Cisco WAN :: ASR1000 Router Supports Hot-swap Modules And Network Interfaces?
Sep 25, 2012The ASR1000 router supports hot-swap modules and network interfaces?
View 2 Replies
ADVERTISEMENT
Cisco WAN :: Hot-swap On ASR1000?
Sep 25, 2012The ASR1000 router supports hot-swap modules and network interfaces?
View 1 Replies View RelatedCisco Switching/Routing :: C3560 Swap Out Not Ping Across Network
Jun 17, 2012Had a switch die over the weekend, a c3560, per our normal procedure I pulled the hardware put a very basic config on it(vlans, portchannel, uplink ports, ip of management vlan, con and vty security, snmp, enable secret, and hostname). Then I use solarwinds orion to upload a copy of the old config to bring the switch back to the same state as the one that failed. Its a system that has worked for us 3 or 4 times in the past. But this time when the base config was on the box it couldnt ping across the network.I have tried clearing the arp cache and the dynamic mac tables, i verified the routing tables and even removed the 10.1.185.128/27 route and re-added it, saw the routing update go across to the other 65k, tried bouncing the edge switch(i cant bounce the 65k's), took down the po between the edge and 65k.
View 2 Replies View RelatedLinksys Wireless Router :: Swap Hard Drives On The E4200?
Aug 3, 2011Im looking to swap out my older 3.5" drive in an external enclosure for a Seagate - FreeAgent GoFlex Desk 2TB. Can I just drag and drop the 200+gb of files on my current drive to the new Seagate - FreeAgent GoFlex Desk 2TB? Or do I need to re configure the new drive in my web browser.
E4200 media server in .02 firmware
Cisco WAN :: ASR1000 MLS QoS Trust DSCP Under Router Platform Interface
Feb 13, 2013I want to know what the default behavior about the command 'mls qos trust dscp' under router platform interface. the router is ASR1000 series.we don't need to put above command line to trust dscp in case of router? otherwise, we have to add it as welll as like switch platform.
View 4 Replies View RelatedCisco Switching/Routing :: ASR1000 - Dual ISP Active / Active Connection On Single Router
Jun 10, 2012I am working on a network which has two ISP connections (Active/Active) terminating on router (ASR1000). From the LAN side (6500 switch) all the traffic need to be route on ISP1 but some of the specific subnets like 10.250.0.0/16 need to be route on ISP2 connection.
I am planning to use PBR and NAT with route maps. any documents or refrences are provided.
(access switches)---------(core switch)----------(routers)----------------(ISP1)
----------------------(ISP2)
Cisco :: How To Swap An Extension Number
Dec 24, 2012I'm working with a Cisco Unified CM 7.0There are sevral ip phones in the place.ach phone has a 3 digit extension tied to it. no matter where on the network that phone is plugged in that phone has the same extension. This is a problem because one phone (extension 134) is damaged and was swapped out with a phone that has extension 102. I want that phone that has extension 102 to have the extension 134 instead.So that is my problem. I must say I am merely a CCNA and I have no idea about this voip stuff. I thought it was a simple log in to the server and make a single change. boy was I wrong. I clicked on call routing, then I clicked on Directory number and I got a list of all the DNs. I then click on extension 102 and 134. I noticed the MAC of the respective phones was in a field titled associated devices. I then dissociated both phones thinking I could just associate the appropriate phones next. as soon as I hit save that entire section disappeared. Now those extension aren't tied to any phone and once more those phones now have no extensions. I am freaking out because I can't undo this. I've clicked on literally every single option inside this server. I am in way over my head. I will include a picture to illestrate what I am talking about.
View 6 Replies View RelatedCisco LAN :: 6509-e Best Way To Swap Out Supervisor Module
Mar 28, 2012We have a 6509-e (WS-C6509-E V04) with (4) (WS-X6148-GE-TX) 48 port modules and a supervisor 32 (WS-SUP32-GE-3B).We purchased a supervisor 720 (WS-SUP720-3B) and (2) (WS-6708-10G-3C) 8 port fiber modules and (1) WS-X6748-GE-TX)48 port module to add to the switch. My question is what is the best way to swap out the supervisor module? Can the SUP720 be added as a standby module so that the config can be transferred? Probably a long shot. Is there anything in this swap that I should be concerned with? The other three modules should be pretty straight forward.
View 4 Replies View RelatedCisco WAN :: 3925 Cannot Swap Hwic Without Reload
Dec 20, 2012I have cisco router 3925 and i add install HWIC-4ESW, as i sew on cisco documents you can hot swap the hwic without reload the router but i it's not working at all. How to do it ?
View 1 Replies View RelatedCisco Infrastructure :: Swap Fan In 3845 While It Is Running?
Oct 4, 2011Can you swap fan in 3845 while it is running?
View 1 Replies View RelatedCisco WAN :: SPA To Use For ATM DS3 On ASR1000 Routers
Jul 9, 2011Am trying to find out what is the suitable SPA for ASR1000 routers to connect ATM DS3 through the local telco. Currently this is connected to a NM-ATM-DS3 module on a C3845 router. The reason for asking is we need to upgrade the WAN router to ASR1000.
View 2 Replies View RelatedCisco WAN :: Using 3G HWIC On ASR1000
Jun 24, 2012I am looking for a way to use a 3G connexion on ASR1000.Is it possible to install HWIC module of ISR2 in SPA slot or use an USB modem on the RP?
View 2 Replies View RelatedCisco WAN :: IPv6 ISG On ASR1000
May 5, 2013We use ISG on asr1000 (l3 routed subscriber). Now we are trying to implement ipv6 isg sessions. so.. for ipv4 sessions we have
radius-server attribute 8 include-in-access-req
radius-server attribute 32 include-in-access-req but for ipv6 there is no such attribute#radius-server attribute ?
11 Filter-Id attribute configuration
188 Num-In-Multilink attribute configuration
218 Address-Pool attribute
25 Class attribute
30 DNIS attribute
31 Calling Station ID
32 NAS-Identifier attribute
4 NAS IP address attribute
44 Acct-Session-Id attribute
55 Event-Timestamp attribute
6 Service-Type attribute
60 CHAP-Challenge attribute
61 NAS-Port-Type attribute configuration
66 Tunnel-Client-Endpoint attribute
67 Tunnel-Server-Endpoint attribute
69 Tunnel-Password attribute
77 Connect-Info attribute
8 Framed IP address attribute
95 NAS IPv6 address attribute
list List of Attribute Types
nas-port NAS-Port attribute configuration
nas-port-id Nas-Port-Id attribute configuration
what is best practice for authorize ipv6 l3 subscribers ?
Cisco WAN :: ASR1000 Evc On Portchannel
Apr 11, 2013We have asr1006 with 2 esp-40 and 2 rp2 and 2 sip-40. we need to bridge vlan from portchannel (2*10) to single 10ge port.
So fn said that EVC on Port-Channel supported on our software and document [URL] have such example
- configure terminal
- interface port-channel channel-group
- service instance id ethernet
But on our router we have not service command on port-channel. only on non portchannel interface.
But other document have Restrictions for Configuring EVCs on the Cisco ASR 1000 Series Router The following features are not supported: EVC on Etherchannels
Connect ww port-channel 1 2 tenGigabitEthernet 0/1/0 2 this is possible command on our router (but i can't create service instance on portchannel interface)
We need to bridge l2 without l3 termination ? is this possible with port-channel ?
Cisco Switching/Routing :: Installing WS-X6724-SFP Hot Swap?
Nov 20, 2011I'm adding another module, WS-X6724-SFP, to our C6506E core switches. I read that it is hot swappable.
View 1 Replies View RelatedCisco :: ASR1000 CUBE SP Log Messages
Dec 6, 2012we're trying to integrate our SBC instances (CUBE SP on ASR1000) into our network management system (EMC SMARTS)Syslog messages from SBC instances are some kind of cumbersome with lot of line breaks resulting in multiple syslog messages the NMS must parse.How do I configure it to just put it all into one line just as "normal" log messages?
View 2 Replies View RelatedCisco :: ASR1000 Monitoring NAT Using Netflow 9
Feb 7, 2010I have a question regarding netflow and NAT. I have read some documentation (on ASR1000) regarding monitoring NAT process on Cisco ASR1000 that can be done using netflow version 9 (the term was called netflow event logging a.k.a NEL). The problem is, I have not found the netflow collector that can do that. I have queried several software such as manage engine "Netflow Analyzer" and Lancope, but they said their software can not do that.
View 11 Replies View RelatedCisco WAN :: How To Test Aaa Authentication On ASR1000
Dec 15, 2012How to test the aaa on cisco asr 1000 ? I wana test some user account to a cisco acs.
View 5 Replies View RelatedCisco Switching/Routing :: Get Fiber Optic Modules For 2821 Series Router
Mar 20, 2012How to get fiber optic modules for Cisco 2821 series router. I can not find anything apart a SFP module which contains only one SFP port.
View 9 Replies View RelatedCisco WAN :: 1900 Router Supports SNMPV3?
Feb 8, 2013We are using Cisco 1941 Router as CPE where we wanted to trap CPU, Memory & ISYSTEM MIB. The same we are achiveing using SNMPV2 but when we tried using SNMPV3, there is no response for these MIBs.
We tried to configure SNMPV3 using below Link but still there was issue. There was response fr [URL]
Wanetd to know SNMPV3 MIB are supported for Cisco 1941 Router IOS Code universalk 15.2(3)T1 & Data License. When we tried using Cisco IOS MIB Locator, we are not able to see any MIB for SNMPV3. whats is that mean. Does this Platform + IOS Support SNMPV3 or not.
Below is the Snapshot from Cisco IOS MIB Locator for said image.
[Code]......
Cisco WAN :: SRP547W Router That Supports Bonjour
Jan 22, 2013I have a small network of about 12 Mac's running OS X, about 20 or so iOS devices and a OS X Server. Currently i have a Cisco SRP547W which works fine when we're all wired in, however we have connection issues when trying to access the server over Wi-Fi. I'm lead to believe that this could be a result of the lack of support for Bonjour within the router. What might be a solid alternative?
View 1 Replies View RelatedCisco Switching/Routing :: Shutdown 4507r-e And Just Swap Out Blade?
Apr 2, 2012If i replace a card of the same type in the same slot will I lose the configuration for that card or does it live in the backplane of the device?Is there any special command I need to run to replace the card or can i shutdown the 4507r-e and just swap out the blade?
View 3 Replies View RelatedCisco Firewall :: Swap BootVAR On 5505 Without Affecting Activation Key
May 11, 2013If I could swap around the bootvar on my 5505 without affecting the activation key.this is to learn different NAT on pre and 8.3+ IOS.
# sh bootvar
BOOT variable = disk0:/asa825-26-k8.bin
Current BOOT variable = disk0:/asa825-26-k8.bin
CONFIG_FILE variable =
Current CONFIG_FILE variable =
[code].....
Cisco Switching/Routing :: Swap With Backup Switch WS-2950T
Jan 8, 2013my 2970 having intermittent problem. i would like to swap with my backup switch WS-2950T. when i try to configure the 2950 following the 2970 config, i unable to perform this command "switchport trunk encapsulation dot1q". does 2950T does not support this command??
View 8 Replies View RelatedCisco WAN :: Embedded Packet Capture On ASR1000
Oct 30, 2012I'm trying to use EPC on ASR1001 running IOS-XE 3.4, and it won't work. Configuration commands are accepted by the router, but there are no packets in the capture buffer.In release notes for IOS-XE, in the 2.5 section, there is a statement that EPC is not supported on ASR1k. Is it true also for newer versions of IOS-XR?
View 1 Replies View RelatedCisco WAN :: ASR1000 Will It Still Possible To Run VPLS Over Dark Fiber
Jul 7, 2012One of our customer would like to connect 3 datacentres and decided to use VPLS to extend layer 2 VLANs . For this purpose they have bought six Cisco ASR1000 edge routers( two at each side).They also wanted to buy MPLS SP backbone but have decided to buy 2x10G dark fibre links instead.My question is,
1-Will it still possible to run VPLS over dark fibre? Because all the documents I read regarding VPLS are deployed over MPLS backbone.
2-Any sample configuration for implementation VPLS in ASR1000 ?
Cisco WAN :: Gigabit Ethernet Ports On ASR1000?
Mar 6, 2013how the ASR1000s are being setup.I am looking at ASR1000s as part of network refresh and was looking at RJ-45 based Gigabit Ethernet ports compatible with the ASR1000s SPA-5X1GE-V2 seems to be an option but they are all SFPs. Are there any options for RJ-45 ones on ASR1000s?
There is an option for the 2 port where one can mix and match SFPs and RJ45 but I was looking for something which is RJ45 only.Are there any options for them available.I know I could get something with FastEthernet type but was looking for the GigabitEthernet type.
Cisco WAN :: ASR1000 Multi-link PPPoE With LFI
Mar 26, 2013I'm trying to find out what platforms support Multilink PPP with Link Fragmentation and Interleaving over a single link, when that single link is PPPoE. In searching the documentation, the best information I can find is that it seems to be supported in one direction on the ASR1000 url...Many platforms appear to support PPPoE and also MLPPP w/LFI, but it's not clear that both features are supported on the same link.
The application is a radio that has an Ethernet interface on its terrestrial link, and acts as an Ethernet bridge. Would like to use Multilink PPPoE with LFI in order to provide LFI in order to run VoIP over lower speed links (e.g 256kb). For what it's worth, the radio also supports RFC 5578 PPPoE Extensions for Credit Flow and Link Metrics. It was fairly easy to find what platforms support RFC 5578. But RFC 5578 would be used to support variation in the capacity of the link. If the link speed is fixed, RFC 5578 is not needed. I was trying to find if the set of platforms supported increase if the need for RFC 5578 is taken off the table.
In particular, I'd be interested in the whether the ASR 9000 series supports MLPPP bundles with LFI when the links are PPPoE.
Cisco VPN :: 7206VXR - What Router Chassis Supports SM-VAM2+
Jun 17, 2012I work for a non-profit agency and a donor gave us a generous donation of used Cisco equipment. One of the items is a SM-VAM2+. We tried it in a 7206VXR chassis with a NPE-G2 running 12.4(24)T6 and the router keeps barking that the SM-VAM2+ is not supported in the chassis. We have done searches on the Cisco web site and Google and there is no information regarding the SM-VAM2+ at all (all of the references are for the SA-VAM2+).
The question is if the SM-VAM2+ is supported on the 7206VXR with another version of IOS or what router supports the SM-VAM2+?
Wireless Router That Supports Free DDNS?
Jan 13, 2012Is there a wireless router available that will support a free dynamic DNS provider such as [URL], without the need for custom firmware?
I have a device that requires DDNS, and I do not want to mess with firmware updates. I've already bricked a router trying to do that. So I'm looking for a replacement router that requires little to no modifications to use a free DDNS provider.
Linksys Wireless Router :: E3000 - ISO Router That Supports SNMP
Dec 2, 2012Which routers support SNMP? I need to track usage coming through our network/router. Our internet co claims we are using at least double what our computer tracking software says. We currently have the E3000.
View 5 Replies View RelatedCisco LAN :: 2921 - Use Two Interfaces On Same Network?
Apr 22, 2013I actually starting to work on a cisco project. I'm a beginner on networking and cisco technologie.
For my project we use a router 2921.
We got two network:
- Network A: 192.198.0.X / 255.255.255.0 / Gateway 192.198.0.1
- Network B: 162.168.0.X / 255.255.0.0 / Gateway 162.168.0.1
Each network use switch, Switch A (connecting to network A) is connected to interface G0/0. And Switch B (connecting to network B) is connected to interface G0/1.
Router well configured as:
- G0/0: ip address 192.198.0.1 255.255.255.0 (network A)
- G0/1: ip address 162.168.0.1 255.255.0.0 (network B)
Every think working fine.
The problem is with this one, we need to connect a computer on G0/2. This computer is configure as network A (192.198.0.10 / 255.255.255.0 and same gateway).I can't configure G0/2 as 192.198.0.1 255.255.255.0 (network A), cause G0/0 use this adresse.I can't put this computer on the switch A, my only physical possibilité is to connect him on G0/2.We just need to use interface G0/0 and G0/2 as a switch on the router with the same gateway (192.198.0.1)
How can i connect this computeur? How can i configure two interfaces on the same network and same gateway?
Cisco Switching/Routing :: 4506 Hot Swap 100M Card With Gig Module
Oct 18, 2012If you hot swap a 100M card with a Gig module in a live 4500 switch, what happens to the running-config? Don't have the module versions to hand.
View 2 Replies View Related
