VSS mode would route the traffic over an OSPF environment where it has leant about two equal cost paths, but one via the 2nd chassis.Proposed setup - 2 6509s running in VSS. Switch-1 in VSS has a layer 3 connection (via a LES circuit) to one of a pair of Nexus 7Ks at another office. Switch-2 in the VSS has another layer 3 connection (via LES by another provider) to the other N7K at the other office. The L3 connections would use /30 ranges and allow each Nexus to form an ospf neighbour relationship with the VSS. We want to keep both offices environments separate so although we do have L2 circuits we're using these to provide L3 connectivity between sites & exchange routing info via them using ospf.

Each Nexus will advertise all the directly connected networks it knows about to the 6509s running in VSS. Thus I couldn't figure out if for example we have users/servers behind our VSS 6509s, these would need to go via their default gateway to get to a network located off the LAN, the default gw ip in VSS setup exisits on the control plane on switch-1 (in normal operation). Then to get to a network that is located off the Nexuses at the other site it would have 2 equal cost paths to it, however one of these paths would be via the VSL link and off the switch-2 chassis. I wasn't therefore sure if we'd actually ever see any transmit traffic via the 2nd L3 connection because I have a funny feeling that I've read the VSS always choses the local chassis egress rather than going via the VSL to use another port...
 
All of the above is theorectical at the moment as currently both circuits are connected to a single Nexus/6509 chassis however for improved resilence I want to move one of the circuits to be physically attached to the other Nexus & 6509 chasis at each site but I wasn't then sure how the traffic flows would be affected.

View 2 Replies View Related

Routers / Switches :: Linksys Can't Connect To 192.168.0.1?

Jan 26, 2011

I'm trying to access 192.168.0.1 to configure my linksys router to add new hardware to my home network but my browser (Safari) can not open the page - error message suggests 'server where this page is located isn't responding.

View 3 Replies View Related

Routers / Switches :: Can't Access Linksys With 192.168.1.1

Mar 29, 2013

I have windows 7 could this be the problem? it is unsecure and I have access the security part of it

View 1 Replies View Related

Routers / Switches :: Put Password For Linksys Router?

Apr 2, 2011

cannot get acess to router to put a password with 192.168.1.1 and my default gateway showing 2002:c058:6301::c058:6301

View 11 Replies View Related

Routers / Switches :: How To Find WPS On Linksys Router

Sep 13, 2012

how do i find the wps on my linksys router

View 4 Replies View Related

Routers / Switches :: How To Set Up Security For Linksys Router

Nov 29, 2012

I typed in my web browser 192.168.1.1 and comes up user name and password. after I type in Admin and admin kicks me back out to user name and password. I have reset the router per instructions and still doesn't work.

View 6 Replies View Related

Routers / Switches :: 192.168.1.1 Won't Find Linksys Router

Mar 21, 2011

I have Qwest router on 192.168.0.1 but my linksys router is hardwired to that router to provide a stronger signal throughout the house. I can't get to the 192.168.1.1 page through the internet. I need to configue the linksys router. Specifically to forward some ports to/for the XBox360 or at least make sure Upnp is enabled.

View 1 Replies View Related

Routers / Switches :: Cannot Connect To Internet With Linksys?

May 20, 2011

cannot connect when router is installed

View 1 Replies View Related

Routers / Switches :: LinkSys BEFW11S4 Add A Password But Don't Have The Set Up Disc?

May 31, 2011

I need to add a password but don't have the set up disc how can i set a password for it

View 1 Replies View Related

Routers / Switches :: Linksys WRT54GS Router Is Not Recognizing PC?

Mar 7, 2011

I have a Linksys WRT54GS router that is giving my some trouble. I recently got a new PC and moved my old one into my bedroom along with my Xbox 360. So I didn't have to switch my Ethernet cable between my xbox and pc I bought another cable. Much to my dismay this new cable would not work. At first I thought maybe the cable was bad, but when I connect my pc directly into my modem it works fine. This had my come to the conclusion that it was my router. I have two pcs hooked into it that work fine and a laptop that connects to it wirelessly, but if I try to hook my xbox or pc to it using the new cable they just act as if there isn't a cable connected. When I look at my router the light for the ethernet port that the new cable is in will flash on and off. I've hard reset my router and updated the firmware.

View 2 Replies View Related

Routers / Switches :: Linksys Wrt54g - IP Address Won't Pull Up?

Jun 16, 2011

I have a linksys router model#wrt54gt v1 and I can not pull up the router's ip address to change the security settings. I have checked and I have the correct IP address of 192.168.1.1. I can ping the router and everything hooked up to the router is now working correctly. I was having problem with the router losing the internet ip address and having to turn everything off and then back on to connect to the internet. I reset the router and it seems to have corrected that problem but I now can not pull up the router's ip address. I have tried in Internet Explorer and Firefox. I have tried typing thebefore the ip address but it will not pull up. I have read countless posts trying to trouble shoot and figure out what's wrong with it and nothing will work.

View 5 Replies View Related

Routers / Switches :: Port Forwarding On Linksys WRT54G?

Nov 11, 2011

Port forwarding on my linksys is not seem to be working from outside the network. It works fine if I try on the same network. External ip address: 69.117.132.xxx Ports from 8080 through 8080 forwarded Internal ip address: 192.168.1.150 - static ip address assigned to the webserver. I understand 80 could be blocked by the ISP. Can 8080 also be the same case?

View 12 Replies View Related

Routers / Switches :: Linksys Won't Bring Up Configuration Page

Feb 15, 2012

Linksys tried multiple WRT54g routers and access point, 192.168.1.1 can't open the router config page.

View 5 Replies View Related

Routers / Switches :: Can Ping But Can't Access Linksys Router 192.168.1.1

Feb 25, 2011

every time i try to acces my linksys router my IE just auto adds http:// and opens google search results. I cannot make IE not auto add that freaking http thing, on the old win XP i could type in 192.168.1.1 and it just went straight to my router login. Do i disable this IE auto http crap? i simply cannot acces my router anymore??i can ping the router, even using Cisco network magic pro I tried to reset router checked my internet settings everything works fine, this pc has a dhcp auto configuration etc.

View 9 Replies View Related

Routers / Switches :: Linksys Wrt120n Router Keeps Losing Internet?

Apr 12, 2011

ive been having a problem with my router since ive been using it for its wireless capabilities. it is a linksys wrt120n router. our internet comes from our local cable provider and it is good internet (10Mb download speed). running to our old router that split the connection between my xbox and our desktop computer worked fine and even for a large amout of time after i switched to this wrt120n there were no internet problems. now all of a sudden the router drops connection multiple times a day which can become a hassle when i'm doing something importaant and lose connection. and just a little bit of extra information i cycle the systems every time it does it and theres no fix.

View 1 Replies View Related

Routers / Switches :: Linksys Router Only Connecting To Internet With One Computer

Jul 6, 2012

After a power failure nothing could connect to the internet anymore. I called MTS (ISP provider) and they had me change some setup on my PC. Now my PC connects to the internet, but nothing else will connect (X Box, WII, iPods, Laptop). They were connected wireless before the power outage through my router. MTS said they are only responsible for ensuring their model works, not routers.I have checked some router settings. It is set for DHCP with 50 users.

View 15 Replies View Related

Routers / Switches :: Linksys E3000 Router Will Not Forward Port 443

Dec 20, 2011

I attached an Iomego Home Media network hard drive to my Linksys E3000 router (via ethernet cable). Before setting up the remote access on the Iomega, I forwarded the ports that it wanted (443 and 21) to the static IP of the Iomega. I checked to see that they were open using yougetsignal.com and they were both open. After setting up the remote access on the Iomega, the 443 port closed and I cant even get into the "manage storage device" page for the Iomega. Iomega uses TZo for the domain names. They tell me that the association is made between the name and my public IP address. My router is out of warranty since Sept, so Linksys wont give me the time of day. I contacted my ISP and while they block a couple of ports, 443 is not one of them.I've installed the latest firmware (1.0.04 - Build 6). Reset and rebooted numerous times, Port 443 remains closed.

View 8 Replies View Related

Routers / Switches :: How To Put Linksys Befw11s4 Router Into Bridge Mode

Jan 27, 2012

My ISP insists that in order for me to have a home network use their router/modem ("2-Wire") for internet access, I must make my own network router act as a bridge since their modem is acting as the router. I.e. she said put your router into bridge mode. I don't know how to do that and Linksys won't offer assistance.

View 6 Replies View Related

Routers / Switches :: Linksys E1000 Wifi N Router Setup Without Cd?

Apr 19, 2011

The router was working fine when it was setup but was disconnected for a short while. There is now no recognition of the router and the install cd was misplaced...

View 2 Replies View Related

Routers / Switches :: WRT54GS Linksys - Why Does Err 0x80040900 Show Up Sometimes When Tx / Rx Email

Feb 6, 2012

Why does err 0x80040900 show up sometimes when tx/rx email? I use a WRT54GS linksys router. I have more than one computer which use Microsoft Outlook 2003 to check email accounts. When the error shows up I can ping the server no problem. The error sometimes goes away and comes back randomly.

View 2 Replies View Related

Routers / Switches :: Linksys WRT54GS Doesn't Work With Password?

Mar 5, 2011

I have a linksys wrt54gs wireless router (working fine since last 3 years) which connects to the internet fine if there is no password set. However if i set WEP password to protect the wireless connection, i am not able to connect to the wireless connection. Everytime i enter the passphrase, when trying to connect to the wireless network, it refuses to accept the password. I have tried this with 2 laptops (both running windows 7) and both have same issue.

View 2 Replies View Related

Routers / Switches :: HP C6180 Printer Does Not Print Using Linksys E2000?

Jan 6, 2011

Our office is set up with one desk top and at least two (occasional) laptops, one HP C6180 'all-in-one ' printer, and a Cisco Linksys E2000 router. Internet access for all computers seems OK, but printer seems to only print from one computer, and is inconsistant as to which one it will be. Have tried to shut down then restart printer. Have tried to disconnect and reconnect router, sometimes works, sometimes doesn't.

View 1 Replies View Related

Routers / Switches :: Newer Router CISCO Linksys WRT310N Not Connecting?

Apr 11, 2011

A newer router that I got from a friend, a CISCO Linksys WRT310N, is not connecting to my XP computer via a CAT5e cable. It willconnect for about 5 to15 mins, then lose connectivity. Ihaven't tried with a faster CAT6, since my dog chewed through my other one,and I have yet to get a new one. I used an older NETGEAR B/G router and it worked fine.

View 10 Replies View Related

Routers / Switches :: Secure Linksys Router So Only Laptop / Desktop And IPad Can Use It?

Jul 8, 2011

How to secure router on my mac - neighbor tapping into my internet service. How do I secure my Linksys router so only my laptop, desktop and iPad can use it? I tried going to 192.168.1.1 but got nothing?

View 5 Replies View Related

Routers / Switches :: Set Up Linksys Wtr54G Wireless Router In Dorm Room

Jan 26, 2011

How do I set up the linksys wtr54G wireless router in the dorm room. When I try setting it up, I can only access the router set-up main page which is 192.168.1.1 then icon status shows that it sends out packets, but my computer doesn't receive any signal or (bytes). So, could it be that there are university restrictions on routers/dorm-room internet? How can I get it to work? I heard I need to set up an access point.

View 1 Replies View Related

Routers / Switches :: Cannot Connect Cisco Linksys ADSL2+Wireless Router?

Sep 2, 2011

I recently took a cisco linksys ADSL2+Wireless router, it has a DSL pin for internet connection (which is four pin, i.e. RJ11 connector) but i have a cable net, it has an 8 pin connector i.e. RJ 45

View 4 Replies View Related

Routers / Switches :: Wireless Network Setup - Configuring Linksys Router

Sep 18, 2011

I am following instructions I found to set up my wirelss network, but am having trouble configuring my router. I'm specifically at a standstill, because I can't connect to http://192.168.1.1. I pinged the router and got a response and went to run/ip config to confirm I have the right URL for the router, but still not able to get to the URL.

View 1 Replies View Related

Routers / Switches :: Linksys WRT110 Laptops Won't Recognize Wireless Network

Jun 18, 2011

I have a Linksys WRT110 wireless router that has never given me any problem. All of the sudden, after a storm blew through yesterday, none of the laptops in my house (PC running Vista and Mac) will recognize my wireless network. I have a desktop computer and BluRay player hardwired to the router and the internet works fine on them through the router.The problem is not that I can't connect or lose connection, the wireless network isn't showing up as existing anymore, like it has disappeared.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved