Linksys Wrt54G Reboots Automatically At 10PM Everyday?
Oct 20, 2011my linksys wrt54G reboots automatically at 10 PM every day. I want to change the scheduled reboot time to 2 AM each day. How do I do this?
View 5 Replies
ADVERTISEMENT
Cisco Switching/Routing :: 4507 Switch Reboots Automatically?
Mar 19, 2012working first time on switch 4507 , this is my 2nd week and i plug the console on this 4507 switch , the switch reboots automatically it comes to stage mention below and reboots. My question is i have not seen any error message on this switch and it reboots automatically so what is the problem.
* *
* Welcome to Rom Monitor for WS-X4013+ System. *
* Copyright (c) 1999-2003 by Cisco Systems, Inc. *
* All rights reserved. *
* *
**********************************************************
Rom Monitor Program Version 12.1(20r)EW1
Supervisor: WS-X4013+ Chassis: WS-C4507
[code]...
Linksys Wireless Router :: WRT54G Signal Frequently Disconnects Then Recovers Automatically
Jul 31, 2012I have a LinkSys WRT54G Wireless-G Broadband Router located in my basement office. My IBM T42 ThinkPad running Windows XP Pro has an Intel(R) PRO Wireless 2200BG Network Connection adaptor. The signal strength on the main floor of our townhouse is ~ 80%. My problem is the signal frequently disconnects then recovers automatically causing frustration when browsing the internet. My question: Should I upgrade to a new Wireless N router OR purchase a WiFi Range Extender? since my laptop has a Wireless-G adaptor would a Wireless-N router provide a stronger signal?
View 4 Replies View RelatedBeetel 220BX Modem Gets Hacked Everyday Despite Of Changing Password
Jan 27, 2012I am in a problem, my modem gets hacked everyday, such that many of the sites do not open and only "http://212.113.36.83/" opens instead of sites like yahho.com, sify.com. I checked on internet many people are facing such issue.Only thing I can do to resolve this is to reset my modem, but still this gets hacked even on changing my password.I am not able to understand how is it possible to modify the settings of modem when I have changed the password.Modem Model: Beetel 220BX.
View 5 Replies View RelatedLinksys Cable / DSL :: WAG160N Reboots Every 4 Seconds
Jan 7, 2012My Linksys WAG160N has worked fine for 2 years however all of a sudden when I power it up it's start normal but after 4 seconds all ethernet lights blink one time and all start from the beginning, it's like it reboot every four seconds.It happens so quick I can't even get to the Internet/Network Settings in WIndows Control Panel.I have tried accessing router setup and installing firmware and both have failed - it can not find the network address.If I try to reset with the reset button on the rear (30sec reset), it stops rebooting and the power LED starts to blink red/green and the ethernet LED of the port where my cable is connected starts to blink alsoI have set IP address manually on my computer as per the Cisco support pages (192.168.1.1), still no response from ping.I have also tried to reinstall firmware using TFTP but it also fails because it can not find the network address.
View 9 Replies View RelatedLinksys Wireless Router :: EA6500 Reboots Every Few Hours
Nov 4, 2012I got my new comcast connection and using CISCO DPC3008 cable modem and EA6500 Wifi Smart Router. Internet works fine and then suddently the internet goes away. Further investigation shows EA6500 Wifi router just reboots every few hours and then wifi devices don't reconnect like it used to do with previous routers.
View 6 Replies View RelatedLinksys Wireless Router :: WRT400n Reboots Every Few Minutes
Jul 2, 2011Check to see if there is a firmware upgrade and there is. Well I updated it with the newest and only one out there. I did the upgrade, said sucessful and now it will just random reboot or something........ every few minutes the power light starts flashing....... then all the light go out, then power flashes again and it comes back up. I have tried many times to reflash it with that new firmware but no avail. I wish I had the old firmware back because it was working fine till I did this upgrade.
View 5 Replies View RelatedLinksys Wireless Router :: WRT54G2 - Airplay Reboots It
Dec 22, 2011I have an issue when I use Airplay through my iPhone4S, my router reboots after 30 secs or so. I have a WRT54G2 v1.5 and the receiver is a Pioneer VSX-1021-K.
However, when I used Airplay through itunes from my laptop, it works just fine. In addition, when I borrowed my neighbors router's(BELKIN) it was working fine also. So this lead me to believe that it's my router that is causing the issue.
Linksys Wireless Router :: E2500 Reboots At Random Occasions?
Jan 1, 2013I have a E2500 router that until recently has been working fine, the router currently will reboot at random occasions. I have tried resetting the router to factory defaults to test if the firmware was an issue but both the factory default and the most recent firmware build(1.0.05 build 2) offered on the download support page. I have tried 2 different AC adapters to test power and two different Cat5 cables so hard ware wise everything is looking good. I am concerned that it may be an issue still with firmware or with the cooling fan and the unit may be overheating.
View 1 Replies View RelatedLinksys Cable / DSL :: WAG320N Web Interface Crashes / Reboots Router?
Dec 22, 2011My WAG320N has developed a fault where by after 1, 2, maybe 3 clicks on the web interface and the router reboots. The browser can no longer connect until it is closed and reopened (firefox). Firmware is: v1.00.12
Interestingly, if I use a different browser it doesn't seem to reboot and I can click away for ever. However, firefox reproduces the problem every time. FIrefox version is 7.0.1
Linksys Wireless Router :: WRT160N Requires Regular Reboots?
Jul 25, 2012So I have a WRT160N firmware v3.0 wired connection to my PC, and at least once a day my connection speed drops from 2mbs down to almost dial up speeds at 60kps. Just unplugging the router then plugging it back in seems to fix it every time. I've contacted my service provider and they say there's no issue on their end, and since I don't get this problem when I plug the modem directly to the PC I agree with them. I've done a factory reset and that didn't work. I've gone through the FAQ and can't find anything useful in there.
View 7 Replies View RelatedLinksys Wireless Router :: E4200v2 Frequent Lockups And Reboots?
Dec 25, 2011New E4200v2 router, latest 2.0.26 firmware. Reboots on its own <or> locks up and requires power recycle 3-4 times a day. More frequent if I attach a USB drive to USB port. Reset to factory, only using as a router (no USB drive, no printer sharing, no TimeMachine backups, etc.)Still locks up or reboots 3-4 times a day. I need a reliable router that does not reboot so often.
View 5 Replies View RelatedLinksys Wireless Router :: WRT45G Reboots On Accessing Web Base Utility
Sep 22, 2011i have router WRT45G ver 7 it work but when i want to access in web base utility the router reboot
info:
led power is on stable
led lan is on
led wlan on and the access point work
1.http:\192.168.1.1
2.enter user name and password (admin,admin)
3.hir the page begin to get after a few second the router reboot Page cannot be displayed completelty
i try :
- simple reset
-(30/30/30) reset and i enter in managment mode firmware upgrade
i don't try hardware reset
Linksys Wireless Router :: E4200 Constant Reboots With Media Streaming
Dec 5, 2011I upgraded my E3000 to a new E4200 several months ago. I use an SSL VPN to connect to work which worked fine on 1.0.01 and 1.0.02 but I upgraded to 1.0.03 to fix an issue where the router constantly reboots when I stream Netflix or Hulu and now the router reboots with Netflix, Hulu AND the SSL VPN tunnel initiation.
View 6 Replies View RelatedLinksys Wireless Router :: E4200 Reboots Every Time When Use AirPlay From MacBook Pro
Oct 16, 2011I've just confirmed that everytime I try to stream music from my MacBook Pro (iTunes) that is connected to my WiFi network using the 5GHz mode (channel width is Auto, channel: Auto (DFS)) to a couple Airport Express cubes are connected via the 2.4 GHz WiFi (channel width: Auto, channel: 10) the E4200 router reboots. When I set the MBP to use the 2.4 GHz mode I can stream music without causing the E4200 to reboot. The E4200 is running firmware 1.0.03.
View 9 Replies View RelatedLinksys Wireless Router :: E4200v2 Giving Non Stop Random Reboots
Apr 1, 2012Watch youtube? Router resets! Hookup a wired connection? REBOOT! Hookup a tivo wirelessly, use wifi calling, or listen to spotify.. REBOOT!Is there ANY way for this router to NOT reboot randomly?
View 4 Replies View RelatedLinksys Wireless Router :: WRT310N Loop Reboots / Can't Even Make Ethernet Connection
Dec 5, 2011My WRT310n router, since yesterday, stopped working "normally".It was disconnected from the power plug in order to put it in another shelve and when I plugged it in, voilá, constant reboot.I keeps rebooting forever... I can't even make an ethernet connection. Reboot, after reboot. Tryied to make a reset with no luck, 5 seconds reset, 30s reset, pressing reset while plugging it in.Even with nothing connected to it (neither wireless nor lan), just the power plug and it keeps re booking one after another.
View 2 Replies View RelatedRouter Gets Disconnected Then Automatically Connects To Different Unsecured Linksys?
Aug 10, 2012I have an iBoss router at home that is secured. Occasionally, I'll noticed, I am no longer connected to the iBoss router and connected to an unsecured router named linksys?
View 1 Replies View RelatedLinksys Cable / DSL :: WAG320N Is Always Disabled Automatically By Windows 7?
Oct 2, 2011Device: Linksys WAG320N Dual-Band Wireless-N ADSL2+ Modem Router with Gigabit
Firmware Version:V1.00.12
System: Windows 7 64bit Ultimate
Error: WAG320N is always disabled automatically by Windows 7 Each time power on WAG320N, it works well for a while ( 1 to 5 minutes), can also make the ADSl connection automatically. After that time, WAG320N is always disabled automatically by Windows 7. Need to manually Enable it in Windows 7, once it is manully Enabled, it work well for days.
Linksys Cable / DSL :: WAG120N Didn't Update DynDNS Automatically
Apr 14, 2011I just bought the WAG120N , firmware version is v1.00.12, but it seems it has a problem with the device here.I have to turn off the system / device every time i want to get my dynamic ip update into dyndnds.org , it cant auto update the new dynamic ip.What problem that cause somethin like this?I already upgrade the firmware into 1.00.16 , but it didn't solve the problem.
View 1 Replies View RelatedLinksys Wireless Router :: E1000 Mac Doesn't Automatically Reconnect?
May 7, 2012I recently got an E1000 router brand new V2.1 from a friend. Seems to run great, only problem both my Mac Book Pros (running snow leopard and lion) will not reconnect automatically to the wifi after waking up from sleep.
View 1 Replies View RelatedLinksys Wireless Router :: EA3500 Upgrade Automatically Turned Back On?
Jul 5, 2012After I restored my router to the classic firmware last week I unchecked the automatic upgrade box. This morning I found the box checked again. The router still has the firmware version I rolled back to last week. It appears Cisco has the ability to make changes to my router whenever they want.
View 2 Replies View RelatedLinksys Wireless Router :: WRT320n - How To Enter Automatically Username And Password
Apr 22, 2012I use an internet network via wifi that require username and password. The router for wifi network in my place and i connect my cisco(linksys wrt320n) to the router. Every time i want to connect to internet i have to enter my username and password.I try to configure my cisco modem but there is no result. Is there any way or program to automatically enter the username and password?
View 3 Replies View RelatedLinksys Wireless Adapters :: AE1000 Doesn't Automatically Connect To Network
Mar 15, 2011So my AE1000 adapter doesn't connect to my network after waking my computer up from standby mode. I tried disabling the power management option where it allows you to turn off the device to save power but it still won't automatically connect to my network. I have to manually remove the adapter from the usb port and plug it back it for it to work again. I'm using Windows 7 64 bit,the latest drivers from Cisco's website, and my anti virus program is Microsoft Security Essentials
View 4 Replies View RelatedLinksys Wireless Router :: WRT160Nv3 Resetted To Factory Defaults Automatically
Mar 9, 2013today I got up and discovered that my WRT160Nv3 router has resetted to factory defaults itself, the name of the Wifi network was "linksys" and all configurations were the defaults...
That's normal? This is the first time it happens.
Linksys Wireless Router :: E4200 DHCP Server Not Automatically Assigned
Jan 4, 2012I just bought a Linksys E4200v2 router and updated the firmware to 2.0.26.124551. The DHCP server is turned on however, it won't issue any IP addresses. I have to set IP reservations for all of my devices in order for the router to give them an IP address. This includes my printer, xbox360 and 2 computers. I'm also having this problem with the wired and wireless lan.
View 4 Replies View RelatedLinksys Wireless Adapters :: WRT120N - Lose Wireless Connection Every Time The Computer Reboots?
Mar 26, 2013I have a Cisco WRT120N Router and a Cisco Valet AM10 wireless adapter. Almost every time the computer reboots, I loose my network and I have to redo the AM10 setup. The AM10 is the only device that loses the connection, my lap top and printer do not lose the connection.
Problem 2: Everytime I upplug and replug the AM10 a window pops up saying I need to check the drive for errors but none
are found.
Problem 3: I downloaded the AM10 install program, Downloadable.Setup.AM10.1.2.10148.2. It does not work. If I try to run it Iget an error message that the setup canot be completed and to call in for support.
Problem 4: When I can get it working is shows that it is Wireless Connection 5. Why 5 and not 1? Where are the other 4?
<script id="overlay_tmpl" type="text/html">// <div id="<%= overlayId %>" class="_mp3rocket_overlay_style" style="left: <%= overlayLeft %>; top: <%= overlayTop %>; width: <%= overlayWidth %>; height: <%= overlayHeight %>"></div> // </script>
Linksys Wireless Router :: WRT54G2 Doesn't Automatically Connect To Internet On Computer Start-up
Aug 12, 2012My WRT54G2 v1 does not automatically connect to the internet on computer start-up. The computer will say "Connected, No Internet Access" In order to fix it I have to unplug the router and then plug it back in. This happens to any computer that tries to get online from a cold start-up. The router must always be unplugged, then plugged back in, then it will have internet access (and will generally maintain it throughout the session and even if the computer is restarted, i.e. warm boot). I have downloaded the latest firmware uprade.
View 9 Replies View RelatedRouter Reboots By Itself?
Jan 8, 2011I bought it without a a windows installation because i already had a copy of vista 64 cd which I installed when I got the computer. Then I realized vista couldnt handle the amount of ram my computer had or support some of the other new hardware, so i went online and purchased a copy on Windows 7 for 600dollars and digitally downloaded it from a non microsoft site, as it turned out after I installed it the cd validation key was not included in the purchase sadly so I was running it as trial version for 30 days.Anyhow, at some point (and it has been going on for awhile) my router reboots quite frequently when I am online playing games such as Civilization 5 , world of warcraft and CoD on this computer. Sometimes it can reboot up to 3-4 times an hour if I'm really unlucky! When I'm not playing games and just surfing the web it is rare the router restarts, and while I sleep I keep my computer online and it dont reboot at all.
So it is basically when I play online games this occurs the most. However! If I play games online on my laptop or playstation 3 the router -never- reboots, so it's obvious the problem is not the router itself since it works with my ps3 and laptop but not my stationary gaming computer
D-Link DIR-825 :: Rev A Serious Performance Reboots
Feb 17, 2012I continue to have significant performance and random reboots with DIR-825 router (hardware: Rev A1; Firmware: 1.13NA). My ISP has checked the lines to my cable modem. If I connect any of my laptops or PCs directly to the cable modem and work off the direct connect, all works fine with no problems for many days and even mutliple weeks. So, the router seems to be the bottleneck/issue.
I've tried multiple settings changes as listed in the forum here. My setup is fairly simple and detailed below.
Setup -> Internet:
-- Dynamic IP (DHCP)
-- I have disabled "Enable Advanced DNS Service"
-- "Use Unicasting" is enabled
-- I have primary and secondary DNS servers set
[Code]....
Linksys WRT54G Has No Internet
Sep 22, 2011I have a DSL modem and Linksys WRT54G wireless router for several years and haven't had any problems. I decided to move the router and modem to a different room. Upon replugging everything in, I can't get an internet signal from my router. My modem seems to work fine-all lights are on and if I plug my laptop directly into the modem I have internet access. But, if I plug the router into the modem, I can't get internet signal both wired or wirelessly through the router. All of the lights on the router turn on-showing I should be getting internet signal [power light solid, WLAN light on, internet light on], but my computer won't open a website. I've done reboots on the modem and router. The router was working great prior to moving it. My DSL company says everything is fine on their end. I receive a Ping back from the router as well. What else should I check or do I need to do?
View 1 Replies View RelatedLinksys Wrt54g V5 - To Use Like A USB Stick
Sep 1, 2011I have a linksys router connected to four computers and putting out a wireless signal. I also have a PC upstairs I would like to get online, and have a WRT54G V5 wireless router that I want to use like a wireless USB stick. Is this possible without downloading additional firmware beisdes official Linksys firmware?
View 6 Replies View RelatedUse Old Linksys WRT54g Ver 2 As A Bridge?
Aug 1, 2011I have a bluray player that I want to get internet to that is downstairs. I would like to use my old Linksys WRT54g ver 2 router to do this. I just put DD-WRT firmware on it. I have a Linksys E1000 as my primary router. All I want to do is be able to to put the Secondary router (WRT54G) downstairs near the bluray player and run an ethernet cable from the lan port on the router to the ethernet port on the bluray player to get internet access. What is the best way to do this? Client bridge or Client mode?
View 2 Replies View Related