Xirrus Wifi Inspector Shows No Adapters Available
Feb 12, 2011
I am running XP SP3 with .NET Framework 3.5 SP1. The wireless network adapter works fine using either the Atheros Client Utility (my preference) or Windows Zero Config, Since someone mentioned the latter as possibly being necessary, I have been using it for these tests. It is, thus, not surprising that the wireless network adapter is present in and shows no problem in the Device Manager (devmgmt.msc), or ipconfig output; however, Xirrus WiFi Inspector shows "No adapters available" and does not function. How to get WiFi Inspector running?
View 2 Replies
ADVERTISEMENT
Oct 30, 2012
I am using Xirrus WiFi inspector to survey the signal in y house and I notice a very strong signal at 160dBmMy home signal is in the region of -60 dBm so I am surprised to see such a strong signal at 160I have attached a screen shot so you can see BTOpenzone and BTHomeHub-WM9R with a high power.
View 3 Replies
View Related
Jul 26, 2012
I have a E2500 router and just got this AE3000 adapter. Thought that would bump up the wireless signal for using my laptop at the other end of the house about 75 feet from the router. The new E2500 Wireless N has been a big improvement. The AE3000 installed perfectly and shows up as working properly. It's just that the signal strength on my laptop shows 2 bars and the signal strength for the adapter shows 2 bars.
View 2 Replies
View Related
Dec 19, 2012
Outside users with certain public ip addresses are not able to access our website. Below is a log from our ASA 5550 8.2(5) on one of the clients that's being dropped. Packet trace result shows that the outside public addresses are allowed. We do have a TAC case open.
View 1 Replies
View Related
Sep 2, 2012
when i connecting my ipad to wifi network it shows authentification timed out. what is its mean
View 1 Replies
View Related
Mar 2, 2012
When I'm on a fresh boot on my laptop (full shutdown then starting back up) my wifi connects just fine....perfect.However, when I close the screen (its a laptop) and it goes into standby...when I wake it up again my wifi icon by the clock shows that its still obtaining an IP address or whatever (little yellow dot bouncing back and forth over the icon)....The icon will stay like this until the next time I reset the computer....but the entire time my wifi works as it should....its just the icon thats being weird.
Fresh install of Windows (as of two weeks ago)
Windows XP SP3 - all updates are current
Dell Latitude D610
Dell Wireless 1470 Dual Band WLAN Mini-PCI Card
Broadcom NetXtreme 57xx Gigabit Controller (wired cat5 disabled)
1GB ram
all drivers up to date
Like I said...everything is working as it should..Its done this since I've done the fresh install of Windows, so it has nothing to do with any software I've installed or any of the updates.
View 19 Replies
View Related
Sep 29, 2012
Laptop connects to wifi network. But it shows "No Internet Access" message.My Macbook connects to the internet just fine and the wifi on my iphone works as well.The ethernet on the laptop works and I am able to access the internet this way. The laptop does connect to some of the other access points but I've had issues with my router.I tried the usual debugging mechanisms - disable/enable adapter, reset the router, reset the tcp/ip stack. [code]
View 1 Replies
View Related
Apr 18, 2013
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP : HughesNet
I received this router today, I have a MacBook Pro and a iPhone. The router came with a very small cd, I was very disappointed because , when I purchased this router from amazon , the discription read that this router is Mac compatiable. But that is not true if the cd is not compatiable! My problem is I get a good signal for wifi, but I can not open any websites with my Mac or my iphone.
View 1 Replies
View Related
Oct 15, 2012
I Have asa 5520 with the code 8.0, the mem shows 94% and the CPU shows 85%
View 5 Replies
View Related
Jul 1, 2011
I have a compaw CQ61 that is using the operating system windows 7 64x.
The problem occurred today when logging onto windows. Windows tells me that the connection i have to the router is limited. Other devices i have in the house are capable of connecting to the wifi router. When deleting the connection and trying to reconnect to the router, it brings up the message that it is taking longer than expected to establish a connection and then eventually brings up the message "limited connetion"
When trying to connect the laptop to the router via cable, it doesn't even recognise that it is connected and does not establish a connection.
When using the windows connection troubleshoot, it detects a driver problem with both the wifi adapter and the Lan adapater. Therefore i uninstalled and reinstalled both devices but still suffered the same problem.
When clicking the connection i am attempting to connect to, right click status, details.. everything is in blank, it gives no information regarding to the connection.
View 14 Replies
View Related
May 1, 2012
Any good suggestions for a quality wifi adapter ? Everything I've used so far has been terrible.
View 1 Replies
View Related
May 11, 2011
can i get better speed by using two wifi adapters at the same time
View 2 Replies
View Related
Dec 18, 2011
I am trying to install a Belkin N600 to a Windows 7 desktop with no luck. When I run the setup off the install disk it attempts to install the driver needed for the N600, but every time it fails the install stating that the device is not functioning. When I connect the N600 to my computer it sees the device but its almost like my usb ports are not powering the device even tho I have connected a lash drive to all of my ports to make sure they were working, and they are( All usb ports are 2.0).
View 2 Replies
View Related
Jun 6, 2012
Recently upgraded home router to Linksys EA3500 and a AE3000 Adapter for my laptop. Laptop is Dell Inspiron 1705 (yeah, it's old) running XP SP3. the adapter's drivers installed properly from the supplied CD as it negotiates and connects with the new router. However, there is NO Linksys Wireless Manager. It appears it was not installed at all. I can find no folder in Program Files named either Cisco or Linksys nor anything new in the Programs list. Is there a Linksys Wireless Manager included on the CD that should have installed?
Can I download it separately and install?I've disabled the built-in Dell wi-fi radio with came with an Intel ProSet wireless manager. Would REALLY like to have a new wireless manager that works well with the new adapter. Am going on vacation tomorrow and will have to deal with new and different access points, hotels, etc.
View 1 Replies
View Related
Jan 29, 2011
I've been having major issues with my wireless on this computer (randomly decides not to work while computers in the same room are fine) so I got a new wireless card to see what it could do. Installed it, everything says it's installed fine, but it will NOT detect any wireless networks. Not just mine, any of the 8+ networks I can usually detect from my room. I'm on Win7 Professional 64.
Things I've tried (and I'll be seriously annoyed if people reccomend doing them a 14th time, as I've already spent an hour on livechat with a support person telling me to do things I told her I'd already done):
Installed with 4 different drivers (the ones on the CD, the ones on the website, two versions directly from Ralink for the chipset) Tried both the manual and automatic "update driver" options in device manager. Uninstalled/reinstalled it like 4 times. Moved it to a new PCI slot.
Removed the old adapter before installing it. Removed the old adapter after installing it. Tried connecting to my network as a "hidden" network (which it's not). Installed only the driver and not the adapter utility, and used the utility. Installed the software before physically installing the adapter. Installed it after physically installing the adapter.
I'm at a loss. It doesn't detect ANY networks. No, it's not a problem with my network, there's more than a half dozen that my other adapter, in the same computer, can detect. And I don't know why. It has not ever worked properly. The antennae are on properly, nothing is interfering with it (though that would be odd since it's 3 inches from an adapter that can detect other networks). I might be willing to accept that it's just DoA, but that would be odd considering it installs just fine and reports that it's working just fine.
View 2 Replies
View Related
Jul 14, 2012
Just bought this Linksys AE3000 Wireless Adapter. I followed the directions, run Setup on DVD....then plug unit it.Adapter NOT Found!Unit Blinks Blue light every 8 seconds..
Note, that when first plugged in.......Device driver auto downloaded...and said ready for use. I gather through Windows 7
View 1 Replies
View Related
Apr 21, 2012
I have a desktop PC with no wifi card that I want to use with a Clear Wifi hotspot. I have a WGA54AG Linksys Gaming Adapter and I want to use this with the desktop to access the wifi. I do not know how to reconfigure the gaming adapter for the CLear hotspot's security protocols.
View 1 Replies
View Related
Mar 29, 2007
I just got a WET54GS5 to use for game systems. i wa able to use the software in order to get the system online and working, but i am not able to access the wireless bridge though the web page. the username is blank and i put in the correct password, but it does not go through.
View 7 Replies
View Related
Jul 13, 2012
I have a router attached to my Dell desktop running Windows 7 and am trying to install the AE2500. Instead of using the router, I want the AE-2500 to access my HotSpot wifi on my cell phone. I go through the AE2500 installation and Device Manager shows it is installed properly. However, I do not see the adapter in my list of available wireless connections and I'm unabley to disconnect my router connection. I keep clicking disconnect but it never does.
View 1 Replies
View Related
Jun 9, 2011
I recently acquired a WMP600N-EU that is running under W7 x64 with the latest Linksys available drivers for download, which unlike the default MS ones, don't enable the Virtual Wifi adapter.Now with this new adapter, the wireless icon starts with the blue circle spinning, and the at the point the other adapter was already connected, it displays the "orange sun" (not connected, connections available) and stays there dead for some 10 seconds. At this point, my router's SSID is already listed. Only after that time it will start to successfully auto-connect to the pre-configured network, whereas windows has already finished loading or the browser launched unable to check mail.This is obviously not a functional fault on the adapter. If I didn't had the previous adapter to compare, I might find it normal. Btw, I've cleaned every previously stored wireless connections.
View 3 Replies
View Related
Apr 16, 2012
have received an Cisco Model DPC3925 modem/router from UPC (provider in the Netherlands) and they allow me to have 120Mbit connection, but with my own WIFI Adapter I only received between the 40Mbit/60Mbit speed. My question is the following; Wich WIFI adapter is the best adapter for my Cisco Model DPC3925 modem/router?The distance between the modem/router and my pc is not that much. And when I use an cable the connection is between the 90Mbit/110Mbit. The WIFI adapter that I now use is the: TP-Link TL-WN881ND. I was thinking to buy a Linksys AE1200, but I dont know if that adapter is much better then I already have.
View 6 Replies
View Related
May 8, 2012
I have a Windows 7 Laptop which has got a red X on the connectivity icon even when connected, and this since april. Now, I don't have any idea of what caused it. I have Tunngle installed, but i don't think that's the problem. I also have updated my internet drivers, but without success. In the network boards i also have a weird second wireless connection which is called "Microsoft Virtual WiFi Miniport Adapter #6"
View 5 Replies
View Related
Apr 21, 2011
my ps3 shows a message saying 8003121 what time round about is it gunner be fixed
View 1 Replies
View Related
Aug 6, 2011
I updated the firmware of my DIR601 to 1.02NA, it now only show NA under status for WAN, even though its connected (PPPoE). It worked with 1.01NA. I tried rebooting the router but no effect
View 1 Replies
View Related
Jul 4, 2011
My HP Envy 14 has an Intel 6200AGN wireless card. Is it not good enough to achieve 300mbps on my D-Link DIR-655? The firmware is current on the router and the signal is 100% almost every where in my home. Even when I'm a few feet away from the router, the most I'm able to get is 130.Do I need to change a setting on the router or upgrade the wireless card?
View 2 Replies
View Related
Dec 20, 2011
nslookup shows all ip addresses of a nic. is this expected? i think it should just show the default IP
View 3 Replies
View Related
Jan 24, 2013
I just downloaded TV show Downton Abbey from iTunes, and I know from somewhere that it has so called DRM protection, but I am trying to move it to Surface RT. What should I do to make it happen?
View 1 Replies
View Related
Jul 1, 2012
The route is connected to that. Wirelessly, there are two laptops and sometimes an iPad and sometimes a Wii. Verizon DSL. I barely use my laptop during the week, but did notice some connection issues maybe Thursday and Friday nights. All day yesterday and today, as well. I will have a connection for maybe 5 minutes and then get errors loading webpages (and/or videos stopped). I will repair the connection and it will say everything is fine but it will not work, repair again or disconnect/reconnect(sometimes, several times) and then it works for 5 minutes or 20 minutes before the same thing happens. The other laptop is having the same problems. What I have tried so far: restarting the PC, both laptops, the router, and the modem. Resetting the modem. I have not moved any furniture or anything that would cause interference. I am worried because I have been trying to make more money and started at this site called Treasure Trooper which seemed okay-surveys and the like. There were a few pay-to-download things I downloaded but did not run. Avira found a trojan and I deleted it (not sure if the two are related, but I can not think of anything else I have downloaded or installed in the past month or so).The old PC is off; the Wii is on but probably only maintains a small connection. The iPad and other laptop are not mine, but if either is on, they probably have little to no activity right now since the user is away.
View 1 Replies
View Related
May 21, 2011
trying to network 2 desktops running xp.
View 14 Replies
View Related
Aug 2, 2011
My Acer One Aspire wireless connection shows connected but I cant get any Firefox browser to work.
I have a D-link DIR-825 router and it has worked every time except today. I havent used my Netbook very much at home though, maybe a few times a year as I usually take it with me on trips.
I attempted to narrow down the problem. I called D-link as my router was still under warranty. They advised clearing all my old connections and rebooting but I got the same problem. I told them my Sony PS3 works, so they suggested I contact Acer as they think it is not the router. My direct hardwire connection also works.
I then took my Netbook to Best Buy and it worked there. The guy said they can pay a visit to my house as it is probably interference of some sort. This will cost $100. Why would my PS3 work if it was interference? Maybe it�s the proximity of my Netbook to something, but I tried it near my PS3 and it still had the same problem.
Id rather try to solve the problem myself first. I havent changed anything except a modem and Windows 7 updates.
View 11 Replies
View Related
Feb 20, 2011
We have a fairly new Asus laptop and for some reason we can't get the wireless to turn on any more.It has a Function button method to turn it on and off and any time you use this button it shows the WLAN simple with a red line through it. No matter how many times you press it it does the same thing.I've tried uninstalling the drivers and reinstalling, ran a security update for the drivers. When I go into the wireless connection and try and turn it on it shows that it has a signal (not sure what to) but a red X next to the connection in windows 7. I can't actually see any wireless signals so I'm kind of at a loss.
View 5 Replies
View Related
Jan 30, 2012
I have a laptop that I usually use physically connected to my router, but sometimes I use it wirelessly when I want to lie down in bed.After using it wirelessly yesterday for about an hour,I brought it back to where I normally connect it with an ethernet cable but not I can't access the internet even with the ethernet cable plugged in! And wireless doesn't work either,I have "Limited or no Connectivity" for my LAN Connection and Wireless. I cannot afford a new computer (and I also doubt I need a new one).
View 6 Replies
View Related
Jan 17, 2013
In my LAN one computer shows limited connectivity
View 1 Replies
View Related
