Cisco WAN :: Configuration Done With Two ISP Routers Connected To 3550
Dec 26, 2012
We have a customer who has a network consisting of two ISPs, one as a primary and the other as a backup. The customer would like us to use HSRP for the failover. The problem is the customer wants the configuration done with the two ISP routers connected to a 3550. He is under the impression that it can be done this way. ISP 1 []--------[_]3550------[] ISP2. From my understanding of HSRP can only be done with Cisco router and not ISP routers.
View 3 Replies
ADVERTISEMENT
Sep 27, 2011
Cisco 3550 and when I do a sh int fa0/1 and the status does not show last input or last output. Is a 3550 have a configuration that needs to be set?
View 0 Replies
View Related
Oct 21, 2012
I have ASA config with DHCP and its providing IP to users. ASA is connected to 3550 switch it has direct connection or say default static route. From 3550 switch connection goes to Router and it does the NAT and has connection to outside world.
My question is do i need to configure the NAT inside and global (outside ) on the ASA or not? As per my understanding NAT is done by router which has connection to ISP.
View 11 Replies
View Related
May 5, 2012
I have a network with static routes witch I need to convert to OSPF.Never used OSPF, and do not have much experience in routing in general.The netvork is connected via some fiber links, but moastly wireless bridges.I have attached a drawing of how the network is.Routers are 3550, 3560 and 3750s.Each router is on a different physical site.
View 2 Replies
View Related
Jan 10, 2012
I am using multiple cisco 2811, 3745 routers and 2950,3550 switches if I need to copy running configuration I have to go to each device and say copy run tftp: <address> Is here any way that automatically by schedule one a week or a month configuration copy from all devices to tftp server?
View 2 Replies
View Related
Oct 29, 2012
i have 2 routers with a switch and pc connected to the switch. i am working on RIP and i enabled it on both routers.
my current set up is this:
PC---Switch(3550)---Router2(2610)---Router1(2610)--- Cable modem
I am able to ping from pc to Router1. I am able to ping 4.2.2.2 and google from Router1 but unable to ping it from Router 2 and pc.
Here is my config for Router1:
Current configuration : 1089 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
[code].....
View 5 Replies
View Related
Feb 5, 2013
Recently I have installed and configurated an AP 1260, it has already IP, SSID, and ping to the router, but after install the antenna I open the web configuration and see that it has 0 clients connected and the light is always green, indicated as only is configurated with nobody connected.
Tha radio setting is up, 2,4 Ghz and 5 Ghz any issue with the antenna? or i need to configure anything else?
View 1 Replies
View Related
Jan 19, 2011
computer was working fine a few days ago, all of the sudden not able to get online anymore at all,recieve error message 651 with dsl connection, and when trying to connect to wireless get an error message saying invalid ip adress configuration,
ipconfig/all reveals:
C:Usersygydfre>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : bygydfre-PC[code]......
View 14 Replies
View Related
Jun 11, 2013
I have 30 switched in my corporate network it’s all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.
View 9 Replies
View Related
Nov 10, 2012
We have a standard surfboard modem and a standard wired router. I recently purchased a wifi-only tablet thinking I could connect to an ad-hoc hotspot. This however isn't the case and now I can't use my tablet at home.I'm going to buy an inexpensive wifi router and just have that dedicated for my tablet. I've read that you can connect a wifi router into a wired router, but it requires a lot of mucking about with the settings. Then I remembered the USB connections that modems and routers have.can you have one wired router connected to the modem via a standard cable and also have a wifi router connected to the same modem via a USB cable?
View 3 Replies
View Related
Feb 16, 2012
After nothing but hassles with my Linksys WAG120N, I bought a Cisco RV110W. Yesterday, I tried setting it up with the Linksys being used only as a modem. I was unable to though because when I entered 192.168.1.1 into my browser as per the Cisco setup instructions, I was taken to the admin login for the Linksys. This seemed odd to me, because the Linksys was not connected to the PC at all. The connection setup was exactly as specified in the RV110W instructions: modem connected to dsl line, ethernet cable from modem (Linksys WAG120N) to the slot marked "WAN" on the RV110W, another ethernet cable from RV110W to my PC. Despite this, the admin page was for the linksys not the cisco.
Today, I exchanged the WAG120N for a Netgear DM111P, just a modem, not a router. Same setup configuration: modem connected to dsl line, ethernet cable from modem (NetgearDM111P) to the slot marked "WAN" on the RV110W, another ethernet cable from RV110W to my PC. Same result - type in 192.168.1.1 and get taken to the admin page for "Netgear DM111P" .
View 6 Replies
View Related
Aug 30, 2012
How to discover how many routers are withing a network using ip config or simple windows tool /command
View 1 Replies
View Related
Mar 28, 2013
On the System Summary screen in the Port Statistics table when you click on one of the Connected links the pop open window does not show the IP address of the connected device when using IPv4. Where can I find this?
If the devices are using static IP addresses and not getting them from the DHCP server they do not show in the Client Table under DHCP Status.
If they are know MAC addreses because they have been assigned to static IPs on the DHCP setup screen they will not show up in the Uknown MAC Addresses pop up window.
View 1 Replies
View Related
Aug 14, 2011
went to change my nat type,did something wrong, reset all defaults but now my router is not connected to the internet
View 1 Replies
View Related
Jan 18, 2013
I have a Belkin N450BD that doesn't seem to want to connect with my Siemens modem. The WLAN cable is connected to the WLAN port on my router but the WLAN light on the modem doesn't illuminate.
View 1 Replies
View Related
Feb 1, 2013
N750DB status light is constant amber, router says I am not connected to the internet, but everything on my network is connected and can access the internet.
View 1 Replies
View Related
Oct 13, 2011
I currently have a RV220W connected over PPTP to the internet. I want to connect with an RV042 with a fixed IP Address.The connection is working, but I always have to add a static route to the remote IP-Adress that I can transmit data.Since my own IP Adress is a dynamic one that changes every day I have to enter every day in the static route as gateway adress the new WAN IP Address.
View 4 Replies
View Related
Jan 12, 2013
On rv110w, I have 4 vlans. vlan3 feeds a dumb switch and a Wireless AP. When looking at router DHCP leases, it shows devices connected that are not connected. Kinda like it doesn't refresh the list. Set to 50 leases. Questions: Is this normal? How often should it refresh? Is the DHCP time put in as minutes???
View 11 Replies
View Related
Nov 26, 2011
I just bought a WRVS4400N last week to replace my existing LinkSys WRH54G. To my disappointment, I now have a problem that this router halts everytime any eMule/P2P client is connected for more than 15~30 minutes, no matter the uPNP is enabled or not, When it halts, the only thing to get it work is to unplug its power cable then back on. So, I then upgraded its firmware from 2.0.1.3 to 2.0.2.1, but the problem still persists. However, the truth is that this problem never happened on my WRH54G
View 4 Replies
View Related
Feb 15, 2011
my RV042 is not able to propperly update my ddns. If you try to resolve my dyndns subnet kitus-network.dyndns.org you will get 192.168.0.2. How can I make the router update my ddns with the real public ip rather than the private ip it "sees" on the WAN interface?
View 5 Replies
View Related
May 6, 2012
Bluetooth and wireless internet is connected with my DELL laptop but lan internet(with wire) is not being connected with my DELL laptop. How can I able to connect it?
View 2 Replies
View Related
Sep 16, 2011
We are having a workgroup of 12 Pc connected using a switch (hub) having all Windows XP SP2 and some of them registered Kayspersky antivirus 2011. We have internet access using D-Link 2460T (DSL wireless ADSL router) connected to our LAN using a network wire and having DHCP enabled. Everything was working well for 4-5 years but recently a problem appeared.
[code]...
View 10 Replies
View Related
Jan 27, 2012
I'm planning to set up a network with two routers and one cable connection. One router will be for public wifi at my business and the other will be for my Point of sale system and private use. I think I have it figured out but want to double check the set up. Someone tell me if this isn't correct or if there's a better way of doing it.Cable modem --> connect via ethernet to Router #1 WAN port. Router #1 Lan port 1: connect via ethernet to router #2 WAN. Now, router 1 and 2 will have two different subnets; 192.168.1.x and 192.168.2.x respectively. Router #2 is the one that I should use for my private network and for the POS system since it can't be accessed by users from router #1 correct? I have DD-WRT installed on both routers but I plan on putting Tomato firmware for router #1 to limit bandwidth for public wifi and keep DD-WRT installed for router #2.
View 1 Replies
View Related
Apr 24, 2013
I purchased the Belkin N600DB, but I can't seem to find a way to reserve IP addresses for my connected devices. I need to run a server through the router, but (naturally) it keeps changing my local IP address. I cannot find the reservation utility.
View 1 Replies
View Related
Jan 8, 2013
saying not connected when on router set up....when Ethernet is connected to laptop and router? n -router model f5d8236-4 v2
View 3 Replies
View Related
Jan 26, 2013
Newer router purchased in Sept. 2012, can't get laptop connected to it.
View 1 Replies
View Related
May 20, 2012
i was planed to make a vpn over rv042 so i get the rv042 connected behind a thosmon 456(configured as a bridge) and 1 static ip ... and i configured the vpn and worked great ...but due to some circumstance i get a package of 6 ips insted of the old ip , so when i try to configure the router with the ISP they but the wan ip 10.232.x.x and told me that an internal ip from there lan ... and give me the 6 ip of 196.x.x.x to use as 1 for internal interface for the rv042 and 5 for the pc's,now the vpn not working anymore...notice: when try to configure the vpn tunnle in the local securty setting i mark the ip only and the ip that abear is the wan ip 10.232.x.x but i can't ping that ip beside i can ping the internal ip of the router 196.x.x.50does rv042 can support static and virtual ip inside the lan |! can i configure the thomson as pppoe and use one static ip from 196.x.x.x as wan ip for it ... and use anther 196.x.x.x ip for the rv042 to get access from outside and connect the lan to the rv042 with internal ip 192.168.x.x ...so i can access the vpn from outside .....and can connect the device i need to use static ip to the thomson ...
View 0 Replies
View Related
Apr 19, 2012
I am looking to configure RV042 for VPN access to local machines and Win 2008 server. The story: Had issues with remote printers being created for clients logging into old Linksys RV042 with Linksys VPN software. First Tech exposed server without security, and it had to be removed as it was being attacked, but did not fix printing issue. 2nd tech could not get VPN to work after 1st tech. 3rd tech, 4hours, and I got that the router is a piece of ... So I'm out over 1000, and not able to have a simple router set up. The present situation. New RV042 with firmware V4.1.1.01, using Cisco VPN client 5.0.07.0410, most XP 32 bit machines coming into network, one 64 bit win 7. My clients have been unable to access their data for too long.
View 3 Replies
View Related
Jul 25, 2012
I am struggling to configure my new RV180w router to accept a VPN connection from my Apple computers.
I wish to use IPSec with Group and Pre-Shared Key authentication. The RV180 has just replaced my 800 series ADSL router and I want my remote clients to be able to connect using either the VPN client capability built into the OS X operating system or the Cisco VPN Client software installed on their Macs.
So far, using the RV180's web setup screens, I have created a VPN Policy and a corresponding IKE Policy was created as well. I couldn't see anywhere to include the 'Group' name. I have created a user but wasn't sure of which Protocol to use so I am trying XAUTH.
At the client end some people are connecting using Cisco's VPN Client software Download Software - Cisco Systems
Some people, with OS X 10.6 and above, are using the Mac OS X network built-in VPN client.
We all connected without a problem to the previous 800 series router using IPSec with Group authentication and Pre-Shared key.
View 5 Replies
View Related
Jun 15, 2011
I'm trying to setup a VPN tunnel between a Cisco RVS4000 on our side and a Cisco ASA5520, to connect a machine on our local network to a test server on the target side.
We have all the settings setup correctly and the tunnel is up and running, however, our local machine can't connect/ping to their server. I've tried a trace route both from the machine and from the RVS4000 itself, and they both get stuck after getting past 192.168.1.1. Is there any routing or NAT-ing that I need to do on our router? Or is there a problem somewhere else?
View 7 Replies
View Related
Jul 2, 2012
Cisco srp521w router vpn configuration. company has wan static ip to router. enable vpn Cisco server in router. connected with Cisco vpn client. route failed in log. Need to access a PC on the company site with address 192.168.15.105 and router with gateway 192.168.15.1.
How do i configure ip pool ? different ip address? if i connect how do i access pc 192,168.15,105 ? remote pc with 192.168.1.100.
View 2 Replies
View Related
Sep 26, 2012
I am trying to split traffic entering from the web for servers so everything goes over the ADSL link but time sensitive information such as Sharepoint (TCP80) go direct over the ESHDSL link, now the problem is traffic that enters through the ESHDSL hits the server, the server replies out of its default gateway which is the ADSL which doesnt know what to do since it does not have a NAT entry for its return path.
How can I make it so traffic can enter one router and exit the other?
The two routers have HSRP to provide fail over between the two, and BGP is setup so one BGP route goes ESHDSL-ADSL and the other ADSL-ESHDSL
The routers are a 877M-SEC-K9 and a 881-SEC-K9
View 1 Replies
View Related
Jun 29, 2012
I have just purchased the RV042 and while it is working great on WAN1 over Xfinity/Comcast broadband, I'm unable to get it working with my AT&T DSL for WAN2. I am planning on running this in failover mode - not load balancing.
The DSL modem it is connected to is a SpeedStream (hooking up laptop directly works etc. etc.). The SpeedStream is set to PPOE authentication passed in via the computer (in this case the RV042). On the RV042 side, I set it to use PPOE, using the credentials as given my AT&T DSL. The DNS servers are set to the ones recommended
View 4 Replies
View Related
