Just got virgin internet installed in my uni house, found out that my room is the only one that doesn't get any wireless signal. So to sort this out i bought a homeplug, plugged it in by the new virgin super hub and one in my room. This works perfectly fine, but im limited by the ethernet cable, so i thought i would plug in my old dlink wireless router to see if i could make my own wireless network just for my room. I could connect to it but just cant get any internet. Ive tried making the IP adress's static and using the following settings on both:
What Happens if I Used 2 to 4 more wireless routers acting as Main Routers in my network? that their DHCP are enabled? would it cause connection Disturbance? I Have 4 Cisco Linksys E300 all of thier DHCP are enabled..so they have 192.168.2.1,192. 168. 3.1, 192.168.4.1, 192.168.5.1
I am on the Verizon wireless router connected to my laptop and the xbox wired to laptop. I have another wireless router that i want to connect because the main router is in the basement I am on the second floor. How do I connect the xbox to the 2nd router wired?
One moment the laptop was using the wireless connection from the router in our house and the next it lost internet access and then wasn't able to recognize the SSID or connection at all on the available wireless connections. We have reset the router and restarted the laptop countless times yet the only internet access we have is on the computer the router is hooked up to.The wireless connection works neither on the laptop nor the Wii, both previously works merely hours ago and with no problems until now.We assume there is an issue with the router itself, whether it be a loose ethernet cord (which only faintly can be moved in its place).It's almost as if the router is stopping them (Wii, and laptop) from having access. When we explore the wireless internet properties on the laptop, it shows the wireless connection, yet only there and doesn't give access to it. Could it be the router, or could the company have restricted WiFi only to the computer it is hooked up to?
I am trying to setup to wireless routers onto one network. One router is the ES4500 the other is the Apple Time Capsule. The apartment I am in has thick walls and because of this, there are some wifi gaps. Trying to set the second router in a different room to act as a wireless bridge/access point for the first router.
I am currently playing Football manager 2011 with a friend via a network game. The game will work perfectly if I connect my Laptop to the modem directly and bypass the Wireless. However if I try to play the game while connected to the wireless then my friend is unable to connect to the game. This is becoming an issue as for me to be able to play the game I have to turn the wireless off which is getting on the nerves of other family members
i have 3 home computers using the same wireless router. 2 of them have no problems detecting and accessing internet. one computer can access at times, but many times cannot detect network. i have tried restarting my modem, the router, my computer etc. at times, it works, at times it doesn't. at times, it is ok, at other times it is not.
I have the modem feeding a router that I turned dhcp off to use it as a switch, I then have the switch feeding a ubiquiti nanostation and a wireless router (to feed house 1). The other end of the nanostation is in house 2 (1000ft away) where I have it feeding into another wireless router to feed that home hard wired and wireless.Everything works but cannot get both to work at same time.
I have 2 Linksys WRT54G laying around. Is it possible to connect from Cable Modem – D-Link wireless N router – 4 port switch – Linksys Wireless G router?The reason is that my office is in the back of the house and I have a network cable running from outside to the front of the house. The wireless N doesn’t give signal to the front of the house. I want to have wireless for the tablets and the android phones.
I just bought a sony vaio laptop and I can't connect to the wireless network, it appears back and forward a message saying that the adapter is not found and then it says it is working and then it is not found again and so no.. Tried to connect the laptop using the WPS button but it did not work either.
Now, I am using USR9111 as the primary router. But, it not enough to provide network for the whole area. So, I have planned to add another router to this wireless network.
I have 2 wireless routers with me. (Linksys WAG200G & USR 9111). Now, I am using USR9111 as the primary router. But, it not enough to provide network for the whole area. So, I have planned to add another router to this wireless network. Is it possible?
I have the D-link dir-655 wireless router connected at my cable modem and i HAD a d'link switch patched in about 40 feet away. The switch died after 45 days.To solve the problem and extend my network I purchased an identicaldir-655 router to replace the switch. My thought was that i would configure both routers the same and be able to use the same network settings to access the network throughout my house.It didn't work.I even tried changing the IP address on the second router but it did something to the modem. After resetting everything, the original router works again. D'link support says what i am trying cannot be done, but i know it can.
I have a Linksys WRT54GL router in one building and a second router in an adjacent building. I have connected each router to a MODEM that takes me to the internet. Can I configure the two routers to talk to each other and at the same time maintaining their respective internet connections
my goal is to share my cable modem signal over my two story house using two wireless routers. The delima is that the routers don't support wireless bridging and if they did, the signal is too weak to make it worth while.
The remedy I came up with... buy a pair of powerline network adapters and connect one router to the other so I could have a good signal upstairs and then a good signal downstairs.
Downstairs, I have the cable modem connected to the Linksys WRT54G router, which has a line out to my blu ray player, wirelessly feeds a PC downstairs and then has a cable run to the powerline adapter.
Upstairs, I have a cat5 connecting the powerline adapter (which was tested and works with laptop) to the data input port on my second wireless router, the netgear wndr3400.
I can't get the netgear upstairs to pull an IP address from the linksys router downstairs over the powerline network.
I need trouble-shooting wireless network connectivity issues that arose recently:We use a Comcast modem and two WRVS4400N's as wireless routers/wireless access points.We recently got our comcast service upgraded to 100/20 and also got rid of our static ip address. As a result (I think there must be a sort of causal relationship here, but I'm not sure what it is) we can no longer connect to the internet using our wireless networks. We can connect to the wireless network, but have "No Internet Access."
I have one cisco 2851 router and one watchguare firewal currently being used as the main router. I want to connect the cisco as a secondary router on the same network.
Add wireless conection that can't see network. I have an existing working hard wired network. I want to add a wireless connection that has access to the internet, but not to the other devices on the original network.
I am using the RV220W with the latest firmware, I disabled all the four APs and also disabled the Radio, but the "Wireless" green light on the front panel still ON, why? How can I completely turn off the wireless?
Quoted from manual: WIRELESS—The Wireless light is green when the wireless module is enabled. The light is off when the wireless module is disabled.
Moreover I tried to disable the "Radio" while enabled one AP, I found that I can still connect to that AP, so what is the Radio's Enable/Disable used for?
I am following instructions I found to set up my wirelss network, but am having trouble configuring my router. I'm specifically at a standstill, because I can't connect to http://192.168.1.1. I pinged the router and got a response and went to run/ip config to confirm I have the right URL for the router, but still not able to get to the URL.
I have a Linksys WRT110 wireless router that has never given me any problem. All of the sudden, after a storm blew through yesterday, none of the laptops in my house (PC running Vista and Mac) will recognize my wireless network. I have a desktop computer and BluRay player hardwired to the router and the internet works fine on them through the router.The problem is not that I can't connect or lose connection, the wireless network isn't showing up as existing anymore, like it has disappeared.
1. Green Packet DX-230 WiMAX modem with router 2. D-Link DIR-615 ver G2 (from my ISP) 3. D-Link 8 port desktop switch
I previously used the DIR-615 with my high speed broadband connection. However I had to move to a new house and here I can only get WiMAX. I want to...Place the WiMAX modem upstairs to serve as modem and wireless access point Have the DIR-615 function as the main router and firewall (downstairs) Use the switch to connect all the rooms in my house FYI my WiMAX modem has no connection configurations. I just plug it in and it'll connect automatically to the WiMAX signal. It has 2 LAN ports but no WAN port. From my understanding of networking, I have to turn off DHCP on my WiMAX modem, put it in the same IP range as my DIR-615 (192.168.0.100-199), and disable UPNP and NATPMP. After this I'm stuck.How do I tell my DIR-615 to use the WiMAX modem as it's WAN connection?Should I reserve an IP for the modem in my DIR-615?
i have issue for Remote App to connect to the Apple TV using the Wireless network setup in my 180W.My wired Mac is able to connect to wireless connected Apple TV but my i phone (4, 4S and i Pad) are not able to connect to apple TV.
Do I have to enable some setting for this to work. It used to work in my very old Buffalo router with tomato firmware.
If I connect the Apple TV to wired network it works fine. Instantly it shows up in i Phone Remote app, but not if its on wireless network.
Is there any way to disable router devices from connecting to your network? For example I want people to connect ethernet cables to their laptops, ps3s, pcs, etc but not to routers. How would one go about doing that?
I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
Due to bandwith requirements, we need to join a network with a RV016 to a network with an RV082 via a point to point air bridge. (VPN over adls was not cutting it) fortunatelly there is line of sight.
The info LocationA LocationB RV016 RV082 WAN1 ADSL modem WAN1 ADSL Modem WAN2 DedicatedIP modem WAN2 Free WAN3..7 free
[code]....
We need LAN-B endpoints to be able to reach servers on location A and viceversa.
We pre configured two point to point radios for the tower people to install. (we could change this configs)
Topology (crude sketch)[URL]
Our questions: best port to plug the radios into the RVs WAN ports? switch ports? What rules or static routes need to be created?
Probably a really dumb question, but networking is the one area of computing about which I am clueless. We have two desktop PC's (on different floors) that are currently networked via a hardwired router. We wanted wireless but at the time it was installed, the technician said it would not work because there is a metal floor separating the two (because one room is partially under the garage). The internet hook-up comes into the basement pc; I would like to have wireless at least on the main floor. My first question: has wireless improved sufficiently that I can connect two or three pc's that are a considerable distance and a metal floor apart? If not, can I add a second, wireless, router on the main floor. FYI, at the moment we are dealing with three different operating systems: Windows 7 in the basment, XP on the main floor; Vista on the laptop ... although we will probably be all "7" fairly soon.
in my office we are using 2 Wifi Routers in a same network and Routers have, same IP address. eig: Router A-192.168.1.1 & Router B-192.168.1.1, in same network. its working but same time its not working. * 2 Routers in same IP and same Network we can use ? * IP need to change ? * or same IP will work Hardware issue only ?
If your wireless indicator is flashing red when you discover the smurf, it can mean that someone has tried to logon with an incorrect password. this is not necessarily an attack, it could be someone you have allowed access too, who has forgotten the password? In this case entering the correct password will solve the problem.However putting your own MAC address into the filter will simply block your own machine.
I needed to set my router's firewall from medium to low. I was ecstatic about this until I came across another problem. I noticed that when I connected my ps3 (wired) to my Motorola modem it showed that I was on a NAT3 connection.Explanation of NAT types for PS3
Type 1 - Connected directly to the internet (no router/firewall). Should have no issues.
Type 2 - Connected through a router properly. Should have no issues.
Type 3 - Connected through a router without open ports or DMZ setup for PS3. Everything should function properly, but you may have connection, voice chat or other issues
I tried forwarding my ports for the PS3 to no avail. I also read about DMZ/IP passthrough and that didn't work either. Thinking that it had something to do with my ISP again, I called them up only to speak to a complete asshole saying I was too stupid to understand anything I was trying to do. He said I should bridge my MOTOROLA modem, but with bridging I lose WiFi don't I? I haven't tried this method yet, but if it works then I would like to have my WiFi still available to me.The Linksys router, which I want to serve as a wireless point is this one. The Linksys router is not connected yet, but after I connect it I would like to use the MOTOROLA modem/router strictly as a modem with nothing else connected to it. Is that the best way to go? Will I experience a bit of drop in speed if my desktop and my ps3 were connected to my Linksys? I want the wireless to use on my phones and laptops that I own.tl;dr. 2 routers 1 isp. 2nd router to use as wifi and connect desktop and ps3 to it while achieving open ports for gaming and torrent downloads?
