Why does err 0x80040900 show up sometimes when tx/rx email? I use a WRT54GS linksys router. I have more than one computer which use Microsoft Outlook 2003 to check email accounts. When the error shows up I can ping the server no problem. The error sometimes goes away and comes back randomly.
View 2 RepliesI have a Linksys WRT54GS router that is giving my some trouble. I recently got a new PC and moved my old one into my bedroom along with my Xbox 360. So I didn't have to switch my Ethernet cable between my xbox and pc I bought another cable. Much to my dismay this new cable would not work. At first I thought maybe the cable was bad, but when I connect my pc directly into my modem it works fine. This had my come to the conclusion that it was my router. I have two pcs hooked into it that work fine and a laptop that connects to it wirelessly, but if I try to hook my xbox or pc to it using the new cable they just act as if there isn't a cable connected. When I look at my router the light for the ethernet port that the new cable is in will flash on and off. I've hard reset my router and updated the firmware.
View 2 Replies View RelatedI have a linksys wrt54gs wireless router (working fine since last 3 years) which connects to the internet fine if there is no password set. However if i set WEP password to protect the wireless connection, i am not able to connect to the wireless connection. Everytime i enter the passphrase, when trying to connect to the wireless network, it refuses to accept the password. I have tried this with 2 laptops (both running windows 7) and both have same issue.
View 2 Replies View RelatedSigned onto pc as admin, logged into router with correct user name and password. No page in the browser based configuration displays the complete information for the page. Menus are missing as are option labels, etc. The last time I accessed the router (about a year ago) I didn't have this problem.
View 3 Replies View RelatedNo School havn't own email server, Just we want email within the Lab. (There are 20 PCs on all PCs Windows XP (Service Pack 2) & MS Office 2003 installed.Now tell me how can we send/receive email via using outlook.
View 1 Replies View RelatedI am unable to connect to the internet thru my router, Lynksys WRT54Gs. The network worked fine before I went on vacation. I accessed the internet by connecting the ethernet directly to the modem, and have been unsuccessful at my attempts to reset the router with 192.168.1.1
View 1 Replies View RelatedI got the Cat-5e network cable but I cant get it to show up, when I plug it in I cant seem to get it to show up on my computers.
View 4 Replies View Relatedipconfig /all reports one of my three DNS servers as 192.168.1.1. My Default Gateway and DHCP Server are also reported as 192.168.1.1. This is from a recently installed Valet M10 updating an old Linksys router. The Linksys reported the three DNS servers octets independent of the router's ip and other default settings.JK
View 1 Replies View RelatedI have been having a lot of trouble lately with my wireless network. Basically, under certain situations it will constantly drop out, by which I mean all computers will lose connection with the wireless network for about 30 seconds and then reconnect.This is happening with two different wireless routers so I don't exactly know what is happening. I usually use a Linksys WRT54GS v7 but after this started happening I borrowed a friend's Linksys WRT54G2 v1 router to test it out with no change. I also updated both router's firmware last week, and changed both router's channels to 1 in case that was a part of the problem. To clarify,only one router is being used at a time, I have just tried different steps with each one.The other day when it was happening repeatedly, I connected one of the computers directly to the modem and had no problems so I do not think it has anything to do with my modem. On the network, depending on the time of day, there will be any combination of three macbooks running the latest version of snow leopard and one older PC running Windows XP. The network can drop out with only the PC, no PC, or any combo of macs. There can also be two iPhones and a Blackberry using the wireless depending on who is home. The most consistent problems seem to occur whenever something is being uploaded. We seem to get major issues when my wife is sending relatively large files (5MB+) using her macbook's mail program (either sending through gmail or her work address). However, yesterday it was happening every 30 seconds when someone was talking on skype on her macbook while there were two other macbooks connected to the network but doing nothing more than using a browser for basics like google.I have also noticed that this will often happen, though usually only once rather than repeatedly, when a computer that hasn't been on is turned on.
View 19 Replies View RelatedI have a Linksys WRT54GS wireless router (10.77.79.1, 255.255.255.0) which hands-out DHCP addresses to my wireless/wired clients. This router is connected to the cable modem which then connects to the wonderful World Wide Web. Port 1 of this router is connected to a Cisco SG200-8 Small Business Switch (10.77.79.3, 255.255.255.0). My Dell 2950 is then connected to the SG200-8.
I would like to segment my lab environment (Dell 2950) using a 192.168.10.X scheme, so I configured a static route in the WRT54GS using these settings:
Dest. IP: 192.168.10.0
Mask: 255.255.255.0
Gateway: 10.77.79.3
Here is my IP information for the SG200-8:
IP: 10.77.79.3
Mask: 255.255.255.0
Gateway: 10.77.79.1
I know I'm doing something wrong because I cannot ping any of the 192.168.10.X IP addresses from the 10.77.79.X network, and vice-verse. All VLANs on the SG200-8 are set at their defaults (1 and Trunk?).
Are there any additional configuration steps I need to perform in the SG200-8 or WRT54G? Is what I want to do even possible with my hardware?
everything was all good, my brother went crazy and unplugged everything.it effects our house phone too, that could be the problem.i just dont know what wires went where. all the wires are the same color.but i know which is which. just again, dont know where.i would like to get it done before he gets home later on.
View 1 Replies View RelatedI have a question about NAT behavior on FWSM 4.0. The problem is email server (Company A) cannot connect to email gateway (Company B) on the outside network and it randomly happen. I got this error from server guy "Detail: xlate has blocked the connection between A’s mail gateway and B’s mail gateway". It work fine again after clear xlate on firewall. [code]
1. How FWSM create xlate table like that? I mean it look like NAT0 for 158.137.21.26 but it doesn't has any nat rule for 158.137.21.26 on firewall.
2. What does it mean "connections 24" at the first of line? In the normal time, I only see the connections is 0 like the second line of xlate
3. After clear xlate global 158.137.21.26, the first line of xlate table is gone then email server can connect each other. Does is a bug on FWSM? or This is a normal NAT behavior of FWSM.
I deleted an incoming email titled troy from my email inbox by mistake I need to recover this email as it came from my son in bali [URL] edited by moderator: Deleted Email address to prevent Spam
View 1 Replies View RelatedI do you not think the RV220W needs to have better E-mail support that the feature it supports at present?No SSL support at all. The only setting for authentication is: Login Plain or CRAM-MD5. Every mail server I use now, supports SSL as the default authentication and not CRAM or Plain, this makes the E-mail feature useless. [code]
View 1 Replies View RelatedI am trying to setup logging on my router. I want to use my gmail account / gmail SMTP server to send emails.
Does the router support TLS for SMTP?
Oh - and I also get the "critical error" page. I get it when I try to un-check the send logs checkbox in the remote logging management page.
We currently have the XG1 through XG4 ports on our SG500X switch setup in a LAG with the Cisco 10G-FiberOptics. Everything is working fine,however in the web UI under Port Management->Port Settings the "Port Speed" is listed as Unknown. All other ports report the speed correctly. We have 2 SG500X switches configured this way and both are reporting the same Uknown speed.
Firmware Version (Active Image): 1.2.7.76 Firmware Version (Non-active): 1.2.0.97
Running the newest firmware available
$ show version
SW version 1.1.2.0 ( date 12-Nov-2011 time 23:34:26 )
Boot version 1.0.0.4 ( date 08-Apr-2010 time 16:37:57 )
HW version V01
This is how I can cause the reboot to happen every time.
$ show lldp neighbors GE 10
Device ID: <mac address>
Port ID: 22
Capabilities: Bridge
[Code]....
I'd like to know if there's a command I can run to turn off paging on my SF302 switch. So for example, when I run the "show logging" command on the CLI, I'd like to it return all the results instead of prompting me to hit space bar or enter.
View 3 Replies View RelatedI just purchased a Cisco SF 102-24 unmanaged 100 series swith with a MGBSX1 mini-Gbic converter. My goal is to connect this to a building that is connected with a Black Box LH1706A-ST media converter that has 100mb ST fiber connections. In my testing the Black Box shows both a Fiber link and RJ45 port link at 100mb, but the MGBSX1 does not show any link lights or traffic. So a computer connected to the Cisco switch is not able to communicate over the fiber connection.
Can the MGBSX1 be connected to a media converter that only has 10/100 ST fiber connectors?
Where/how do we setup an SRP527W to send email notifications? Can't seem to locate the setting when logged in as admin.
View 1 Replies View RelatedI have a stack of 8 3750x switches connected via Stackwise. In addition, I have these switches configured as two Powerstacks. When I look at the Powerstacks, they are showing as being in power-sharing mode. When I look at the individual switches, they show as standalone. Right now, I have 1 switch in each powerstack that has two power supplies, and then the other three have a single power supply. Below is the output for "Show stack-power detail" as well as the Powerstack configurations.
Power Stack Stack Stack Total Rsvd Alloc Unused Num NumName Mode Topolgy Pwr(W) Pwr(W) Pwr(W) Pwr(W) SW PS-------------------- ------ ------- ------ ------ ------ ------ --- ---Powerstack_1 SP-PS Ring 2145 45 570 1530 3 3Powerstack_2 SP-PS Ring 2860 60 760 2040 4 4Powerstack_1-1 SP-PS Stndaln 1430 520 190 720 1 2
Power stack name: Powerstack_1 Stack mode: Power sharing Stack topology: Ring Switch 4: Power budget: 700 Power allocated: 190 Low port priority value: 20 High port
[code].....
I'm setting up a new SF-300-08 with SNMP.I have defined Groups OK.But, when I go to Add User, the Group pulldown is grayed out and I can't add a user.
View 1 Replies View RelatedJust installed a RV042 with dual wan connections. Would like to make the WAN 2 (new cable modem as well) the primary connection over WAN1 (DSL), however whenever I switch from WAN1 to WAN2 in Smark Link set up, our email server will not send mail out, even though nothing is blocking the connection.
View 0 Replies View RelatedYesterday, I installed the N450 DB and it was probably the easiest install I've ever had to do. One problem though, I can now no longer send or receive email thru Outlook Express 6. Keep getting this message 'The host 'mail' could not be found. Please verify that you have entered the server name correctly. Account: 'mail', Server: 'mail', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 11001, Error Number: 0x800CCC0D'.
View 3 Replies View RelatedI'm trying to connect my Alvarion BreezeMax Si modem to my Wrt54gs Router, how do I do that.
View 1 Replies View RelatedI'm trying to access 192.168.0.1 to configure my linksys router to add new hardware to my home network but my browser (Safari) can not open the page - error message suggests 'server where this page is located isn't responding.
View 3 Replies View RelatedI have windows 7 could this be the problem? it is unsecure and I have access the security part of it
View 1 Replies View RelatedIs there a chart to show what modules will fit what swithches for fiber applications ex 2950 and 3560 switches
View 1 Replies View Relatedcannot get acess to router to put a password with 192.168.1.1 and my default gateway showing 2002:c058:6301::c058:6301
View 11 Replies View Relatedhow do i find the wps on my linksys router
View 4 Replies View Relatedthe value can't be equalI am setting up a e3200 linksys for a static ip address none of the IP addresses are the same. What am I missing?
View 1 Replies View RelatedI typed in my web browser 192.168.1.1 and comes up user name and password. after I type in Admin and admin kicks me back out to user name and password. I have reset the router per instructions and still doesn't work.
View 6 Replies View RelatedI have Qwest router on 192.168.0.1 but my linksys router is hardwired to that router to provide a stronger signal throughout the house. I can't get to the 192.168.1.1 page through the internet. I need to configue the linksys router. Specifically to forward some ports to/for the XBox360 or at least make sure Upnp is enabled.
View 1 Replies View Related