Virtual Wifi - Ics No Longer Working Correctly
Mar 27, 2011
I use the Windows7 Virutal WIFI when traveling abroad to give my Iphone an internet connection in my hotel.I've had zero issues until this week. The WIFI connection is still showing up on my iphone, but I no longer get internet access (I only get an IP and subnet on the iphone now, no router or DNS info). The issue began (coincidence or not) as my MagicJack downloaded and installed a software update. MagicJack support says they aren't the issue. I experimented with created an Ad-Hoc network...no change. I've removed and reinstalled the wireless card and driver. No change. I suspect some corruption with ICS, but haven't found any solutions online to fix it.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Richard-PC
Primary Dns Suffix . . . . . . . : MARCOGROUP.local
[code]....
View 1 Replies
ADVERTISEMENT
Apr 15, 2011
I installed virtual pc 2007 that has winXP and my host is Windows vista. I was able to make my virtual pc to connect to host internet using NAT for adapter 1 long time ago without any problems but it is not working anymore since last month! Although it works when I try it on another host. I believe the problem is in my host so what to check excatly in my host.
View 1 Replies
View Related
Jan 14, 2011
We have two laptop computers and our Tivo hooked up to use the wireless internet through our cable company with a Belkin router. Over Christmas we got a camera that emails directly from it, and it told us to press the WSP button on the Belkin router. The camera magically worked, however our computers did not work anymore! After an hour long phone call to Belkin, I got one of my computers to work normally again. However the 2nd laptop won't connect to the internet and our tivo isn't picking it up either, which mean our shows are not recording.
Also, I'm using two apple computers. When I attempt to hook up the airport network, it says "unable to join the network."
View 2 Replies
View Related
Dec 9, 2012
I recently aquired a 2nd AP1140, however when i configure it for WPA 2 it works inconsistent, a ping for example will work only for 33% of the time.The same client has no issues with my 1st AP using WPA2, with the 2nd AP WEP works without a glitch.
View 2 Replies
View Related
Jan 18, 2012
we are running CiscoPrime LMS 4.1 and I have the following problem.I have configured SNMP Settings as shown below (the order of the targets is exactly as it is configured on the server):As can be seen we use three different read community strings. I also have exluded a bunch of IP ranges and IPs from the filter settings. When I manually start discovery everything works fine, meaning that all devices in the above ranges that need to be discovered are discovered as "reachable". The problem appears in the scheduled discovery (happens once daily). In that case only the devices with Read Community snmp1, get discovered as "reachable". All other devices with Read community snmp2 & snmp3, as well as those that are excluded in the filter settings, are discovered as "unreachable".The discovery uses DCR as seed and seed devices are also configured.I also have a problem with PingSweep in the discovery, but I will open another discussion so that I don't complicate this one too much.
View 1 Replies
View Related
Sep 23, 2011
My RV220w has a problem with DNS. I have configured the device for my network, but it seems as though DNS is not working correctly. For a background, I have a primarily Windows environment in my network, W7 PCs. I use homegroup to share files/printers amongst them. I like that I can type "\<server-name> in the Windows search box, and up comes the other computer's files. This functionality is still there with the RV220w, so that's not my issue. My problem arises when attempting to type "<server-name>" into the Remote Desktop Connection dialog box. I can no longer RDP to my other computers by name. Attempting by IP does get me there.
View 11 Replies
View Related
Aug 30, 2012
We have LMS 4.1 - it was working perfectly for some time - it was rebooted and now the services don't start correctly. I manually started most of the services but the Daemon service will not start.
The main page comes up and after I log in - all the sections list an error
'License Server / Deamon Manager is down. Please check license.log for more information'.
View 3 Replies
View Related
Feb 2, 2013
The internet connection on my laptop does not work correctly when connected to lan ,but it works fine for the WIFI.i checked the internet connection ,it works fine in other computes.most of the time the connection through lan is not recognized. sometimes it works fine for 1 day and does not work for another day.
View 8 Replies
View Related
Apr 20, 2011
It seems that motion monitoring setup for 930L is not working correctly.I've setup the camera to ONLY monitor the half of the screen, but it is still monitoring the other half of the screen as well.I've setup the camera to FTP the messages when motion is detected, and it is uploading the images when the other half contains the motion.
View 6 Replies
View Related
Jun 17, 2012
I am trying to configure a 3560 (Version 12.2(55)SE3) with IPServices to run WCCP to two to an Ironport WSA.
I believe everything is setup correctly, however WCCP is still not operational. I have check the debug logs on the switch and I'm presented with a number of messages along the lines of...
*Mar 1 03:44:47.891: WCCP-EVNT:wccp_update_assignment_status: enter
*Mar 1 03:44:47.891: WCCP-EVNT:wccp_update_assignment_status: exit
*Mar 1 03:44:47.891: WCCP-EVNT:wccp_copy_wc_assignment_data: enter
[Code]....
View 7 Replies
View Related
Feb 8, 2012
We have an RV042 on firmware version 1.3.13.02 and 2 ISPs:
WAN1 = Telepacific T1
1.5Mbps down and 1.5Mbps up
WAN2 = AT&T U-Verse
12Mbps down and 5Mbps up
I have it set to Load Balance, Primary WAN = WAN2
Network Service Detection enabled, only pinging the Remote Host of 4.2.2.2 and set to Generate Log
Bandwidth is set to:
WAN1 = 1000Kbps upstream & downstream
WAN2 = 5040Kbps upstream & 12000Kbps downstream
It seems to pick WAN1 a lot of the time. Do I have something setup wrong?
View 12 Replies
View Related
Jan 30, 2012
I have a Catalyst 3750 switch configured in a network. I would like an additional 3750 switch as a "hot" standby. A 2nd 3750 switch was purchased, and the same configuration was entered in to the new switch, so I have 2 switches with the exact same configuration.
When I move the connections to the new switch, I have a few VLANs that do not come up. One VLAN does come up and work normally. The VLANs in question show down, protocol down, and a show ip route reveals routes to the networks on these VLANs are not there When I put everything back on the original switch, everything works normally.
Why would the new switch not work with the exact same configuration?
View 6 Replies
View Related
Feb 19, 2013
Since a couple of weeks I have a linksys EA6500. When I go to the device list to see which devices are online the device list is not displayig the correct data. I see devices online that are offline and also devices are offline that are at the moment online. When I try to delete a device that is offline in the list I get error 2315. I have that error in the local and cloud interface. The list has a frozen state from a particular moment.
When I reboot the router then all devices in the list have status offline and the device list stays that way. Nothing gets online anymore or will be added. When I reset the router to factory default all keeps working without problems for approximately 24 hours and after that the problem occurs again. The list freezes again and you are not able to delete a device.
I searched the forums but no one has this problem. I only can find a post that describes my problem but for them a reset worked. In my case a factory reset works also but the problem keeps coming back.
View 9 Replies
View Related
Feb 11, 2012
All Installed my AE1000 this evening, after two go`s got it to work BUT the Cisco installer comes up with "Our customer support team can assist Your Linksys Adapter was not successfully setup." but it is working .. I never got the screen with the four "bubbles" (as per the instructions here on the Cisco website)
PS Running Win7 with AVG security
View 1 Replies
View Related
May 27, 2012
I have a DLink DIR-615 rev. B2 firmware 2.25. A few days ago, I started using Comodo Unite for VPN access with friends and LAN gaming. However, just recently the program stopped working correctly. I have reset my configuration, tried multiple different settings, and nothing at all has remotely worked.
View 3 Replies
View Related
Mar 7, 2012
I just added a X6704 card to our 6513 switch, and it is not working correctly. We are running 12.2(33)SXI5. [code]
View 5 Replies
View Related
Feb 5, 2011
I was using desktop computer and got infamous blue screen of death Rebooted and everything was fine except could no longer could see LAN connection or connect to internet The desktop computer also has a wireless card that allows me to connect to router wirelessly but only get "connect with limited access" I have a cable connection through a router and tried connection dsl directly to ethernet and bypassing router but no change Router works for other laptops to connect wirelessly I can see both network adapters in the device manager and both say devices are working properly Here are the results of ipconfig /all:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersCooper>cd c:
c:>ipconfig /all
Windows IP Configuration[code]......
View 5 Replies
View Related
Apr 23, 2011
My Internet surveillance stopped working
View 1 Replies
View Related
Jun 2, 2011
Last night on the xbox 360 i was suddenly experiencing alot of lag on other peoples voices. i took no notice of it and the next day i went on my laptop and alot of websites wouldn't load properly.i can go on google,obviously this and my hotmail(after having to wait a long time for the hotmail to load), but others such as ebay will not load. I cannot even access my router settings by typing in my ip address, instead i get a message saying the page cannot be found. also i was disconnected from xbox live with the internet to xbox live part not working. Obviously the first thing i done was turn the router off and back on but it hasn't made any difference.
OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 64 bit
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4055 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1804 Mb
Hard Drives: C: Total - 290204 MB, Free - 141170 MB; E: Total - 14999 MB, Free - 5644 MB;
Motherboard: Dell Inc., 0G848F, , .5MDJWJ1.CN7016697U05OT.
Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled
View 3 Replies
View Related
Aug 21, 2011
I have XP running on this older laptop for my kids.I wish to connect this laptop wireless (WPA2 encrypted) with the internet AND with other hardware in my home (other pc, harddisk, mediaplayer, printer).I know it can be done in windows 7, and Microsoft also had a virtual WiFi research project for a WEP encrypted visual WiFi.But as said I need a WPA2 encrypted virtual WiFi for a laptop running XP.
View 14 Replies
View Related
Feb 21, 2012
Port Forwarding Bug - Working but not working? I'm so pissed as I've been working on it for hours and it still doesn't work. The only additional information apart from the ones located in the link is that in the security log something about the NTP.
View 4 Replies
View Related
May 24, 2011
I've been using my AE1000 for about a month now with absolutely no problems. Yesterday it just stopped working, I removed it from the USB port and just about burned my fingers on the metal part that plugs into the USB port. BTW I am on Windows 7 64-bit.
Now it won't work. I've tried reinstalling the driver and the device just blinks in the "Devices and Printers" control panel. I removed it again and it was very hot to the touch after only being in the port for about a minute.
View 1 Replies
View Related
Oct 17, 2012
Network hub, model f5l009 not registering as a connected network USB Hub. Therefore, unable to update firmware. Devices connected to HUB are of course also not showing up. Reinstalled drivers. PC Windows 7 home pro on Comcast and a Cisco router. Firewalls are set to "allow". Only change in system is from internet providers to "Comcast". What might be causing the problem? Tried connecting directly to the Comcast router and that didn't work. Tried a hard reset on the HUB and that didn't work. If this device has failed is there a way to replace it?
View 1 Replies
View Related
Jun 13, 2012
I have a Cisco ASA 5510 (with an AnyConnect Mobile License enabled) I used to be able to connect to the VPN using the AnyConnect app for Android form the Google App store (the phone is a Samsung Galaxy S II LTE, if that matters). Like I said everything used to work fine until a few weeks ago, the only change I made to the router was giving it a different external IP address (I changed ISP), I'm pretty sure it worked after that. But now when I try to connect with my Android I get this error: "Clientless (browser) SSL VPN access is not allowed".
View 1 Replies
View Related
Oct 26, 2012
A couple weeks ago my HP laptop stopped working. It would not boot and I had to put in the recovery discs to get it working again. Before this the laptop had connected fine to my home wifi secured with WPA2-PSK[AES]. After this problem tho it refuses to connect while it is secured. When not secure it functions fine and I am currently using it to type this post. I would have no problem continuing to use the wifi unsecured but another member of my household works with confidential medical information from home and is worried about the lack of security. I have attempted the trouble shooting tips on the support website already. My computer model is HP G60-235DX and the router is a Netgear N300 model WNR2000v3[CODE]
View 4 Replies
View Related
Dec 28, 2011
I have created a virtual WiFi hotspot in win 7 laptop with following commands. netsh wlan set hostednetwork mode=allow ssid=wii key=abcd1234 Now there is a 'Wireless Network Connection 2'(MS virtual WiFi miniport adapter) in my network connections. netsh wlan start hostednetwork WiFi hotspot started and visible in my other wifi device. But the device shows limited connectivity and i can not use internet not even local access to laptop.
My observations - I found that the IP address and DNS of WiFi miniport adapter is 192.168.11.1 But the IP assigned to my other device is 169.XXX.XX.XX which is not in same subnet
So how to set the WiFi miniport adapter of my laptop to assign proper IP address(within subnet) to my other device. So that i can get rid of LIMITED CONNECTIVITY ISSUE .
C:Userssam>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : samlaptop
[Code]......
View 2 Replies
View Related
Mar 17, 2013
Taking another look at Dview cam today after not touching it for 3 months after initial install.The dcs-2132L can't connect.I can to the 2132L directly... I changed the port as a test.. Port 80 wasn't working originally.
[url]....
View 9 Replies
View Related
Aug 10, 2011
There is one guest interface, one guest WLAN. The WLAN is set with a DHCP override address of the guest interface. But it no longer allows this as I found out. Anyway, I can get the client to now receive an address from the internal pool on the WLC, but it will not route to the authentication page. I noticed that the WLC excludes the clients attempting to connect on the guest WLAN due to failed 802.1x authentication! the WLC never even gave me the chance to authenticate using an account created either through the lobby ambassador or creating one directly on the controller.
View 3 Replies
View Related
Nov 2, 2011
RV082 Firmware Version 2.0.2.01-tmRV082 Firmware Version 2.0.2.01-tm
View 1 Replies
View Related
Feb 10, 2011
Two days ago there was a quick power outage here, just one of those flicks off flicks back on deals, but when it came back on I noticed my internet wasn't working. Couldn't figure out what the deal was so after trying a few other things I ended up eliminating my Linksys WRT54G router and just using my DSL modem. Internet works fine.
Now, I've always been kind of sketchy on networking stuff, but I don't think there router is broken I just think it's been reset or something and now I don't know what setting I need to change to get it back to working order.
Here's the kicker though. I had the DSL modem in bridge mode and the router handling traffic before but I had a huge issue with that where my Steam would only download at 10-15 KB/s. Not only that but it would take forever to login and crash constantly. This would happen on my brother's computer too, which is on the same network. I could never figure out how to fix it as forwarding ports had no effect and every other fix I could think of amounted to nothing as well. Hell, I even did a fresh install to no avail.
Now going straight into the modem my Steam is downloading at full speed and there's no slow login or crashing issues. The thing that boggles my mind though is that more than once before I tried doing this very same thing, going straight into the modem, and it didn't fix the problem.
Ideally I want to get the router back up and running and keep my Steam in full working order, essentially to have my cake and eat it too, but the priority is to get the router back up in running as I have another PC on this network, plus a 360, a PC, a wireless printer, and two Wii's.
View 10 Replies
View Related
Nov 4, 2011
Why is loop-back only working on ports forwarded in the Virtual Server section and not Port Forwarding or even DMZ? I have seen a post about loop-back on the DIR-655 from a while ago that had said to disable SPI and change NAT Endpoint to independent, I have done this and loop-back still doesn't work.
View 1 Replies
View Related
Jun 15, 2011
My AE1000 has worked for about 2 weeks, but just stopped working. Have tried to reinstall but it won't recognize the adapter. I can't click the "next" button to continue the installation. I have chagned the USB ports and restarted the computer. But it still wont install. I have Windows Vista. I also have Norton, do I need to uninstall this?
View 1 Replies
View Related
Jun 24, 2012
I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem?
View 2 Replies
View Related
